reading. (This was already done for writing to a sysctl). This
requires all SYSCTL setups to specify a type. Most of them are now
checked at compile-time.
Remove SYSCTL_*X* sysctl additions as the print being in hex should be
controlled by the -x flag to sysctl(8).
Succested by: bde
retrieving individual OIDs. This allows the same list of OIDs to be
passed to sysctl(8) across different systems where particular OIDs may not
exist, and still get as much information as possible from them.
PR: bin/123644
Submitted by: dhw
Approved by: ed (mentor)
MFC after: 2 weeks
Right now sysctl just prints the major/minor numbers of a device.
Instead of rolling our own routine for this, we'd better just call
devname(3) to perform a translation to a device name for us.
Don't clobber *p with '\0' when testing whether it has the value of 'F'.
Just use the semantics of strtof() properly. If it returns p, we know
that it parsed the string until it reached 'C' or 'F'.
The code has not changed since it has been imported (r161951, Sep 3,
2006).
Submitted by: Alexandre Perrin <kaworu@kaworu.ch>
MFC after: 1 week
others. In the case where it displayed warnings it would still return
succesfully. Modify it so that it returns the number of sysctls that
it was not able to set.
Make use of this in rc.d to display only *unsuccessfull* attempts to
set sysctls.
This commit includes the following core components:
* sample configuration file for sensorsd
* rc(8) script and glue code for sensorsd(8)
* sysctl(3) doc fixes for CTL_HW tree
* sysctl(3) documentation for hardware sensors
* sysctl(8) documentation for hardware sensors
* support for the sensor structure for sysctl(8)
* rc.conf(5) documentation for starting sensorsd(8)
* sensor_attach(9) et al documentation
* /sys/kern/kern_sensors.c
o sensor_attach(9) API for drivers to register ksensors
o sensor_task_register(9) API for the update task
o sysctl(3) glue code
o hw.sensors shadow tree for sysctl(8) internal magic
* <sys/sensors.h>
* HW_SENSORS definition for <sys/sysctl.h>
* sensors display for systat(1), including documentation
* sensorsd(8) and all applicable documentation
The userland part of the framework is entirely source-code
compatible with OpenBSD 4.1, 4.2 and -current as of today.
All sensor readings can be viewed with `sysctl hw.sensors`,
monitored in semi-realtime with `systat -sensors` and also
logged with `sensorsd`.
Submitted by: Constantine A. Murenin <cnst@FreeBSD.org>
Sponsored by: Google Summer of Code 2007 (GSoC2007/cnst-sensors)
Mentored by: syrinx
Tested by: many
OKed by: kensmith
Obtained from: OpenBSD (parts)
a warning, return 1 instead of 0 to indicate that we didn't print
anything, so that top-level callers don't print a spurious newline.
This is mainly to fix output formatting when stderr is redirected. It
also helps in some cases when stderr is interleaved with stdout,
depending on the details of the interleaving (this program has the
usual null explicit support for syncing stderr with stdout).
Return 1 instead of -1 after printing the "malloc failed" warning, since
the return value is boolean.
value into a variable of the right type and then printing it via
an intmax_t. This makes avoids some duplication and makes it easy
to add a new integer format Q for printing things of type CTLTYPE_QUAD.
them unsigned I made the possible overflows hard to detect,
and it only saved 1 bit which isn't principal, even less now
that the underlying issue with the total of virtual memory has
been fixed. (For the record, it will overflow with >=2T of
VM total, with 32-bit ints used to keep counters in pages.)
- While here, fix printing of other "struct vmtotal" members
such as t_rq, t_dw, t_pw, and t_sw as they are also signed.
Reviewed by: bde
MFC after: 3 days
- Fix overflow bugs in sysctl(8), systat(1), and vmstat(8)
when printing values of "struct vmmeter" in kilobytes as
they don't necessarily fit into 32 bits. (Fix sysctl(8)
reporting of a total virtual memory; it's in pages too.)
the BUGS section of the alloca(3) manpage. In particular, when
the number of TCP sockets is several tens of thousand, trying to
"sysctl -a" would SIGSEGV on the net.inet.tcp.pcblist entry (it
would exceed the stacksize ulimit, in an undetectable manner).
Reported by: Igor Sysoev
(1) Reject zero-length strings for CTLTYPE_INT, _UINT, _LONG,
_ULONG. Do not silently convert to 0.
(2) When converting CTLTYPE_INT, _UINT, _LONG, and _ULONG, check the
end pointer generated by strtol() and strtoul() rather than
discarding it. Reject the string if either none of the string
was useful for conversion to an integer, or if there was
trailing garbage.
I.e., we will not allow you to set a numeric sysctl to a value unless
we can completely convert the string argument to a numeric value.
I tripped over this when I put the following in /etc/sysctl.conf:
kern.maxfiles="4000"
Ouch.
by Sheldon.
For a detailed description look at the commit log for sysctl.c
rev.1.42 -- i do not think it is appropriate to put the full
description in this manpage, and the "boot" and "loader" manpages
where this description might go are also missing a description of
a number of similar variables, so i think this it is ok to limit
documentation to this now, and update it later when I (or someone
else) have a chance to revise "boot" and "loader".
machdep.guessed_bootdev, and add code to sysctl to parse its value
and give a (not necessarily correct) name to the device we booted
from (the main motivation for this code is to use the info in the
PicoBSD boot scripts, and the impact on the kernel is minimal).
NOTE: the information available in bootdev is not always reliable,
so you should not trust it too much. The parsing code is the same
as in boot2.c, and cannot cover all cases -- as it is, it seems to
work fine with floppies and IDE disks recognised by the BIOS. It
_should_ work as well with SCSI disks recognised by the BIOS.
Booting from a CDROM in floppy emulation will return /dev/fd0 (because
this is what the BIOS tells us).
Booting off the network (e.g. with etherboot) leaves bootdev unset so
the value will be printed as "invalid (0xffffffff)".
Finally, this feature might go away at some point, hopefully when we
have a more reliable way to get the same information.
MFC-after: 5 days
a special file on the command line, eg:
sysctl kern.dumpdev=/dev/ad1s1b
In parse(), when a value is given for a CTLTYPE_QUAD variable,
newval and newsize erroneously fail to be set because of an early
"break".
show_var() contains code that duplicates the functionality of the
oidfmt() function.
PR: 33151, 33150
Submitted by: Thomas Quinot <thomas@cuivre.fr.eu.org>
variables. Use the -d flag in sysctl(8) to see this information.
Possible extensions to sysctl:
+ report variables that do not have a description
+ given a name, report the oid it maps to.
Note to developers: have a look at your code, there are a number of
variables which do not have a description.
Note to developers: do we want this in 4.5 ? It is a very small change
and very useful for documentation purposes.
Suggested by: Orion Hodson
such a way that the name and the value of the variable(s) are separated
with `=' instead of the usual `: '. This is useful for producing output
that can be fed back to the sysctl utility (pasted to sysctl.conf, for
example).
Reviewed by: rwatson
Approved by: markm
MFC after: 2 weeks
blackhole(4), except that blackhole(4) uses sysctl's. This xref
obviously isn't appropriate unless we want to xref all the other man
pages which mention sysctls, which we obviously don't (we may want to
list those sysctls, but that's another story).
PR: 27937
Submitted by: yar
- introduce a -o option that displays opaque variables.
- introduce a -x option that displays opaque variables in full.
- deprecate -A in favor of -ao and -X in favor of -ax.
- remove -A and -X from usage() and SYNOPSIS (but not from DESCRIPTION).
- ignore -a if one or more variables were listed on the command line.
- deprecate -w, it is not needed to determine the user's intentions.
- some language and style cleanup in the man page.
This commit should not break any existing scripts.
MFC after: 4 weeks
