Commit Graph

1027 Commits

Author SHA1 Message Date
Bryan Drewery
28da7a2559 Revert r317432 and add a new entry for r316527.
Requested by:	imp
2017-04-26 16:50:54 +00:00
Bryan Drewery
cae0551ba3 Remove entry for r304436 removed in r316527.
Sponsored by:	Dell EMC Isilon
2017-04-26 00:41:18 +00:00
Brooks Davis
a25a1ff466 Document the removal of NATM.
Relnotes:	yes
2017-04-24 21:27:37 +00:00
Baptiste Daroussin
a17665bcef Replace again GNU diff with BSD diff
After a firts failed attempt, BSD diff is now good enough to replace
GNU diff.

Relnotes:	yes
2017-04-20 19:24:51 +00:00
Jens Schweikhardt
a3a09aef5d Correct minor grammos; minor white-space fixes. 2017-04-14 12:54:39 +00:00
Cy Schubert
0cad3eca15 Add missing bracket (typo). 2017-04-14 05:32:03 +00:00
Cy Schubert
5810e45bfb Document change in (incorrect) ipfilter behaviour fixed by r316810.
Keep frags can be used with keep state independently.
2017-04-14 05:25:40 +00:00
Ed Maste
1bf5e133cb do not require binutils port when using lld as ld
r279908 added logic to Makefile.inc1 to automatically set
CROSS_BINUTILS_PREFIX for architectures not supported by the in-tree
binutils: arm64 when first introduced, and later riscv64 as well.

LLVM's LLD linker is now included in the base system, and is enabled by
default for arm64 and capable of linking world and kernel. Thus, avoid
automatically setting CROSS_BINUTILS_PREFIX and requiring the binutils
port if WITH_LLD_IS_LD is true.

Reviewed by:	kan
Relnotes:	Yes
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D10310
2017-04-07 23:37:22 +00:00
Steven Hartland
4d806fc663 Allow explicitly assigned IPv6 loopback address to be used in jails
If a jail has an explicitly assigned IPv6 loopback address then allow it
to be used instead of remapping requests for the loopback adddress to the
first IPv6 address assigned to the jail.

This fixes issues where applications attempt to detect their bound port
where they requested a loopback address, which was available, but instead
the kernel remapped it to the jails first address.

This is the same fix applied to IPv4 fix by: r316313

Also:
* Correct the description of prison_check_ip6_locked to match the code.

MFC after:	2 weeks
Relnotes:	Yes
Sponsored by:	Multiplay
2017-03-31 09:10:05 +00:00
Steven Hartland
6ebc1b7b7d Allow explicitly assigned IPv4 loopback address to be used in jails
If a jail has an explicitly assigned loopback address then allow it to be
used instead of remapping requests for the loopback adddress to the first
IPv4 address assigned to the jail.

This fixes issues where applications attempt to detect their bound port
where they requested a loopback address, which was available, but instead
the kernel remapped it to the jails first address.

A example of this is binding nginx to 127.0.0.1 and then running "service
nginx upgrade" which before this change would cause nginx to fail.

Also:
* Correct the description of prison_check_ip4_locked to match the code.

MFC after:	2 weeks
Relnotes:	Yes
Sponsored by:	Multiplay
2017-03-31 00:41:54 +00:00
Enji Cooper
0458b2654a Add an UPDATING entry for cfiscsi(4)'s addition in r316212
MFC after:	2 months
X-MFC with:	r316212
Requested by:	mav (D10099)
Sponsored by:	Dell EMC Isilon
2017-03-30 05:11:58 +00:00
Baptiste Daroussin
2c5ddcf8b6 Temporary readd GNU diff
etcupdate requires --change-group-format it is not easy to implement
in bsd diff so for now readd GNU diff
2017-03-19 17:19:59 +00:00
Marius Strobl
72dec0792a - Add support for eMMC "partitions". Besides the user data area, i. e.
the default partition, eMMC v4.41 and later devices can additionally
  provide up to:
  1 enhanced user data area partition
  2 boot partitions
  1 RPMB (Replay Protected Memory Block) partition
  4 general purpose partitions (optionally with a enhanced or extended
    attribute)

  Of these "partitions", only the enhanced user data area one actually
  slices the user data area partition and, thus, gets handled with the
  help of geom_flashmap(4). The other types of partitions have address
  space independent from the default partition and need to be switched
  to via CMD6 (SWITCH), i. e. constitute a set of additional "disks".

  The second kind of these "partitions" doesn't fit that well into the
  design of mmc(4) and mmcsd(4). I've decided to let mmcsd(4) hook all
  of these "partitions" up as disk(9)'s (except for the RPMB partition
  as it didn't seem to make much sense to be able to put a file-system
  there and may require authentication; therefore, RPMB partitions are
  solely accessible via the newly added IOCTL interface currently; see
  also below). This approach for one resulted in cleaner code. Second,
  it retains the notion of mmcsd(4) children corresponding to a single
  physical device each. With the addition of some layering violations,
  it also would have been possible for mmc(4) to add separate mmcsd(4)
  instances with one disk each for all of these "partitions", however.
  Still, both mmc(4) and mmcsd(4) share some common code now e. g. for
  issuing CMD6, which has been factored out into mmc_subr.c.

  Besides simply subdividing eMMC devices, some Intel NUCs having UEFI
  code in the boot partitions etc., another use case for the partition
  support is the activation of pseudo-SLC mode, which manufacturers of
  eMMC chips typically associate with the enhanced user data area and/
  or the enhanced attribute of general purpose partitions.

  CAVEAT EMPTOR: Partitioning eMMC devices is a one-time operation.

- Now that properly issuing CMD6 is crucial (so data isn't written to
  the wrong partition for example), make a step into the direction of
  correctly handling the timeout for these commands in the MMC layer.
  Also, do a SEND_STATUS when CMD6 is invoked with an R1B response as
  recommended by relevant specifications. However, quite some work is
  left to be done in this regard; all other R1B-type commands done by
  the MMC layer also should be followed by a SEND_STATUS (CMD13), the
  erase timeout calculations/handling as documented in specifications
  are entirely ignored so far, the MMC layer doesn't provide timeouts
  applicable up to the bridge drivers and at least sdhci(4) currently
  is hardcoding 1 s as timeout for all command types unconditionally.
  Let alone already available return codes often not being checked in
  the MMC layer ...

- Add an IOCTL interface to mmcsd(4); this is sufficiently compatible
  with Linux so that the GNU mmc-utils can be ported to and used with
  FreeBSD (note that due to the remaining deficiencies outlined above
  SANITIZE operations issued by/with `mmc` currently most likely will
  fail). These latter will be added to ports as sysutils/mmc-utils in
  a bit. Among others, the `mmc` tool of the GNU mmc-utils allows for
  partitioning eMMC devices (tested working).

- For devices following the eMMC specification v4.41 or later, year 0
  is 2013 rather than 1997; so correct this for assembling the device
  ID string properly.

- Let mmcsd.ko depend on mmc.ko. Additionally, bump MMC_VERSION as at
  least for some of the above a matching pair is required.

- In the ACPI front-end of sdhci(4) describe the Intel eMMC and SDXC
  controllers as such in order to match the PCI one.
  Additionally, in the entry for the 80860F14 SDXC controller remove
  the eMMC-only SDHCI_QUIRK_INTEL_POWER_UP_RESET.

OKed by:	imp
Submitted by:	ian (mmc_switch_status() implementation)
2017-03-16 22:23:04 +00:00
Andrey V. Elsukov
6ed1473867 Change the syntax of ipfw's named states.
Since the state name is an optional argument, it often can conflict
with other options. To avoid ambiguity now the state name must be
prefixed with a colon.

Obtained from:	Yandex LLC
MFC after:	2 week
Sponsored by:	Yandex LLC
2017-03-15 13:36:35 +00:00
Emmanuel Vadot
f7c237746b Document the removal of radeon and i915 old drm driver done in r315045.
Reported by:	linimon
2017-03-11 05:12:39 +00:00
Baptiste Daroussin
3bbe3f672e Import diff from OpenBSD and remove GNU diff
Some of the modifications from the previous summer of code has been integrated
Modification for compatibility with GNU diff output has been added

Main difference with OpenBSD:
Implement multiple GNU diff options:
* --ignore-file-name-case
* --no-ignore-file-name-case
* --normal
* --tabsize
* --strip-trailing-cr
Make diff -p compatible with GNU diff
Implement diff -l
Make diff -r compatible with GNU diff

Capsicumize diffing 2 regular files
Add a simple test suite

Approved by:	AsiaBSDcon devsummit
Obtained from:	OpenBSD, GSoC
Relnotes:	yes
2017-03-11 05:01:29 +00:00
Pedro F. Giffuni
25ef829b03 Revert r314669, r314670:
Bring back the i486 option in GENERIC by default.

The code related to i386 CPU variants configuration has received many
changes in the last years: most of the features are detected automatically,
so there are no performance penalties from keeping the 486 support enabled.

Re-instate the 486 support: while the general configuration could still be
cleaned a bit, there is no advantage in removing it.

Differential Revision:	https://reviews.freebsd.org/D9879
2017-03-06 03:52:15 +00:00
Pedro F. Giffuni
b07e2e3e66 Add UPDATING entry per r314669: removal of classic i486 configuration. 2017-03-04 15:23:06 +00:00
Dimitry Andric
e1bb2a8264 Bump __FreeBSD_version, and set tentative merge date. 2017-03-01 21:58:26 +00:00
Dimitry Andric
6ae9acde63 Merge ^/head r313896 through r314128. 2017-02-23 07:45:58 +00:00
Andriy Gapon
e9a0a054dd add UPDATING entry for r314048, re-work of .zfs code 2017-02-21 17:54:38 +00:00
Dimitry Andric
a3906ca572 Merge ^/head r313644 through r313895. 2017-02-17 20:19:38 +00:00
Warner Losh
18f447ed56 Note EISA and MCA bus removal 2017-02-17 06:22:00 +00:00
Dimitry Andric
14f850f3df Merge ^/head r312720 through r312893. 2017-01-27 20:01:46 +00:00
Ed Maste
f52e4bdfd7 Rename LLD_AS_LD to LLD_IS_LD, for consistency with CLANG_IS_CC
Reported by:	Dan McGregor <dan.mcgregor usask.ca>
2017-01-27 01:59:12 +00:00
Dimitry Andric
d370fd1cd8 Merge ^/head r311940 through r312200. 2017-01-14 22:20:12 +00:00
Sean Bruno
062a4b8c68 Deprecate kernel configuration option EM_MULTIQUEUE now that the em(4)
driver conforms to iflib.
2017-01-12 14:38:18 +00:00
Dimitry Andric
8a6fe8ce60 Merge ^/head r311812 through r311939. 2017-01-11 21:05:13 +00:00
Sean Bruno
f2d6ace4a6 Migrate e1000 to the IFLIB framework:
- em(4) igb(4) and lem(4)
- deprecate the igb device from kernel configurations
- create a symbolic link in /boot/kernel from if_em.ko to if_igb.ko

Devices tested:
- 82574L
- I218-LM
- 82546GB
- 82579LM
- I350
- I217

Please report problems to freebsd-net@freebsd.org

Partial review from jhb and suggestions on how to *not* brick folks who
originally would have lost their igbX device.

Submitted by:	mmacy@nextbsd.org
MFC after:	2 weeks
Relnotes:	yes
Sponsored by:	Limelight Networks and Dell EMC Isilon
Differential Revision:	https://reviews.freebsd.org/D8299
2017-01-10 03:23:22 +00:00
Dimitry Andric
617b5f75ef Add preliminary ObsoleteFiles and UPDATING entries. 2017-01-04 21:58:33 +00:00
Dimitry Andric
4644fe913f Put a tentative import date in ObsoleteFiles.inc and UPDATING. 2016-12-17 18:35:17 +00:00
Dimitry Andric
45bd65d638 Add UPDATING entry and update ObsoleteFiles.inc. 2016-11-26 01:17:03 +00:00
Dimitry Andric
7736f1a963 Add UPDATING entry for clang/llvm 3.9.0 import. 2016-11-24 22:18:55 +00:00
Justin Hibbits
4026b44790 Fix buildworld for powerpc.
vmpage requires struct pmap to exist and contain a pm_stats field.  As of
r308817, either AIM or BOOKE is required to be set in order to get their
respective pmap structs.  Rather than expose them both, or try to unify them
unnecessarily, add a third option which contains only a pm_stats field, and
change the two existing pmap structures to place the common fields at the
beginning of the struct.  This actually fixes the stats collection by libkvm on
AIM hardware, because before it was accessing a possibly different offset, which
would cause it to read garbage.

Bump __FreeBSD_version to denote this ABI change, so that ports which depend on
libkvm can be rebuilt.
2016-11-20 06:10:12 +00:00
Bryan Drewery
fb9b2ab190 Fix grammar nit 2016-11-17 00:21:55 +00:00
Andriy Gapon
448897d366 add iic interface to ig4 driver, move isl and cyapa to iicbus
Summary:
The hardware does not expose a classic SMBus interface.
Instead it has a lower level interface that can express a far richer
I2C protocol than what smbus offers.  However, the interface does not
provide a way to explicitly generate the I2C stop and start conditions.
It's only possible to request that the stop condition is generated
after transferring the next byte in either direction.  So, at least
one data byte must always be transferred.
Thus, some I2C sequences are impossible to generate, e.g., an equivalent
of smbus quick command (<start>-<slave addr>-<r/w bit>-<stop>).

At the same time isl(4) and cyapa(4) are moved to iicbus and now they use
iicbus_transfer for communication.  Previously they used smbus_trans()
interface that is not defined by the SMBus protocol and was implemented
only by ig4(4).  In fact, that interface was impossible to implement
for the typical SMBus controllers like intpm(4) or ichsmb(4) where
a type of the SMBus command must be programmed.

The plan is to remove smbus_trans() and all its uses.
As an aside, the smbus_trans() method deviates from the standard,
but perhaps backwards, FreeBSD convention of using 8-bit slave
addresses (shifted by 1 bit to the left).  The method expects
7-bit addresses.

There is a user facing consequence of this change.
A user must now provide device hints for isl and cyapa that specify an iicbus to use
and a slave address on it.
On Chromebook hardware where isl and cyapa devices are commonly found
it is also possible to use a new chromebook_platform(4) driver that
automatically configures isl and cyapa devices.  There is no need to
provide the device hints in that case,

Right now smbus(4) driver tries to discover all slaves on the bus.
That is very dangerous.  Fortunately, the probing code uses smbus_trans()
to do its job, so it is really enabled for ig4 only.
The plan is to remove that auto-probing code and smbus_trans().

Tested by:	grembo, Matthias Apitz <guru@unixarea.de> (w/o
		chromebook_platform)
Discussed with:	grembo, imp
Reviewed by:	wblock (docs)
MFC after:	1 month
Relnotes:	yes
Differential Revision: https://reviews.freebsd.org/D8172
2016-10-30 12:15:33 +00:00
Warner Losh
9013696194 Tweak the UPDATING message a bit about the upgrade path.
Add some automation into Makefile.inc1 to to enforce known good
upgrade from source paths.
2016-10-23 18:00:08 +00:00
Warner Losh
fca3dcdf4e After deeper software archaeology, reports that 10.3R was affected
turned out to be mistaken. Adjust the entry and fix a few typos.
2016-10-19 15:13:08 +00:00
Warner Losh
5ad05815a4 Document the unique requirements for upgrading more
prominently. Unlike in the past (dating back to the 4.x branch point),
you cannot upgrade from any point on the past couple of stable
branches to -current. Due to a bug in clang that existed before
r286035 in stable/9 or r286033 in stable/10, we cannot compile llvm
that's in 11.x or -current. Unfortunately, these revisions are after
9.3R and 10.3R on their respective branches. stable/11 and 11.0R are
not affected.

This also affects the upgrade path to 11 (including 11.0R) from
stable/9 and stable/10 (which would otherwise work, were it not for
this bug).

We also need to amend the 11.0R release notes.

MFC After: 3 days
2016-10-19 13:45:51 +00:00
Andriy Voskoboinyk
2616dd0b80 Fix dates + add an UPDATING entry. 2016-10-17 21:35:13 +00:00
Baptiste Daroussin
31b54b30fe Improve wording
Submitted by:	lidl
2016-10-15 15:55:04 +00:00
Baptiste Daroussin
963d6c18f4 Fix typo
Reported by:	"N.J. Mann" <njm@njm.me.uk>
2016-10-15 12:32:59 +00:00
Baptiste Daroussin
a0135a1e35 Remove GNU rcs from base.
GNU rcs is still available as a package:
- rcs: Latest GPLv3 GNU rcs version.
- rcs57: Copy of the latest version of GNU rcs (GPLv2) from base.

Relnotes:	yes
2016-10-15 12:07:37 +00:00
Jonathan T. Looney
bd79708dbf In the TCP stack, the hhook(9) framework provides hooks for kernel modules
to add actions that run when a TCP frame is sent or received on a TCP
session in the ESTABLISHED state. In the base tree, this functionality is
only used for the h_ertt module, which is used by the cc_cdg, cc_chd, cc_hd,
and cc_vegas congestion control modules.

Presently, we incur overhead to check for hooks each time a TCP frame is
sent or received on an ESTABLISHED TCP session.

This change adds a new compile-time option (TCP_HHOOK) to determine whether
to include the hhook(9) framework for TCP. To retain backwards
compatibility, I added the TCP_HHOOK option to every configuration file that
already defined "options INET". (Therefore, this patch introduces no
functional change. In order to see a functional difference, you need to
compile a custom kernel without the TCP_HHOOK option.) This change will
allow users to easily exclude this functionality from their kernel, should
they wish to do so.

Note that any users who use a custom kernel configuration and use one of the
congestion control modules listed above will need to add the TCP_HHOOK
option to their kernel configuration.

Reviewed by:	rrs, lstewart, hiren (previous version), sjg (makefiles only)
Sponsored by:	Netflix
Differential Revision:	https://reviews.freebsd.org/D8185
2016-10-12 02:16:42 +00:00
Ed Maste
9ce3c6b09a Retire WITHOUT_ELFCOPY_AS_OBJCOPY option
In FreeBSD 11 ELF Tool Chain's elfcopy is installed as objcopy by
default, with the option to switch back to GNU objcopy by setting
WITHOUT_ELFCOPY_AS_OBJCOPY in make.conf.

We plan to remove the outdated in-tree binutils in FreeBSD 12, so
remove the temporary transition aid.

Reviewed by:	brooks, imp
Relnotes:	Yes
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D7337
2016-10-03 17:49:26 +00:00
Marcel Moolenaar
bba95d2d7e Relocatable object files are renamed from *.So to *.pico
Reminder by:	imp@
2016-09-25 16:39:18 +00:00
Baptiste Daroussin
452e188911 Sperify that users can find rcs and rcs57 in ports
Reported by:	cy
2016-09-18 18:27:28 +00:00
Baptiste Daroussin
f902d06ce3 Use the proper word
Reported by:	danfe
2016-09-18 15:55:57 +00:00
Baptiste Daroussin
0c52d77571 Apparently we are supposed to use 2 spaces after full stop
Reported by:	danfe
2016-09-18 15:51:34 +00:00
Baptiste Daroussin
0adf2bc849 Disable GNU rcs by default
All remaining tools using rcs has been switched to directly use diff3(1):
- etcupdate(8)
- freebsd-update(8)

Note that the ident(1) tool is been already replaced long ago with a BSD
licensed version, as such it remains installed.

GNU rcs is still available from ports:
- rcs: newer GPLv3 version
- rcs57: the latest version from base (GPLv2)
2016-09-18 15:01:11 +00:00