independent layer of the virtual memory system. Update some of the nearby
comments to eliminate redundancy and improve clarity.
In vm/vm_reserv.c, do not use hyphens after adverbs ending in -ly per
The Chicago Manual of Style.
Update the comment in vm/vm_page.h defining the four types of page queues to
reflect the elimination of PG_CACHED pages and the introduction of the
laundry queue.
Reviewed by: kib, markj
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D8752
Some clocks on SoC have a diff between the value written in the register
and the real divider.
Add a table that where we can lookup the real value of the divider.
Reviewed by: mmel (earlier revision)
Differential Revision: https://reviews.freebsd.org/D8728
This allows blind increment of relevant counters which under contention
is cheaper than inc-not-zero loops at least on amd64.
Use it in some of the places which are guaranteed to see already active
vnodes.
Reviewed by: kib (previous version)
r309616 changed the definition of GICD_ITARGETSR(n) to take the irq
id as argument, but the usage of the macro in gic_cpu_mask() was not
updated to reflect this. This causes the cpu mask to be computed
incorrectly.
Update the GICD_ITARGETSR() call to fix this, this fixes a hang seen
while booting freebsd on qemu-system-aarch64 with SMP enabled.
ARM GIC specification in device trees use 3 cells, so the current
limit of 2 causes the last cell to be dropped. This in turn can
cause the interrupt polarity and trigger settings to be incorrect.
Increase the limit to 4 which should handle all reasonable cases.
This fixes issues seen in QEMU when registering PCI interrupts.
Add rcvif local variable to keep inbound interface pointer. Count
ifs6_in_discard errors in all "goto bad" cases. Now it will count
errors even if mbuf was freed. Modify all places where m->m_pkthdr.rcvif
is used to use local rcvif variable.
Obtained from: Yandex LLC
MFC after: 1 month
the reaper.
The traditional reaper init(8) is aware of zombies silently reparented
to it after the parents exit, it loops around waitpid(2) to collect
them. For other reapers, the silent reparenting is surprising and
collecting zombies requires a thread blocking in waitpid(2) just for
that purpose. It seems that sending second SIGCHLD is a better
workaround than forcing all reapers to obey the setup.
Reported by: Michael Zuo <muh.muhten@gmail.com>, jilles
PR: 213928
Reviewed by: jilles (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
for IPv6.
It gets performance benefits from reduced number of checks. It doesn't
copy mbuf to be able send ICMPv6 error message, because it keeps mbuf
unchanged until the moment, when the route decision has been made.
It doesn't do IPsec checks, and when some IPsec security policies present,
ip6_input() uses normal slow path.
Reviewed by: bz, gnn
Obtained from: Yandex LLC
MFC after: 1 month
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D8527
in6p_options to check that. That is incorrect as we carry ip options in
in6p_outputopts. Also, just checking for in6p_outputopts being NULL won't
suffice as we combine ip options and ip header fields both in that one field.
The commit fixes this by using ip6_optlen() which correctly calculates length
of only ip options for IPv6.
Reviewed by: ae, bz
MFC after: 3 weeks
Sponsored by: Limelight Networks
At least on FreeBSD there are no legal way to access media or get its
size without opening device/provider first. Postponing this caching
allows to skip several disk seeks per ZVOL/snapshot during import.
For HDD pool with 1 ZVOL in dev mode with 1000 snapshots this reduces
pool import time from 40 to 10 seconds.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
truncation, immediately queue the page for asynchronous laundering rather
than making the page pass through inactive queue first.
Reviewed by: kib, markj
This fixes a bug where the wrong ppid was reported, if
* I-DATA was used on the first fragement was not received first
* DATA was used and different ppids where used.
Thanks to Julian Cordes for making me aware of the issue.
MFC after: 1 week
- Do not ignore initialization errors; call ieee80211_stop()
when initialization failed.
- Use usb_pause_mtx() instead of DELAY() while waiting for firmware
loading; this fixes system freeze during firmware startup.
- Do not execute rsu_stop() when device is powered off; fixes
'unknown board type (rfconfig=0xff)' error when the device is
reattached.
Tested with Asus USB-N10.
- Replace all remaining DPRINTF(N)'s with RSU_DPRINTF.
- Add new RSU_DEBUG_USB flag to track error codes returned by
usbd_do_request_flags().
- Improve few messages.
- Add partial promiscuous mode support (no management frames;
they cannot be received by the firmware and net80211 at the same time).
- Add monitor mode support (all frames).
Tested with Asus, USB-N10.
For horizontal (T-axis) wheel reporting which is not supported by
sysmouse protocol kern.evdev.sysmouse_t_axis sysctl is introduced.
It can take following values:
0 - no T-axis events (default)
1 - T-axis events are originated in ums(4) driver.
2 - T-axis events are originated in psm(4) driver.
Submitted by: Vladimir Kondratiev <wulf@cicgroup.ru>
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D8597
BUS_DMASYNC_PREREAD is required when setting up RX buffer, otherwise
data provided by card can be overwritten by data evicted from cache
Also use proper tag when setting up RX descriptor
Reviewed by: adrian, avos, ivadasz
Differential Revision: https://reviews.freebsd.org/D8717
This is required for USB Rx aggregation
(and fixes 'could not allocate RX mbuf' / few other failures).
While here, reduce the number of Rx buffers from 100 to 1 -
the driver never uses more than one Rx buffer.
Tested with Asus USB-N10.
Changes include modifications in kernel crash dump routines, dumpon(8) and
savecore(8). A new tool called decryptcore(8) was added.
A new DIOCSKERNELDUMP I/O control was added to send a kernel crash dump
configuration in the diocskerneldump_arg structure to the kernel.
The old DIOCSKERNELDUMP I/O control was renamed to DIOCSKERNELDUMP_FREEBSD11 for
backward ABI compatibility.
dumpon(8) generates an one-time random symmetric key and encrypts it using
an RSA public key in capability mode. Currently only AES-256-CBC is supported
but EKCD was designed to implement support for other algorithms in the future.
The public key is chosen using the -k flag. The dumpon rc(8) script can do this
automatically during startup using the dumppubkey rc.conf(5) variable. Once the
keys are calculated dumpon sends them to the kernel via DIOCSKERNELDUMP I/O
control.
When the kernel receives the DIOCSKERNELDUMP I/O control it generates a random
IV and sets up the key schedule for the specified algorithm. Each time the
kernel tries to write a crash dump to the dump device, the IV is replaced by
a SHA-256 hash of the previous value. This is intended to make a possible
differential cryptanalysis harder since it is possible to write multiple crash
dumps without reboot by repeating the following commands:
# sysctl debug.kdb.enter=1
db> call doadump(0)
db> continue
# savecore
A kernel dump key consists of an algorithm identifier, an IV and an encrypted
symmetric key. The kernel dump key size is included in a kernel dump header.
The size is an unsigned 32-bit integer and it is aligned to a block size.
The header structure has 512 bytes to match the block size so it was required to
make a panic string 4 bytes shorter to add a new field to the header structure.
If the kernel dump key size in the header is nonzero it is assumed that the
kernel dump key is placed after the first header on the dump device and the core
dump is encrypted.
Separate functions were implemented to write the kernel dump header and the
kernel dump key as they need to be unencrypted. The dump_write function encrypts
data if the kernel was compiled with the EKCD option. Encrypted kernel textdumps
are not supported due to the way they are constructed which makes it impossible
to use the CBC mode for encryption. It should be also noted that textdumps don't
contain sensitive data by design as a user decides what information should be
dumped.
savecore(8) writes the kernel dump key to a key.# file if its size in the header
is nonzero. # is the number of the current core dump.
decryptcore(8) decrypts the core dump using a private RSA key and the kernel
dump key. This is performed by a child process in capability mode.
If the decryption was not successful the parent process removes a partially
decrypted core dump.
Description on how to encrypt crash dumps was added to the decryptcore(8),
dumpon(8), rc.conf(5) and savecore(8) manual pages.
EKCD was tested on amd64 using bhyve and i386, mipsel and sparc64 using QEMU.
The feature still has to be tested on arm and arm64 as it wasn't possible to run
FreeBSD due to the problems with QEMU emulation and lack of hardware.
Designed by: def, pjd
Reviewed by: cem, oshogbo, pjd
Partial review: delphij, emaste, jhb, kib
Approved by: pjd (mentor)
Differential Revision: https://reviews.freebsd.org/D4712
don't need the extra debug facilities. Copied from the amd64
configuration of the same name.
Submitted by: Nikolai Lifanov
Reviewed by: emaste
MFC after: 2 weeks
Instead of taking an extra reference to deal with pfsync_q_ins()
and pfsync_q_del() taken and dropping a reference (resp,) make
it optional of those functions to take or drop a reference by
passing an extra argument.
Submitted by: glebius@
These functions may be called in DTrace probe context, so they cannot be
safely traced. Moreover, they are currently only used by DTrace, so their
corresponding FBT probes are not particularly useful.
MFC after: 2 weeks
module loading is successful, but attempts to use it will not be
successful. This is similar to what we do (did?) with ACPI on non-ACPI
systems. We succeed if we can't find the necessary information to hook
into EFI, but still fail if we're unable to allocate resources if we
do find EFI.
Not Objected to by: kib@
MFC Afer: 3 days
If we load a binary that is designed to be a library, it produces
relocatable code via assembler directives in the assembly itself
(rather than compiler options). This emits R_X86_64_PLT32 relocations,
which are not handled by the kernel linker.
Submitted by: gallatin
Reviewed by: kib
