r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.
Mark all obvious cases as MPSAFE. All entries that haven't been marked
as MPSAFE before are by default marked as NEEDGIANT
Approved by: kib (mentor, blanket)
Commented by: kib, gallatin, melifaro
Differential Revision: https://reviews.freebsd.org/D23718
Now enabling ipfw(4) with sysctls controls only linkage of hooks to default
heads. When module is loaded fetch sysctls as tunables, to make it possible
to boot with ipfw(4) in kernel, but not linked to any pfil(9) hooks.
Add second IPv6 prefix to generic config structure and rename another
fields to conform to RFC6877. Now it contains two prefixes and length:
PLAT is provider-side translator that translates N:1 global IPv6 addresses
to global IPv4 addresses. CLAT is customer-side translator (XLAT) that
algorithmically translates 1:1 IPv4 addresses to global IPv6 addresses.
Use PLAT prefix in stateless (nat64stl) and stateful (nat64lsn)
translators.
Modify nat64_extract_ip4() and nat64_embed_ip4() functions to accept
prefix length and use plat_plen to specify prefix length.
Retire net.inet.ip.fw.nat64_allow_private sysctl variable.
Add NAT64_ALLOW_PRIVATE flag and use "allow_private" config option to
configure this ability separately for each NAT64 instance.
Obtained from: Yandex LLC
MFC after: 1 month
Sponsored by: Yandex LLC
With new pfil(9) KPI it is possible to pass a void pointer with length
instead of mbuf pointer to a packet filter. Until this commit no filters
supported that, so pfil run through a shim function pfil_fake_mbuf().
Now the ipfw(4) hook named "default-link", that is instantiated when
net.link.ether.ipfw sysctl is on, supports processing pointer/length
packets natively.
- ip_fw_args now has union for either mbuf or void *, and if flags have
non-zero length, then we use the void *.
- through ipfw_chk() we handle mem/mbuf cases differently.
- ether_header goes away from args. It is ipfw_chk() responsibility
to do parsing of Ethernet header.
- ipfw_log() now uses different bpf APIs to log packets.
Although ipfw_chk() is now capable to process pointer/length packets,
this commit adds support for the link level hook only, see
ipfw_check_frame(). Potentially the IP processing hook ipfw_check_packet()
can be improved too, but that requires more changes since the hook
supports more complex actions: NAT, divert, etc.
Reviewed by: ae
Differential Revision: https://reviews.freebsd.org/D19357
IPFW_ARGS_OUT are utilized. They are intented to substitute the "dir"
parameter that is often passes together with args.
- Rename ip_fw_args.oif to ifp and now it is set to either input or
output interface, depending on IPFW_ARGS_IN/OUT bit set.
It will be used by upcoming NAT64 changes. We use separate code
to avoid propogating EACCES error code to user level applications
when NAT64 consumes a packet.
Obtained from: Yandex LLC
MFC after: 1 week
Sponsored by: Yandex LLC
The KPI have been reviewed and cleansed of features that were planned
back 20 years ago and never implemented. The pfil(9) internals have
been made opaque to protocols with only returned types and function
declarations exposed. The KPI is made more strict, but at the same time
more extensible, as kernel uses same command structures that userland
ioctl uses.
In nutshell [KA]PI is about declaring filtering points, declaring
filters and linking and unlinking them together.
New [KA]PI makes it possible to reconfigure pfil(9) configuration:
change order of hooks, rehook filter from one filtering point to a
different one, disconnect a hook on output leaving it on input only,
prepend/append a filter to existing list of filters.
Now it possible for a single packet filter to provide multiple rulesets
that may be linked to different points. Think of per-interface ACLs in
Cisco or Juniper. None of existing packet filters yet support that,
however limited usage is already possible, e.g. default ruleset can
be moved to single interface, as soon as interface would pride their
filtering points.
Another future feature is possiblity to create pfil heads, that provide
not an mbuf pointer but just a memory pointer with length. That would
allow filtering at very early stages of a packet lifecycle, e.g. when
packet has just been received by a NIC and no mbuf was yet allocated.
Differential Revision: https://reviews.freebsd.org/D18951
And refactor the code to avoid unneeded initialization to reduce overhead
of per-packet processing.
ipfw(4) can be invoked by pfil(9) framework for each packet several times.
Each call uses on-stack variable of type struct ip_fw_args to keep the
state of ipfw(4) processing. Currently this variable has 240 bytes size
on amd64. Each time ipfw(4) does bzero() on it, and then it initializes
some fields.
glebius@ has reported that they at Netflix discovered, that initialization
of this variable produces significant overhead on packet processing.
After patching I managed to increase performance of packet processing on
simple routing with ipfw(4) firewalling to about 11% from 9.8Mpps up to
11Mpps (Xeon E5-2660 v4@ + Mellanox 100G card).
Introduced new field flags, it is used to keep track of what fields was
initialized. Some fields were moved into the anonymous union, to reduce
the size. They all are mutually exclusive. dummypar field was unused, and
therefore it is removed. The hopstore6 field type was changed from
sockaddr_in6 to a bit smaller struct ip_fw_nh6. And now the size of struct
ip_fw_args is 128 bytes.
ipfw_chk() was modified to properly handle ip_fw_args.flags instead of
rely on checking for NULL pointers.
Reviewed by: gallatin
Obtained from: Yandex LLC
MFC after: 1 month
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D18690
Kernel part of ipfw does not support and ignores rules other than
"pass", "deny" and dummynet-related for layer-2 (ethernet frames).
Others are processed as "pass".
Make it support ngtee/netgraph rules just like they are supported
for IP packets. For example, this allows us to mirror some frames
selectively to another interface for delivery to remote network analyzer
over RSPAN vlan. Assuming ng_ipfw(4) netgraph node has a hook named "900"
attached to "lower" hook of vlan900's ng_ether(4) node, that would be
as simple as:
ipfw add ngtee 900 ip from any to 8.8.8.8 layer2 out xmit igb0
PR: 213452
MFC after: 1 month
Tested-by: Fyodor Ustinov <ufm@ufm.su>
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
No functional change intended.
for dummynet, use the correct argument for that, remove the false coment
about the presence of struct ifnet.
Fixes the input match of dummynet l2 rules.
Obtained from: pfSense
MFC after: 2 weeks
Sponsored by: Rubicon Communications, LLC (Netgate)
to obtain IPv4 next hop address in tablearg case.
Add `fwd tablearg' support for IPv6. ipfw(8) uses INADDR_ANY as next hop
address in O_FORWARD_IP opcode for specifying tablearg case. For IPv6 we
still use this opcode, but when packet identified as IPv6 packet, we
obtain next hop address from dedicated field nh6 in struct table_value.
Replace hopstore field in struct ip_fw_args with anonymous union and add
hopstore6 field. Use this field to copy tablearg value for IPv6.
Replace spare1 field in struct table_value with zoneid. Use it to keep
scope zone id for link-local IPv6 addresses. Since spare1 was used
internally, replace spare0 array with two variables spare0 and spare1.
Use getaddrinfo(3)/getnameinfo(3) functions for parsing and formatting
IPv6 addresses in table_value. Use zoneid field in struct table_value
to store sin6_scope_id value.
Since the kernel still uses embedded scope zone id to represent
link-local addresses, convert next_hop6 address into this form before
return from pfil processing. This also fixes in6_localip() check
for link-local addresses.
Differential Revision: https://reviews.freebsd.org/D2015
Obtained from: Yandex LLC
Sponsored by: Yandex LLC
so they can be used in the userspace version of ipfw/dummynet
(normally using netmap for the I/O path).
This is the first of a few commits to ease compiling the
ipfw kernel code in userspace.
Instead, add protocol specific mbuf flags M_IP_NEXTHOP and
M_IP6_NEXTHOP. Use them to indicate that the mbuf's chain
contains the PACKET_TAG_IPFORWARD tag. And do a tag lookup
only when this flag is set.
Suggested by: andre
on the related functionality in the runtime via the sysctl variable
net.pfil.forward. It is turned off by default.
Sponsored by: Yandex LLC
Discussed with: net@
MFC after: 2 weeks
in network byte order. Any host byte order processing is
done in local variables and host byte order values are
never[1] written to a packet.
After this change a packet processed by the stack isn't
modified at all[2] except for TTL.
After this change a network stack hacker doesn't need to
scratch his head trying to figure out what is the byte order
at the given place in the stack.
[1] One exception still remains. The raw sockets convert host
byte order before pass a packet to an application. Probably
this would remain for ages for compatibility.
[2] The ip_input() still subtructs header len from ip->ip_len,
but this is planned to be fixed soon.
Reviewed by: luigi, Maxim Dounin <mdounin mdounin.ru>
Tested by: ray, Olivier Cochard-Labbe <olivier cochard.me>
- All packets in NETISR_IP queue are in net byte order.
- ip_input() is entered in net byte order and converts packet
to host byte order right _after_ processing pfil(9) hooks.
- ip_output() is entered in host byte order and converts packet
to net byte order right _before_ processing pfil(9) hooks.
- ip_fragment() accepts and emits packet in net byte order.
- ip_forward(), ip_mloopback() use host byte order (untouched actually).
- ip_fastforward() no longer modifies packet at all (except ip_ttl).
- Swapping of byte order there and back removed from the following modules:
pf(4), ipfw(4), enc(4), if_bridge(4).
- Swapping of byte order added to ipfilter(4), based on __FreeBSD_version
- __FreeBSD_version bumped.
- pfil(9) manual page updated.
Reviewed by: ray, luigi, eri, melifaro
Tested by: glebius (LE), ray (BE)
reside, and move there ipfw(4) and pf(4).
o Move most modified parts of pf out of contrib.
Actual movements:
sys/contrib/pf/net/*.c -> sys/netpfil/pf/
sys/contrib/pf/net/*.h -> sys/net/
contrib/pf/pfctl/*.c -> sbin/pfctl
contrib/pf/pfctl/*.h -> sbin/pfctl
contrib/pf/pfctl/pfctl.8 -> sbin/pfctl
contrib/pf/pfctl/*.4 -> share/man/man4
contrib/pf/pfctl/*.5 -> share/man/man5
sys/netinet/ipfw -> sys/netpfil/ipfw
The arguable movement is pf/net/*.h -> sys/net. There are
future plans to refactor pf includes, so I decided not to
break things twice.
Not modified bits of pf left in contrib: authpf, ftp-proxy,
tftp-proxy, pflogd.
The ipfw(4) movement is planned to be merged to stable/9,
to make head and stable match.
Discussed with: bz, luigi