Commit Graph

111 Commits

Author SHA1 Message Date
SUZUKI Shinsuke
8343821b87 fixed a bug that local IPv6 traffic (to an address configured on an
interface other than lo0) does not show up properly on any bpf.

Reported by: mlaier
Reviewed by: gnn, csjp
MFC after: 1 week
2006-09-22 01:31:22 +00:00
Sam Leffler
6b7330e2d4 Revise network interface cloning to take an optional opaque
parameter that can specify configuration parameters:
o rev cloner api's to add optional parameter block
o add SIOCCREATE2 that accepts parameter data
o rev vlan support to use new api (maintain old code)

Reviewed by:	arch@
2006-07-09 06:04:01 +00:00
Christian S.J. Peron
16d878cc99 Fix the following bpf(4) race condition which can result in a panic:
(1) bpf peer attaches to interface netif0
	(2) Packet is received by netif0
	(3) ifp->if_bpf pointer is checked and handed off to bpf
	(4) bpf peer detaches from netif0 resulting in ifp->if_bpf being
	    initialized to NULL.
	(5) ifp->if_bpf is dereferenced by bpf machinery
	(6) Kaboom

This race condition likely explains the various different kernel panics
reported around sending SIGINT to tcpdump or dhclient processes. But really
this race can result in kernel panics anywhere you have frequent bpf attach
and detach operations with high packet per second load.

Summary of changes:

- Remove the bpf interface's "driverp" member
- When we attach bpf interfaces, we now set the ifp->if_bpf member to the
  bpf interface structure. Once this is done, ifp->if_bpf should never be
  NULL. [1]
- Introduce bpf_peers_present function, an inline operation which will do
  a lockless read bpf peer list associated with the interface. It should
  be noted that the bpf code will pickup the bpf_interface lock before adding
  or removing bpf peers. This should serialize the access to the bpf descriptor
  list, removing the race.
- Expose the bpf_if structure in bpf.h so that the bpf_peers_present function
  can use it. This also removes the struct bpf_if; hack that was there.
- Adjust all consumers of the raw if_bpf structure to use bpf_peers_present

Now what happens is:

	(1) Packet is received by netif0
	(2) Check to see if bpf descriptor list is empty
	(3) Pickup the bpf interface lock
	(4) Hand packet off to process

From the attach/detach side:

	(1) Pickup the bpf interface lock
	(2) Add/remove from bpf descriptor list

Now that we are storing the bpf interface structure with the ifnet, there is
is no need to walk the bpf interface list to locate the correct bpf interface.
We now simply look up the interface, and initialize the pointer. This has a
nice side effect of changing a bpf interface attach operation from O(N) (where
N is the number of bpf interfaces), to O(1).

[1] From now on, we can no longer check ifp->if_bpf to tell us whether or
    not we have any bpf peers that might be interested in receiving packets.

In collaboration with:	sam@
MFC after:	1 month
2006-06-02 19:59:33 +00:00
John Baldwin
73dbd3da73 Remove various bits of conditional Alpha code and fixup a few comments. 2006-05-12 05:04:46 +00:00
Robert Watson
13f4c340ae Propagate rename of IFF_OACTIVE and IFF_RUNNING to IFF_DRV_OACTIVE and
IFF_DRV_RUNNING, as well as the move from ifnet.if_flags to
ifnet.if_drv_flags.  Device drivers are now responsible for
synchronizing access to these flags, as they are in if_drv_flags.  This
helps prevent races between the network stack and device driver in
maintaining the interface flags field.

Many __FreeBSD__ and __FreeBSD_version checks maintained and continued;
some less so.

Reviewed by:	pjd, bz
MFC after:	7 days
2005-08-09 10:20:02 +00:00
David Malone
01399f34a5 Fix some long standing bugs in writing to the BPF device attached to
a DLT_NULL interface. In particular:

        1) Consistently use type u_int32_t for the header of a
           DLT_NULL device - it continues to represent the address
           family as always.
        2) In the DLT_NULL case get bpf_movein to store the u_int32_t
           in a sockaddr rather than in the mbuf, to be consistent
           with all the DLT types.
        3) Consequently fix a bug in bpf_movein/bpfwrite which
           only permitted packets up to 4 bytes less than the MTU
           to be written.
        4) Fix all DLT_NULL devices to have the code required to
           allow writing to their bpf devices.
        5) Move the code to allow writing to if_lo from if_simloop
           to looutput, because it only applies to DLT_NULL devices
           but was being applied to other devices that use if_simloop
           possibly incorrectly.

PR:		82157
Submitted by:	Matthew Luckie <mjl@luckie.org.nz>
Approved by:	re (scottl)
2005-06-26 18:11:11 +00:00
Brooks Davis
fc74a9f93a Stop embedding struct ifnet at the top of driver softcs. Instead the
struct ifnet or the layer 2 common structure it was embedded in have
been replaced with a struct ifnet pointer to be filled by a call to the
new function, if_alloc(). The layer 2 common structure is also allocated
via if_alloc() based on the interface type. It is hung off the new
struct ifnet member, if_l2com.

This change removes the size of these structures from the kernel ABI and
will allow us to better manage them as interfaces come and go.

Other changes of note:
 - Struct arpcom is no longer referenced in normal interface code.
   Instead the Ethernet address is accessed via the IFP2ENADDR() macro.
   To enforce this ac_enaddr has been renamed to _ac_enaddr.
 - The second argument to ether_ifattach is now always the mac address
   from driver private storage rather than sometimes being ac_enaddr.

Reviewed by:	sobomax, sam
2005-06-10 16:49:24 +00:00
Sam Leffler
89bc9a3171 the rt parameter to ifa_rtrequest callbacks should always be non-null;
eliminate grauitous ptr checks that follow ptr deref's

Noticed by:	Coverity Prevent analysis tool
2005-02-24 01:34:01 +00:00
Warner Losh
c398230b64 /* -> /*- for license, minor formatting changes 2005-01-07 01:45:51 +00:00
Andre Oppermann
3161f583ca Apply error and success logic consistently to the function netisr_queue() and
its users.

netisr_queue() now returns (0) on success and ERRNO on failure.  At the
moment ENXIO (netisr queue not functional) and ENOBUFS (netisr queue full)
are supported.

Previously it would return (1) on success but the return value of IF_HANDOFF()
was interpreted wrongly and (0) was actually returned on success.  Due to this
schednetisr() was never called to kick the scheduling of the isr.  However this
was masked by other normal packets coming through netisr_dispatch() causing the
dequeueing of waiting packets.

PR:		kern/70988
Found by:	MOROHOSHI Akihiko <moro@remus.dti.ne.jp>
MFC after:	3 days
2004-08-27 18:33:08 +00:00
Alexander Kabaev
445e045b0d Avoid casts as lvalues. 2004-07-28 06:59:55 +00:00
Poul-Henning Kamp
3e019deaed Do a pass over all modules in the kernel and make them return EOPNOTSUPP
for unknown events.

A number of modules return EINVAL in this instance, and I have left
those alone for now and instead taught MOD_QUIESCE to accept this
as "didn't do anything".
2004-07-15 08:26:07 +00:00
Pawel Jakub Dawidek
0a44517d3a Those are unneeded too. 2004-06-27 09:06:10 +00:00
Pawel Jakub Dawidek
46e3b1cbe7 Add two missing includes and remove two uneeded.
This is quite serious fix, because even with MAC framework compiled in,
MAC entry points in those two files were simply ignored.
2004-06-27 09:03:22 +00:00
Brooks Davis
f889d2ef8d Major overhaul of pseudo-interface cloning. Highlights include:
- Split the code out into if_clone.[ch].
 - Locked struct if_clone. [1]
 - Add a per-cloner match function rather then simply matching names of
   the form <name><unit> and <name>.
 - Use the match function to allow creation of <interface>.<tag>
   vlan interfaces.  The old way is preserved unchanged!
 - Also the match function to allow creation of stf(4) interfaces named
   stf0, stf, or 6to4.  This is the only major user visible change in
   that "ifconfig stf" creates the interface stf rather then stf0 and
   does not print "stf0" to stdout.
 - Allow destroy functions to fail so they can refuse to delete
   interfaces.  Currently, we forbid the deletion of interfaces which
   were created in the init function, particularly lo0, pflog0, and
   pfsync0.  In the case of lo0 this was a panic implementation so it
   does not count as a user visiable change. :-)
 - Since most interfaces do not need the new functionality, an family of
   wrapper functions, ifc_simple_*(), were created to wrap old style
   cloner functions.
 - The IF_CLONE_INITIALIZER macro is replaced with a new incompatible
   IFC_CLONE_INITIALIZER and ifc_simple consumers use IFC_SIMPLE_DECLARE
   instead.

Submitted by:   Maurycy Pawlowski-Wieronski <maurycy at fouk.org> [1]
Reviewed by:    andre, mlaier
Discussed on:	net
2004-06-22 20:13:25 +00:00
Brooks Davis
bb2bfb4fa9 Staticize <if>_clone_{create,destroy} functions.
Reviewed by:	mlaier
2004-04-14 00:57:49 +00:00
Warner Losh
f36cfd49ad Remove advertising clause from University of California Regent's
license, per letter dated July 22, 1999 and email from Peter Wemm,
Alan Cox and Robert Watson.

Approved by: core, peter, alc, rwatson
2004-04-07 20:46:16 +00:00
Robert Watson
f25ee08633 Introduce lo_mtx to protect the global loopback softc list. I'm not
really sure why we have a softc list for if_loop, given that it
can't be unloaded, but that's an issue to revisit in the future as
corrupting the softc list would still cause panics.

Reviewed by:	benno
2004-03-09 17:27:48 +00:00
Sam Leffler
437ffe1823 o eliminate widespread on-stack mbuf use for bpf by introducing
a new bpf_mtap2 routine that does the right thing for an mbuf
  and a variable-length chunk of data that should be prepended.
o while we're sweeping the drivers, use u_int32_t uniformly when
  when prepending the address family (several places were assuming
  sizeof(int) was 4)
o return M_ASSERTVALID to BPF_MTAP* now that all stack-allocated
  mbufs have been eliminated; this may better be moved to the bpf
  routines

Reviewed by:	arch@ and several others
2003-12-28 03:56:00 +00:00
Andre Oppermann
97d8d152c2 Introduce tcp_hostcache and remove the tcp specific metrics from
the routing table.  Move all usage and references in the tcp stack
from the routing table metrics to the tcp hostcache.

It caches measured parameters of past tcp sessions to provide better
initial start values for following connections from or to the same
source or destination.  Depending on the network parameters to/from
the remote host this can lead to significant speedups for new tcp
connections after the first one because they inherit and shortcut
the learning curve.

tcp_hostcache is designed for multiple concurrent access in SMP
environments with high contention and is hash indexed by remote
ip address.

It removes significant locking requirements from the tcp stack with
regard to the routing table.

Reviewed by:	sam (mentor), bms
Reviewed by:	-net, -current, core@kame.net (IPv6 parts)
Approved by:	re (scottl)
2003-11-20 20:07:39 +00:00
Mike Silbersack
20880eabe9 Remove the m_defrag call from if_loop; testing with m_fragment
has shown that the IPv6 stack can clearly handle fragmented
mbuf chains without a problem.

MFC after:	1 week
2003-11-11 17:58:36 +00:00
Brooks Davis
9bf40ede4a Replace the if_name and if_unit members of struct ifnet with new members
if_xname, if_dname, and if_dunit. if_xname is the name of the interface
and if_dname/unit are the driver name and instance.

This change paves the way for interface renaming and enhanced pseudo
device creation and configuration symantics.

Approved By:	re (in principle)
Reviewed By:	njl, imp
Tested On:	i386, amd64, sparc64
Obtained From:	NetBSD (if_xname)
2003-10-31 18:32:15 +00:00
Sam Leffler
8dbc9c8bf4 Always queue looped back packets (rather than potentially using
direct dispatch) to avoid extensive kernel stack usage and to
avoid directly re-entering the network stack.  The latter causes
locking problems when, for example, a complete TCP handshake`
happens w/o a context switch.
2003-10-29 18:37:47 +00:00
Sam Leffler
9c855a36c1 Introduce the notion of "persistent mbuf tags"; these are tags that stay
with an mbuf until it is reclaimed.  This is in contrast to tags that
vanish when an mbuf chain passes through an interface.  Persistent tags
are used, for example, by MAC labels.

Add an m_tag_delete_nonpersistent function to strip non-persistent tags
from mbufs and use it to strip such tags from packets as they pass through
the loopback interface and when turned around by icmp.  This fixes problems
with "tag leakage".

Pointed out by:	Jonathan Stone
Reviewed by:	Robert Watson
2003-10-29 05:40:07 +00:00
Alexander Kabaev
78ece5537d Delay if_lo module intialization until domain list has been
completely populated. This prevents a system crash on boot.
2003-10-27 04:16:32 +00:00
Sam Leffler
d1dd20be6e Locking for updates to routing table entries. Each rtentry gets a mutex
that covers updates to the contents.  Note this is separate from holding
a reference and/or locking the routing table itself.

Other/related changes:

o rtredirect loses the final parameter by which an rtentry reference
  may be returned; this was never used and added unwarranted complexity
  for locking.
o minor style cleanups to routing code (e.g. ansi-fy function decls)
o remove the logic to bump the refcnt on the parent of cloned routes,
  we assume the parent will remain as long as the clone; doing this avoids
  a circularity in locking during delete
o convert some timeouts to MPSAFE callouts

Notes:

1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level
   applications cannot/do-no know about mutex's.  Doing this requires
   that the mutex be the last element in the structure.  A better solution
   is to introduce an externalized version of struct rtentry but this is
   a major task because of the intertwining of rtentry and other data
   structures that are visible to user applications.
2. There are known LOR's that are expected to go away with forthcoming
   work to eliminate many held references.  If not these will be resolved
   prior to release.
3. ATM changes are untested.

Sponsored by:	FreeBSD Foundation
Obtained from:	BSD/OS (partly)
2003-10-04 03:44:50 +00:00
Mike Silbersack
7ab9842a99 Also ifdef the variable which becomes unused w/o INET6, fixing the build
after the previous commit.

Noticed by:	alc
2003-08-09 05:44:00 +00:00
Mike Silbersack
fe3e8c5167 #ifdef INET6 the if_loop packet defrag; since only the ipv6 stack (might)
require this to be done, there's no reason to waste time doing it if
ipv6 isn't compiled in.

MFC after:	1 week
2003-08-09 02:55:11 +00:00
Mike Silbersack
17d6531977 Replace a handrolled defrag function with m_defrag. The handrolled
function couldn't handle chains of > MCLBYTES, and it had a bug which
caused corruption and panics in certain low mbuf situations.

Additionally, change the failure case so that looutput returns ENOBUFS
rather than attempting to pass on non-defragmented mbuf chains.

Finally, remove the printf which would happen every time the low memory
situation occured.  It served no useful purpose other than to clue me
in as to what was causing the panic in question. :)

MFC after:	4 days
2003-05-28 02:04:33 +00:00
Robert Watson
225bff6f8b Move MAC label storage for mbufs into m_tags from the m_pkthdr structure,
returning some additional room in the first mbuf in a chain, and
avoiding feature-specific contents in the mbuf header.  To do this:

- Modify mbuf_to_label() to extract the tag, returning NULL if not
  found.

- Introduce mac_init_mbuf_tag() which does most of the work
  mac_init_mbuf() used to do, except on an m_tag rather than an
  mbuf.

- Scale back mac_init_mbuf() to perform m_tag allocation and invoke
  mac_init_mbuf_tag().

- Replace mac_destroy_mbuf() with mac_destroy_mbuf_tag(), since
  m_tag's are now GC'd deep in the m_tag/mbuf code rather than
  at a higher level when mbufs are directly free()'d.

- Add mac_copy_mbuf_tag() to support m_copy_pkthdr() and related
  notions.

- Generally change all references to mbuf labels so that they use
  mbuf_to_label() rather than &mbuf->m_pkthdr.label.  This
  required no changes in the MAC policies (yay!).

- Tweak mbuf release routines to not call mac_destroy_mbuf(),
  tag destruction takes care of it for us now.

- Remove MAC magic from m_copy_pkthdr() and m_move_pkthdr() --
  the existing m_tag support does all this for us.  Note that
  we can no longer just zero the m_tag list on the target mbuf,
  rather, we have to delete the chain because m_tag's will
  already be hung off freshly allocated mbuf's.

- Tweak m_tag copying routines so that if we're copying a MAC
  m_tag, we don't do a binary copy, rather, we initialize the
  new storage and do a deep copy of the label.

- Remove use of MAC_FLAG_INITIALIZED in a few bizarre places
  having to do with mbuf header copies previously.

- When an mbuf is copied in ip_input(), we no longer need to
  explicitly copy the label because it will get handled by the
  m_tag code now.

- No longer any weird handling of MAC labels in if_loop.c during
  header copies.

- Add MPC_LOADTIME_FLAG_LABELMBUFS flag to Biba, MLS, mac_test.
  In mac_test, handle the label==NULL case, since it can be
  dynamically loaded.

In order to improve performance with this change, introduce the notion
of "lazy MAC label allocation" -- only allocate m_tag storage for MAC
labels if we're running with a policy that uses MAC labels on mbufs.
Policies declare this intent by setting the MPC_LOADTIME_FLAG_LABELMBUFS
flag in their load-time flags field during declaration.  Note: this
opens up the possibility of post-boot policy modules getting back NULL
slot entries even though they have policy invariants of non-NULL slot
entries, as the policy might have been loaded after the mbuf was
allocated, leaving the mbuf without label storage.  Policies that cannot
handle this case must be declared as NOTLATE, or must be modified.

- mac_labelmbufs holds the current cumulative status as to whether
  any policies require mbuf labeling or not.  This is updated whenever
  the active policy set changes by the function mac_policy_updateflags().
  The function iterates the list and checks whether any have the
  flag set.  Write access to this variable is protected by the policy
  list; read access is currently not protected for performance reasons.
  This might change if it causes problems.

- Add MAC_POLICY_LIST_ASSERT_EXCLUSIVE() to permit the flags update
  function to assert appropriate locks.

- This makes allocation in mac_init_mbuf() conditional on the flag.

Reviewed by:	sam
Obtained from:	TrustedBSD Project
Sponsored by:	DARPA, Network Associates Laboratories
2003-04-14 20:39:06 +00:00
Dag-Erling Smørgrav
fe58453891 Introduce an M_ASSERTPKTHDR() macro which performs the very common task
of asserting that an mbuf has a packet header.  Use it instead of hand-
rolled versions wherever applicable.

Submitted by:	Hiten Pandya <hiten@unixdaemons.com>
2003-04-08 14:25:47 +00:00
Peter Wemm
3c6b084e96 Finish driving a stake through the heart of netns and the associated
ifdefs scattered around the place - its dead Jim!

The SMB stuff had stolen AF_NS, make it official.
2003-03-05 19:24:24 +00:00
Jonathan Lemon
1cafed3941 Update netisr handling; Each SWI now registers its queue, and all queue
drain routines are done by swi_net, which allows for better queue control
at some future point.  Packets may also be directly dispatched to a netisr
instead of queued, this may be of interest at some installations, but
currently defaults to off.

Reviewed by: hsu, silby, jayanth, sam
Sponsored by: DARPA, NAI Labs
2003-03-04 23:19:55 +00:00
Warner Losh
a163d034fa Back out M_* changes, per decision of the TRB.
Approved by: trb
2003-02-19 05:47:46 +00:00
Alfred Perlstein
44956c9863 Remove M_TRYWAIT/M_WAITOK/M_WAIT. Callers should use 0.
Merge M_NOWAIT/M_DONTWAIT into a single flag M_NOWAIT.
2003-01-21 08:56:16 +00:00
Sam Leffler
53d96a08a4 don't reference a pkthdr after M_MOVE_PKTHDR has "remove it"; instead
reference the pkthdr now in the destination of the move

Sponsored by:	Vernier Networks
2003-01-06 21:33:54 +00:00
Sam Leffler
9967cafc49 Correct mbuf packet header propagation. Previously, packet headers
were sometimes propagated using M_COPY_PKTHDR which actually did
something between a "move" and a  "copy" operation.  This is replaced
by M_MOVE_PKTHDR (which copies the pkthdr contents and "removes" it
from the source mbuf) and m_dup_pkthdr which copies the packet
header contents including any m_tag chain.  This corrects numerous
problems whereby mbuf tags could be lost during packet manipulations.

These changes also introduce arguments to m_tag_copy and m_tag_copy_chain
to specify if the tag copy work should potentially block.  This
introduces an incompatibility with openbsd which we may want to revisit.

Note that move/dup of packet headers does not handle target mbufs
that have a cluster bound to them.  We may want to support this;
for now we watch for it with an assert.

Finally, M_COPYFLAGS was updated to include M_FIRSTFRAG|M_LASTFRAG.

Supported by:	Vernier Networks
Reviewed by:	Robert Watson <rwatson@FreeBSD.org>
2002-12-30 20:22:40 +00:00
Robert Watson
fe6fb873dc Under some circumstances, the loopback interface will allocate a new
mbuf for a packet looping back to provide alignment guarantees for
KAME.  Unfortunately, this code performs a direct copy of the header
rather than using a header copying primitive (largely because we have
sucky header copying primitives).  This results in a multiple free
of the MAC label in the header when the same label data is freed
twice when the two mbufs with that header are freed.  As a temporary
work-around, clear the initialized flag on the label to prevent the
duplicate free, which prevents panics on large unaligned loopback
IP and IPv6 data.  The real fix is to improve and make use of proper
packet header copying routines here.

Obtained from:	TrustedBSD Project
Sponsored by:	DARPA, Network Associates Laboratories
2002-12-18 15:34:17 +00:00
Sam Leffler
6fc32a2495 network interface and link layer changes:
o on input don't strip the Ethernet header from packets
o input packet handling is now done with if_input
o track changes to ether_ifattach/ether_ifdetach API
o track changes to bpf tapping
o call ether_ioctl for default handling of ioctl's
o use constants from net/ethernet.h where possible

Reviewed by:	many
Approved by:	re
2002-11-15 00:00:15 +00:00
Sam Leffler
5d84645305 Replace aux mbufs with packet tags:
o instead of a list of mbufs use a list of m_tag structures a la openbsd
o for netgraph et. al. extend the stock openbsd m_tag to include a 32-bit
  ABI/module number cookie
o for openbsd compatibility define a well-known cookie MTAG_ABI_COMPAT and
  use this in defining openbsd-compatible m_tag_find and m_tag_get routines
o rewrite KAME use of aux mbufs in terms of packet tags
o eliminate the most heavily used aux mbufs by adding an additional struct
  inpcb parameter to ip_output and ip6_output to allow the IPsec code to
  locate the security policy to apply to outbound packets
o bump __FreeBSD_version so code can be conditionalized
o fixup ipfilter's call to ip_output based on __FreeBSD_version

Reviewed by:	julian, luigi (silent), -arch, -net, darren
Approved by:	julian, silence from everyone else
Obtained from:	openbsd (mostly)
MFC after:	1 month
2002-10-16 01:54:46 +00:00
Brooks Davis
ae5a19be8e Move all unit number management cloned interfaces into the cloning
code.  The reverts the API change which made the <if>_clone_destory()
functions return an int instead of void bringing us into closer
alignment with NetBSD.

Reviewed by:	net (a long time ago)
2002-05-25 20:17:04 +00:00
Luigi Rizzo
d722be5487 Replace (deprecated ?) FREE() macro with direct calls to free() 2002-04-04 06:03:17 +00:00
Maxime Henrion
3b16e7b252 Simplify the interface cloning framework by handling unit
unit allocation with a bitmap in the generic layer.  This
allows us to get rid of the duplicated rman code in every
clonable interface.

Reviewed by:	brooks
Approved by:	phk
2002-03-11 09:26:07 +00:00
Brooks Davis
3d4ce33dbf Add cloning support to the loopback interface.
Submitted by:	mux
2002-03-04 21:46:00 +00:00
Jake Burkholder
ebffbf8c3e sparc64 needs the same alingment fixes that alpha and ia64 do.
Submitted by:	tmm
2001-12-29 08:45:17 +00:00
Jonathan Lemon
effa274e9e whitespace fixes. 2001-12-14 19:32:47 +00:00
Ruslan Ermilov
8071913df2 Pull post-4.4BSD change to sys/net/route.c from BSD/OS 4.2.
Have sys/net/route.c:rtrequest1(), which takes ``rt_addrinfo *''
as the argument.  Pass rt_addrinfo all the way down to rtrequest1
and ifa->ifa_rtrequest.  3rd argument of ifa->ifa_rtrequest is now
``rt_addrinfo *'' instead of ``sockaddr *'' (almost noone is
using it anyways).

Benefit: the following command now works.  Previously we needed
two route(8) invocations, "add" then "change".
# route add -inet6 default ::1 -ifp gif0

Remove unsafe typecast in rtrequest(), from ``rtentry *'' to
``sockaddr *''.  It was introduced by 4.3BSD-Reno and never
corrected.

Obtained from:	BSD/OS, NetBSD
MFC after:	1 month
PR:		kern/28360
2001-10-17 18:07:05 +00:00
Ruslan Ermilov
fe6db7c77e Revision 1.32 corresponded to CSRG revision 8.2. 2001-10-17 10:44:39 +00:00
Doug Rabson
23620bde07 Add ia64 to the list of machines which don't do unaligned reads. 2001-10-05 19:04:23 +00:00
Peter Wemm
8cdfefbd0c Remove/comment tokens after #endif (#endif NETATALK) 2001-09-10 01:33:03 +00:00