Commit Graph

9158 Commits

Author SHA1 Message Date
Orion Hodson
96524a52b6 Use SOUND_MIXER_IGAIN to toggle 20dB mic boost for want of a better
place for it.

Assorted comments.

Submitted by: luigi
2003-04-21 03:47:28 +00:00
Bill Paul
7aeaaee867 Regenerate. 2003-04-20 20:17:10 +00:00
Bill Paul
e5c195da55 Add support for the Netgear FA120 and the D-Link DUBE100 (AX88172-based
devices).
2003-04-20 20:15:42 +00:00
Bill Paul
6d179e5b69 Regen usbdevs. 2003-04-20 19:07:51 +00:00
Bill Paul
87b4a25958 Add device driver support for the ASIX Electronics AX88172 USB 2.0
ethernet controller. The driver has been tested with the LinkSys
USB200M adapter. I know for a fact that there are other devices out
there with this chip but don't have all the USB vendor/device IDs.

Note: I'm not sure if this will force the driver to end up in the
install kernel image or not. Special magic needs to be done to exclude
it to keep the boot floppies from bloating again, someone please
advise.
2003-04-20 19:05:33 +00:00
Maxime Henrion
a4d0f4d116 Convert the tx(4) driver to use the busdma API.
Special thanks to brueffer for sending me such a card so that
I could do this work.
2003-04-20 18:08:00 +00:00
Maxime Henrion
b9403c495e Better comment, more style(9) fixes. 2003-04-20 17:36:26 +00:00
Orion Hodson
6635978f23 Additional malloc failure checks. 2003-04-20 17:08:56 +00:00
David E. O'Brien
82d4d32d65 more style(9) changes. 2003-04-20 09:07:14 +00:00
David E. O'Brien
e3da61d733 more style(9) changes. 2003-04-20 08:37:29 +00:00
David E. O'Brien
ee1ca8b7f5 A few style(9) fixes. 2003-04-20 07:43:09 +00:00
Maxime Henrion
2ccf1ce757 style(9). 2003-04-20 01:04:04 +00:00
Maxime Henrion
6d63c80290 Make this file closer to style(9) paradigm. 2003-04-19 17:24:07 +00:00
Maxime Henrion
3566dff0d9 - Enable interrupts only at the end of epic_attach() when all the
other initializations succeeded.
- Initialize the TX and RX rings in epic_attach() rather than in
  epic_init() where we're not supposed to fail.  Similarly, free
  the TX and RX rings in epic_detach() rather than in epic_stop().
- Change epic_init() to be a void function now that it can't fail.
  Also change its parameter to a void * so that we have a correct
  prototype for if_init.
- Now that epic_init() has a correct prototype, don't cast the
  function pointer when initializing if_init.
- Fix nearby style bugs.
2003-04-19 13:51:24 +00:00
Maxime Henrion
f78a230c3c - Correct a comment made bogus by my last commit.
- Use __FBSDID.
2003-04-19 00:28:49 +00:00
Maxime Henrion
8a2ec7627f Various cleanups:
- Don't initialize if_output, ether_ifattach() does this for us.
- Use pci_enable_busmaster() instead of using pci_read_config()
  and pci_write_config() directly.
- Don't try to enable I/O, bus_alloc_resource() does this for us.
2003-04-19 00:21:34 +00:00
Prafulla Deuskar
a40f7e92e2 Tell the upper layer(s) that we support long frames.
Not doing this caused the vlan mtu to be reduced by 4 bytes.

Submitted by:	Doug Ambrisko (ambrisko)
MFC after:	1 day
2003-04-18 17:36:13 +00:00
MIHIRA Sanpei Yoshiro
97f9172896 Add support for Planex FNW-3602-T(CardBus 100M/10M).
Submitted by:	kazz <kazz@v001.vaio.ne.jp>
Obtained from:	[bsd-nomads:16637]
2003-04-18 15:42:25 +00:00
MIHIRA Sanpei Yoshiro
26954ebf4e Sync to 1.48 2003-04-18 15:35:52 +00:00
MIHIRA Sanpei Yoshiro
2af37380c8 fix corega vendor id(use vendor string and product string)
Submitted by:	imp
2003-04-18 14:52:14 +00:00
David E. O'Brien
aca6bb0d8c Sync with Creative's 8010.h rev 1.39. 2003-04-18 04:13:38 +00:00
Nate Lawson
693f4477b1 Revise attach/detach resource cleanup
- Unconditionally call *_stop() if device is in the tree. This is to
  prevent callouts from happening after the device is gone. Checks for
  bus_child_present() should be added in the future to keep from touching
  potentially non-existent hardware in *_detach().  Found by iedowse@.
- Always check for and free miibus children, even if the device is not in
  the tree since some failure cases could have gotten here.
- Call ether_ifdetach() in the irq setup failure case
- ti(4), xl(4): move ifmedia_init() calls to the beginning of attach so
  that ifmedia_removeall() can be unconditionally called on detach. There
  is no way to detect whether ifmedia has been initialized without using
  a separate variable (as tl(4) does).
- Add comments to indicate assumptions of code path
2003-04-17 20:32:06 +00:00
John Hay
e37f27be24 Get wlread() closer to working. Use m->m_len as the initial value for
bytes_in_mbuf rather than MCLBYTES. Add the ethertnet header to the
front of the mbuf. Adjust bytes_in_mbuf inside the loop that reads
the packet out of the card.
2003-04-17 17:51:24 +00:00
John Hay
a368c85b62 Add locking to wlinit(). 2003-04-17 17:45:58 +00:00
John Hay
cc8e8a9865 Put the spl calls back until we are sure that everything that they cover
are locked.
2003-04-17 15:42:30 +00:00
Orion Hodson
5a289baba9 Perform warm or cold reset AC97 per the spec depending on state of the
codec during initialization.  This code mirrors the reset code used on
the VIA82c686 and fixes a codec initialization failure (SoundMAX
AD1885) reported by Matthias Schuendehuette.
2003-04-17 15:04:11 +00:00
Ian Dowse
2ea36df806 Revert part of revision 1.97 by calling dc_stop() unconditionally
in dc_detach() instead of only calling it if the hardware is preset.
This is a workaround for page faults in softclock() after a `dc'
device was detached, caused by not disabling a timer before freeing
its memory. The bus_child_present() checks should probably be
re-added later, but only to avoid the hardware accesses and not the
other resource cleanups in dc_stop().

Approved by:	njl
2003-04-17 08:36:52 +00:00
Hidetoshi Shimokawa
77ee030b5f MFp4(simokawa_firewire):
Many internal structure changes for the FireWire driver.

- Compute CRC in CROM parsing.
- Add support for configuration ROM build.
- Simplify dummy buffer handling.
- busdma conversion
- Use swi_taskqueue_giant for -current.  Mark the interrupt routine as MPSAFE.
- AR buffer handling.
	Don't reallocate AR buffer but just recycle it.
	Don't malloc and copy per packet in fwohci_arcv().
	Pass packet to fw_rcv() using iovec.
	Application must prepare receiving buffer in advance.
- Change fw_bind API so that application should pre-allocate xfer structure.
- Add fw_xfer_unload() for recycling struct fw_xfer.
- Add post_busreset hook
- Remove unused 'sub' and 'act_type' in struct fw_xfer.
- Remove npacket from struct fw_bulkxfer.
- Don't call back handlers in fwochi_arcv() if the packet has
	not drained in AT queue
- Make firewire works on big endian platform.
- Use native endian for packet header and remove unnecessary ntohX/htonX.
- Remove FWXFERQ_PACKET mode.  We don't use it anymore.
- Remove unnecessary restriction of FWSTMAXCHUNK.
- Don't set root node for phy config packet if the root node is
	not cycle master capable but set myself for root node.
	We should be the root node after next bus reset.

	Spotted by: Yoshihiro Tabira <tabira@scd.mei.co.jp>
- Improve self id handling

Tested on: i386, sparc64 and i386 with forced bounce buffer
2003-04-17 03:38:03 +00:00
Poul-Henning Kamp
a300701213 Don't include <sys/disklabel.h> 2003-04-16 20:57:35 +00:00
Poul-Henning Kamp
8f18989721 Include <sys/ioccom.h> instead of <sys/disklabel.h> 2003-04-16 20:46:30 +00:00
John Hay
96b695d7cc Add locking and remove all the spl() calls. 2003-04-16 17:42:38 +00:00
John Hay
6bf16104bf Get rid of COMPAT_OLDISA and move in the direction of newbus. 2003-04-16 17:29:00 +00:00
John Hay
81b9d04c1d Remove the register keyword. 2003-04-16 15:52:20 +00:00
Maxim Sobolev
2bce79a21d Update comment to match reality. 2003-04-16 09:16:55 +00:00
Søren Schmidt
29273dcd58 Cosmetics. 2003-04-16 08:30:40 +00:00
Søren Schmidt
db16c8c28b Fix a panic with Cenatek controllers. 2003-04-16 08:30:10 +00:00
Hidetoshi Shimokawa
30eaffaf6c Fix bogus maxsegsz parameter for bus_dma_tag_create().
MFC: 1 week
2003-04-16 05:03:35 +00:00
Matthew N. Dodd
533294b956 - Don't call pci_enable_io() in drivers (unless needed for resume).
- Don't test memory/port status and emit an error message; the PCI
  bus code will do this now.
2003-04-16 03:16:57 +00:00
Matthew N. Dodd
c047e5b1a9 Return status for PCI methods '{enable,disable}_{io,busmaster}'.
Reviewed by:	imp
2003-04-16 03:15:08 +00:00
Warner Losh
7f2af527b0 When the driver allocates memory or I/O ports, enable that bit in the
command config register.  At the present, this represents a nop
because these bits should have been set earlier in the process.  In
the future, we'll only set these bits when the driver requests the
resource, not when the bus code detects the resource.

Reviewed by: mdodd
2003-04-15 19:38:18 +00:00
Max Khon
0d9d548cbe cosmetic style fixes 2003-04-15 17:26:28 +00:00
Matthew N. Dodd
f246e4a17f - Express hard dependencies on bus (pci, isa, pccard) and
network layer (ether).
- Don't abuse module names to facilitate ifconfig module loading;
  such abuse isn't really needed.  (And if we do need type information
  associated with a module then we should make it explicit and not
  use hacks.)
2003-04-15 06:37:30 +00:00
Maxim Sobolev
cf0d8a1e48 Use pci_enable_{busmaster|io}() instead of directly writing into
PCI configuration register.

Submitted by:	mdodd
2003-04-14 15:50:04 +00:00
Bernd Walter
65193b3e5d Use a sim for each device on it's own instead of one for all umass
devices.
This reduces complexity and fixes a number of small problems.

Approved by:	gallatin (mentor)
Reviewed by:	njl
2003-04-14 14:28:17 +00:00
Hidetoshi Shimokawa
050871cc4f Panic if bus_dmamap_load() doesn't respect maxsegsz. 2003-04-14 14:17:49 +00:00
Bernd Walter
ca3acad1d7 add EHCI (USB 2.0) controller support.
Approved by:	joe
		gallatin (mentor)
Obtained from:  NetBSD
2003-04-14 14:04:08 +00:00
Maxim Sobolev
bb342a3713 Before attaching device set PCIM_CMD_PORTEN in addition to
PCIM_CMD_MEMEN and PCIM_CMD_BUSMASTEREN, becaise some braindead
BIOSes (such as one found in my vprmatrix notebook) forget
to initialize it properly resulting in attachment failure.
2003-04-14 09:45:25 +00:00
Poul-Henning Kamp
7715475960 More correct patch: Only call biofinish if we have not already sent
any children down the mesh.
2003-04-14 08:49:54 +00:00
Poul-Henning Kamp
2f912fc976 Call biofinish() also when we get a malloc() failure. 2003-04-14 08:08:17 +00:00
Max Khon
7d0de413cb Driver for Granch SBNI16 SHDSL modem
Submitted by:	Denis I. Timofeev <timofeev@granch.ru>
MFC after:	1 week
2003-04-13 06:27:13 +00:00