Commit Graph

20 Commits

Author SHA1 Message Date
Matthew N. Dodd
f246e4a17f - Express hard dependencies on bus (pci, isa, pccard) and
network layer (ether).
- Don't abuse module names to facilitate ifconfig module loading;
  such abuse isn't really needed.  (And if we do need type information
  associated with a module then we should make it explicit and not
  use hacks.)
2003-04-15 06:37:30 +00:00
Warner Losh
5414629575 Don't lock in the attach routine. It isn't required. Register the
interrupt handler last.  This gets rid of the sleep while locked
messages.

Reviewed by: ambrisko
2003-04-10 05:12:45 +00:00
Warner Losh
f5746231ff Make sure that pp_name is non-null before setting the device
description.  This allows us to rely entirely on the CIS entries if
necessary...
2003-04-10 04:36:02 +00:00
David E. O'Brien
8368cf8f75 Use __FBSDID rather than rcsid[]. 2003-04-03 21:36:33 +00:00
Warner Losh
1493e06d04 an driver now needs wlan, so put the required explicit depends
into the source.

Reviewed by: ambrisko
2003-02-17 19:57:32 +00:00
Doug Ambrisko
6cafe2646a Add support for MPI-350 the mini-pci Cisco Aironet card. This needs more
work.  The interface was gleaned from the Linux driver.  Currently only
one RX & one TX buffer are used.  Firmware support is not tested so for the
MPI-350 so it is disabled.  Signal cache and monitor mode are not supported
yet.  Signal cache is not supported since in encapsulation mode ethernet
frames are returned by the chip.  LAN monitor mode support will be added
shortly.  Thanks to Warner for the MPI-350 card he sent me.

Add support for RSSI map from PR kern/32880 which was incomplete.  Enhanced
with the ability to select the cache mode of raw, dbm or per-cent.

Clean up Signal/Noise/Quality structures and units with help from
Marco Molteni.

Change flash to use a malloc'ed buffer when needed.

PR:		kern/32880
Submitted by:	Douglas S. J. De Couto decouto@pdos.lcs.mit.edu,
		Marco Molteni
MFC:		3 weeks
2002-12-29 19:22:07 +00:00
Sam Leffler
673d91916d network interface driver changes:
o don't strip the Ethernet header from inbound packets; pass packets
  up the stack intact (required significant changes to some drivers)
o reference common definitions in net/ethernet.h (e.g. ETHER_ALIGN)
o track ether_ifattach/ether_ifdetach API changes
o track bpf changes (use BPF_TAP and BPF_MTAP)
o track vlan changes (ifnet capabilities, revised processing scheme, etc.)
o use if_input to pass packets "up"
o call ether_ioctl for default handling of ioctls

Reviewed by:	many
Approved by:	re
2002-11-14 23:54:55 +00:00
Warner Losh
b9efeffff0 Minor style problem I introduced recently 2001-11-15 06:44:43 +00:00
Warner Losh
34e4437eb0 Hoist the Card/Card2 macros that I invented for the wi driver into
pccard layer and rename them PCMCIA_CARD and PCMCIA_CARD2 respectively
(note, this is being done with an eye towards NetBSD integreation so
it is easier to keep lists of cards between us and them in sync).

Use this in the an and wi drivers.
2001-11-15 06:37:13 +00:00
Warner Losh
3a102d6984 Add PC4500 and 350 for newer cards in this line.
Obtained from: NetBSD's an driver (and FreeBSD's /etc/defaults/pccard.conf)
2001-11-15 06:26:24 +00:00
Warner Losh
a0945bbc7f Add NEWCARD support for aironet stuff.
PR:		24854
Submitted by:	"Sam Habash" <the+xp@llama.com>
(with the mtx fix by Jonathan Chen)
2001-11-15 06:18:06 +00:00
Brooks Davis
a744995d49 Lots of style(9) related white space fixes. Mostly missing spaces
after if, for, while, switch, '{', and '}' plus a bunch of bogus
whitespace at the end of lines.
2001-09-10 02:36:18 +00:00
Poul-Henning Kamp
419d8080a4 Currently, each wireless networking driver has it's own control program
despite the fact that most people want to set exactly the same settings
regardless of which card they have.  It has been repeatidly suggested
that this configuration should be done via ifconfig.  This patch
implements the required functionality in ifconfig and add support to the
wi and an drivers.  It also provides partial, untested support for the
awi driver.

PR:		25577
Submitted by:	Brooks Davis <brooks@one-eyed-alien.net>
2001-05-26 09:27:08 +00:00
John Baldwin
f34fa851e0 Catch up to header include changes:
- <sys/mutex.h> now requires <sys/systm.h>
- <sys/mutex.h> and <sys/sx.h> now require <sys/lock.h>
2001-03-28 09:17:56 +00:00
John Baldwin
35e0e5b311 Catch up to moving headers:
- machine/ipl.h -> sys/ipl.h
- machine/mutex.h -> sys/mutex.h
2000-10-20 07:58:15 +00:00
Bill Paul
a95b77ec78 Remember to assign an_dev to device_t before calling an_attach(). 2000-10-13 22:04:20 +00:00
Bill Paul
736f03e49a Convert the Aironet driver to use mutexes instead of spls. 2000-10-13 21:58:36 +00:00
Archie Cobbs
21b8ebd926 Make all Ethernet drivers attach using ether_ifattach() and detach using
ether_ifdetach().

The former consolidates the operations of if_attach(), ng_ether_attach(),
and bpfattach(). The latter consolidates the corresponding detach operations.

Reviewed by:	julian, freebsd-net
2000-07-13 22:54:34 +00:00
Warner Losh
3f994c78d5 Remove unloaded printf. We do this now in the newbus layer. 2000-04-17 04:39:38 +00:00
Bill Paul
261b9b3066 Add driver support for the Aironet 4500/4800 series wireless 802.11
NICs. (Finally!) The PCMCIA, ISA and PCI varieties are all supported,
though only the ISA and PCI ones will work on the alpha for now.
PCCARD, ISA and PCI attachments are all provided. Also provided an
ancontrol(8) utility for configuring the NIC, man pages, and updated
pccard.conf.sample. ISA cards are supported in both ISA PnP and hard-wired
mode, although you must configure the kernel explicitly to support the
hardwired mode since you have to know the I/O address and port ahead
of time.

Special thanks to Doug Ambrisko for doing the initial newbus hackery
and getting it to work in infrastructure mode.
2000-01-14 20:41:03 +00:00