Commit Graph

1204 Commits

Author SHA1 Message Date
Marcel Moolenaar
216e80c2ba Move the prototypes of db_md_set_watchpoint(), db_md_clr_watchpoint()
and db_md_list_watchpoints() to ddb/ddb.h.
2005-09-10 03:01:25 +00:00
Alan Cox
ba8bca610c Pass a value of type vm_prot_t to pmap_enter_quick() so that it determine
whether the mapping should permit execute access.
2005-09-03 18:20:20 +00:00
Stefan Farfeleder
a1f85d7f83 Move MINSIGSTKSZ from <machine/signal.h> to <machine/_limits.h> and rename
it to __MINSIGSTKSZ.  Define MINSIGSTKSZ in <sys/signal.h>.

This is done in order to use MINSIGSTKSZ for the macro PTHREAD_STACK_MIN
in <pthread.h> (soon <limits.h>) without having to include the whole
<sys/signal.h> header.

Discussed with:		bde
2005-08-20 16:44:41 +00:00
Stefan Farfeleder
017261026e Remove a stale occurrence of 'alpha' in a comment. 2005-08-20 13:11:17 +00:00
Marius Strobl
4571e2104f Now that at least some screen savers work on sparc64 sync with other
archs and enable splash(4) by default (the non-working screen savers
either don't compile or just have no effect when loaded, i.e. don't
cause harm).

MFC after:	1 week
2005-08-15 21:15:07 +00:00
Marius Strobl
d11b733f41 The system tick _compare_ register of USIII CPUs and up is ASR25, not
ASR24 (which is the system tick register).
2005-08-07 13:21:00 +00:00
Jeff Roberson
8d511e2a05 - Add support for saving stack traces and displaying them via printf(9)
and KTR.

Contributed by:		Antoine Brodin <antoine.brodin@laposte.net>
Concept code from:	Neal Fachan <neal@isilon.com>
2005-08-03 04:27:40 +00:00
John Baldwin
d9610574a2 Add extra constraints to tell the compiler that the memory be modified
in the arm __swp() and sparc64 casa() and casax() functions is actually
being used as an input and output and not just the value of the register
that points to the memory location.  This was the underlying source of
the mbuf refcount problems on sparc64 a while back.  For arm this should be
a nop because __swp() has a constraint to clobber all memory which can
probably be removed now.

Reviewed by:	alc, cognet
MFC after:	1 week
2005-07-27 20:01:45 +00:00
John Baldwin
122eceef61 Convert the atomic_ptr() operations over to operating on uintptr_t
variables rather than void * variables.  This makes it easier and simpler
to get asm constraints and volatile keywords correct.

MFC after:	3 days
Tested on:	i386, alpha, sparc64
Compiled on:	ia64, powerpc, amd64
Kernel toolchain busted on:	arm
2005-07-15 18:17:59 +00:00
Ken Smith
22e59cec3b Add recently invented COMPAT_FREEBSD5 option.
MFC after:	3 days
2005-07-14 15:39:06 +00:00
David Xu
740fd64d65 Validate if the value written into {FS,GS}.base is a canonical
address, writting non-canonical address can cause kernel a panic,
by restricting base values to 0..VM_MAXUSER_ADDRESS, ensuring
only canonical values get written to the registers.

Reviewed by: peter, Josepha Koshy < joseph.koshy at gmail dot com >
Approved by: re (scottl)
2005-07-10 23:31:11 +00:00
Marius Strobl
a2ffe82f1d - Declare lookup tables etc. const.
- Let creator_bitblt() return ENODEV as it's not implemented (missed
  in sys/dev/fb/creator.c rev. 1.6).
- As a speed optimization inline the creator_ras_wait() etc. helper
  functions and also cache setting the font increment, font width
  and plane mask. [1]
- I got the meaning of V_DISPLAY_BLANK wrong, it's blank like turn
  off and not blank like turn on and clear the screen. So move
  clearing the screen to creator_clear() were it hopefully belongs.
- Properly implement V_DISPLAY_BLANK, V_DISPLAY_STAND_BY and
  V_DISPLAY_SUSPEND. This makes blank_saver.ko and green_saver.ko
  work. [1]
- Change the order of operations in creator_fill_rect(), i.e. write
  y before x and cy before cx. This fixes drawing the top part of
  the border with Elite3D cards when switching from Xorg to a VTY.
- Move setting the chip configuration we use and invalidating the
  cache variables to creator_set_mode() and set the V_ADP_MODECHANGE
  flag. This causes creator_set_mode() to be called when the X server
  shuts down which fixes the screen corruption caused most of the
  time by Xorg not restoring the original configuration present at
  startup.

Inspired by/based on:	Xorg [1]
Approved by:		re (scottl)
2005-07-10 11:16:34 +00:00
David E. O'Brien
c3e0dfa1f8 Add .cvsignore files just like in sys/<arch>/compiled, this keeps CVS from
questing kernel config files not in CVS.

Approved by:	re(kensmith)
2005-06-20 16:52:59 +00:00
Marius Strobl
a3d97e12a0 Turn on atkbdc(4), atkbd(4), creator(4), machfb(4), syscons(4), ohci(4),
psm(4), ukbd(4), ums(4) and usb(4) on by default. Modulo some nits with
the most annoying one probably being USB keyboards no longer working at
the OFW boot prompt after halting FreeBSD these drivers work fine on
sparc64 including X and there's nothing left that I'd consider a show-
stopper. I.e. graphical consoles on sun4u machines should either work
out of the box or by plugging in a card that is supported by either
creator(4) or machfb(4). The exception obviously are SBus-only machines
without UPA slots like some Ultra 1 (but which also still lack support
in other areas) and certain Exx0 (but which probably are mainly used
with serial consoles anyway). I'll try to add a cgsix(4) for these later
as Sun CG6 cards are probably the most common SBus framebuffer cards in
sun4u machines. I however don't see much sense in adding drivers for the
dozen of SBus framebuffers that were destined for sparc v8 machines.
The rest of the USB drivers aren't enabled as I'm only aware of ukbd(4)
and ums(4) as well as ohci(4) working with the on-board ALI M5237 and
Sun PCIO-2 controllers. Aue(4) definitely doesn't work on sparc64, yet.

Thanks to:
- Jake for the initial work on syscons(4) on sparc64 and creator(4).
- Marcel for uart(4) and especially for its support for the SCCs which
  are only used on sparc64 so far. In various regards it wouldn't have
  been possible to enable syscons(4) by default on sparc64, yet, without
  uart(4).
- All that tested patches.

Ok'ed by:	scottl (RE hat), tmm
2005-06-10 23:11:16 +00:00
Marius Strobl
c2722b8fcf - Hook up atkbdc(4), atkbd(4) and psm(4) to the sparc64 build, not
enabled in GENERIC by default, yet.
- While here remove the exclusion of ukbd(4) from the sparc64 NOTES
  as ukbd(4) compiles and works on sparc64.
2005-06-10 20:58:59 +00:00
Alan Cox
1c245ae7d1 Introduce a procedure, pmap_page_init(), that initializes the
vm_page's machine-dependent fields.  Use this function in
vm_pageq_add_new_page() so that the vm_page's machine-dependent and
machine-independent fields are initialized at the same time.

Remove code from pmap_init() for initializing the vm_page's
machine-dependent fields.

Remove stale comments from pmap_init().

Eliminate the Boolean variable pmap_initialized from the alpha, amd64,
i386, and ia64 pmap implementations.  Its use is no longer required
because of the above changes and earlier changes that result in physical
memory that is being mapped at initialization time being mapped without
pv entries.

Tested by: cognet, kensmith, marcel
2005-06-10 03:33:36 +00:00
Joseph Koshy
f263522a45 MFP4:
- Implement sampling modes and logging support in hwpmc(4).

- Separate MI and MD parts of hwpmc(4) and allow sharing of
  PMC implementations across different architectures.
  Add support for P4 (EMT64) style PMCs to the amd64 code.

- New pmcstat(8) options: -E (exit time counts) -W (counts
  every context switch), -R (print log file).

- pmc(3) API changes, improve our ability to keep ABI compatibility
  in the future.  Add more 'alias' names for commonly used events.

- bug fixes & documentation.
2005-06-09 19:45:09 +00:00
Marius Strobl
708c604382 Remove superfluous breaks. 2005-06-05 10:16:27 +00:00
Marius Strobl
fce21e7e25 After some input from bde@ and rereading the datasheet use a MTX_SPIN
mutex instead of a MTX_DEF one in order to defer preemption while
reading the date and time registers. If we don't manage to read them
within the time slot where we are guaranteed that no updates occur we
might actually read them during an update in which case the output is
undefined.
2005-06-04 23:24:50 +00:00
Marius Strobl
df4b30bee2 - In creator_configure() when probed for the high-level console return
the number of registered adapters instead of determining again whether
  stdout is a supported card (and which might have failed to attach and
  register).
- Drop creator_set_mode() and move the relevant parts to creator_fill_rect()
  and creator_putc() respectively. This is a bit cleaner than having to
  make sure that creator_set_mode() was called before creator_fill_rect()
  or creator_putc() are used and matches better what Xorg does.
- Fix a bug in the handling of the FBIOSCURSOR IOCTL; the code was meant
  to return ENODEV for all invocations expect when used to disable the
  cursor and not just when used for enabling the cursor.
- In case the adapter is the OFW stdout move its OFW cursor to the start
  of the last line on halt so OFW output doesn't get intermixed with what
  FreeBSD left on the screen. With hindsight this is what the faking of a
  hardware cursor which was removed in the last revision really was about,
  i.e. to keep the OFW updated about the current cursor position. The new
  approach however is simpler while producing the same result and doesn't
  cause the first letter of the OFW output to be turned into a blank and
  a newline.
- Add variable names to the prototypes of creator_cursor_*() which were
  added in the last revision and list them alphabetically in order to match
  the style of this file.
2005-06-04 21:15:27 +00:00
Marius Strobl
fa5b9b6f64 Now that all affected drivers have been changed remove the helpers
for the SYS_RES_IOPORT -> SYS_RES_MEMORY transition again. While it
was helpful to not need to change all of the affected drivers in a
single pass together with ebus(4) we probably shouldn't start into
6.0 with such a hack.
This requires some of the modules of affected drivers to be rebuilt,
namely: auxio(4), snd_audiocs(4) and puc(4).
2005-06-04 20:31:20 +00:00
Marcel Moolenaar
470cd51ee6 Create nexus in configure_first() instead of in configure(). This
makes sure that sysinit tasks that run after configure_first(),
but before configure() have a nexus to hang devices off.
2005-05-29 23:44:22 +00:00
Marcel Moolenaar
ba64ae0c94 Call cninit_finish() from configure_final(). 2005-05-29 22:53:48 +00:00
Yoshihiro Takahashi
d4fcf3cba5 Remove bus_{mem,p}io.h and related code for a micro-optimization on i386
and amd64.  The optimization is a trivial on recent machines.

Reviewed by:	-arch (imp, marcel, dfr)
2005-05-29 04:42:30 +00:00
Alan Cox
c49e22761a pmap_enter() no longer requires Giant. Therefore, stop acquiring and
releasing it in pmap_enter_quick().

MFC after: 3 weeks
2005-05-28 17:13:36 +00:00
Marius Strobl
fef0b157a8 - Hook up machfb(4) to the sparc64 build, not enabled in GENERIC
by default, yet.
- Replace "graphics cards" with "framebuffers" in the description
  of creator(4) in order to make it uniform with the description of
  machfb(4) and the latter occur both on-board and as add-on cards.
2005-05-21 20:50:45 +00:00
Marius Strobl
ff706bdfcf o creator(4):
- Use register macros instead of magic values in the code. [1]
  - Check the return values of OF_getprop() and other stuff that actually
    can fail.
  - Let the unimplemented video driver methods return ENODEV rather
    than 0 so other code isn't tricked into thinking a certain operation
    was successfull. In case of e.g. the video driver creator_ioctl()
    this caused vidcontrol(1) to return random garbage information.
    Remove the TODO macros in the unimplemented video driver methods
    which did a printf("%s: unimplemented\n", __func__). Under certain
    circumstances these managed to invoke a printf() when a low-level
    console device wasn't attached, yet, causing a Fast Data Access MMU
    Miss. These macros were only really usefull for development anyway.
  - Set the struct video_adapter and struct video_info va_flags and
    vi_flags etc. as appropriate.
  - In creator_configure() don't rely on hitting the node which is the
    chosen console device first when searching the OFW tree for adapters
    compatible with this driver. Instead just check whether the chosen
    console device is a viable target for this driver. Targets that are
    not the console (including additional cards in multi-head configs)
    will be attached through creator_upa_attach(). I think this how the
    code in creator_configure() was actually meant to work.
    Honour the VIO_PROBE_ONLY flag and don't initialise and register the
    console device twice when creator_configure() is called a second time
    during sc_probe_unit().
    Let creator_configure() return the number of the found adapters,
    i.e. 1 in case probing succeeds, as it's expected. The return values
    of video adapter configure functions however currently aren't checked
    so this doesn't make a difference at the moment.
  - In creator_upa_attach() don't rely on probing and attaching the
    adapter which is the console first, in case there are multiple
    adpaters and one of them is the console this could lead into using
    the video adapter unit 0 twice.
  - Make the check for DACs with inverted cursor control a bit more
    precise and actually honour that information when turning the cursor
    on or off. Add a helper function creator_cursor_enable() for this
    in order to keep code duplication low. [1]
  - Don't bother with faking a hardware cursor in case a device is the
    console. Apparently this was meant to start kernel output right after
    where the firmware left. In general this isn't worth the fuzz and
    also had no real effect as creator_set_mode() did clear the screen
    in any case, not just in case a device was not the console.
  - Implement creator_fill_rect() and use it to actually blank the
    display in creator_blank_display() when the mode is V_DISPLAY_BLANK,
    moving blanking the display out of creator_set_mode(). Use it also
    to implement creator_set_border() so the border can be re-drawn
    when switching to a VTY from X, exiting X, etc. (which leaves us
    with a black border most of the time).
  - Implement the video driver creator_ioctl(), moving the implementation
    of the IOCTL interface from the fbN CDEV version of creator_ioctl()
    into the video driver version and use the latter to implement the
    former. Use fb_commonioctl() to handle most of the FBIO IOCTLs.
    This gives programs like vidcontrol(1) which use the video driver
    creator_ioctl() a chance of working.
    Implement turning off the cursor via the FBIOSCURSOR IOCTL, which
    Xorg uses to in order to inform the OS that it's taking over the
    cursor. In creator_putm() check whether the cursor is enabled and
    (re-)install it if necessary, moving installing the cursor out of
    creator_init() and into a helper function creator_cursor_install().
    This fixes the missing mouse pointer when switching to a VTY from X,
    exiting X, etc.
  - Some clean-up (remove unused/useless code, etc.).

o sparc64/creator/creator_upa.c / sparc64/sparc64/sc_machdep.c:
  - Attach syscons(4) as an own pseudo-device on the nexus rather than
    directly in creator_upa_attach(), similiar to attaching syscons(4)
    as a pseudo-device on isa(4) on other archs. This makes it a whole
    lot easier to do the right thing in multi-head configs, especially
    with different types of graphics adapters. [2]
  - Set SC_AUTODETECT_KBD by default so USB keyboards work out of the
    box. [2]

Based on/obtained from:	Xorg 'ffb' driver [1]
Based on/obtained from:	FreeBSD/powerpc [2]
2005-05-21 20:38:26 +00:00
Marius Strobl
a831ab3810 - MFpowerpc: sys/powerpc/powerpc/nexus.c rev. 1.7 (partial)
Use bus_generic_probe() and add a bus_add_child() interface method to
  allow device drivers to use the identify method to add themselves if
  need be (e.g. syscons(4)).
- Use FBSDID.
2005-05-21 20:19:27 +00:00
Marius Strobl
820992ecfd - Make sure that the OFW address properties that are going to be decode
consist of the expected number of address and size cells (we can't use
  dynamic arrays here because at the point in the boot process when this
  code is used malloc() doesn't work, yet). This fixes a Fast Data Access
  MMU Miss when uart(4) (erroneously) calls OF_decode_addr() to decode
  the address of PS/2 keyboards. PS/2 keyboards use a different and also
  undocumented scheme at the first parent node than mapping at 'ranges'
  properties. It's however not worth implementing that other scheme and
  actually also fits atkbdc(4) better to just start at the first parent
  node of PS/2 keyboards which is the 8042 controller (I have atkbdc(4)
  working that way).
- Use FBSDID.

MFC after:	1 month
2005-05-21 20:17:01 +00:00
Marius Strobl
003daaea5f o mc146818(4):
- Add locking.
  - Account for if the MC146818_NO_CENT_ADJUST flag is set we don't need
    to check wheter year < POSIX_BASE_YEAR.
  - Add some comments about mapping the day of week from the range the
    generic clock code uses to the range the chip uses and which I meant
    to add in the initial version.
  - Minor clean-up, use __func__ instead of hardcoded function names in
    error strings.

o in the rtc(4) front-end additionally:
  - Don't leak resources in case mc146818_attach() fails.
  - Account for ebus(4) defaulting to SYS_RES_MEMORY for the memory
    resources since ebus.c rev. 1.22.
2005-05-19 21:20:42 +00:00
Marius Strobl
fb596371a9 - Add locking.
- Add support for storing the century in MK48TXX_WDAY_CB on MK48Txx with
  extended registers when the MK48TXX_NO_CENT_ADJUST flag is set (and which
  is termed somewhat confusing as it actually means don't manually adjust
  the century in the driver).
- Add the MI part of interfacing the watchdog functionality of MK48Txx with
  extended registers with watchdog(9). This is inspired by the SunOS/Solaris
  drivers for the 'eeprom' devices also having watchdog support. I actually
  expected this to work out of the box on Sun Exx00 machines with 'eeprom'
  devices which have a 'watchdog-enable' property. On terminal count of the
  the watchdog timer however only the MK48TXX_FLAGS_WDF bit rises but the
  reset signal and the interrupt respectively (depending on whether the
  MK48TXX_WDOG_WDS bit of the chip and the MK48TXX_WDOG_ENABLE_WDS flag
  of the driver respectively is set) goes nowhere. Apparently passing the
  reset signal on to the WDR line of the CPUs has to be enabled somewhere
  else but we don't have documentation for the Exx00 specific controllers.
  I decided to commit this nevertheless so it can be enabled in the eeprom(4)
  front-end later in e.g. 6.0-STABLE without breaking the API. Besides the
  Exx00 the watchdog part of the MK48Txx should also work on E250 and E450.
  Possibly also without extra fiddling on these machines but I haven't
  found someone willing to give it a try on such a machine so far.
- Use uintXX_t instead of u_intXX_t, use __func__ instead of hardcoded
  function names in error strings.
2005-05-19 21:16:50 +00:00
Marius Strobl
a0b2f8d7fc - Collapse eeprom_ebus.c and eeprom_sbus.c into eeprom.c and
eeprom_ebus_attach() and eeprom_sbus_attach() into eeprom_attach()
  respectively. Since the introduction of the ofw_bus interface some
  time ago and now that ebus(4) also uses SYS_RES_MEMORY for the
  memory resources since ebus.c rev. 1.22 there is no longer a
  need to have separate front-ends for ebus(4), fhc(4) and sbus(4).
- Fail gracefully instead of panicing when the model can't be
  determined.
- Don't leak resources when mk48txx_attach() fails.
- Use FBSDID.
2005-05-19 18:15:37 +00:00
Marius Strobl
176da80446 - Artificially using SYS_RES_IOPORT for EBus devices for reasons of
compatibility with ISA devices while in fact all known EBus devices
  actually use memory space turned out to be not a good idea as so far
  there is only the 'rtc' device known to show up either on an EBus or
  ISA bus but not on any of the other busses used on sparc64. However
  there are quite a couple of them that show up on either EBus, FireHose
  or SBus. In order to save extra code in the respective drivers switch
  ebus(4) to actually use SYS_RES_MEMORY for the memory resources of
  its children. At least for transition still accept SYS_RES_IOPORT
  and silently change it to SYS_RES_MEMORY. [1]
- In ebus_probe() use ofw_bus_get_name() instead of re-implementing it
  via ofw_bus_get_node() and OF_getprop().
- Remove some unused variables.
- Use FBSDID.

Discussed with:	tmm (some time ago)
2005-05-19 18:11:46 +00:00
Marius Strobl
42be1191a0 - When iterating over the register resources of the children don't use
the iteration variable as the RID when adding the respective resource
  to the child via bus_set_resource(). In case a device has both I/O
  and memory resources this generates gaps in the newbus resources of
  the child, e.g. its first memory resource might end up as RID 1.
  To solve this mimic resource_list_add_next() via resource_list_find()
  and bus_set_resource(); we can't just use resource_list_add_next()
  here as this would circumvent the limit checks in isa_set_resource()
  of the common ISA code.
  This however is more or less a theoretical problem so far as all known
  ISA devices on sparc64 soley use I/O space.
- Just use bus_generic_rl_release_resource() for isa_release_resource()
  instead of re-implementing the former.
- Improve some comments to better reflect reality, minor clean-up and
  simplifications, return NULL instead of 0 were appropriate.
2005-05-19 15:47:37 +00:00
Marius Strobl
6283ced1e2 - Add suport for the bus_get_resource() device interface method to
central(4) and fhc(4) by using bus_generic_rl_get_resource().
- Remove some superfluous breaks in central.c
2005-05-19 15:09:56 +00:00
Marius Strobl
65fb49a994 - Try to not leak resources in the attach functions of the esp(4) SBus
front-end and the LSI64854 and NCR53C9x code in case one of these
  functions fails. Add detach functions to these parts and make esp(4)
  detachable.
- Revert rev. 1.7 of esp_sbus.c, since rev. 1.34 of sbus.c the clockfreq
  IVAR defaults to the per-child values.
- Merge ncr53c9x.c rev. 1.111 from NetBSD (partial):
  On reset, clear state flags and the msgout queue.
  In NetBSD code to notify the upper layer (i.e. CAM in FreeBSD) on reset
  was also added with this revision. This is believed to be not necessary
  in FreeBSD and was not merged.
  This makes ncr53c9x.c to be in sync with NetBSD up to rev. 1.114.
- Conditionalize the LSI64854 support on sbus(4) only instead of sbus(4)
  and esp(4) as it's also required for the 'dma', 'espdma' and 'ledma'
  busses/devices as well as the 'SUNW,bpp' device (printer port) which
  all hang off of sbus(4).
- Add a driver for the 'dma', 'espdma' and 'ledma' (pseudo-)busses/
  devices. These busses and devices actually represent the LSI64854 DMA
  engines for the ESP SCSI and LANCE Ethernet controllers found on the
  SBus of Ultra 1 and SBus add-on cards. With 'espdma' and 'ledma' the
  'esp' and 'le' devices hang off of the respective DMA bus instead of
  directly from the SBus. The 'dma' devices are either also used in this
  manner or on some add-on cards also as a companion device to an 'esp'
  device which also hangs off directly from the SBus. With the latter
  variant it's a bit tricky to glue the DMA engine to the core logic of
  the respective 'esp' device. With rev. 1.35 of sbus.c we are however
  guaranteed that such a 'dma' device is probed before the respective
  'esp' device which simplifies things a lot. [1]
- In the esp(4) SBus front-end read the part-unique ID code of Fast-SCSI
  capable chips the right way. This fixes erroneously detecting some
  chips as FAS366 when in fact they are not. Add explicit checks for the
  FAS100A, FAS216 and FAS236 variants instead treating all of these as
  ESP200. That way we can correctly set the respective Fast-SCSI config
  bits instead of driving them out of specs. This includes adding the
  FAS100A and FAS236 variants to the NCR53C9x core code. We probably
  still subsume some chip variants as ESP200 while in fact they are
  another variant which however shouldn't really matter as this will
  only happen when these chips are driven at 25MHz or less which implies
  not being able to run Fast-SCSI. [3]
- Add a workaround to the NCR53C9x interrupt handler which ignores the
  stray interrupt generated by FAS100A when doing path inquiry during
  boot and which otherwiese would trigger a panic.
- Add support for the 'esp' devices hanging off of a 'dma' or 'espdma'
  busses or which are companions of 'dma' devices to esp(4). In case of
  the variants that hang off of a DMA device this is a bit hackish as
  esp(4) then directly uses the softc of the respective parent to talk
  to the DMA engine. It might make sense to add an interface for this
  in order to implement this in a cleaner way however it's not yet clear
  how the requirements for the LANCE Ethernet controllers are and the
  hack works for now. [2]
  This effectively adds support for the onboard SCSI controller in
  Ultra 1 as well as most of the ESP-based SBus add-on cards to esp(4).
  With this the code for supporting the Performance Technologies SBS430
  SBus SCSI add-on cards is also largely in place the remaining bits
  were however omitted as it's unclear from the NetBSD how to couple
  the DMA engine and the core logic together for these cards.

Obtained from:	OpenBSD [1]
Obtained from:	NetBSD [2]
Clue from:	BSD/OS [3]
Reviewed by:	scottl (earlier version)
Tested with:	FSBE/S add-on card (FAS236), SSHA add-on card (ESP100A),
		Ultra 1 (onboard FAS100A), Ultra 2 (onboard FAS366)
2005-05-19 14:51:10 +00:00
Marius Strobl
410f3d914e - Add an IVAR for retrieving the interrupt group number of the parent Sbus
device and which also applies to the children. This is very usefull for
  drivers for the various subordinate busses so they don't need to fiddle
  with the OFW node of their parent themselves. As SBus busses hang of the
  nexus and we don't use the ofw_bus interface for nexus devices, yet, this
  would also require special knowledge about this in the drivers for the
  SBus children which these shouldn't need to have.
  This includes switching to use an unshifted IGN in the sc_ign member of
  the sbus(4) softc internally.
- For SBus child devices where there are variants that are actually split
  split into two SBus devices (as opposed to the first half of the device
  being a SBus device and the second half hanging off of the first one)
  like 'auxio' and 'SUNW,fdtwo' or 'dma' and 'esp' probe the SBus device
  which is a prerequisite to the driver attaching to the second one with
  a lower order. This saves us from dealing with different probe orders
  in the respective device drivers which generally is more hackish.
- Remove a stale comment about the 'specials' array above the attaching
  of the child devices. This is a remnant of the NetBSD/sparc origin of
  this code. There the 'specials' array is also used to probe certain
  devices which are prerequisites to others first. Why NetBSD soley
  relies on the devices having the expected order in the OFW tree on
  sparc64 isn't clear to me, as far as I can tell OFW doesn't guaranteed
  such things.
2005-05-19 14:47:31 +00:00
Marcel Moolenaar
aa1548fd85 Slightly reformat apb_alloc_resource() to create some horizontal space
for enhancements. Shorten apb_map_checkrange() to apb_checkrange() for
the same reason. No functional change.
2005-04-28 03:33:46 +00:00
David Xu
21fc316430 Change cpu_set_kse_upcall to more generic style, so we can reuse it
in other codes. Add cpu_set_user_tls, use it to tweak user register
and setup user TLS. I ever wanted to merge it into cpu_set_kse_upcall,
but since cpu_set_kse_upcall is also used by M:N threads which may
not need this feature, so I wrote a separated cpu_set_user_tls.
2005-04-23 02:32:32 +00:00
Marcel Moolenaar
ff7125a623 Add empty header (except of the multiple-inclusion protection) to
get hwpmc(4) to compile on this platform.
2005-04-20 18:44:53 +00:00
Warner Losh
06db52b609 Break out the definition of bus_space_{tag,handle}_t and a few other types
into _bus.h to help with name space polution from including all of bus.h.
In a few days, I'll commit changes to the MI code to take advantage of thse
sepration (after I've made sure that these changes don't break anything in
the main tree, I've tested in my trees, but you never know...).

Suggested by: bde (in 2002 or 2003 I think)
Reviewed in principle by: jhb
2005-04-18 21:45:34 +00:00
Marius Strobl
47b92dea0f Fix compilation when DEBUG is defined. 2005-04-18 02:34:22 +00:00
Marius Strobl
c64c7a0f7a Style and minor changes:
- Merge lsi64854.c rev. 1.25 from NetBSD: nuke trailing whitespace.
- Update NetBSD RCS IDs according to what was actually already merged.
- Remove dv_name from the lsi64854_softc and use device_printf() instead.
- Use __func__ instead of hardcoded function names in error messages.
- Use ulmin() instead of min() for comparing the DMA sizes as the values
  involved actually are represented by 64bit unsigned instead of 32bit
  unsigned. As far as I can't tell this doesn't make a difference in
  practice though.
- Some style(9) fixes (mainly indentation).
- Remove unnecessary braces.
2005-04-17 17:41:32 +00:00
Marius Strobl
b34639da21 Re-commit the following changes which were committed to these files
at their old location in sys/dev/esp after they were repo-copied to
sys/sparc64/sbus at rev. 1.1:

sys/dev/esp/lsi64854.c rev. 1.2
sys/dev/esp/lsi64854var.h rev. 1.2

Add some style(9) touch ups; style(9) states that new code should follow
these conventions and, well, this is a new driver.

Tested on:	i386, sparc64
Reviewed by:	scottl
2005-04-17 12:45:20 +00:00
Marius Strobl
743aeb6467 - Split the bus probe function into a bus probe and a bus attach function
with the attaching of the children done in the bus attach function like
  it's supposed to be.
- In the bus probe nomatch function print the resources of the children
  like it's done in the other sparc64 specific bus drivers.
- For the clock frequency IVAR use the per-child values and fall back to
  the bus default in case a child doesn't have the respective property
  instead of always using the bus default so a child driver doesn't need
  to obtain the per-child value itself (see also the commit message of
  sys/dev/esp/esp_sbus.c rev. 1.7).
- Add support for pass-through allocations. The comment preceding
  sbus_alloc_resource() wasn't quite correct, we need to support pass-
  through allocations for the 'espdma' and 'ledma' (pseudo-)busses which
  hang off of the SBus in Ultra 1 machines. There can also be actual
  bridges like the SBus-to-PCMCIA bridge on the SBus and the XBox (SBus
  extension box) probably also involves one.
2005-04-17 11:32:34 +00:00
Marius Strobl
b38701668b Some clean-up announced in rev. 1.31:
- Use auto-generated typedefs for the prototypes of the device interface
  functions.
- Style(9) fixes (mainly don't use function calls in initializers).
- Use __func__ instead of hardcoded function names in error messages.
- Try to make error messages sound uniform.
- Try to keep the code within 80 columns.
- Correct some typos.
- Correct some function declarations to match their prototypes.
- Remove unused headers, macros and variables.
- Remove a bzero() superfluous due to allocating with M_ZERO.
- Use FBSDID.
2005-04-17 11:28:41 +00:00
Marius Strobl
2f15864c85 - MFi386: sys/i386/i386/intr_machdep.c rev. 1.11
Don't use atomic ops to increment interrupt stats.
  On sparc64 this reduces delay until tick interrupts are service by 1/10th
  on average. In turn this reduces the clock drift caused by these delays
  so there's less drift which has to be compensated in tick_hardclock().
  This includes switching from atomically incrementing the global cnt.v_intr
  to the asm equivalent of PCPU_LAZY_INC(cnt.v_intr) in exception.S
- Correct some comments to match the registers actually used.
- Correct some format specifiers, interrupt levels passed in are u_int.
- Use FBSDID.

Ok'ed by:	jhb
2005-04-16 15:05:56 +00:00
Marius Strobl
197bb5864f Some changes to intr_execute_handlers():
- Fix NULL pointer dereferences caused when an ithread or a handler is
  NULL which happens when a stray interrupt triggers after the respective
  device interrupt was torn down.
- Remove the critical section around INTR_FAST handlers which actually
  was a nested critical section. Both tl0_intr() and tl1_intr() already
  enter a critical section for calling intr_execute_handlers().

MFC after:	3 days
2005-04-16 15:02:16 +00:00
Marius Strobl
50f046e614 - In sparc64_init() remove the call to tick_stop(). There's no need to
call tick_stop() again after tick_init() as tick interrupts already
  have been disabled as part of tick_init().
- In spinlock_enter() replace the magic value for PIL TICK with the
  respective macro.
- Use FBSDID.
2005-04-16 15:00:09 +00:00
Marius Strobl
7bed9b320b - Add a workaround for a bug in BlackBird CPUs (said to be part of the
SpitFire erratum #54) which can cause writes to the TICK_CMPR register
  to fail. This seems to fix the dying clocks problem reported by jhb@
  and kris@. [1]
- In tick_start() don't reset the tick counter of the boot processor to
  zero. It's initially reset in _start() and afterwards but _before_
  tick_start() is called on the BSP the APs synchronise with the tick
  counter of the BSP in mp_startup(). Resetting the tick counter of the
  BSP in tick_start() probably also was the cause of problems seen when
  using the CPU tick counter as timecounter on SMP machines.
  Not resetting the tick counter of the BSP in mp_startup() makes the
  tick counters and tick interrupts between the BSP and APs be pretty
  much in sync as it's supposed to be. This also means there's no longer
  a real reason to have separate tick_start() and tick_start_ap() so
  merge them and zap tick_start_ap(). This is also a first step in
  simplifying the interface to the tick counters in preparation to use
  alternate clock hardware where available.
- Switch to the algorithm used on FreeBSD/ia64 for updating the tick
  interrupt register and which compensates the clock drift caused by
  varying delays between when the tick interrupts actually trigger and
  when they are serviced. Not compensating the clock drift mainly hurts
  interactive performance especially when using WITNESS. [2]
  For further information about the algorithm also see the commit log
  of sys/ia64/ia64/interrupt.c rev. 1.38.
  On sparc64 the sysctls for monitoring the behaviour of the tick
  interrupts are machdep.tick.adjust_edges, machdep.tick.adjust_excess,
  machdep.tick.adjust_missed and machdep.tick.adjust_ticks.
- In tick_init() just use tick_stop() for stopping the tick interrupts
  until a proper handler is set up later. This also stops the system
  tick interrupt on USIII systems earlier.
- In tick_start() check for a rough upper limit of HZ.
- Some minor changes, e.g. use FBSDID, remove unused headers, etc.

Info obtained from:	Linux [1]
Ok'ed by:		marcel [2]
Additional testing by:	kris (earlier version of the workaround), jhb
X-MFC after:		3 days [1]
2005-04-16 14:57:38 +00:00