Add a make.conf DTC variable that control which DTC (Device Tree Compiler)
to use.
Reviewed by: bdrewery, imp
Differential Revision: https://reviews.freebsd.org/D9577
This fixes these cases which would rebuild every time:
make[6]: /usr/obj/usr/src/libexec/rtld-elf/tests/libpythagoras/.depend, 1: ignoring stale .depend for /usr/obj/usr/src/tmp/usr/tests/libexec/rtld-elf/libm.a
make[6]: /usr/obj/usr/src/lib/libxo/tests/encoder/.depend, 1: ignoring stale .depend for /usr/obj/usr/src/tmp/usr/tests/lib/libxo/libxo.a
make[7]: /usr/obj/usr/src/lib/libthr/tests/dlopen/dso/.depend, 1: ignoring stale .depend for /usr/obj/usr/src/tmp/usr/tests/lib/libthr/dlopen/libpthread.a
The problem is that some Makefiles will override LIBDIR to where they want
their library to install. bsd.libnames.mk will then use ${LIBDIR} to define
where *existing* libraries are. This then leads to looking for the
libraries in the *target* place rather than the *expected* place.
We may want to expand this (and all of the other *DIR variables in bsd.own.mk)
into something like what Ports has, a PREFIX and a LOCALBASE. PREFIX being
where things are being installed to and LOCALBASE being where they already are.
For now store the default expected LIBDIR into LIBDIR_BASE and use that for
library locations.
Reported by: sbruno
MFC after: 1 week
Sponsored by: Dell EMC Isilon
This uses a hack to get the CMD from the meta file rather than
.ERROR_CMD since bmake currently blanks the value for non-jobs
mode.
Reviewed by: sjg (indirectly)
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Zap trailing white and double spaces
Remove extra coma which is not required.
Bump date.
Reviewed by: gnn
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D11142
stack modules.
It adds support for mangling symbols exported by a module by prepending
a string to them. (This avoids overlapping symbols in the kernel linker.)
It allows the use of a macro as the module name in the DECLARE_MACRO()
and MACRO_VERSION() macros.
It allows the code to register stack aliases (e.g. both a generic name
["default"] and version-specific name ["default_10_3p1"]).
With these changes, it is trivial to compile TCP stack modules with
the name defined in the Makefile and to load multiple versions of the
same stack simultaneously. This functionality can be used to enable
side-by-side testing of an old and new version of the same TCP stack.
It also could support upgrading the TCP stack without a reboot.
Reviewed by: gnn, sjg (makefiles only)
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D11086
All manpages in base are now compatible with mandoc(1), all roff documentation
will be relocated in the doc tree. man(1) can now use groff from the ports tree
if it needs.
Also remove checknr(1) and colcrt(1) which are only useful with groff.
Approved by: (no objections on the mailing lists)
Normally META_MODE ignores host files for "meta mode" decisions on whether a
file should be rebuilt or not. This is because a simple installworld can
update timestamps and cause the next build to rebuild all host tools, when the
previous ones may not have any changes in the source tree. These tools are
normally still ABI compatible. They are only rebuilt if NO_META_IGNORE_HOST is
set from the workaround/hack in r301467.
One of the major problems with this is when a host tool has objects spread
across many revisions that have mixed-ABI. For example, if struct stat were to
change on the host, some objects for a tool may have different ideas of that
struct's definition. If just 1 source file were modified and rebuilt and
linked into the tool, then that toll will have mixed-ABI objects and crash.
This exact thing happened with the ino64 commit in r301467 followed by a
trivial update to libbfd in r318750. The resulting binary would crash in
buildworld.
Sponsored by: Dell EMC Isilon
See r301467 for more details on NO_META_IGNORE_HOST. Usually the full
list of host ignores should have no real impact on the host tools. The
headers however may reliably define what the ABI is for the host. It
may be useful to allow using the headers for the build but still not
caring about things like /bin/sh, /lib/libedit.so, etc.
Sponsored by: Dell EMC Isilon
Update the documentation to catch up with r273174, which renamed
getenv -> kern_getenv
setenv -> kern_setenv
unsetenv -> kern_unsetenv
Leave the old links in place to support finger memory.
MFC after: 3 days
Sponsored by: Dell EMC
The INSTALL_AS_USER option tells "install" to use the current
user name as the owner of the installed file. The "install"
command executed by the build is statically linked, so it does not
load nsswitch modules, such as nss_ldap.so, so it fails when
the user is only defined in such a database.
Fix it to use the current UID instead of user name. This works
for all users. I expect it is also slightly more efficient.
Reviewed by: sjg
MFC after: 3 days
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D10862
Move INSTALL_AS_USER into bsd.init.mk to maximize the chance that
it has final authority over fooOWN and fooGRP.
Reviewed by: sjg
MFC after: 3 days
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D10810
In FreeBSD we only use mdoc(7) format. A template is available as mdoc.template
The usage of man(7) format is discouraged and this file was driving people into
the front direction as a template to use.
roff documentation from the build.
Those documents will be added to the doc tree and distributed as PDF from
the documentation website. As they are valuable has history, but do not match
current FreeBSD
Further more, the ascii format we were using to distribute them is not really
accurate for such documents.
more details:
https://lists.freebsd.org/pipermail/freebsd-arch/2017-May/018211.html
bhyve was recently sandboxed with capsicum, and needs to be able to
control the CPU sets of its vcpu threads
Reviewed by: emaste, oshogbo, rwatson
MFC after: 2 weeks
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D10170
user (with -DNO_ROOT), resulted in warnings looking like these:
share/man/cat8:
user (9, 3819, not modified: Operation not permitted)
permissions (0755, 0700, modified)
The BSD.usr.mk is already taken care of in etc/Makefile.
Submitted by: Alex Richardson <alr48@cl.cam.ac.uk>
Reviewed by: bdrewery
MFC after: 1 month
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D9212
Extend the ino_t, dev_t, nlink_t types to 64-bit ints. Modify
struct dirent layout to add d_off, increase the size of d_fileno
to 64-bits, increase the size of d_namlen to 16-bits, and change
the required alignment. Increase struct statfs f_mntfromname[] and
f_mntonname[] array length MNAMELEN to 1024.
ABI breakage is mitigated by providing compatibility using versioned
symbols, ingenious use of the existing padding in structures, and
by employing other tricks. Unfortunately, not everything can be
fixed, especially outside the base system. For instance, third-party
APIs which pass struct stat around are broken in backward and
forward incompatible ways.
Kinfo sysctl MIBs ABI is changed in backward-compatible way, but
there is no general mechanism to handle other sysctl MIBS which
return structures where the layout has changed. It was considered
that the breakage is either in the management interfaces, where we
usually allow ABI slip, or is not important.
Struct xvnode changed layout, no compat shims are provided.
For struct xtty, dev_t tty device member was reduced to uint32_t.
It was decided that keeping ABI compat in this case is more useful
than reporting 64-bit dev_t, for the sake of pstat.
Update note: strictly follow the instructions in UPDATING. Build
and install the new kernel with COMPAT_FREEBSD11 option enabled,
then reboot, and only then install new world.
Credits: The 64-bit inode project, also known as ino64, started life
many years ago as a project by Gleb Kurtsou (gleb). Kirk McKusick
(mckusick) then picked up and updated the patch, and acted as a
flag-waver. Feedback, suggestions, and discussions were carried
by Ed Maste (emaste), John Baldwin (jhb), Jilles Tjoelker (jilles),
and Rick Macklem (rmacklem). Kris Moore (kris) performed an initial
ports investigation followed by an exp-run by Antoine Brodin (antoine).
Essential and all-embracing testing was done by Peter Holm (pho).
The heavy lifting of coordinating all these efforts and bringing the
project to completion were done by Konstantin Belousov (kib).
Sponsored by: The FreeBSD Foundation (emaste, kib)
Differential revision: https://reviews.freebsd.org/D10439
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
The ccr(4) driver supports use of the crypto accelerator engine on
Chelsio T6 NICs in "lookaside" mode via the opencrypto framework.
Currently, the driver supports AES-CBC, AES-CTR, AES-GCM, and AES-XTS
cipher algorithms as well as the SHA1-HMAC, SHA2-256-HMAC, SHA2-384-HMAC,
and SHA2-512-HMAC authentication algorithms. The driver also supports
chaining one of AES-CBC, AES-CTR, or AES-XTS with an authentication
algorithm for encrypt-then-authenticate operations.
Note that this driver is still under active development and testing and
may not yet be ready for production use. It does pass the tests in
tests/sys/opencrypto with the exception that the AES-GCM implementation
in the driver does not yet support requests with a zero byte payload.
To use this driver currently, the "uwire" configuration must be used
along with explicitly enabling support for lookaside crypto capabilities
in the cxgbe(4) driver. These can be done by setting the following
tunables before loading the cxgbe(4) driver:
hw.cxgbe.config_file=uwire
hw.cxgbe.cryptocaps_allowed=-1
MFC after: 1 month
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D10763
This includes NVMe device support and adds support for the following adapters:
SAS 3408
SAS 3416
SAS 3508
SAS 3516
SAS 3616
SAS 3708
SAS 3716
Reviewed by: ken, scottl, asomers, mav
Approved by: ken, scottl, mav
MFC after: 2 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D10095
This function permits a range of one scatter/gather list to be appended to
another sglist. This can be used to construct a scatter/gather list that
reorders or duplicates ranges from one or more existing scatter/gather
lists.
Sponsored by: Chelsio Communications
to the example, change the architectures to something more common,
and improve description of defaults for TARGET.
Reviewed by: bdrewery, ngie, imp (older revisions)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D10654
This allows for building the world against the already-created
host/sysroot environment. It is not overly useful outside of cases of
large-impact changes such as a testing a new compiler. It will
allow quickly getting back to an error in the target-phases of the
build where a new compiler is being used.
Sponsored by: Dell EMC Isilon
This could be seen in lib/libkvm/tests where kvm_test_common.o was
a common dependency, but one of the recursed progs had a special
CFLAGS+= -I that changed the build command. This would cause
all recursed builds to rebuild while fighting over the meta file
and object file.
Reported by: Mark Millard
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Also fix bad whitespace in sort_unique after r314809.
The parse_path syntax error came up in DIRDEPS_BUILD as the following
and emptied out all Makefile.depend files due to it:
# python share/mk/meta2deps.py
File "share/mk/meta2deps.py", line 538
rdir = os.path.realpath(dir)
^
IndentationError: unexpected indent
Sponsored by: Dell EMC Isilon
Attempt to catch up to the KPI changes from r292373, and perform
some other tidying while in the area.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D10579
This will help application developers simulate end of tape conditions.
To inject an error in sa0:
sysctl kern.cam.sa.0.inject_eom=1
This will return the next read or write request queued with 0 bytes
written. Any subsequent writes or reads will go along as usual.
This will also cause the early warning position flag to get set
for the next position query. So, 'mt status' will show the BPEW
(Beyond Programmable Early Warning) flag on the first query after
an error injection. After that, the position flags will be as they
are in the underlying tape drive.
Also, update the sa(4) man page to describe tape parameters,
which can be set via 'mt param'.
sys/cam/scsi/scsi_sa.c:
In saregister(), create the inject_eom sysctl variable.
In sastart(), check to see whether inject_eom is set. If
so, return the read or write with 0 bytes written to
indicate EOM. Set the set_pews_status flag so that we
fake PEWS status in the next position call for reads, and the
next 3 calls for writes. This allows the user to see the BPEW
flag one time via 'mt status'.
In sagetpos(), check the set_pews_status flag and fake
PEWS status and decrement the counter if it is set.
share/man/man4/sa.4:
Document the inject_eom sysctl variable.
Document all of the parameters currently supported via
'mt param'.
usr.bin/mt/mt.1:
Point the user to the sa(4) man page for more details on
supported parameters.
MFC after: 3 days
Sponsored by: Spectra Logic
Start with some words about linear address space and its layout, then
explain pointers models and ABIs, providing explanation to the
structure of the tables.
Reviewed by: emaste, imp
'Future-proof' cheri wording by: brooks
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D10596
After FreeBSD SVN revision 236814, the pass(4) driver changed from
only doing error recovery when the CAM_PASS_ERR_RECOVER flag was
set on a CCB to sometimes doing error recovery if the passed in
retry count was non-zero.
Error recovery would happen if two conditions were met:
1. The error recovery action was simply a retry. (Which is most
cases.)
2. The retry_count is non-zero. (Which happened a lot because of
cut-and-pasted code.)
This explains a bug I noticed in with camcontrol:
# camcontrol tur da34 -v
Unit is ready
# camcontrol reset da34
Reset of 1:172:0 was successful
At this point, there should be a Unit Attention:
# camcontrol tur da34 -v
Unit is ready
No Unit Attention.
Try it again:
# camcontrol reset da34
Reset of 1:172:0 was successful
Now set the retry_count to 0 for the TUR:
# camcontrol tur da34 -v -C 0
Unit is not ready
(pass42:mps1:0:172:0): TEST UNIT READY. CDB: 00 00 00 00 00 00
(pass42:mps1:0:172:0): CAM status: SCSI Status Error
(pass42:mps1:0:172:0): SCSI status: Check Condition
(pass42:mps1:0:172:0): SCSI sense: UNIT ATTENTION asc:29,2 (SCSI bus reset occurred)
(pass42:mps1:0:172:0): Field Replaceable Unit: 2
There is the unit attention. camcontrol(8) has a default
retry_count of 1, in case someone sets the -E flag without
setting -C.
The CAM_PASS_ERR_RECOVER behavior was only broken with the
CAMIOCOMMAND ioctl, which is the synchronous pass(4) API. It has
worked as intended (error recovery is only done when the flag
is set) in the asynchronous API (CAMIOQUEUE ioctl).
sys/cam/scsi/scsi_pass.c:
In passsendccb(), when calling cam_periph_runccb(), only
specify the error routine when CAM_PASS_ERR_RECOVER is set.
share/man/man4/pass.4:
Document that CAM_PASS_ERR_RECOVER is needed to enable
error recovery.
Reported by: Terry Kennedy <TERRY@glaver.org>
PR: kern/218572
MFC after: 1 week
Sponsored by: Spectra Logic
r316647 corrected the build of tblgen and libllvm as dependencies for
LLD so undo the temporary seat-belt.
We still want to extend the build infrastructure to automatically detect
the case where the host LLD can be used instead of building a bootstrap
LLD, and likely extend libllvmminimal to meet LLD's needs for cases
where the build includes LLD but not Clang.
Sponsored by: The FreeBSD Foundation
1. Wrap at <80 columns for readability when editing. Rewrap some lines
prematurely wrapped to better fit in <80 columns and not waste
vertical space.
2. Fix SEE ALSO sorting (sort by section first, then manpage name).
3. Tweak the compound device description slightly by adding soft stops
via commas.
MFC after: 1 week
Reported by: igor [3], manlint [2]
Sponsored by Dell EMC Isilon
When this option is enabled, only gdb and kgdb are installed to
/usr/libexec for use by crashinfo(8). Other bits of GDB such as
gdbserver and gdbtui are not installed. For this option to be
effective, GDB must be enabled.
Rework r317094 to re-enable GDB on all platforms but enable
GDB_LIBEXEC on platforms for which the GDB in ports is a superset of
functionality.
Reviewed by: emaste, kib
Suggested by: kib
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D10449
patm(4) devices.
Maintaining an address family and framework has real costs when we make
infrastructure improvements. In the case of NATM we support no devices
manufactured in the last 20 years and some will not even work in modern
motherboards (some newer devices that patm(4) could be updated to
support apparently exist, but we do not currently have support).
With this change, support remains for some netgraph modules that don't
require NATM support code. It is unclear if all these should remain,
though ng_atmllc certainly stands alone.
Note well: FreeBSD 11 supports NATM and will continue to do so until at
least September 30, 2021. Improvements to the code in FreeBSD 11 are
certainly welcome.
Reviewed by: philip
Approved by: harti
The GNU extension bits in the base system are old, no longer faithful
to upstream, and surprising in some regards. Switch to documenting
WITH_GNU_GREP_COMPAT and default GNU_GREP_COMPAT to OFF in the name of
good behavior.
According to http://www.regular-expressions.info, GNU extensions:
- Add missing quantifiers to BREs: \?, \+
- Add branching to BREs: \|
- Add backreferences (\1 through \9) to EREs
- Add \w, \W, \s, and \S corresponding to :alnum:, [^[:alnum:]],
:space:, and [^[:space:]] respectively
- Add word boundaries and anchors:
\b: word boundary
\B: not word boundary
\<: Strt of word
\>: End of word
\`: Start of subject string
\': End of subject string
These extensions are still available in /usr/bin/grep by default today,
as it is still GNU grep. As part of the bsdgrep migration plan these
extensions may be added to bsdgrep's regex support if necessary.
Submitted by: Kyle Evans <kevans91 at ksu.edu>
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D10114
Bugs have been found in the fastmatch implementation as used in bsdgrep.
Some have been fixed (r316495) while fixes for others are in review
(D10098).
In comparison with the fastmatch implementation, Kyle Evans found that:
- regex(3)'s performance with literal expressions offers a speed
improvement over fastmatch
- regex(3)'s performance, both with simple BREs and EREs, seems to be
comparable
The regex implementation was imported in r226035, and the commit message
reports:
This is a temporary solution until the whole regex library is
not replaced so that BSD grep development can continue and the
backported code gets some review and testing. This change only
improves scalability slightly, there is no big performance boost
yet but several minor bugs have been found and fixed.
Introduce a WITH_/WITHOUT_BSD_GREP_FASTMATCH knob to support testing
of both approaches.
PR: 175314, 194823
Submitted by: Kyle Evans <kevans91 at ksu.edu>
Reviewed by: bdrewery (in part)
Differential Revision: https://reviews.freebsd.org/D10282
rpcbind(8) with/without warmstart support.
The knob defaults to off to preserve POLA for the feature.
See rpcbind(8) for more details about the warmstart feature.
MFC after: 7 weeks
Relnotes: yes
Sponsored by: Dell EMC Isilon
These have no effect (and WITHOUT_GNU is documented as having no
effect). I intend to later introduce a WITHOUT_GPL knob to serve a
similar purpose as WITHOUT_GNU's previously documented intent, but with
a more accurate name. To avoid confusion over the transition though just
remove the existing, nonfunctional ones.
Note that this commit also adds the default riscv settings for all
options since riscv was added to 'make targets' since the last time
this was generated.
Reminded by: emaste
GDB in ports contains all of the functionality as GDB in base
(including kgdb) for these platforms along with additional
functionality. In-tree GDB remains enabled on ARM and sparc64.
GDB in ports does not currently support kernel debugging on arm,
and ports GDB for sparc64 has not been tested (though it does
include sparc64 support).
Reviewed by: bdrewery, emaste, imp
Relnotes: yes
Sponsored by: DARPA / AFRL
Differential Revision: https://reviews.freebsd.org/D10399
Adds:
-E: Use UEFI mode
-f: path to UEFI firmware image (default: path to uefi-edk2-bhyve package)
-F: UEFI framebuffer size (default: w=1024,h=768)
-L: IP to listen for VNC connections on (default: 127.0.0.1)
-P: Port to listen for VNC connections on (default: 5900)
-T: Enable tablnet device (for VNC)
-v: Wait for VNC client before booting VM
Submitted by: Shawn Webb <shawn.webb@hardenedbsd.org>
MFC after: 2 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D10378
Add WITH_LLD_BOOTSTRAP and WITHOUT_LLD_BOOTSTRAP knobs, similar to the
Clang bootstrap knobs.
Reviewed by: dim
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D10249
GNU GCC does does recognise it as a valid option and we already
use -mgeneral-regs-only that has the desired effect.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D10306
Specifically, set '-mabi=XX' in AFLAGS, CFLAGS, and LDFLAGS. This permits
building MIPS worlds and binaries with a toolchain whose default output
does not match the desired TARGET_ARCH.
_LDFLAGS (which is used with LD instead of with CC) required an update as
LD does not accept the -mabi flags (so they must be stripped from LDFLAGS
when generating _LDFLAGS). For bare uses of LD (rather than linking via
CC), the desired ABI must be set by setting an explicit linker emulation
as done in r316514 for kernels and kernel modules.
Reviewed by: imp
Sponsored by: DARPA / AFRL
Differential Revision: https://reviews.freebsd.org/D10085
This should no longer be necessary after r316620 as all places that
use ACFLAGS should already be using CFLAGS.
Reviewed by: imp
Sponsored by: DARPA / AFRL
Differential Revision: https://reviews.freebsd.org/D10085
FDC_DEBUG is not referenced in any c or header files but traces of it
still remain in other files.
PR: 105608
Reported by: Eugene Grosbein <ports AT grosbein DOT net>
Reviewed by: imp
Approved by: bcr (mentor)
MFC after: 7 days
Differential Revision: https://reviews.freebsd.org/D10303
In a cross-build, the build-tools are native host binaries. We do not
want to rebuild them when building for the target. Bmake previously
did not support checking .NOMETA on an existing target, so .NOMETA_CMP
was used here. However, .NOMETA_CMP still triggers meta mode conditions
if the number of commands or the command changes. In r312467 the paths
to build ncurses files were modified and thus triggered meta mode to
rebuild the build tools (make_keys, make_hash) in ncurses during the
target build. Bmake 20160604 committed in r301462 changed .NOMETA to
also skip meta mode logic for an existing .meta file as well, thus it
is now the proper fix here.
I explored moving the build-tools output to WORLDTMP/tools with
relatively good success, but have concerns that doing so would be
problematic for downstream vendors who use LOCAL_TOOL_DIRS and
expect the tools to be in current OBJDIR for the target. It also
adds more complexity into finding the tools during target build
and handling of where they are for rescue/rescue and
mkcsmapper_static/mkesdb_static which should really not be connected in
build-tools anyway.
MFC after: 2 weeks
Reported by: many
Sponsored by: Dell EMC Isilon
- move sbuf_bcopyin(9) and sbuf_copyin(9) near sbuf_new_for_sysctl(9), as
all three functions are kernel-only APIs.
- add #ifdef _KERNEL around sbuf_*copyin and sbuf_new_for_sysctl(9) to
make it visually clear that they are kernel-only APIs.
MFC after: 2 months
Sponsored by: Dell EMC Isilon
This shortens the column count on many lines considerably.
While here, add "(void)" to sbuf_new_auto(3) for consistency with style(9)
recommendations.
MFC after: 2 months
Sponsored by: Dell EMC Isilon
using "-width". The http://mdocml.bsd.lv/mdoc/details/width.html
says: "Do not use macros in the argument specifying the width,
that's not portable. While GNU troff can handle it, mandoc cannot."
The same problem seems to exist in many other man pages.
Reviewed by: bapt, vangyzen
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D10238
Multiple periodic scripts sleep for a random amount of time in order to
mitigate the thundering herd problem. This is bad, because the sum of
multiple uniformly distributed random variables approaches a normal
distribution, so the problem isn't mitigated as effectively as it would be
with a single sleep.
This change creates a single configurable anticongestion sleep. periodic
will only sleep if at least one script requires it, and it will never sleep
more than once per invocation. It also won't sleep if periodic was run
interactively, fixing an unrelated longstanding bug.
PR: 217055
PR: 210188
Reviewed by: cy
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D10211
The goal of this work is to remove the explicit dependency for ctl(4)
on iscsi(4), so end-users without iscsi(4) support in the kernel can
use ctl(4) for its other functions.
This allows those without iscsi(4) support built into the kernel to use
ctl(4) as a test mechanism. As a sidenote, this was possible around the
10.0-RELEASE period, but made impossible for end-users without iscsi(4)
between 10.0-RELEASE and 11.0-RELEASE.
Automatically load cfiscsi(4) from ctladm(8) and ctld(8) for backwards
compatibility with previously releases. The automatic loading feature is
compiled into the beforementioned tools if MK_ISCSI == yes when building
world.
Add a manpage for cfiscsi(4) and refer to it in ctl(4).
Differential Revision: D10099
MFC after: 2 months
Relnotes: yes
Reviewed by: mav, trasz
Sponsored by: Dell EMC Isilon
igor:
- Fix typos.
- Delete trailing whitespace.
manlint:
- Use .Fo/.Fc/.Fa when describing functions.
- Use .Xr.
- Fill in SEE ALSO section.
- Fix .Dt use: the section was specified incorrectly and the name
had a lowercase character.
- Continue new sentences on new lines.
Miscellaneous:
- Remove unnecessary quotes around "SEE ALSO" section headers.
- Sprinkle .Dv use in spots with constants.
Reported by: igor, make manlint
Sponsored by: Dell EMC Isilon
Add missing section number when referring to PCI_IOV_*INIT(9) with .Xr
from the other corresponding manpage.
MFC after: 1 week
Reported by: make manlint
Sponsored by: Dell EMC Isilon
- Expand a contraction [1].
- Add a missing section number when referring to uma(9) with .Xr .
MFC after: 1 week
Reported by: igor [1], make manlint [2]
Sponsored by: Dell EMC Isilon
- Use `Em` with `.It` macro when referring to other libraries, instead of
`Xr`.
- Use `.Em` instead of `.Xr` when referring to libraries.
- Remove commented out lines.
MFC after: 1 month
Reported by: make manlint
Sponsored by: Dell EMC Isilon
tests(7) should be grouped in the man section 7 group, not the section 8 group.
MFC after: 1 week
Reported by: make manlint
Sponsored by: Dell EMC Isilon
Describe (briefly) how to compile the filesystem into the kernel and
load as a module.
Reference cd9660(5) in mount(8) and mount_cd9660(8).
MFC after: 1 month
Sponsored by: Dell EMC Isilon
- Delete trailing whitespace
- Sort SEE ALSO order: mmap(2)'s Xr should come before nmount(2)'s Xr.
MFC after: 1 week
Reported by: make manlint
Sponsored by: Dell EMC Isilon
Document work done by mmacy/sbruno to merge the two drivers together
and convert em(4) to the iflib framework.
X-MFC with: r311849
Sponsored by: Dell EMC Isilon
man(1) has some logic to use two spaces after a full stop, which is
useful for spotting sentence breaks in monospace fonts. However,
this logic is very simple, treating almost all '.' characters as
end-of-sentence markers, unless followed by certain other
characters. For example, '.,' is not end-of-sentence, and neither
is ".) ", but ".)" at the end of a line triggers the sentence-end
detection.
Apply a zero-width space to a few instances of this in share/man,
and also supply a missing full stop for an instance that occurred at
the end of a sentence.
Leave untouched several instances that are at the end of a sentence
or list element.
Reported by: 0mp (ieee80211.9)
Add a clock_nanosleep() syscall, as specified by POSIX.
Make nanosleep() a wrapper around it.
Attach the clock_nanosleep test from NetBSD. Adjust it for the
FreeBSD behavior of updating rmtp only when interrupted by a signal.
I believe this to be POSIX-compliant, since POSIX mentions the rmtp
parameter only in the paragraph about EINTR. This is also what
Linux does. (NetBSD updates rmtp unconditionally.)
Copy the whole nanosleep.2 man page from NetBSD because it is complete
and closely resembles the POSIX description. Edit, polish, and reword it
a bit, being sure to keep any relevant text from the FreeBSD page.
Reviewed by: kib, ngie, jilles
MFC after: 3 weeks
Relnotes: yes
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D10020
By default bmake does not allow meta mode to work unless an OBJDIR is
present. It allows this if curdirok= is set with a value not starting
with [0NnFf], but usually it is "yes".
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
I moved this branch from github to a private server, and pulled from the
wrong one when committing r315280, so I failed to include two recent commits.
Thankfully, they were only cosmetic and were included in the review.
Specifically:
Add documentation, polish comments, and improve style(9).
Tested by: pho (r315280)
MFC after: 2 weeks
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D9791
The latter set of manpages directly consume bsd.man.mk, so the bsd.man.mk
behavior should be the source of truth for underlying behavior, whereas
the other manpage fragment descriptions should document how they tweak
the variable behavior, if at all (bsd.prog.mk does tweak the default
value, as noted in its description)
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Unfortunately they will have different integer value due to Linux value being already assigned in FreeBSD.
The patch is similar to IP_RECVDSTADDR but also provides the destination port value to the application.
This allows/improves implementation of transparent proxies on UDP sockets due to having the whole information on forwarded packets.
Reviewed by: adrian, aw
Approved by: ae (mentor)
Sponsored by: rsync.net
Differential Revision: D9235
Promote Peter Grehan to a brother of day1 by
adding Peter Grehan (grehan) as my mentor.
Reviewed by: gjb
Approved by: grehan
Verified by: dot to make sure it produces output and no cycles occur
This interface has no in-tree consumers and has been more or less
non-functional for several releases.
Remove manpage note that the procfs special file 'mem' is grouped to
kmem. This hasn't been true since r81107.
Remove procfs' README file. It is an out of date duplication of the manpage
(quoth the README: "since the bsd kernel is single-processor...").
Reviewed by: vangyzen, bcr (manpage)
Approved by: des (procfs maintainer), vangyzen (mentor)
Differential Revision: https://reviews.freebsd.org/D9802
- Delete empty Li macro uses [1]. This removes some spaces between
the optional command/subcommand arguments.
- Attempt to clarify "show lock" subcommand by being more
terse/direct. This addresses an issue with a contraction [2].
MFC after: 1 week
Reported by: make manlint [1], igor [2]
Reviewed by: wblock
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D9858
Note that makeman's use of 'make showconfig' interacts poorly with
the COMPILER_FEATURES test in share/mk/src.opts.mk, because it tests the
host compiler, not the bootstrap compiler that will actually be used to
build world. This causes it to report that Clang is enabled by default
on MIPS and PowerPC.
For example:
% make TARGET_ARCH=mips64 showconfig | grep CLANG
MK_CLANG = yes
MK_CLANG_BOOTSTRAP = no
MK_CLANG_EXTRAS = no
MK_CLANG_FULL = yes
MK_CLANG_IS_CC = no
I am committing this version anyway to avoid extraneous diffs in
src.conf.5 after every other WITH_/WITHOUT_FOO change.
In addition, we intend to switch to a C++11 compiler for all archs for
12.0 (either by fixing Clang for those archs, or by requiring an
external toolchain), and then src.conf.5 will be correct.
Sponsored by: The FreeBSD Foundation
sbuf_hexdump(9) should be linked to sbuf(9), not hexdump(3). Another
review will be posted to deduplicate the sbuf_hexdump reference in
in hexdump(3) or at the very least make the information less duplicative.
MFC after: 1 week
X-MFC with: r313437
Sponsored by: Dell EMC Isilon
- Add missing sections for .Xr references.
- Replace .br with .Pp (the former macro is deprecated).
- Use the .Sx (section reference) macro when referring to
LIBRARIES, not the .Xr (cross-reference) macro.
- Add commas after "e.g." and "i.e." [*].
Bump .Dd for the change
Approved by: luigi
MFC after: 1 week
Reported by: igor [*], make manlint
Sponsored by: Dell EMC Isilon
Differential Revision: D9859
Move cxgbetool from tools/tools to usr.sbin. Compile and install it on
platforms where cxgbe(4) is built by default. Knobs (WITH_CXGBETOOL and
WITHOUT_CXGBETOOL) have been added so that the user can override the
default setting.
Reviewed by: ngie@, gnn@, bdrewery@
MFC after: 1 month
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D9854
4.0.0 (branches/release_40 296509). The release will follow soon.
Please note that from 3.5.0 onwards, clang, llvm and lldb require C++11
support to build; see UPDATING for more information.
Also note that as of 4.0.0, lld should be able to link the base system
on amd64 and aarch64. See the WITH_LLD_IS_LLD setting in src.conf(5).
Though please be aware that this is work in progress.
Release notes for llvm, clang and lld will be available here:
<http://releases.llvm.org/4.0.0/docs/ReleaseNotes.html>
<http://releases.llvm.org/4.0.0/tools/clang/docs/ReleaseNotes.html>
<http://releases.llvm.org/4.0.0/tools/lld/docs/ReleaseNotes.html>
Thanks to Ed Maste, Jan Beich, Antoine Brodin and Eric Fiselier for
their help.
Relnotes: yes
Exp-run: antoine
PR: 215969, 216008
MFC after: 1 month
- Replace the "following lines" with more terse phrases.
- Use .Lk for the mellanox URL.
- Reword the SUPPORT section so it's less wordy.
The DESCRIPTION section suggestions are still outstanding; improving
the section requires additional review to make sure the nuance/message
is correct per the original intent.
Bump .Dd for the change
Submitted by: wblock
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D9241
The driver manpage for wpifw(4) is missing, but will be added soon. This
fixes the other 2 .Xr calls lacking sections to match the 3rd,
syntactically correct, reference in the SEE ALSO section.
MFC after: 1 week
Reported by: make manlint
Sponsored by: Dell EMC Isilon
Now the section width is set appropriately per the BIO_DELETE
parameter being described.
Reported by: make manlint
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.
Submitted by: Jan Schaumann <jschauma@stevens.edu>
Pull Request: https://github.com/freebsd/freebsd/pull/96
to stdout in the non-kernel case and to the console+log
in the kernel case. For the kernel case it hooks the
putbuf() machinery underneath printf(9) so that the buffer
is written completely atomically and without a copy into
another temporary buffer. This is useful for fixing
compound console/log messages that become broken and
interleaved when multiple threads are competing for the
console.
Reviewed by: ken, imp
Sponsored by: Netflix
This function allows the caller to specify the reference clock
and choose between absolute and relative mode. In relative mode,
the remaining time can be returned.
The API is similar to clock_nanosleep(3). Thanks to Ed Schouten
for that suggestion.
While I'm here, reduce the sleep time in the semaphore "child"
test to greatly reduce its runtime. Also add a reasonable timeout.
Reviewed by: ed (userland)
MFC after: 2 weeks
Relnotes: yes
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D9656
In the Kyua era, it's no longer necessary to set PJDFSTEST_TEST_PATH. Just
use TMPDIR instead.
Reviewed by: ngie
MFC after: 3 weeks
Relnotes: yes
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D9340
for USB OTG-capable hardware to implement device side of USB
Mass Storage, ie pretend it's a flash drive. It's configured
in the same way as other CTL frontends, using ctladm(8)
or ctld(8). Differently from usfs(4), all the configuration
can be done without rebuilding the kernel.
Testing and review is welcome. Right now I'm still moving,
and I don't have access to my test environment, so I'm somewhat
reluctant to making larger changes to this code; on the other
hand I don't want to let it sit on Phab until my testing setup
is back, because I want to get it into 11.1-RELEASE.
Reviewed by: emaste (cursory), wblock (man page)
MFC after: 2 weeks
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8787
compile options. Remove doxygen pointers to now deleted files. Remove
EISA and VME as examples in bus_space.9.
Retained EISA mode code for IO PIC and MPTABLES because that's not
EISA bus, per se, and some people have abused EISA to mean "EISA-like
behavior as opposed to ISA" rather than using it for EISA add-in
cards.
Relnotes: yes
VesaLocalBus or EISA. Internally, EISA and ISA are handled the same,
with VL being handled slightly differently. To avoid too much code
churn, retain the EISA name, despite it being used only for ISA
bus. When it is on the ISA bus, weird gymnastics are required with
EISA-space address accesses as well. Remove known models from the ahc
man page. Remove ahc_eisa module.
page. Remove comment about EISA dual channel card. Remove trivial
references in advlib to avoid false positives with grep. Remove stray
MCA reference not worth a seperate commit.
still relevant (ISA cards can still be in EISA mode, and we're still
ignoring those in the identify routine). Notes about cards in EISA
mode have been left in the manual since they aren't relevant to EISA
support, but instruct how to properly configure an ISA card in a mode
when it is in a ISA bus slot.
support. Fix a comment block that's shared with both vx and ep. Remove
obsolete refernce to statically compiling a kernel with a fixed number
of vx devices. Have not removed EISA from the title of the document
the register definitions were originally derived from (though no doubt
more recent docments were also consulted).
machines, only a few 486 machines that used it, and those haven't had
enough memory to run FreeBSD for quite some time (often limited to
16MB).
Not to be confused with the Machine Check Architecture, which is still
very much alive and used (and untouched by this commit).
No Objection From: arch@
If WITH_LLD is disabled LLD is not built and cannot be installed as
/usr/bin/ld, so disable WITH_LLD_IS_LD.
Currently we do not compare the LLD host/in-tree version and LLD
requires the LLVM libraries to be built, so force WITH_SYSTEM_COMPILER
off when WITH_LLD_IS_LD is set.
The logic for bootstrapping LLD requires some tidying later. We should
be able to detect that the host linker is the same version and avoid
building LLD in the same way that WITH_SYSTEM_COMPILER handles Clang.
We also may be able to extend libllvmminimal to meet LLD's needs. For
now this change unbreaks buildworld with default settings except for
WITH_LLD_IS_LD.
Reported by: Shawn Webb
Reviewed by: bdrewery
Tested by: Shawn Webb
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D9487
Small summary
-------------
o Almost all IPsec releated code was moved into sys/netipsec.
o New kernel modules added: ipsec.ko and tcpmd5.ko. New kernel
option IPSEC_SUPPORT added. It enables support for loading
and unloading of ipsec.ko and tcpmd5.ko kernel modules.
o IPSEC_NAT_T option was removed. Now NAT-T support is enabled by
default. The UDP_ENCAP_ESPINUDP_NON_IKE encapsulation type
support was removed. Added TCP/UDP checksum handling for
inbound packets that were decapsulated by transport mode SAs.
setkey(8) modified to show run-time NAT-T configuration of SA.
o New network pseudo interface if_ipsec(4) added. For now it is
build as part of ipsec.ko module (or with IPSEC kernel).
It implements IPsec virtual tunnels to create route-based VPNs.
o The network stack now invokes IPsec functions using special
methods. The only one header file <netipsec/ipsec_support.h>
should be included to declare all the needed things to work
with IPsec.
o All IPsec protocols handlers (ESP/AH/IPCOMP protosw) were removed.
Now these protocols are handled directly via IPsec methods.
o TCP_SIGNATURE support was reworked to be more close to RFC.
o PF_KEY SADB was reworked:
- now all security associations stored in the single SPI namespace,
and all SAs MUST have unique SPI.
- several hash tables added to speed up lookups in SADB.
- SADB now uses rmlock to protect access, and concurrent threads
can do SA lookups in the same time.
- many PF_KEY message handlers were reworked to reflect changes
in SADB.
- SADB_UPDATE message was extended to support new PF_KEY headers:
SADB_X_EXT_NEW_ADDRESS_SRC and SADB_X_EXT_NEW_ADDRESS_DST. They
can be used by IKE daemon to change SA addresses.
o ipsecrequest and secpolicy structures were cardinally changed to
avoid locking protection for ipsecrequest. Now we support
only limited number (4) of bundled SAs, but they are supported
for both INET and INET6.
o INPCB security policy cache was introduced. Each PCB now caches
used security policies to avoid SP lookup for each packet.
o For inbound security policies added the mode, when the kernel does
check for full history of applied IPsec transforms.
o References counting rules for security policies and security
associations were changed. The proper SA locking added into xform
code.
o xform code was also changed. Now it is possible to unregister xforms.
tdb_xxx structures were changed and renamed to reflect changes in
SADB/SPDB, and changed rules for locking and refcounting.
Reviewed by: gnn, wblock
Obtained from: Yandex LLC
Relnotes: yes
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D9352
'-n' to tell the driver to create _up to_ 'n' queues if enough cores are
available. For example, setting hw.cxgbe.nrxq10g="-32" will result in
16 queues if the system has 16 cores, 32 if it has 32.
There is no change in the default number of queues of any type.
MFC after: 1 week
Sponsored by: Chelsio Communications
Document AF_UNIX control messages in unix(4) only, not split between unix(4)
and recv(2).
Also, warn about LOCAL_CREDS effective uid/gid fields, since the write could
be from a setuid or setgid program (with the explicit SCM_CREDS and
LOCAL_PEERCRED, the credentials are read at such a time that it can be
assumed that the process intends for them to be used in this context).
Reviewed by: wblock
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D9298
With this change LLD will be built on the same set of architectures that
use Clang as /usr/bin/cc. It is not yet fully functional as a system
linker for i386 and arm, but is ready for further testing and
investigation.
Recent versions of Clang are becoming usable for non-x86 non-arm FreeBSD
architectures. If the compiler is capable of building Clang, do so in
order to facilitate further testing.
Reviewed by: dim, imp
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8267
Provide more useful explanation of features and quirks.
Reviewed by: emaste, vangyzen
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D9211
This manpage isn't differentiated from mlx4en except where necessary,
replacing eth/ETH with ib/IB.
Eventually the manpages will be split and the common bits be placed
in a manpage named "mlx4.4".
MFC after: 3 weeks
Reviewed by: hselasky
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D9241
