SOCK_NONBLOCK flags, that allow to save fcntl() calls.
Implement a variation of the socket() syscall which takes a flags
in addition to the type argument.
Approved by: kib (mentor)
MFC after: 1 month
Temporarily use 0 for pid member as the FreeBSD does not cache remote
UNIX domain socket peer pid.
PR: kern/102956
Reviewed by: rwatson
Approved by: kib (mentor)
MFC after: 1 month
to 2.4.0, as it has appeared in the 2.4.0-rc7 first time.
Being exported, AT_CLKTCK is returned by sysconf(_SC_CLK_TCK),
glibc falls back to the hard-coded CLK_TCK value when aux entry
is not present.
Glibc versions prior to 2.2.1 always use hard-coded CLK_TCK value.
For older applications/libc's which depends on hard-coded CLK_TCK
value user should set compat.linux.osrelease less than 2.4.0.
Approved by: kib (mentor)
designation of the emulated kernel version.
linux_kernver() returns integer value formatted as 'VVVMMMIII' where
VVV - version, MMM - major revision, III - minor revision.
Approved by: kib (mentor)
The frequency of the statistics clock is given by stathz.
Use stathz if it is available, otherwise use hz.
Pointed out by: bde
Approved by: kib (mentor)
I really don't want any pieces of code to include ioctl_compat.h, so let
the ibcs2 and svr4 compat leave sgtty alone. If they want to support
sgtty, they should emulate it on top of termios, not sgtty.
The code has been marked with BURN_BRIDGES for a long time. ibcs2 and
svr4 are not really popular pieces of code anyway.
virtualized instances of hostname and domainname, as well as a new top-level
virtualization struct vimage, which holds pointers to struct vnet and struct
vprocg. Struct vprocg is likely to become replaced in the near future with
a new jail management API import.
As a consequence of this change, change struct ucred to point to a struct
vimage, instead of directly pointing to a vnet.
Merge vnet / vimage / ucred refcounting infrastructure from p4 / vimage
branch.
Permit kldload / kldunload operations to be executed only from the default
vimage context.
This change should have no functional impact on nooptions VIMAGE kernel
builds.
Reviewed by: bz
Approved by: julian (mentor)
OSD-based jail extensions. This allows the Linux MIB to accessed via
jail_set and jail_get, and serves as a demonstration of adding jail support
to a module.
Reviewed by: dchagin, kib
Approved by: bz (mentor)
which is available for Glibc as sysconf(_SC_CLK_TCK). If AT_CLKTCK entry is
not exported, Glibc uses 100.
linux_times() shall use the value that is exported to user space.
Pointyhat to: dchagin
PR: kern/134251
Approved by: kib (mentor)
MFC after: 2 weeks
Use the protocol family constants for the domain argument validation.
Return EAFNOSUPPORT in case when the incorrect domain argument
is specified.
Return EPROTONOSUPPORT instead of passing values that are not 0
to the BSD layer.
Suggested by: rwatson
Approved by: kib (mentor)
MFC after: 1 month
Old implemention used Giant to protect the kernel data structures,
but at the same time called malloc(M_WAITOK), that could cause the
calling thread to sleep and lost Giant protection. User-visible
result was the missed wakeup.
New implementation uses one sx lock per futex. The sx protects
the futex structures and allows to sleep while copyin or copyout
are performed.
Unlike linux, we return EINVAL when FUTEX_CMP_REQUEUE operation
is requested and either caller specified futexes are equial or
second futex already exists. This is acceptable since the situation
can only occur from the application error, and glibc falls back to
old FUTEX_WAKE operation when FUTEX_CMP_REQUEUE returns an error.
Approved by: kib (mentor)
MFC after: 1 month
interface as nmount(2). Three new system calls are added:
* jail_set, to create jails and change the parameters of existing jails.
This replaces jail(2).
* jail_get, to read the parameters of existing jails. This replaces the
security.jail.list sysctl.
* jail_remove to kill off a jail's processes and remove the jail.
Most jail parameters may now be changed after creation, and jails may be
set to exist without any attached processes. The current jail(2) system
call still exists, though it is now a stub to jail_set(2).
Approved by: bz (mentor)
rearrange / replace / adjust several INIT_VNET_* initializer
macros, all of which currently resolve to whitespace.
Reviewed by: bz (an older version of the patch)
Approved by: julian (mentor)
Glibc does not use this operation since 2.3.3 version (Jun 2004),
as it is racy and replaced by FUTEX_CMP_REQUEUE operation.
Glibc versions prior to 2.3.3 fall back to FUTEX_WAKE when
FUTEX_REQUEUE returned EINVAL.
Any application directly using FUTEX_REQUEUE without return
value checking are definitely broken.
Limit quantity of messages per process about unsupported
operation.
Approved by: kib (mentor)
MFC after: 1 month
- make usb2_power_mask_t 16-bit
- remove "usb2_config_sub" structure from "usb2_config". To compensate for this
"usb2_config" has a new field called "usb_mode" which select for which mode
the current xfer entry is active. Options are: a) Device mode only b) Host
mode only (default-by-zero) c) Both modes. This change was scripted using
the following sed script: "s/\.mh\././g".
- the standard packet size table in "usb_transfer.c" is now a function, hence
the code for the function uses less memory than the table itself.
Submitted by: Hans Petter Selasky
1) Move the new field (brand_note) to the end of the Brandinfo structure.
2) Add a new flag BI_BRAND_NOTE that indicates that the brand_note pointer
is valid.
3) Use the brand_note field if the flag BI_BRAND_NOTE is set and as old
modules won't have the flag set, so the new field brand_note would be
ignored.
Suggested by: jhb
Reviewed by: jhb
Approved by: kib (mentor)
MFC after: 6 days
the arguments translations. Provide ABI-compatible definition of the
struct i386_ldt_args for freebsd32 compat layer.
In collaboration with: pho
Reviewed by: jhb
To keep these structures ABI-compatible, half the size of r_trapno,
r_err, mc_trapno, mc_flags.
Add fsbase and gsbase to mcontext on both amd64 and i386.
Add flags to amd64 mcontext to indicate that it contains valid segments
or bases.
In collaboration with: pho
Discussed with: peter
Reviewed by: jhb
It's quite strange that nobody reported this issue before. It turns out
functions like ttyname(), ptsname() and fdevname() don't work in
compat32. This means it't not even possible to run applications like
script(1) inside a 32-bit FreeBSD jail.
Fix this by converting 32-bit fiodgname_arg structures to their 64-bit
equivalent.
Reported by: kris
Tested by: kris
via the Linux tool.
- Add Linux shim to ipmi(4)
- Create a partitions file to linprocfs to make Linux fdisk see
disks. This file is dynamic so we can see disks come and go.
- Convert msdosfs to vfat in mtab since Linux uses that for
msdosfs.
- In the Linux mount path convert vfat passed in to msdosfs
so Linux mount works on FreeBSD. Note that tasting works
so that if da0 is a msdos file system
/compat/linux/bin/mount /dev/da0 /mnt
works.
- fix a 64it bug for l_off_t.
Grabing sh, mount, fdisk, df from Linux, creating a symlink of mtab to
/compat/linux/etc/mtab and then some careful unpacking of the Linux bmc
update tool and hacking makes it work on newer Dell boxes. Note, probably
if you can't figure out how to do this, then you probably shouldn't be
doing it :-)
or URB_FUNCTION_CLASS_xxx with HAL preemption lock that means it's
non-sleepable during USB requests though usb2_do_request() requires a
sleep so it needs to send queries to the default pipe without those
interfaces to avoid sleep.
whatever the IRP flag is because some drivers (eg. RTL8187L NDIS driver)
call IoCompleteRequest() without setting flags. It will prevent waiting
a event forever at attach.
".note.ABI-tag" section.
The search order of a brand is changed, now first of all the
".note.ABI-tag" is looked through.
Move code which fetch osreldate for ELF binary to check_note() handler.
PR: 118473
Approved by: kib (mentor)
Based on the HAL preemption lock there is a problem on SMP machines
and causes a panic.
o When a device detached the current tactic to detach NDIS USB driver is
to call SURPRISE_REMOVED event. So it don't need to call
ndis_halt_nic() again. This fixes some page faults when some drivers
work abnormal.
o it assumes now that URB_FUNCTION_BULK_OR_INTERRUPT_TRANSFER is in
DISPATCH_LEVEL (non-sleepable) and as further work
URB_FUNCTION_VENDOR_XXX and URB_FUNCTION_CLASS_XXX should be.
Reviewed by: Hans Petter Selasky <hselasky_at_freebsd.org>
Tested by: Paul B. Mahol <onemda_at_gmail.com>
o implement URB_FUNCTION_ABORT_PIPE handling.
o remove unused code related with canceling the timer list for USB
drivers.
o whitespace cleanup and style(9)
Obtained from: hps's original patch
ABIs:
- Store the FPU initial control word in the pcb for each thread.
- When first using the FPU, load the initial control word after restoring
the clean state if it is not the standard control word.
- Provide a correct control word for Linux/i386 binaries under
FreeBSD/amd64.
- Adjust the control word returned for fpugetregs()/npxgetregs() when a
thread hasn't used the FPU yet to reflect the real initial control
word for the current ABI.
- The Linux/i386 ABI for FreeBSD/i386 now properly sets the right control
word instead of trashing whatever the current state of the FPU is.
Reviewed by: bde
are used by glibc. This silents the message "2.4+ kernel w/o ELF notes?"
from some programs at start, among them are top and pkill.
Do the assignment of the vector entries in elf_linux_fixup()
as it is done in glibc.
Fix some minor style issues.
Submitted by: Marcin Cieslak <saper at SYSTEM PL>
Approved by: kib (mentor)
MFC after: 1 week
vfsopt and the vfs_buildopts function public, and add some new fields
to struct vfsopt (pos and seen), and new functions vfs_getopt_pos and
vfs_opterror.
Further extend the interface to allow reading options from the kernel
in addition to sending them to the kernel, with vfs_setopt and related
functions.
While this allows the "name=value" option interface to be used for more
than just FS mounts (planned use is for jails), it retains the current
"vfsopt" name and <sys/mount.h> requirement.
Approved by: bz (mentor)
net/route.h.
Remove the hidden include of opt_route.h and net/route.h from net/vnet.h.
We need to make sure that both opt_route.h and net/route.h are included
before net/vnet.h because of the way MRT figures out the number of FIBs
from the kernel option. If we do not, we end up with the default number
of 1 when including net/vnet.h and array sizes are wrong.
This does not change the list of files which depend on opt_route.h
but we can identify them now more easily.
The existing code calls kern_open() to resolve the vnode of a pathname
right after a stat(). This is not correct, because it causes random
character devices to be opened in /dev. This means ls'ing a tape
streamer will cause it to rewind, for example. Changes I have made:
- Add kern_statat_vnhook() to allow binary emulators to `post-process'
struct stat, using the proper vnode.
- Remove unneeded printf's from stat() and statfs().
- Make the Linuxolator use kern_statat_vnhook(), replacing
translate_path_major_minor_at().
- Let translate_fd_major_minor() use vp->v_rdev instead of
vp->v_un.vu_cdev.
Result:
crw-rw-rw- 1 root root 0, 14 Feb 20 13:54 /dev/ptmx
crw--w---- 1 root adm 136, 0 Feb 20 14:03 /dev/pts/0
crw--w---- 1 root adm 136, 1 Feb 20 14:02 /dev/pts/1
crw--w---- 1 ed tty 136, 2 Feb 20 14:03 /dev/pts/2
Before this commit, ptmx also had a major number of 136, because it
silently allocated and deallocated a pseudo-terminal. Device nodes that
cannot be opened now have proper major/minor-numbers.
Reviewed by: kib, netchild, rdivacky (thanks!)
Inside the kernel, the minor() function was responsible for obtaining
the device minor number of a character device. Because we made device
numbers dynamically allocated and independent of the unit number passed
to make_dev() a long time ago, it was actually a misnomer. If you really
want to obtain the device number, you should use dev2udev().
We already converted all the drivers to use dev2unit() to obtain the
device unit number, which is still used by a lot of drivers. I've
noticed not a single driver passes NULL to dev2unit(). Even if they
would, its behaviour would make little sense. This is why I've removed
the NULL check.
Ths commit removes minor(), minor2unit() and unit2minor() from the
kernel. Because there was a naming collision with uminor(), we can
rename umajor() and uminor() back to major() and minor(). This means
that the makedev(3) manual page also applies to kernel space code now.
I suspect umajor() and uminor() isn't used that often in external code,
but to make it easier for other parties to port their code, I've
increased __FreeBSD_version to 800062.
In the existing code we didn't really enforce that callers hold Giant
before calling userland_sysctl(), even though there is no guarantee it
is safe. Fix this by just placing Giant locks around the call to the oid
handler. This also means we only pick up Giant for a very short period
of time. Maybe we should add MPSAFE flags to sysctl or phase it out all
together.
I've also added SYSCTL_LOCK_ASSERT(). We have to make sure sysctl_root()
and name2oid() are called with the sysctl lock held.
Reviewed by: Jille Timmermans <jille quis cx>
compare map->timestamp with saved timestamp after map read lock is
reacquired, not with saved timestamp + 1. The only consequence of the +1
was unconditional lookup of the next map entry, though.
Tested by: pho
Approved by: des
MFC after: 2 weeks
Now the NDISulator supports NDIS USB drivers that it've tested with
devices as follows:
- Anygate XM-142 (Conexant)
- Netgear WG111v2 (Realtek)
- U-Khan UW-2054u (Marvell)
- Shuttle XPC Accessory PN20 (Realtek)
- ipTIME G054U2 (Ralink)
- UNiCORN WL-54G (ZyDAS)
- ZyXEL G-200v2 (ZyDAS)
All of them succeeded to attach and worked though there are still some
problems that it's expected to be solved.
To use NDIS USB support, you should rebuild and install ndiscvt(8) and
if you encounter a problem to attach please set `hw.ndisusb.halt' to
0 then retry.
I expect no changes of the NDIS code for PCI, PCMCIA devices.
Obtained from: //depot/projects/ndisusb/...
jhb probably forgot to commit this file with r185878 and will want to
review this. It unbreaks the build here.
Obtained from: p4 //depot/user/jhb/lock/compat/freebsd32/freebsd32_signal.h#2
aio code and are registered via the recently added SYSCALL32_*() helpers.
- Since the aio code likes to invoke fuword and suword a lot down in the
"bowels" of system calls, add a structure holding a set of operations for
things like storing errors, copying in the aiocb structure, storing
status, etc. The 32-bit system calls use a separate operations vector to
handle fuword32 vs fuword, etc. Also, the oldsigevent handling is now
done by having seperate operation vectors with different aiocb copyin
routines.
- Split out kern_foo() functions for the various AIO system calls so the
32-bit front ends can manage things like copying in and converting
timespec structures, etc.
- For both the native and 32-bit aio_suspend() and lio_listio() calls,
just use copyin() to read the array of aiocb pointers instead of using
a for loop that iterated over fuword/fuword32. The error handling in
the old case was incomplete (lio_listio() just ignored any aiocb's that
it got an EFAULT trying to read rather than reporting an error), and
possibly slower.
MFC after: 1 month
message for r185765.
Noted by: rdivacky
Requested by: des
Commit message for r185765 should be:
In procfs map handler, and in linprocfs maps handler, do not call
vn_fullpath() while having vm map locked. This is done in anticipation
of the vop_vptocnp commit, that would make vn_fullpath sometime
acquire vnode lock.
Also, in linprocfs, maps handler already acquires vnode lock.
No objections from: des
MFC after: 2 week
sbuf instead of doing uiomove. This allows for reads from non-zero
offsets to work.
Patch is forward-ported des@' one, and was adopted to current code
by dchagin@ and me.
Reviewed by: des (linprocfs part)
PR: kern/101453
MFC after: 1 week
directly include only the header files needed. This reduces the
unneeded spamming of various headers into lots of files.
For now, this leaves us with very few modules including vnet.h
and thus needing to depend on opt_route.h.
Reviewed by: brooks, gnn, des, zec, imp
Sponsored by: The FreeBSD Foundation
Change types used in the linux' struct msghdr and struct cmsghdr
definitions to the properly-sized architecture-specific types.
Move ancillary data handler from linux_sendit() to linux_sendmsg().
Submitted by: dchagin
Bring in updated jail support from bz_jail branch.
This enhances the current jail implementation to permit multiple
addresses per jail. In addtion to IPv4, IPv6 is supported as well.
Due to updated checks it is even possible to have jails without
an IP address at all, which basically gives one a chroot with
restricted process view, no networking,..
SCTP support was updated and supports IPv6 in jails as well.
Cpuset support permits jails to be bound to specific processor
sets after creation.
Jails can have an unrestricted (no duplicate protection, etc.) name
in addition to the hostname. The jail name cannot be changed from
within a jail and is considered to be used for management purposes
or as audit-token in the future.
DDB 'show jails' command was added to aid debugging.
Proper compat support permits 32bit jail binaries to be used on 64bit
systems to manage jails. Also backward compatibility was preserved where
possible: for jail v1 syscalls, as well as with user space management
utilities.
Both jail as well as prison version were updated for the new features.
A gap was intentionally left as the intermediate versions had been
used by various patches floating around the last years.
Bump __FreeBSD_version for the afore mentioned and in kernel changes.
Special thanks to:
- Pawel Jakub Dawidek (pjd) for his multi-IPv4 patches
and Olivier Houchard (cognet) for initial single-IPv6 patches.
- Jeff Roberson (jeff) and Randall Stewart (rrs) for their
help, ideas and review on cpuset and SCTP support.
- Robert Watson (rwatson) for lots and lots of help, discussions,
suggestions and review of most of the patch at various stages.
- John Baldwin (jhb) for his help.
- Simon L. Nielsen (simon) as early adopter testing changes
on cluster machines as well as all the testers and people
who provided feedback the last months on freebsd-jail and
other channels.
- My employer, CK Software GmbH, for the support so I could work on this.
Reviewed by: (see above)
MFC after: 3 months (this is just so that I get the mail)
X-MFC Before: 7.2-RELEASE if possible
of the ABI of the currently executing image. Change some places to test
the flags instead of explicit comparing with address of known sysentvec
structures to determine ABI features.
Discussed with: dchagin, imp, jhb, peter
Looking at our source code history, it seems the uname(),
getdomainname() and setdomainname() system calls got deprecated
somewhere after FreeBSD 1.1, but they have never been phased out
properly. Because we don't have a COMPAT_FREEBSD1, just use
COMPAT_FREEBSD4.
Also fix the Linuxolator to build without the setdomainname() routine by
just making it call userland_sysctl on kern.domainname. Also replace the
setdomainname()'s implementation to use this approach, because we're
duplicating code with sysctl_domainname().
I wasn't able to keep these three routines working in our
COMPAT_FREEBSD32, because that would require yet another keyword for
syscalls.master (COMPAT4+NOPROTO). Because this routine is probably
unused already, this won't be a problem in practice. If it turns out to
be a problem, we'll just restore this functionality.
Reviewed by: rdivacky, kib
and server. This replaces the RPC implementation of the NFS client and
server with the newer RPC implementation originally developed
(actually ported from the userland sunrpc code) to support the NFS
Lock Manager. I have tested this code extensively and I believe it is
stable and that performance is at least equal to the legacy RPC
implementation.
The NFS code currently contains support for both the new RPC
implementation and the older legacy implementation inherited from the
original NFS codebase. The default is to use the new implementation -
add the NFS_LEGACYRPC option to fall back to the old code. When I
merge this support back to RELENG_7, I will probably change this so
that users have to 'opt in' to get the new code.
To use RPCSEC_GSS on either client or server, you must build a kernel
which includes the KGSSAPI option and the crypto device. On the
userland side, you must build at least a new libc, mountd, mount_nfs
and gssd. You must install new versions of /etc/rc.d/gssd and
/etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf.
As long as gssd is running, you should be able to mount an NFS
filesystem from a server that requires RPCSEC_GSS authentication. The
mount itself can happen without any kerberos credentials but all
access to the filesystem will be denied unless the accessing user has
a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There
is currently no support for situations where the ticket file is in a
different place, such as when the user logged in via SSH and has
delegated credentials from that login. This restriction is also
present in Solaris and Linux. In theory, we could improve this in
future, possibly using Brooks Davis' implementation of variant
symlinks.
Supporting RPCSEC_GSS on a server is nearly as simple. You must create
service creds for the server in the form 'nfs/<fqdn>@<REALM>' and
install them in /etc/krb5.keytab. The standard heimdal utility ktutil
makes this fairly easy. After the service creds have been created, you
can add a '-sec=krb5' option to /etc/exports and restart both mountd
and nfsd.
The only other difference an administrator should notice is that nfsd
doesn't fork to create service threads any more. In normal operation,
there will be two nfsd processes, one in userland waiting for TCP
connections and one in the kernel handling requests. The latter
process will create as many kthreads as required - these should be
visible via 'top -H'. The code has some support for varying the number
of service threads according to load but initially at least, nfsd uses
a fixed number of threads according to the value supplied to its '-n'
option.
Sponsored by: Isilon Systems
MFC after: 1 month
processes exits at the same time. The linux_emuldata structure is freed
but p->p_emuldata is left as a dangling pointer to the just freed memory.
The check for W_EXIT in the loop scanning the child processes isn't safe
since the state of the child process can change right afterwards. Lock
the process and check the W_EXIT before delivering signal.
Submitted by: tegge
Reviewed by: davidxu
MFC after: 1 week
to add more V* constants, and the variables changed by this patch were often
being assigned to mode_t variables, which is 16 bit.
Approved by: rwatson (mentor)
rest in kern_getdirentries(). Use kern_getdirentries() to implement
freebsd32_getdirentries(). This fixes a bug where calls to getdirentries()
in 32-bit binaries would trash the 4 bytes after the 'long base' in
userland.
Submitted by: ups
MFC after: 1 week
It is required for async cancellation to work.
Fix PROC_LOCK leak in linux_tgkill when signal delivery attempt is made
to not linux process.
Do not call em_find(p, ...) with p unlocked.
Move common code for linux_tkill() and linux_tgkill() into
linux_do_tkill().
Change linux siginfo_t definition to match actual linux one. Extend
uid fields to 4 bytes from 2. The extension does not change structure
layout and is binary compatible with previous definition, because i386
is little endian, and each uid field has 2 byte padding after it.
Reported by: Nicolas Joly <njoly pasteur fr>
Submitted by: dchangin
MFC after: 1 month
user-mode pointers. Change types used in the structures definitions to
properly-sized architecture-specific types.
Submitted by: dchagin
MFC after: 1 week
syscalls expect the bitmap size in the range from 32 to 128. Old glibc
always assumed size 1024, while newer glibc searches for approriate
size, starting from 1024 and going up.
For now, use FreeBSD size of cpuset_t for bitmap size parameter and
return EINVAL if length of user space bitmap less than our size of
cpuset_t.
Submitted by: dchagin
MFC after: 1 week
[This requires MFC of the actual linux affinity syscalls]
sbuf instead of doing uiomove. This allows for reads from non-zero
offsets to work.
Patch is forward-ported des@' one, and was adopted to current code
by dchagin@ and me.
Reviewed by: des (linprocfs part)
PR: kern/101453
MFC after: 1 week
from the vimage project, as per plan established at devsummit 08/08:
http://wiki.freebsd.org/Image/Notes200808DevSummit
Introduce INIT_VNET_*() initializer macros, VNET_FOREACH() iterator
macros, and CURVNET_SET() context setting macros, all currently
resolving to NOPs.
Prepare for virtualization of selected SYSCTL objects by introducing a
family of SYSCTL_V_*() macros, currently resolving to their global
counterparts, i.e. SYSCTL_V_INT() == SYSCTL_INT().
Move selected #defines from sys/sys/vimage.h to newly introduced header
files specific to virtualized subsystems (sys/net/vnet.h,
sys/netinet/vinet.h etc.).
All the changes are verified to have zero functional impact at this
point in time by doing MD5 comparision between pre- and post-change
object files(*).
(*) netipsec/keysock.c did not validate depending on compile time options.
Implemented by: julian, bz, brooks, zec
Reviewed by: julian, bz, brooks, kris, rwatson, ...
Approved by: julian (mentor)
Obtained from: //depot/projects/vimage-commit2/...
X-MFC after: never
Sponsored by: NLnet Foundation, The FreeBSD Foundation
includes syscall32_{de,}register() routines as well as a module handler
and wrapper macros similar to the support for native syscalls in
<sys/sysent.h>.
MFC after: 1 month
- Instead of using a syscall slot (370) just to get a function prototype
for lkmressys(), add an explicit function prototype to <sys/sysent.h>.
This also removes unused special case checks for 'lkmressys' from
makesyscalls.sh.
- Instead of having magic logic in makesyscalls.sh to only generate a
function prototype the first time 'lkmnosys' is seen, make 'NODEF'
always not generate a function prototype and include an explicit
prototype for 'lkmnosys' in <sys/sysent.h>.
- As a result of the fix in (2), update the LKM syscall entries in
the freebsd32 syscall table to use 'lkmnosys' rather than 'nosys'.
- Use NOPROTO for the __syscall() entry (198) in the native ABI. This
avoids the need for magic logic in makesyscalls.h to only generate
a function prototype the first time 'nosys' is encountered.
to the C99 style. At least, it is easier to read sysent definitions
that way, and search for the actual instances of sigcode etc.
Explicitely initialize sysentvec.sv_maxssiz that was missed in most
sysvecs.
No objection from: jhb
MFC after: 1 month
It seems we only depend on COMPAT_43 to implement the send() and recv()
routines. We can easily implement them using sendto() and recvfrom(),
just like we do inside our very own C library.
I wasn't able to really test it, apart from simple compilation testing.
I've heard rumours that COMPAT_SVR4 is broken inside execve() anyway.
It's still worth to fix this, because I suspect we'll get rid of
COMPAT_43 somewhere in the future...
Reviewed by: rdivacky
Discussed with: jhb
as with getdents64. The last byte is used for storing
the d_type, add this to plain getdents case where it was
missing before. Also change the code to use strlcpy instead
of plain strcpy. This changes fix the getdents crash we
had reports about (hl2 server etc.)
PR: kern/117010
MFC after: 1 week
Submitted by: Dmitry Chagin (dchagin@)
Tested by: MITA Yoshio <mita ee.t.u-tokyo.ac jp>
Approved by: kib (mentor)
allocated for posix_openpt(2). Unfortunately, that identifier
conflicts with other events already allocated to other systems in
OpenBSM. Assign a new globally unique identifier and conform
better to the AUE_ event naming scheme.
This is a stopgap until a new OpenBSM import is done with the
correct identifier, so we'll maintain this as a local diff in svn
until then.
Discussed with: ed
Obtained from: TrustedBSD Project
The previous commit also included changes to all the system call lists,
but it is a tradition to update these lists in a second commit, so rerun
make sysent to update the $FreeBSD$ tags inside these files to refer to
the latest version of syscalls.master.
Requested by: rwatson
The last half year I've been working on a replacement TTY layer for the
FreeBSD kernel. The new TTY layer was designed to improve the following:
- Improved driver model:
The old TTY layer has a driver model that is not abstract enough to
make it friendly to use. A good example is the output path, where the
device drivers directly access the output buffers. This means that an
in-kernel PPP implementation must always convert network buffers into
TTY buffers.
If a PPP implementation would be built on top of the new TTY layer
(still needs a hooks layer, though), it would allow the PPP
implementation to directly hand the data to the TTY driver.
- Improved hotplugging:
With the old TTY layer, it isn't entirely safe to destroy TTY's from
the system. This implementation has a two-step destructing design,
where the driver first abandons the TTY. After all threads have left
the TTY, the TTY layer calls a routine in the driver, which can be
used to free resources (unit numbers, etc).
The pts(4) driver also implements this feature, which means
posix_openpt() will now return PTY's that are created on the fly.
- Improved performance:
One of the major improvements is the per-TTY mutex, which is expected
to improve scalability when compared to the old Giant locking.
Another change is the unbuffered copying to userspace, which is both
used on TTY device nodes and PTY masters.
Upgrading should be quite straightforward. Unlike previous versions,
existing kernel configuration files do not need to be changed, except
when they reference device drivers that are listed in UPDATING.
Obtained from: //depot/projects/mpsafetty/...
Approved by: philip (ex-mentor)
Discussed: on the lists, at BSDCan, at the DevSummit
Sponsored by: Snow B.V., the Netherlands
dcons(4) fixed by: kan
virtualization work done by Marko Zec (zec@).
This is the first in a series of commits over the course
of the next few weeks.
Mark all uses of global variables to be virtualized
with a V_ prefix.
Use macros to map them back to their global names for
now, so this is a NOP change only.
We hope to have caught at least 85-90% of what is needed
so we do not invalidate a lot of outstanding patches again.
Obtained from: //depot/projects/vimage-commit2/...
Reviewed by: brooks, des, ed, mav, julian,
jamie, kris, rwatson, zec, ...
(various people I forgot, different versions)
md5 (with a bit of help)
Sponsored by: NLnet Foundation, The FreeBSD Foundation
X-MFC after: never
V_Commit_Message_Reviewed_By: more people than the patch
We're very lucky, because the flags used by our TIOCPKT implementation
are the same as flags used by Linux. We can safely enable TIOCPKT,
assuming EXTPROC is not used.
TIOCSPTLCK is used by unlockpt(). Because we don't need unlockpt() in
our implementation, make this ioctl a no-op.
Approved by: philip (mentor, implicit), rdivacky
Obtained from: P4 (//depot/projects/mpsafetty/...)
return NDIS_STATUS_PENDING. In this case, it's waiting for 5 secs to
get the response from drivers now. However, some NDIS drivers can send
the response before NDIS framework gets ready to receive it so we might
always be blocked for 5 secs in current implementation. NDIS framework
should reset the event before calling NDIS driver's callback not after.
MFC after: 1 month
As a result, those arguments must be recombined before calling the real
syscal implementation. This change fixes 32-bit compatibility for
cpuset_getid(), cpuset_setid(), cpuset_getaffinity(), and
cpuset_setaffinity().
to global hostname and domainname variables. Where necessary, copy
to or from a stack-local buffer before performing copyin() or
copyout(). A few uses, such as in cd9660 and daemon_saver, remain
under-synchronized and will require further updates.
Correct a bug in which a failed copyin() of domainname would leave
domainname potentially corrupted.
MFC after: 3 weeks
In the mpsafetty branch, Linux sshd seems to work properly inside a
jail. Some small modifications had to be made to the Linux compatibility
layer.
The Linux PTY routines always expect the device major number to be 136
or higher. Our code always set the major/minor number pair to 136:0.
This makes routines like ttyname() and ptsname() fail, because we'll end
up having ambiguous device numbers.
The conversion was not performed on all *stat() routines, which meant in
some cases the numbers didn't get transformed. By pushing the conversion
into linux_driver_get_major_minor(), the transformation will take place
on all calls.
Approved by: philip (mentor), rdivacky
what Linux does. This is because robust futexes are mostly
userspace thing which we cannot alter. Two syscalls maintain
pointer to userspace list and when process exits a routine
walks this list waking up processes sleeping on futexes
from that list.
Reviewed by: kib (mentor)
MFC after: 1 month