than removing the network interfaces first. This change is rather larger
and convoluted as the ordering requirements cannot be separated.
Move the pfil(9) framework to SI_SUB_PROTO_PFIL, move Firewalls and
related modules to their own SI_SUB_PROTO_FIREWALL.
Move initialization of "physical" interfaces to SI_SUB_DRIVERS,
move virtual (cloned) interfaces to SI_SUB_PSEUDO.
Move Multicast to SI_SUB_PROTO_MC.
Re-work parts of multicast initialisation and teardown, not taking the
huge amount of memory into account if used as a module yet.
For interface teardown we try to do as many of them as we can on
SI_SUB_INIT_IF, but for some this makes no sense, e.g., when tunnelling
over a higher layer protocol such as IP. In that case the interface
has to go along (or before) the higher layer protocol is shutdown.
Kernel hhooks need to go last on teardown as they may be used at various
higher layers and we cannot remove them before we cleaned up the higher
layers.
For interface teardown there are multiple paths:
(a) a cloned interface is destroyed (inside a VIMAGE or in the base system),
(b) any interface is moved from a virtual network stack to a different
network stack ("vmove"), or (c) a virtual network stack is being shut down.
All code paths go through if_detach_internal() where we, depending on the
vmove flag or the vnet state, make a decision on how much to shut down;
in case we are destroying a VNET the individual protocol layers will
cleanup their own parts thus we cannot do so again for each interface as
we end up with, e.g., double-frees, destroying locks twice or acquiring
already destroyed locks.
When calling into protocol cleanups we equally have to tell them
whether they need to detach upper layer protocols ("ulp") or not
(e.g., in6_ifdetach()).
Provide or enahnce helper functions to do proper cleanup at a protocol
rather than at an interface level.
Approved by: re (hrs)
Obtained from: projects/vnet
Reviewed by: gnn, jhb
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D6747
Some virtual if drivers has (ab)used ifa ifa_rtrequest hook to enforce
route MTU to be not bigger that interface MTU. While ifa_rtrequest hooking
might be an option in some situation, it is not feasible to do MTU checks
there: generic (or per-domain) routing code is perfectly capable of doing
this.
We currrently have 3 places where MTU is altered:
1) route addition.
In this case domain overrides radix _addroute callback (in[6]_addroute)
and all necessary checks/fixes are/can be done there.
2) route change (especially, GW change).
In this case, there are no explicit per-domain calls, but one can
override rte by setting ifa_rtrequest hook to domain handler
(inet6 does this).
3) ifconfig ifaceX mtu YYYY
In this case, we have no callbacks, but ip[6]_output performes runtime
checks and decreases rt_mtu if necessary.
Generally, the goals are to be able to handle all MTU changes in
control plane, not in runtime part, and properly deal with increased
interface MTU.
This commit changes the following:
* removes hooks setting MTU from drivers side
* adds proper per-doman MTU checks for case 1)
* adds generic MTU check for case 2)
* The latter is done by using new dom_ifmtu callback since
if_mtu denotes L3 interface MTU, e.g. maximum trasmitted _packet_ size.
However, IPv6 mtu might be different from if_mtu one (e.g. default 1280)
for some cases, so we need an abstract way to know maximum MTU size
for given interface and domain.
* moves rt_setmetrics() before MTU/ifa_rtrequest hooks since it copies
user-supplied data which must be checked.
* removes RT_LOCK_ASSERT() from other ifa_rtrequest hooks to be able to
use this functions on new non-inserted rte.
More changes will follow soon.
MFC after: 1 month
Sponsored by: Yandex LLC
- Use counter(9) for rt_pksent (former rt_rmx.rmx_pksent). This
removes another cache trashing ++ from packet forwarding path.
- Create zini/fini methods for the rtentry UMA zone. Via initialize
mutex and counter in them.
- Fix reporting of rmx_pksent to routing socket.
- Fix netstat(1) to report "Use" both in kvm(3) and sysctl(3) mode.
The change is mostly targeted for stable/10 merge. For head,
rt_pksent is expected to just disappear.
Discussed with: melifaro
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
to this event, adding if_var.h to files that do need it. Also, include
all includes that now are included due to implicit pollution via if_var.h
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
now use function calls:
if_clone_simple()
if_clone_advanced()
to initialize a cloner, instead of macros that initialize if_clone
structure.
Discussed with: brooks, bz, 1 year ago
parameter that can specify configuration parameters:
o rev cloner api's to add optional parameter block
o add SIOCCREATE2 that accepts parameter data
o rev vlan support to use new api (maintain old code)
Reviewed by: arch@
(1) bpf peer attaches to interface netif0
(2) Packet is received by netif0
(3) ifp->if_bpf pointer is checked and handed off to bpf
(4) bpf peer detaches from netif0 resulting in ifp->if_bpf being
initialized to NULL.
(5) ifp->if_bpf is dereferenced by bpf machinery
(6) Kaboom
This race condition likely explains the various different kernel panics
reported around sending SIGINT to tcpdump or dhclient processes. But really
this race can result in kernel panics anywhere you have frequent bpf attach
and detach operations with high packet per second load.
Summary of changes:
- Remove the bpf interface's "driverp" member
- When we attach bpf interfaces, we now set the ifp->if_bpf member to the
bpf interface structure. Once this is done, ifp->if_bpf should never be
NULL. [1]
- Introduce bpf_peers_present function, an inline operation which will do
a lockless read bpf peer list associated with the interface. It should
be noted that the bpf code will pickup the bpf_interface lock before adding
or removing bpf peers. This should serialize the access to the bpf descriptor
list, removing the race.
- Expose the bpf_if structure in bpf.h so that the bpf_peers_present function
can use it. This also removes the struct bpf_if; hack that was there.
- Adjust all consumers of the raw if_bpf structure to use bpf_peers_present
Now what happens is:
(1) Packet is received by netif0
(2) Check to see if bpf descriptor list is empty
(3) Pickup the bpf interface lock
(4) Hand packet off to process
From the attach/detach side:
(1) Pickup the bpf interface lock
(2) Add/remove from bpf descriptor list
Now that we are storing the bpf interface structure with the ifnet, there is
is no need to walk the bpf interface list to locate the correct bpf interface.
We now simply look up the interface, and initialize the pointer. This has a
nice side effect of changing a bpf interface attach operation from O(N) (where
N is the number of bpf interfaces), to O(1).
[1] From now on, we can no longer check ifp->if_bpf to tell us whether or
not we have any bpf peers that might be interested in receiving packets.
In collaboration with: sam@
MFC after: 1 month
softc lists and associated mutex are now unused so these have been removed.
Calling if_clone_detach() will now destroy all the cloned interfaces for the
driver and in most cases is all thats needed to unload.
Idea by: brooks
Reviewed by: brooks
cloner. This ensures that ifc->ifc_units is not prematurely freed in
if_clone_detach() before the clones are destroyed, resulting in memory modified
after free. This could be triggered with if_vlan.
Assert that all cloners have been destroyed when freeing the memory.
Change all simple cloners to destroy their clones with ifc_simple_destroy() on
module unload so the reference count is properly updated. This also cleans up
the interface destroy routines and allows future optimisation.
Discussed with: brooks, pjd, -current
Reviewed by: brooks
a DLT_NULL interface. In particular:
1) Consistently use type u_int32_t for the header of a
DLT_NULL device - it continues to represent the address
family as always.
2) In the DLT_NULL case get bpf_movein to store the u_int32_t
in a sockaddr rather than in the mbuf, to be consistent
with all the DLT types.
3) Consequently fix a bug in bpf_movein/bpfwrite which
only permitted packets up to 4 bytes less than the MTU
to be written.
4) Fix all DLT_NULL devices to have the code required to
allow writing to their bpf devices.
5) Move the code to allow writing to if_lo from if_simloop
to looutput, because it only applies to DLT_NULL devices
but was being applied to other devices that use if_simloop
possibly incorrectly.
PR: 82157
Submitted by: Matthew Luckie <mjl@luckie.org.nz>
Approved by: re (scottl)
struct ifnet or the layer 2 common structure it was embedded in have
been replaced with a struct ifnet pointer to be filled by a call to the
new function, if_alloc(). The layer 2 common structure is also allocated
via if_alloc() based on the interface type. It is hung off the new
struct ifnet member, if_l2com.
This change removes the size of these structures from the kernel ABI and
will allow us to better manage them as interfaces come and go.
Other changes of note:
- Struct arpcom is no longer referenced in normal interface code.
Instead the Ethernet address is accessed via the IFP2ENADDR() macro.
To enforce this ac_enaddr has been renamed to _ac_enaddr.
- The second argument to ether_ifattach is now always the mac address
from driver private storage rather than sometimes being ac_enaddr.
Reviewed by: sobomax, sam
for unknown events.
A number of modules return EINVAL in this instance, and I have left
those alone for now and instead taught MOD_QUIESCE to accept this
as "didn't do anything".
- Split the code out into if_clone.[ch].
- Locked struct if_clone. [1]
- Add a per-cloner match function rather then simply matching names of
the form <name><unit> and <name>.
- Use the match function to allow creation of <interface>.<tag>
vlan interfaces. The old way is preserved unchanged!
- Also the match function to allow creation of stf(4) interfaces named
stf0, stf, or 6to4. This is the only major user visible change in
that "ifconfig stf" creates the interface stf rather then stf0 and
does not print "stf0" to stdout.
- Allow destroy functions to fail so they can refuse to delete
interfaces. Currently, we forbid the deletion of interfaces which
were created in the init function, particularly lo0, pflog0, and
pfsync0. In the case of lo0 this was a panic implementation so it
does not count as a user visiable change. :-)
- Since most interfaces do not need the new functionality, an family of
wrapper functions, ifc_simple_*(), were created to wrap old style
cloner functions.
- The IF_CLONE_INITIALIZER macro is replaced with a new incompatible
IFC_CLONE_INITIALIZER and ifc_simple consumers use IFC_SIMPLE_DECLARE
instead.
Submitted by: Maurycy Pawlowski-Wieronski <maurycy at fouk.org> [1]
Reviewed by: andre, mlaier
Discussed on: net
Since there are two destroy paths for if_disc interfaces --
module unload and cloan interface destroy, create a new utility
function disc_destroy(), which is callded on a softc after it
has been removed from the global softc list; the cloaner and
module unload entry paths will both remove it before calling
disc_destroy().
Reviewed by: pjd
a new bpf_mtap2 routine that does the right thing for an mbuf
and a variable-length chunk of data that should be prepended.
o while we're sweeping the drivers, use u_int32_t uniformly when
when prepending the address family (several places were assuming
sizeof(int) was 4)
o return M_ASSERTVALID to BPF_MTAP* now that all stack-allocated
mbufs have been eliminated; this may better be moved to the bpf
routines
Reviewed by: arch@ and several others
if_xname, if_dname, and if_dunit. if_xname is the name of the interface
and if_dname/unit are the driver name and instance.
This change paves the way for interface renaming and enhanced pseudo
device creation and configuration symantics.
Approved By: re (in principle)
Reviewed By: njl, imp
Tested On: i386, amd64, sparc64
Obtained From: NetBSD (if_xname)
that covers updates to the contents. Note this is separate from holding
a reference and/or locking the routing table itself.
Other/related changes:
o rtredirect loses the final parameter by which an rtentry reference
may be returned; this was never used and added unwarranted complexity
for locking.
o minor style cleanups to routing code (e.g. ansi-fy function decls)
o remove the logic to bump the refcnt on the parent of cloned routes,
we assume the parent will remain as long as the clone; doing this avoids
a circularity in locking during delete
o convert some timeouts to MPSAFE callouts
Notes:
1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level
applications cannot/do-no know about mutex's. Doing this requires
that the mutex be the last element in the structure. A better solution
is to introduce an externalized version of struct rtentry but this is
a major task because of the intertwining of rtentry and other data
structures that are visible to user applications.
2. There are known LOR's that are expected to go away with forthcoming
work to eliminate many held references. If not these will be resolved
prior to release.
3. ATM changes are untested.
Sponsored by: FreeBSD Foundation
Obtained from: BSD/OS (partly)
of asserting that an mbuf has a packet header. Use it instead of hand-
rolled versions wherever applicable.
Submitted by: Hiten Pandya <hiten@unixdaemons.com>
o on input don't strip the Ethernet header from packets
o input packet handling is now done with if_input
o track changes to ether_ifattach/ether_ifdetach API
o track changes to bpf tapping
o call ether_ioctl for default handling of ioctl's
o use constants from net/ethernet.h where possible
Reviewed by: many
Approved by: re
Have sys/net/route.c:rtrequest1(), which takes ``rt_addrinfo *''
as the argument. Pass rt_addrinfo all the way down to rtrequest1
and ifa->ifa_rtrequest. 3rd argument of ifa->ifa_rtrequest is now
``rt_addrinfo *'' instead of ``sockaddr *'' (almost noone is
using it anyways).
Benefit: the following command now works. Previously we needed
two route(8) invocations, "add" then "change".
# route add -inet6 default ::1 -ifp gif0
Remove unsafe typecast in rtrequest(), from ``rtentry *'' to
``sockaddr *''. It was introduced by 4.3BSD-Reno and never
corrected.
Obtained from: BSD/OS, NetBSD
MFC after: 1 month
PR: kern/28360
packet divert at kernel for IPv6/IPv4 translater daemon
This includes queue related patch submitted by jburkhol@home.com.
Submitted by: queue related patch from jburkhol@home.com
Reviewed by: freebsd-arch, cvs-committers
Obtained from: KAME project
This means that we will not have to have a bpf and a non-bpf version
of our driver modules.
This does not open any security hole, because the bpf core isn't loadable
The drivers left unchanged are the "cross platform" drivers where the respective
maintainers are urged to DTRT, whatever that may be.
Add a couple of missing FreeBSD tags.
FreeBSD/alpha. The most significant item is to change the command
argument to ioctl functions from int to u_long. This change brings us
inline with various other BSD versions. Driver writers may like to
use (__FreeBSD_version == 300003) to detect this change.
The prototype FreeBSD/alpha machdep will follow in a couple of days
time.
This will not make any of object files that LINT create change; there
might be differences with INET disabled, but hardly anything compiled
before without INET anyway. Now the 'obvious' things will give a
proper error if compiled without inet - ipx_ip, ipfw, tcp_debug. The
only thing that _should_ work (but can't be made to compile reasonably
easily) is sppp :-(
This commit move struct arpcom from <netinet/if_ether.h> to
<net/if_arp.h>.
