The problem is caused when a directory block is compacted. When this
occurs, softdep_change_directoryentry_offset() is called to relocate each
directory entry and adjust its matching diradd structure, if any, to match
the new location of the entry. The bug is that while
softdep_change_directoryentry_offset() correctly adjusts the offsets of
the diradd structures on the pd_diraddhd[] lists (which are not yet ready
to be committed to disk), it fails to adjust the offsets of the diradd
structures on the pd_pendinghd list (which are ready to be committed to
disk). This causes the dependency structures to be inconsistent with
the buf contents. Now, if the compaction has moved a directory entry to
the same offset as one of the diradd structures on the pd_pendinghd list
*and* a syscall is done that tries to remove this directory entry before
this directory block has been written to disk (which would empty
pd_pendinghd), a sanity check in newdirrem() will call panic() when it
notices that the inode number in the entry that it is to be removed doesn't
match the inode number in the diradd structure with that offset of that
entry.
Reviewed by: Kirk McKusick <mckusick@McKusick.COM>
Submitted by: Don Lewis <Don.Lewis@tsc.tdk.com>
may insert into the list of loaded libraries (ours is one) instead of
appending to the end of the list. Also cope with dlclose() removing
libraries from the list.
Submitted by: Kirk McKusick <mckusick@McKusick.COM>
Two minor changes are also included,
1. Remove gratuitious checks for error return from vn_lock with LK_RETRY set,
vn_lock should always succeed in these cases.
2. Back out change rev. 1.36->1.37, which unnecessarily makes async mount
a little more unstable. It also keeps us in sync with other BSDs.
Suggested by: Bruce Evans <bde@zeta.org.au>
rev 1.5)
The "nfsv2" option is equivant to "proto=udp,vers=2". It is debatable
whether NFS v2 should force "proto=udp" but I figure that is what most people
will expect. Note, I can get the new Amd to mount a 2.2-STABLE box with
"proto=tcp,vers=2". RFC 1094 does not disallow such behavior.
The am-utils manpages were un-mandocafied, un4.4BSD'ed with CSRG
copyrights regressed to 1989.
This work was done by Brian Handy who I am very greatful to.
(only a few minor tweaks by me)
Submitted by: Brian Handy <handy@lambic.physics.montana.edu>
the executable file, so it will work for both a.out and ELF format
files. I have split the object format specific code into separate
source files. It's cleaner than it was before, but it's still
pretty crufty.
Don't cheat on your make world for this update. A lot of things
have to be rebuilt for it to work, including the compiler and all
of the profiled libraries.
This is enabled by the undocumented option -fformat-extensions.
This option should be named better and/or give more control over
the extensions.
Fixed a message - don't warn about the field width when it's the
precision that has the wrong type. Didn't fix excessive checking
for the precision relative to the type - ANSI requires both to be
ints, but gcc permits the field width to be either int or unsigned
int.
in the behavior via the previously default #define DONT_FSYNC, use the
-s flag to turn the fsync() behavior on. This can be configured in
sendmail.cf without recompiling mail.local.
attribute. It is like the existing "printf" archetype, except that
it doesn't complain if the format string is a null pointer. See
the node "Function Attributes" in the GCC info pages if you don't
know what this is all about.
This change will allow us to add format string checking for the
err(3) family of functions.
that had an inode that has not yet been written to disk, when the inode of the
new file is also not yet written to disk, and your old directory entry is not
yet on disk but you need to remove it and the new name exists in memory
but has been deleted but the transaction to write the deleted name to disk
exists and has not yet been cancelled by the request to delete the non
existant name. I don't know how kirk could have missed such a glaring
problem for so long. :-) Especially since the inconsitency survived on
the disk for a whole 4 second on average before being fixed by other code.
This was not a crashing bug but just led to filesystem inconsitencies
if you crashed.
Submitted by: Kirk McKusick (mckusick@mckusick.com)
and we have not done an explicit 'cvs login', then use a default password
of "anoncvs". This allows things like:
setenv CVSROOT :pserver:anoncvs@anoncvs.freebsd.org:/cvs
cvs checkout src (without doing the normal 'cvs login' for pserver mode)
but this runs over the :pserver: protocol rather than the more troublesome
rsh. Naturally, the server had better be running in -R (readonly) mode :-)
CVSROOT/passwd file is empty. A 'cvs login' still seems to be required
since the cvs client doesn't seem to believe it's possible to not need
a password (yet :-). This is intended for cheap anoncvs use.
This is mostly intended for use on freefall where we'd like to provide
a passwd file for easy anoncvs mirroring access, but don't want to open
up the pserver on freefall itself.
While here, some initial tweaks intended for allowing an empty pserver
password. I'm not sure that this works yet.
while calling libdiff. It's too ugly and not worth the recursion problems
when there is a malloc failure (which writes to stderr - now diverted via
the buf system, which calls malloc, which causes another error message etc).
We can live with the standard artificial slowdown, but reduce the time a
bit and only delay when we really need to (ie: when running as a server).
The usleep time could probably use some tuning, it basically needs to
replace the time that it used to take to fork a large process, exec gnudiff
and the time that gnudiff took before writing the initial output.
This eliminates a whole mess of other hacks I was considering that changed
use of xmalloc to alloca() etc. It was going too fast in the wrong
direction.
not being echoed to the output. So as a _hack_ to get the world building
again, redirect the readline rl_outstream to stderr when not interactive.
The proper way to handle non-interactive mode is to read from stdin
and don't worry about edit mode, but this is GNU so it's not worth the
time thinking about. I'm already pissed off that I even had to look
at this "nice code".
depends on the typo in the #ifdef in order to work.. Since the line has
been touched, leave a note there so that nobody else tries to "fix" it
again.
PR: 2035
new ones that we generate. We used to always mix the old header with
the new .cc file. This worked because Cygnus's yacc is surprisingly
compatible with our yacc.
aout and elf support. freebsd-elf.h died as a result, so the BINFORMAT
test for elf in src/gnu/usr.bin/cc/cc_tool/Makefile will need to
use freebsd.h, not freebsd-elf.h. That means that alpha will have to
go the same way. The new alpha/freebsd.h has the alpha/freebsd-elf.h
definitions merged in.
1998-03-07 Tim Pierce <twp@skepsis.com>
* rcs.c (RCS_checkout): Negation bug when checking out symlinks:
existence_error should be !existence_error.
This shouldn't cause any major merge problems later.
i386-elf because that is what will be used for FreeBSD/Alpha.
Change the STARTFILE_SPEC to match the non-aout version of i386 so
that the csu files can be built in exactly the same way as i386-elf.
This means that FreeBSD/Alpha departs from NetBSD/Alpha which uses
crt0 and crtbegin/crtend. Since i386-aout uses crt0, I guess it was
decided that i386-elf should use crt1. i386-elf also references
crti and with this change, so does FreeBAS/Alpha.
I think it is important for FreeBSD to have a consistent implementation
across architectures and since ELF is quite compatible (ignoring
differences in 32 and 64 bits), gcc might as well be configured the
same.
Another change is that the entry symbol is _start, not __start as
in NetBSD.
starting with hashes have a sub-optimal impact. This change adds
/* */ around the block comment in the header of each file to make
them friendly to cpp. Also added an Id keyword cause I like to
see revision numbers in source.
a.out gas and the binutils gas (elf or a.out) with a single compiler.
This uses other infrastructure not yet committed, in order to support
both a.out and elf it needs to be able to get to both a.out and elf
gas, ld, libs, crt* etc. So for now, the support is pretty much dormant.
The new freebsd.h file is based on the old freebsd-elf.h file (which has a
long lineage, right back through linux and svr4 files). The change is
pretty dramatic from a gcc internals standpoint as it overrides a lot of
definitions in order to generate different output based on target mode.
There is potential for screw-ups, so please be on the lookout - gcc's
configuration mechanism wasn't really meant for this kind of thing.
It's believed to compile world etc just fine under both a.out and elf, can
handle global constructors and destructors, handles the differences in
a.out and elf stabs, and what sections things like exceptions go in.
The initial idea came from i386/osfrose.h which is a dual rose/elf format
target. These two are not as diverse as a.out and elf it would seem.
The cc front-end uses external configuration to determine default object
format (still being thrashed out, so read the source if you want to see
it so far), and has a '-aout' and '-elf' override command line switch.
There are some other internal switches that can be accessed, namely -maout,
-mno-aout, -munderscores and -mnounderscores. The underscore and local
symbol prefixing rules are controllable seperately to the output format.
(ie: it's possible to generate a.out without the _ prefixes on symbols and
also to generate elf with the _ prefixes. This isn't quite optimal, but
does seem to work pretty well, except the linkers don't always recognise
the local symbols without their normal names)
The default format is a.out (still), nobody should see any major changes.
With both elf and a.out tools and libraries installed:
[1:26pm]/tmp-223> cc -elf -o hello hello.c
peter@beast[1:27pm]/tmp-224> file hello
hello: ELF 32-bit LSB executable, Intel 80386, version 1 (FreeBSD), dynamically linked, not stripped
[1:27pm]/tmp-225> ./hello
hello world!
[1:27pm]/tmp-226> cc -aout -o hello hello.c
[1:27pm]/tmp-227> file hello
hello: FreeBSD/i386 compact demand paged dynamically linked executable not stripped
1:27pm]/tmp-228> ./hello
hello world!
Since my co-conspirators put a lot of effort into this too, I'll add them
so they can share the blame^H^H^H^H^Hglory. :-)
Reviewed by: sos, jdp
"lorder" command.
GNU rejected this change because they felt it would be an unacceptable
incompatibility to change the output format at this point -- even
though it was wrong to begin with.
affects speed of doing 'cvs diff' (in all modes) and 'cvs update' over the
network.
1: don't pause at all unless running in server protocol mode.
2: if running in server protocol mode, do a kludge that intercepts the
stdout and stderr write functions and diverts them to cvs_output() and
cvs_outerr(). Yes, this might be done with fwopen() etc, but that also
requires copying "FILE" structs since you can't freopen stdout etc and
specify functions at the same time.
This HACK will go away once the cvs folks have done their changes to the
library version of gnu diff to use the callbacks as mentioned in the
comments.
things fixed in here, including the '-ko' vs. -A problem with
remote cvs which caused all files with -ko to be resent each time
(which is damn painful over a modem, I can tell you). It also found a
heap of stray empty directories that should have been pruned with the -P
flag to cvs update but were not for some reason.
It also has the fully integrated rcs and diff, so no more fork/exec
overheads for rcs,ci,patch,diff,etc. This means that it parses the control
data in the rcs files only once rather than twice or more.
If the 'cvs diff' vs. Index thing is going to be fixed for future patch
compatability, this is the place to do it.
on a checkout.
this allows us to do:
cd /usr/src/sys
cvs update -rRELENGE_2_2 -D"Yesterday"
which has been a feature sorely needed for any project with active branches.
warning: this breaks on usr.sbin/pkg_install for some reason.
everything else works as advertised.
(other things allready break on pkg_install, so it's not the fault of
this patch, it just falls faul of another bug somewhere)
If I had more time I'd make -r always accept the same syntax as -j (tag:data)
See freebsd.h and freebsd-elf.h for the silly comment that cgd@netbsd.org
wanted me to add about his claim that uncommented source files that
have been publicly available for ftp for nearly a year; that are
configuration patches to a GPL'ed program; are owned by his previous
employer who refuses to release them. Well... I did as he said. As if
that makes a difference!
At this point we've got cpp, gcc, g++ ported to FreeBSD/Alpha so all
the code that uses __FreeBSD__ is correctly pre-processed. Yay.
I'll commit the bootstrap makefile next to let others play, then on
to libc.
Change errno -> error in local structure to avoid a clash with the
thread-aware version of errno which is required for a thread-safe libc.
Have discussed this with the author and he has agreed to this change. 8-)
