meowthink@gmail.com reported that the gssd daemon was not
starting, because /etc/rc.d/gssd was executed before his local
/usr file system was mounted.
He fixed the problem by adding mountcritlocal to the REQUIRED
line.
This fix seems safe and works for a separately mounted /usr file
system on a local disk.
The case of a separately mounted remote /usr file system (such as
NFS) is still broken, but there is no obvious solution for that.
Adding mountcritremote would fix the problem, but it would
cause a POLA violation, because all kerberized NFS mounts
in /etc/fstab would need the "late" option specified to work.
Submitted by: meowthink@gmail.com
Reported by: meowthink@gmail.com
Reviewed by: 0mp
MFC after: 2 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D27203
r376026 added a new "-R" option to mountd, which tells it to
not support the Mount protocol (not used by NFSv4) and not
register with rpcbind.
Rpcbind is considered a security issue by some sites now.
This patch adds a new yes/no variable called nfsv4_server_only.
When that is set, make vfs.nfsd.server_min_vers=4 and set "=R"
for mountd.
Setting vfs.nfsd.server_min_vers=4 tells nfsd to not register with rpcbind.
While here, add a check for "load_kld nfsd" failing to nfsd.
Reviewed by: 0mp
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D26938
The variable defaults to "/usr/local", unless sysctl returns some other
value for "user.localbase".
The value of user.localbase defaults to _PATH_LOCALBASE as defined in
paths.h and thus this commit has no immediate effect.
The purpose of this change is to make /etc/defaults/rc.conf automatically
use the value of _PATH_LOCALBASE when not set to the default value.
Reviewed by: imp, scottl
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D27014
The problem is that Without walling /etc/rc.d/zfs on shutdown, resources
associated with ZFS mounts are not freed and the jails will remain in dying
state. In addition, the dataset is now in a dangling state, as the jail it
is attached to is dying.
A known workaround for jails was to add the following lines
to /etc/jail.conf, to make sure that "service zfs stop" is run
when the jail is stopped:
exec.stop = "/bin/sh /etc/rc.shutdown";
exec.stop += "/usr/sbin/service zfs stop || /usr/bin/true";
While the workaround seems to be okay-ish for the jail situation, it is
still unclean. However, for physical hosts this may wreak havoc with the
pool if shared spares are used, as "zfs unshare" is never invoked on
shutdown.
PR: 147444
Submitted by: Markus Stoff <markus__stoffdv_at>
Reported by: Mykah <mburkhardt__exavault_com>
Reviewed by: cy
Approved by: cy (src)
MFC after: 1 week
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D27039
This is especially important during shutdown because a child interface
of lagg with WOL enabled will not enable WOL at interface shutdown and
thus no WOL to wake up the device (and machine).
PR: 158734, 109980
Reported by: Antonio Huete Jimenez <tuxillo at quantumachine.net>
Marat N.Afanasyev <marat at zealot.ksu.ru>
reviewed by: kp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D26797
When a system with pf_enable="YES" in /etc/rc.conf uses hostnames in
/etc/pf.conf, these hostnames cannot be resolved via external nameservers
because the default route is not yet set. This results in an empty
(all open) ruleset.
Since r195026 already put netif back to REQUIRE, this change does not affect
the issue that the firewall should rather have been setup before any
network traffic can occur.
PR: 211928
Submitted by: Robert Schulze
Reported by: Robert Schulze
Tested by: Mateusz Kwiatkowski
No objections from: kp
MFC after: 3 days
bootonce feature is temporary, one time boot, activated by
"bectl activate -t BE", "bectl activate -T BE" will reset the bootonce flag.
By default, the bootonce setting is reset on attempt to boot and the next
boot will use previously active BE.
By setting zfs_bootonce_activate="YES" in rc.conf, the bootonce BE will
be set permanently active.
bootonce dataset name is recorded in boot pool labels, bootenv area.
in case of nextboot, the nextboot_enable boolean variable is recorded in
freebsd:nvstore nvlist, also stored in boot pool label bootenv area.
On boot, the loader will process /boot/nextboot.conf if nextboot_enable
is "YES", and will set nextboot_enable to "NO", preventing /boot/nextboot.conf
processing on next boot.
bootonce and nextboot features are usable in both UEFI and BIOS boot.
To use bootonce/nextboot features, the boot loader needs to be updated on disk;
if loader.efi is stored on ESP, then ESP needs to be updated and
for BIOS boot, stage2 (zfsboot or gptzfsboot) needs to be updated
(gpart or other tools).
At this time, only lua loader is updated.
Sponsored by: Netflix, Klara Inc.
Differential Revision: https://reviews.freebsd.org/D25512
After OpenZFS import, zpool auto import behavior was moved to an
explicit "zpool import -a", and the zpool rc.d script was added
as a prerequisite of zvol.
However, in r299839, zvol was added as a prerequisite of dumpon,
making it to start very early and before all 'disks' providers.
At this time, dumping on a zvol is not supported, so remove this
requirement and make zpool depend on disks to allow zpool on
full disk encryption work.
Reviewed by: allanjude
Differential Revision: https://reviews.freebsd.org/D26333
prior to zvol and mountcritlocal resulting in ZVOLs (swap and
virtual machine UFS filesystems) being unavailable, leading to
boot failures.
We move the zpool import from zfs to a new zpool script, with the
-N option to avoid mounting datasets while making the ZPOOL's
datasets available for "legacy" mount (mountpoint=legacy) and ZVOLs
available for subsequent use for swap (in the zvol rc sript) or
for UFS or other filesystems in fstab(5), mounted by mountcritlocal.
Reviewed by: freqlabs (previous version)
Differential Revision: https://reviews.freebsd.org/D26185
The primary benefit is maintaining a completely shared
code base with the community allowing FreeBSD to receive
new features sooner and with less effort.
I would advise against doing 'zpool upgrade'
or creating indispensable pools using new
features until this change has had a month+
to soak.
Work on merging FreeBSD support in to what was
at the time "ZFS on Linux" began in August 2018.
I first publicly proposed transitioning FreeBSD
to (new) OpenZFS on December 18th, 2018. FreeBSD
support in OpenZFS was finally completed in December
2019. A CFT for downstreaming OpenZFS support in
to FreeBSD was first issued on July 8th. All issues
that were reported have been addressed or, for
a couple of less critical matters there are
pull requests in progress with OpenZFS. iXsystems
has tested and dogfooded extensively internally.
The TrueNAS 12 release is based on OpenZFS with
some additional features that have not yet made
it upstream.
Improvements include:
project quotas, encrypted datasets,
allocation classes, vectorized raidz,
vectorized checksums, various command line
improvements, zstd compression.
Thanks to those who have helped along the way:
Ryan Moeller, Allan Jude, Zack Welch, and many
others.
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D25872
are encountered at boot time:
rcorder: requirement `ipfs' in file `/etc/rc.d/netif' has no providers.
rcorder: requirement `ipfilter' in file `/etc/rc.d/netif' has no
providers.
rcorder: requirement `ipfilter' in file `/etc/rc.d/netwait' has no
providers.
rcorder: requirement `ipfilter' in file `/etc/rc.d/net_watchdog' has no
providers.
rcorder: requirement `ipfilter' in file `/etc/rc.d/securelevel' has no
providers.
Listing its own requrements in BEFORE rather than use REQUIRE of
non-optional scripts resolves this issue.
The issue was discovered and patched by glebius at Netflix.
Submitted by: glebius
Reported by: glebius
MFC after: 1 week
The space between words is already being echoed by the space between quoted strings:
% echo 'foo' 'bar'
foo bar
% echo 'foo' ' baz'
foo baz
Found in `ipfw` and `mountlate` messages.
PR: 247948
Submitted by: Jose Luis Duran <jlduran@gmail.com>
MFC after: 2 weeks
Sponsored by: Klara Inc.
This fixes Linux gettyname(3), with caveats (see PR).
PR: kern/240767
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D25558
aout support in ldconfig hasn't been required since FreeBSD 2.x.
Anyone still using FreeBSD 2 shared libraries can use a FreeBSD 2
ldconfig to generate aout ldconfig hints.
Reviewed by: dim, kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D24883
There are cases when gif_interfaces cannot be replaced
with cloned_interfaces, such as tunnels with external IPv6 addresses
and internal IPv4 or vice versa. Such configuration requires
extra invocation of ifconfig(8) and supported with gif_interfaces only.
MFC after: 1 week
Prior to this change, using lagg to aggregate wired and wireless networks
was broken in the (relatively common) case where wifi drivers + firmware
are loaded by devmatch, since the interface didn't exist at the time when
the lagg interface was being created.
Suggested by: imp
MFC after: 3 days
instead of MK_KERBEROS. The reason for this change is some users
prefer to build FreeBSD WITHOUT_KERBEROS, wanting to retain the
Kerberos rc scripts to start/stop MIT Kerberos or Heimdal from ports.
PR: 197337
Reported by: Adam McDougall <ebay at looksharp.net>
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D24252
The sshd service is using ssh-keygen to generate missing SSH keys.
If ssh-keygen is missing, it prints the following message:
> /etc/rc.d/sshd: WARNING: /usr/bin/ssh-keygen does not exist.
It makes sense when the key is not generated yet and
cannot be created because ssh-keygen is missing.
The problem is that even if the key is present on the host,
the sshd service would still warn about missing ssh-keygen
(even though it does not need it).
Reviewed by: emaste
Approved by: emaste (src)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D23911
rc scripts arent configuration files so use FILES instead of CONFS.
While here put rc scripts into related package (sendmail in the FreeBSD-sendmail
package, wpa_supplicant in the FreeBSD-wpa etc ...)
Reviewed by: bapt, emaste
Differential Revision: https://reviews.freebsd.org/D24177
On UFS with SU+J, sometimes fsck's default recovery from journal marks the
filesystem as clean but some errors remain.
With SU only, default fsck in preen mode sometimes thinks all errors have
been fixed but some still remain.
To address the issues above, this change adds a new config option:
fsck_flags. By default it's set to -p, but the user may change it to -y
or -f -y, for instance, to force a full fsck after a system crash.
Submitted by: jhibbits@ (original version)
Reviewed by: mckusick
Differential Revision: https://reviews.freebsd.org/D24087
nsswitch.conf for backward compatibility. This file was used
over 19 years ago, before introducing nsdispatch() in the
name-service lookup APIs.
MFC after: 3 days
autofs was introduced with FreeBSD 10.1 and is the supported method for
automounting filesystems. As of r296194 the amd man page claimed that it
is deprecated. Remove it from base now; the sysutils/am-utils port is
still available if necessary.
Discussed with: cy
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
It's faster and more reliable to wait_for_pids than to sleep 1.
cem@ suggested just to remove auditd_stop() and use the rc.subr default
stop action (SIGTERM instead of audit -t), which has a built-in
wait_for_pids. That may be a better solution.
Discussed with: cem
Reviewed by: asomers
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D23223
People use rc.conf inside vnet jails to configure networking setups.
Presumably because some sysctl were not virtualised up until r356527 the
script was not run for vnet jails leaving the rc.conf options without
effect for non-obvious reasons. Run the netoptions startup script also
for VNET jails now to make the rc.conf options work.
PR: 243193
MFC after: 2 weeks
o Remove All Rights Reserved from my notices
o imp@FreeBSD.org everywhere
o regularize punctiation, eliminate date ranges
o Make sure that it's clear that I don't claim All Rights reserved by listing
All Rights Reserved on same line as other copyright holders (but not
me). Other such holders are also listed last where it's clear.
When a system has no internet connection, or when it is configured to obtain
ntpd leapfiles from some source other than the internet, or even when the
sysadmin has decided for some reason to customize ntp.conf to eliminate use
of the leapfile, the rc.d/ntpd script emits various error messages related
to the file.
This change allows setting the rc var ntp_db_leapfile to NONE to disable all
automatic processing related to that file in rc.d/ntpd.
Differential Revision: https://reviews.freebsd.org/D22461
Each boot, regenerate /var/run/os-release based on the currently running
system. Create a /etc/os-release symlink pointing to this file (so that this
doesn't create a new reason /etc can not be mounted read-only).
This is compatible with what other systems do and is what the sysutil/os-release
port attempted to do, but in an incomplete way. Linux, Solaris and DragonFly all
implement this natively as well. The complete standard can be found at
https://www.freedesktop.org/software/systemd/man/os-release.html
Moving this to the base solves both the non-standard location problem with the
port, as well as the lack of update of this file on system update.
Bump __FreeBSD_version to 1300060
PR: 238953
Differential Revision: https://reviews.freebsd.org/D22271
to disable mounting Linux-specific filesystems under /compat/linux
when 'linux_enable' is set to YES.
Reviewed by: netchild, ian (earlier version)
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D22320
Previously the watchdog timeout message was appended to the last entry
in the "Waiting for PIDS" list, resulting in a message like
Waiting for PIDS: 31299 31296 90201 9020090 second watchdog timeout
expired. Shutdown terminated.
Print a newline to separate the watchdog timeout message. Also perform
the kill before logging or echoing the message.
PR: 241072
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
This change allows to specify a watchdog(9) timeout for a system
shutdown. The timeout is activated when the watchdogd daemon is
stopped. The idea is to a prevent any indefinite hang during late
stages of the shutdown. The feature is implemented in rc.d/watchdogd,
it builds upon watchdogd -x option.
Note that the shutdown timeout is not actiavted when the watchdogd
service is individually stopped by an operator. It is also not
activated for the 'shutdown' to the single-user mode. In those cases it
is assumed that the operator knows what they are doing and they have
means to recover the system should it hang.
Significant subchanges and implementation details:
- the argument to rc.shutdown, completely unused before, is assigned to
rc_shutdown variable that can be inspected by rc scripts
- init(8) passes "single" or "reboot" as the argument, this is not
changed
- the argument is not mandatory and if it is not set then rc_shutdown is
set to "unspecified"
- however, the default jail management scripts and jail configuration
examples have been updated to pass "jail" to rc.shutdown, just in case
- the new timeout can be set via watchdogd_shutdown_timeout rc option
- for consistency, the regular timeout can now be set via
watchdogd_timeout rc option
- watchdogd_shutdown_timeout and watchdogd_timeout override timeout
specifications in watchdogd_flags
- existing configurations, where the new rc options are not set, should
keep working as before
I am not particularly wed to any of the implementation specifics.
I am open to changing or removing any of them as long as the provided
functionality is the same (or very close) to the proposed one.
For example, I think it can be implemented without using watchdogd -x,
by means of watchdog(1) alone. In that case there would be a small
window between stopping watchdogd and running watchdog, but I think that
that is acceptable.
Reviewed by: bcr (man page changes)
MFC after: 5 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D21221
