Commit Graph

7754 Commits

Author SHA1 Message Date
Vsevolod Stakhov
976e494514 Revert the change of flowid output format. [1]
Reverse the sorting order of the interfaces addresses familise so it should be
the same as getifaddrs(3) order. [2]

Suggested by:	hrs [1], bz [2]
Approved by:	hrs, bapt
2015-02-02 19:00:18 +00:00
Vsevolod Stakhov
07a51db9e2 Style(9) fixes.
Approved by:	bapt, ae
X-MFC-With:	r278080
2015-02-02 14:37:45 +00:00
Vsevolod Stakhov
35c73e51cc Reorganize the list of addresses associated with an interface and group them
based on the address family. This should help to recognize interfaces with
multiple AF (e.g. ipv4 and ipv6) with many aliases or additional addresses. The
order of addresses inside a single group is strictly preserved.

Improve the scope_id output for AF_INET6 families, as the
current approach uses hexadecimal string that is basically the ID of an
interface, whilst this information is already depicted by getnameinfo(3) call.
Therefore, now ifconfig just prints the scope of address as it is defined in
2.4 of RFC 2373.

PR:		197270
Approved by:	bapt
MFC after:	2 weeks
2015-02-02 13:03:04 +00:00
Enji Cooper
87d352d5c6 Remove duplicate MK_ISCSI block and sort the conditional blocks so this error
won't crop up again in the future

Reported by: gjb
MFC after: 1 week
2015-02-02 10:31:35 +00:00
Edward Tomasz Napierala
da8e209f33 Fix sysctl name.
MFC after:	1 month
Sponsored by:	The FreeBSD Foundation
2015-01-27 18:27:07 +00:00
Enji Cooper
c01f300b7f Build sbin/iscontrol again if MK_ISCSI != no
MFC after: 13 days
X-MFC with: r277675
Pointyhat to: me
2015-01-26 06:29:07 +00:00
Enji Cooper
4e39505449 Add MK_HAST knob for building and installing hastd(8), et al
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
2015-01-26 06:27:07 +00:00
John Baldwin
2aa533b91d natd(8) will work with an unconfigured interface and effectively not do
anything until the interface is assigned an address.  This fixes
ipfw_nat to do the same by using an IP of INADDR_ANY instead of
aborting the nat setup if the requested interface is not yet configured.

Differential Revision:	https://reviews.freebsd.org/D1539
Reviewed by:	melifaro, glebius, gnn
MFC after:	1 week
2015-01-25 20:37:32 +00:00
Enji Cooper
18cc317233 Add MK_CCD knob for building and installing ccd(4), ccdconfig, etc
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
2015-01-25 04:52:48 +00:00
Enji Cooper
b29d6977f3 Add MK_ISCSI knob for building the iscsi initiator, iscsi daemon, kernel
modules, etc

MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
2015-01-25 04:20:11 +00:00
Enji Cooper
60e03a568c Fix building rcorder with -DDEBUG by using libutil.h instead of util.h from
usr.bin/make

MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
2015-01-25 03:08:21 +00:00
Enji Cooper
9a1f476703 - Revert r277670 (#include order is required for fparseln)
- Remove unnecessary CFLAGS+= -I now that make is no longer required to make
  rcorder build
2015-01-25 03:02:29 +00:00
Enji Cooper
6251a2629c Sort #include order 2015-01-25 02:30:44 +00:00
Enji Cooper
bfd71a93e3 MFhead @ r277659 2015-01-24 21:21:39 +00:00
Andrey V. Elsukov
ffc610b221 After r270929 RAW IP code assumes that all IP fields are in network
byte order. Fix ping(8) to pass an IP header with converted ip_off
and ip_len fields, when IP_HDRINCL socket option used.
2015-01-23 13:26:35 +00:00
Enji Cooper
51dd214c84 MFhead @ r277403 2015-01-19 22:18:00 +00:00
Alexander V. Chernikov
69c4b56a74 Eliminate incorrect IPv6 mask guessing:
RFC 2374 concept of 'IPv6 Aggregatable Global Unicast Address Format' was
deprecated by RFC 3587 12 years ago.

Before:

15:06 [1] edge# netstat -rn6 | grep 2a02:6b8::
2a02:6b8::/32                     2a02:978:2::1                 UGS         em0
15:06 [1] edge# route -6n get 2a02:6b8::
route: writing to routing socket: No such process

After:
15:07 [1] edge# /usr/obj/usr/src/sbin/route/route -n6 get 2a02:6b8::
   route to: 2a02:6b8::
destination: 2a02:6b8::
       mask: ffff:ffff::
    gateway: 2a02:978:2::1
        fib: 0
  interface: em0
      flags: <UP,GATEWAY,DONE,STATIC>
 recvpipe  sendpipe  ssthresh  rtt,msec    mtu        weight    expire
       0         0         0         0      1500         1         0

MFC after:	2 weeks
2015-01-16 11:17:30 +00:00
Edward Tomasz Napierala
01de1a0650 Add devd(8) notifications for creation and destruction of GEOM devices.
Differential Revision:	https://reviews.freebsd.org/D1211
MFC after:	1 month
Sponsored by:	The FreeBSD Foundation
2015-01-14 11:15:57 +00:00
Kenneth D. Merry
a1736be349 Improve camcontrol(8) handling of drive defect data.
This includes a new summary mode (-s) for camcontrol defects that
quickly tells the user the most important thing: how many defects
are in the requested list.  The actual location of the defects is
less important.

Modern drives frequently have more than the 8191 defects that can
be reported by the READ DEFECT DATA (10) command.  If they don't
have that many grown defects, they certainly have more than 8191
defects in the primary (i.e. factory) defect list.

The READ DEFECT DATA (12) command allows for longer parameter
lists, as well as indexing into the list of defects, and so allows
reporting many more defects.

This has been tested with HGST drives and Seagate drives, but
does not fully work with Seagate drives.  Once I have a Seagate
spec I may be able to determine whether it is possible to make it
work with Seagate drives.

scsi_da.h:	Add a definition for the new long block defect
		format.

		Add bit and mask definitions for the new extended
		physical sector and bytes from index defect
		formats.

		Add a prototype for the new scsi_read_defects() CDB
		building function.

scsi_da.c:	Add a new scsi_read_defects() CDB building function.
		camcontrol(8) was previously composing CDBs manually.
		This is long overdue.

camcontrol.c:	Revamp the camcontrol defects subcommand.  We now
		go through multiple stages in trying to get defect
		data off the drive while avoiding various drive
		firmware quirks.

		We start off by requesting the defect header with
		the 10 byte command.  If we're in summary mode (-s)
		and the drive reports fewer defects than can be
		represented in the 10 byte header, we're done.
		Otherwise, we know that we need to issue the
		12 byte command if the drive reports the maximum
		number of defects.

		If we're in summary mode, we're done if we get a
		good response back when asking for the 12 byte header.

		If the user has asked for the full list, then we
		use the address descriptor index field in the 12
		byte CDB to step through the list in 64K chunks.
		64K is small enough to work with most any ancient
		or modern SCSI controller.

		Add support for printing the new long block defect
		format, as well as the extended physical sector and
		bytes from index formats.  I don't have any drives
		that support the new formats.

		Add a hexadecimal output format that can be turned
		on with -X.

		Add a quiet mode (-q) that can be turned on with
		the summary mode (-s) to just print out a number.

		Revamp the error detection and recovery code for
		the defects command to work with HGST drives.

		Call the new scsi_read_defects() CDB building
		function instead of rolling the CDB ourselves.

		Pay attention to the residual from the defect list
		request when printing it out, so we don't run off
		the end of the list.

		Use the new scsi_nv library routines to convert
		from strings to numbers and back.

camcontrol.8:	Document the new defect formats (longblock, extbfi,
		extphys) and command line options (-q, -s, -S and
		-X) for the defects subcommand.

		Explain a little more about what drives generally
		do and don't support.

Sponsored by:	Spectra Logic
MFC after:	1 week
2015-01-08 16:58:40 +00:00
Warner Losh
a91275f72f Remove old ioctl use and support, once and for all. 2015-01-06 05:28:37 +00:00
Enji Cooper
b219c275cc Integrate sbin/ifconfig/tests from NetBSD into atf/kyua
Sponsored by: EMC / Isilon Storage Division
2015-01-04 22:25:16 +00:00
Joel Dahl
f636caf195 mdoc: paragraph improvements. 2015-01-04 12:49:24 +00:00
Dag-Erling Smørgrav
e331584127 Belatedly commit the patch for SA-14:21 to head. It was not committed to
head at the time because it's a band-aid, rather than a complete fix, but
the complete fix never materialized.
2015-01-03 01:52:06 +00:00
Enji Cooper
a4ed727666 MFhead @ r276594 2015-01-02 23:27:16 +00:00
Joel Dahl
f7e00d4bbd mdoc: remove EOL whitespace. 2014-12-29 13:50:59 +00:00
Joel Dahl
c09eb46601 mdoc: improvements to SEE ALSO. 2014-12-27 08:22:58 +00:00
Enji Cooper
afbe8aa46f MFhead @ r275911 (also, sort out MK_* flags in BMAKE, etc on this branch) 2014-12-18 18:46:08 +00:00
Gleb Kurtsou
9b33705411 Adjust printf format specifiers for dev_t and ino_t in user space.
ino_t and dev_t are about to become uint64_t.

Reviewed by:	kib, mckusick
2014-12-17 07:10:48 +00:00
Bryan Venteicher
c6e32006e1 Prefix all the vxlan ifconfig commands so they are unique
And rehook ifvxlan back into the build.
2014-12-17 05:36:34 +00:00
Andrey V. Elsukov
8150c3ec36 Add ability to not specify a zone identifier twice, when both source and
destination addresses are specified.
For example:
	# ping6 -S fe80::1%ix0 ff02::1
or
	# ping6 -S fe80::1 fe80::2%ix0

Obtained from:	Yandex LLC
Sponsored by:	Yandex LLC
2014-12-16 14:59:20 +00:00
Gleb Kurtsou
c7d73a4d23 sbin/shutdown: Support time units as in 'shutdown -r +5sec'
Units supported: s, sec, m, min, h, hour.

Differential Revision:	https://reviews.freebsd.org/D1272
2014-12-16 08:29:02 +00:00
Enji Cooper
d455aba884 MFhead @ r275688 2014-12-10 20:44:51 +00:00
Edward Tomasz Napierala
be3a49ee62 Add fstyp(8). This utility, named after its SVR4 counterpart, detects
filesystems.  It differs from file(1) in that it gives machine-parseable
output, it outputs filesystem labels, doesn't get confused by other
formats metadata, and runs in Capsicum sandbox.

Differential Revision:	https://reviews.freebsd.org/D1255
Relnotes:	yes
Sponsored by:	The FreeBSD Foundation
2014-12-10 14:14:16 +00:00
Enji Cooper
2c3f939cab MFhead @ r275589 2014-12-08 03:36:43 +00:00
Edward Tomasz Napierala
de29f585af Move iscsi.conf.5 from sbin/iscontrol/ to usr.bin/iscsictl/, as the
former is obsolete.

MFC after:	2 weeks
Sponsored by:	The FreeBSD Foundation
2014-12-05 12:38:01 +00:00
Enji Cooper
da976f9d68 MFhead @ r275496 2014-12-05 07:48:25 +00:00
Enji Cooper
210607205f Make ccd(4), et al conditional based on MK_CCD 2014-12-02 19:53:55 +00:00
Xin LI
689c8e8b46 Fix inverted logic introduced in r272154.
Noticed by:	trasz
MFC after:	2 weeks
2014-12-01 20:51:01 +00:00
Dag-Erling Smørgrav
5d083d287b Disable the vxlan code until the people reponsible for it can come up with
new command names that don't conflict with existing commands.

Pointy hat to:	bryanv
2014-12-01 12:59:16 +00:00
Enji Cooper
9779edfbd3 Remove the unnecessary glob 2014-11-30 09:04:24 +00:00
Enji Cooper
d370dc47a1 Fix CFLAGS+=-DDEBUG by using the right header for libutil (libutil.h, not
util.h)
2014-11-30 09:03:34 +00:00
Enji Cooper
317fdbc621 Build spppcontrol if MK_PPP != no 2014-11-30 08:34:46 +00:00
Enji Cooper
840e70929b MFHead @ r275232 2014-11-29 05:28:40 +00:00
Enji Cooper
66ca0717df Convert sbin/mdconfig/tests from prove format tests to ATF format tests
As a side effect...
1. The tests now checks for the root user before continuing with kyua, which is
   more visible than the test being skipped with the TAP protocol
2. The tests work with devices that aren't /dev/md0 by caching the device
   attached during the test to a file, and later use the cached information to
   detach the device in the cleanup routine
3. The tests no longer require perl to run

MFC after: 1 week
PR: 191191
Sponsored by: EMC / Isilon Storage Division
2014-11-27 06:04:00 +00:00
Enji Cooper
466046ec0d Conditionalize a number of components in the tree
- bootparamd
- bootpd
- finger/fingerd
- ftp/ftpd
- hastctl/hastd
- iscsid, et al
- rbootd
- talk/talkd
- tcpd, et al
- tftp/tftpd

Add src.conf entries for the various components and do a best effort
at adding components to tools/build/mk/OptionalObsoleteFiles.inc
2014-11-26 08:44:05 +00:00
Baptiste Daroussin
13eb765f2d Convert sbin/ to LIBADD
Reduce overlinking
2014-11-25 11:23:12 +00:00
Joel Dahl
d4d112e34a Misc mdoc fixes:
- Remove superfluous paragraph macros.
- Remove/fix empty or incorrect macros.
- Sort sections into conventional order.
- Terminate quoted strings properly.
- Remove EOL whitespace.
2014-11-23 21:00:00 +00:00
Edward Tomasz Napierala
a0252a0a82 Cross-reference autounmountd(8) from umount(8).
MFC after:	1 month
Sponsored by:	The FreeBSD Foundation
2014-11-22 16:46:00 +00:00
Edward Tomasz Napierala
9df66c85e3 Cross-reference automount(8) from mount(8).
MFC after:	1 month
Sponsored by:	The FreeBSD Foundation
2014-11-22 16:43:36 +00:00
Warner Losh
009ad003a2 Recommit r274750. 2014-11-21 01:43:55 +00:00