- Add no_dad and ignoreloop per-IF knob. no_dad disables DAD completely,
and ignoreloop is to prevent infinite loop in loopback probing state when
loopback is permanently expected.
When several threads are trying to send datagram to the same destination,
but fragmentation is disabled and datagram size exceeds link MTU,
ip6_output() calls pfctlinput2(PRC_MSGSIZE). It does notify all
sockets wanted to know MTU to this destination. And since all threads
hold PCB lock while sending, taking the lock for each PCB in the
in6_pcbnotify() leads to deadlock.
RFC 3542 p.11.3 suggests notify all application wanted to receive
IPV6_PATHMTU ancillary data for each ICMPv6 packet too big message.
But it doesn't require this, when we don't receive ICMPv6 message.
Change ip6_notify_pmtu() function to be able use it directly from
ip6_output() to notify only one socket, and to notify all sockets
when ICMPv6 packet too big message received.
PR: 197059
Differential Revision: https://reviews.freebsd.org/D1949
Reviewed by: no objection from #network
Obtained from: Yandex LLC
MFC after: 1 week
Sponsored by: Yandex LLC
to initialize mbuf's fibnum. Uninitialized fibnum value can lead to
panic in the routing code. Currently we use only RT_DEFAULT_FIB value
for initialization.
Differential Revision: https://reviews.freebsd.org/D1998
Reviewed by: hrs (previous version)
Sponsored by: Yandex LLC
draft-ietf-6man-enhanced-dad-13.
This basically adds a random nonce option (RFC 3971) to NS messages
for DAD probe to detect a looped back packet. This looped back packet
prevented DAD on some pseudo-interfaces which aggregates multiple L2 links
such as lagg(4).
The length of the nonce is set to 6 bytes. This algorithm can be disabled by
setting net.inet6.ip6.dad_enhanced sysctl to 0 in a per-vnet basis.
Reported by: hiren
Reviewed by: ae
Differential Revision: https://reviews.freebsd.org/D1835
represents a context.
- Preserve name 'struct mld_ifinfo' for a new structure, that will be stable
API between userland and kernel.
- Make sysctl_mld_ifinfo() return the new 'struct mld_ifinfo', instead of
old one, which had a bunch of internal kernel structures in it.
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
and arp were being used. They basically would pass in the
mutex to the callout_init. Because they used this method
to the callout system, it was possible to "stop" the callout.
When flushing the table and you stopped the running callout, the
callout_stop code would return 1 indicating that it was going
to stop the callout (that was about to run on the callout_wheel blocked
by the function calling the stop). Now when 1 was returned, it would
lower the reference count one extra time for the stopped timer, then
a few lines later delete the memory. Of course the callout_wheel was
stuck in the lock code and would then crash since it was accessing
freed memory. By using callout_init(c, 1) we always get a 0 back
and the reference counting bug does not rear its head. We do have
to make a few adjustments to the callouts themselves though to make
sure it does the proper thing if rescheduled as well as gets the lock.
Commented upon by hiren and sbruno
See Phabricator D1777 for more details.
Commented upon by hiren and sbruno
Reviewed by: adrian, jhb and bz
Sponsored by: Netflix Inc.
bits.
The motivation here is to eventually teach netisr and potentially
other networking subsystems a bit more about how RSS work queues / buckets
are configured so things have a hope of auto-configuring in the future.
* net/rss_config.[ch] takes care of the generic bits for doing
configuration, hash function selection, etc;
* topelitz.[ch] is now in net/ rather than netinet/;
* (and would be in libkern if it didn't directly include RSS_KEYSIZE;
that's a later thing to fix up.)
* netinet/in_rss.[ch] now just contains the IPv4 specific methods;
* and netinet/in6_rss.[ch] now just contains the IPv6 specific methods.
This should have no functional impact on anyone currently using
the RSS support.
Differential Revision: D1383
Reviewed by: gnn, jfv (intel driver bits)
use ifqueue at all. Second, there is no point in this lockless check.
Either positive or negative result of the check could be incorrect after
a tick.
Sponsored by: Nginx, Inc.
handle it in arc_output() instead of nd6_storelladdr().
* Remove IFT_ARCNET check from arpresolve() since arc_output() does not
use arpresolve() to handle broadcast/multicast. This check was there
since r84931. It looks like it was not used since r89099 (initial
import of Arcnet support where multicast is handled separately).
* Remove IFT_IEEE1394 case from nd6_storelladdr() since firewire_output()
calles nd6_storelladdr() for unicast addresses only.
* Remove IFT_ARCNET case from nd6_storelladdr() since arc_output() now
handles multicast by itself.
As a result, we have the following pattern: all non-ethernet-style
media have their own multicast map handling inside their appropriate
routines. On the other hand, arpresolve() (and nd6_storelladdr()) which
meant to be 'generic' ones de-facto handles ethernet-only multicast maps.
MFC after: 3 weeks
hold mbuf chain instead of calling full-blown nd6_output_lle()
for each packet. This simplifies both callers and nd6_output_lle()
implementation.
* Make nd6_output_lle() static and remove now-unused lle and chain
arguments.
* Rename nd6_output_flush() -> nd6_flush_holdchain() to be consistent.
* Move all pre-send transmit hooks to newly-created nd6_output_ifp().
Now nd6_output(), nd6_output_lle() and nd6_flush_holdchain() are using
it to send mbufs to if_output.
* Remove SeND hook from nd6_na_input() because it was implemented
incorrectly since the beginning (r211501):
- it tagged initial input mbuf (m) instead of m_hold
- tagging _all_ mbufs in holdchain seems to be wrong anyway.
the knowledge of mbuf layout, and in particular constants such as M_EXT,
MLEN, MHLEN, and so on, in mbuf consumers by unifying various alignment
utility functions (M_ALIGN(), MH_ALIGN(), MEXT_ALIGN() in a single
M_ALIGN() macro, implemented by a now-inlined m_align() function:
- Move m_align() from uipc_mbuf.c to mbuf.h; mark as __inline.
- Reimplement M_ALIGN(), MH_ALIGN(), and MEXT_ALIGN() using m_align().
- Update consumers around the tree to simply use M_ALIGN().
This change eliminates a number of cases where mbuf consumers must be aware
of whether or not mbufs returned by the allocator use external storage, but
also assumptions about the size of the returned mbuf. This will make it
easier to introduce changes in how we use external storage, as well as
features such as variable-size mbufs.
Differential Revision: https://reviews.freebsd.org/D1436
Reviewed by: glebius, trasz, gnn, bz
Sponsored by: EMC / Isilon Storage Division
rather than passing them in by value.
The eventual aim is to do incremental hash construction rather than
all of the memcpy()'ing into a contiguous buffer for the hash
function, which does show up as taking quite a bit of CPU during
profiling.
Tested:
* a variety of laptops/desktop setups I have, with v6 connectivity
Differential Revision: D1404
Reviewed by: bz, rpaulo
ipsec6_in_reject() does the same things, also it counts policy violation
errors.
Do IPSEC check in the ip6_forward() after addresses checks.
Also use ip6_ipsec_fwd() to make code similar to IPv4 implementation.
Obtained from: Yandex LLC
Sponsored by: Yandex LLC
ipsec_getpolicybyaddr()
ipsec4_checkpolicy()
ip_ipsec_output()
ip6_ipsec_output()
The only flag used here was IP_FORWARDING.
Obtained from: Yandex LLC
Sponsored by: Yandex LLC
Remove check for presence PACKET_TAG_IPSEC_IN_DONE mbuf tag from
ip_ipsec_fwd(). PACKET_TAG_IPSEC_IN_DONE tag means that packet is
already handled by IPSEC code. This means that before IPSEC processing
it was destined to our address and security policy was checked in
the ip_ipsec_input(). After IPSEC processing packet has new IP
addresses and destination address isn't our own. So, anyway we can't
check security policy from the mbuf tag, because it corresponds
to different addresses.
We should check security policy that corresponds to packet
attributes in both cases - when it has a mbuf tag and when it has not.
Obtained from: Yandex LLC
Sponsored by: Yandex LLC
security policy. The changed block of code in ip*_ipsec_input() is
called when packet has ESP/AH header. Presence of
PACKET_TAG_IPSEC_IN_DONE mbuf tag in the same time means that
packet was already handled by IPSEC and reinjected in the netisr,
and it has another ESP/AH headers (encrypted twice?).
Since it was already processed by IPSEC code, the AH/ESP headers
was already stripped (and probably outer IP header was stripped too)
and security policy from the tdb_ident was applied to those headers.
It is incorrect to apply this security policy to current headers.
Also make ip_ipsec_input() prototype similar to ip6_ipsec_input().
Obtained from: Yandex LLC
Sponsored by: Yandex LLC
PACKET_TAG_IPSEC_OUT_CRYPTO_NEEDED mbuf tags. They aren't used in FreeBSD.
Instead check presence of PACKET_TAG_IPSEC_OUT_DONE mbuf tag. If it
is found, bypass security policy lookup as described in the comment.
PACKET_TAG_IPSEC_OUT_DONE tag added to mbuf when IPSEC code finishes
ESP/AH processing. Since it was already finished, this means the security
policy placed in the tdb_ident was already checked. And there is no reason
to check it again here.
Obtained from: Yandex LLC
Sponsored by: Yandex LLC
number of races which could cause double frees or use-after-frees when
performing DAD on an address. In particular, an IPv6 address can now only be
marked as a duplicate from the DAD callout.
Differential Revision: https://reviews.freebsd.org/D1258
Reviewed by: ae, hrs
Reported by: rstone
MFC after: 1 month
from the FreeBSD network code. The flag is still kept around in the
"sys/mbuf.h" header file, but does no longer have any users. Instead
the "m_pkthdr.rsstype" field in the mbuf structure is now used to
decide the meaning of the "m_pkthdr.flowid" field. To modify the
"m_pkthdr.rsstype" field please use the existing "M_HASHTYPE_XXX"
macros as defined in the "sys/mbuf.h" header file.
This patch introduces new behaviour in the transmit direction.
Previously network drivers checked if "M_FLOWID" was set in "m_flags"
before using the "m_pkthdr.flowid" field. This check has now now been
replaced by checking if "M_HASHTYPE_GET(m)" is different from
"M_HASHTYPE_NONE". In the future more hashtypes will be added, for
example hashtypes for hardware dedicated flows.
"M_HASHTYPE_OPAQUE" indicates that the "m_pkthdr.flowid" value is
valid and has no particular type. This change removes the need for an
"if" statement in TCP transmit code checking for the presence of a
valid flowid value. The "if" statement mentioned above is now a direct
variable assignment which is then later checked by the respective
network drivers like before.
Additional notes:
- The SCTP code changes will be committed as a separate patch.
- Removal of the "M_FLOWID" flag will also be done separately.
- The FreeBSD version has been bumped.
MFC after: 1 month
Sponsored by: Mellanox Technologies
Update route MTU in case of ifnet MTU change.
Add new RTF_FIXEDMTU to track explicitly specified MTU.
Old behavior:
ifconfig em0 mtu 1500->9000 -> all routes traversing em0 do not change MTU.
User has to manually update all routes.
ifconfig em0 mtu 9000->1500 -> all routes traversing em0 do not change MTU.
However, if ip[6]_output finds route with rt_mtu > interface mtu, rt_mtu
gets updated.
New behavior:
ifconfig em0 mtu 1500->9000 -> all interface routes in all fibs gets updated
with new MTU unless RTF_FIXEDMTU flag set on them.
ifconfig em0 mtu 9000->1500 -> all routes in all fibs gets updated with new
MTU unless RTF_FIXEDMTU flag set on them AND rt_mtu is less than ifp mtu.
route add ... -mtu XXX automatically sets RTF_FIXEDMTU flag.
route change .. -mtu 0 automatically removes RTF_FIXEDMTU flag.
PR: 194238
MFC after: 1 month
CR: D1125
Initially in_matrote() in_clsroute() in their current state was introduced by
r4105 20 years ago. Instead of deleting inactive routes immediately, we kept them
in route table, setting RTPRF_OURS flag and some expire time. After that, either
GC came or RTPRF_OURS got removed on first-packet. It was a good solution
in that days (and probably another decade after that) to keep TCP metrics.
However, after moving metrics to TCP hostcache in r122922, most of in_rmx
functionality became unused. It might had been used for flushing icmp-originated
routes before rte mutexes/refcounting, but I'm not sure about that.
So it looks like this is nearly impossible to make GC do its work nowadays:
in_rtkill() ignores non-RTPRF_OURS routes.
route can only become RTPRF_OURS after dropping last reference via rtfree()
which calls in_clsroute(), which, it turn, ignores UP and non-RTF_DYNAMIC routes.
Dynamic routes can still be installed via received redirect, but they
have default lifetime (no specific rt_expire) and no one has another trie walker
to call RTFREE() on them.
So, the changelist:
* remove custom rnh_match / rnh_close matching function.
* remove all GC functions
* partially revert r256695 (proto3 is no more used inside kernel,
it is not possible to use rt_expire from user point of view, proto3 support
is not complete)
* Finish r241884 (similar to this commit) and remove remaining IPv6 parts
MFC after: 1 month
