Commit Graph

38 Commits

Author SHA1 Message Date
Luigi Rizzo
b715f178c6 Last bits (i think) of dummynet for -current. 1998-12-14 18:09:13 +00:00
Garrett Wollman
cfe8b629f1 Yow! Completely change the way socket options are handled, eliminating
another specialized mbuf type in the process.  Also clean up some
of the cruft surrounding IPFW, multicast routing, RSVP, and other
ill-explored corners.
1998-08-23 03:07:17 +00:00
Julian Elischer
f9e354df42 Support for IPFW based transparent forwarding.
Any packet that can be matched by a ipfw rule can be redirected
transparently to another port or machine. Redirection to another port
mostly makes sense with tcp, where a session can be set up
between a proxy and an unsuspecting client. Redirection to another machine
requires that the other machine also be expecting to receive the forwarded
packets, as their headers will not have been modified.

/sbin/ipfw must be recompiled!!!

Reviewed by:	Peter Wemm <peter@freebsd.org>
Submitted by: Chrisy Luke <chrisy@flix.net>
1998-07-06 03:20:19 +00:00
Julian Elischer
3ed81d03b3 Fix wrong data type for a pointer. 1998-06-06 20:45:28 +00:00
Julian Elischer
c977d4c735 clean up the changes made to ipfw over the last weeks
(should make the ipfw lkm work again)
1998-06-06 19:39:10 +00:00
David Greenman
1f91d8c563 Added fast IP forwarding code by Matt Thomas <matt@3am-software.com> via
NetBSD, ported to FreeBSD by Pierre Beyssac <pb@fasterix.freenix.org> and
minorly tweaked by me.
This is a standard part of FreeBSD, but must be enabled with:
"sysctl -w net.inet.ip.fastforwarding=1" ...and of course forwarding must
also be enabled. This should probably be modified to use the zone
allocator for speed and space efficiency. The current algorithm also
appears to lose if the number of active paths exceeds IPFLOW_MAX (256),
in which case it wastes lots of time trying to figure out which cache
entry to drop.
1998-05-19 14:04:36 +00:00
John Birrell
fac6d93b19 Treat all internet addresses as u_int32_t. 1998-05-10 20:51:46 +00:00
Poul-Henning Kamp
4565cbea29 According to:
ftp://ftp.isi.edu/in-notes/iana/assignments/port-numbers

port numbers are divided into three ranges:

	    0 -  1023 Well Known Ports
	 1024 - 49151 Registered Ports
	49152 - 65535 Dynamic and/or Private Ports

This patch changes the "local port range" from 40000-44999
to the range shown above (plus fix the comment in in_pcb.c).

WARNING: This may have an impact on firewall configurations!

PR:		5402
Reviewed by:	phk
Submitted by:	Stephen J. Roznowski <sjr@home.net>
1998-04-19 17:22:30 +00:00
Julian Elischer
47f049d7d9 OOPs typo TCF, not TCP.... 1998-02-25 02:35:35 +00:00
Julian Elischer
cfaa93b26b Bring our in.h up to date with respect to allocated
IP protocol numbers. It is possible that the names may require tuning,
but the numbers represent what is in rfc1700 which is the present
active RFC.
1998-02-25 02:14:03 +00:00
Guido van Rooij
4fce58048d Add new sysctl variable: net.inet.ip.accept_sourceroute
It controls if the system is to accept source routed packets.
It used to be such that, no matter if the setting of net.inet.ip.sourceroute,
source routed packets destined at us would be accepted. Now it is
controllable with eth default set to NOT accept those.
1998-02-16 19:23:58 +00:00
Garrett Wollman
6fce01c990 Export ipstat via sysctl. Don't understand why this wasn't done before. 1997-09-25 00:34:35 +00:00
Peter Wemm
6875d25465 Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not
ready for it yet.
1997-02-22 09:48:43 +00:00
Jordan K. Hubbard
1130b656e5 Make the long-awaited change from $Id$ to $FreeBSD$
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.

Boy, I'm glad we're not using sup anymore.  This update would have been
insane otherwise.
1997-01-14 07:20:47 +00:00
Peter Wemm
c922550c95 Add INADDR_LOOPBACK, moved from <rpc/rpc.h> 1996-12-30 15:34:17 +00:00
Bill Fenner
82c23eba89 Add the IP_RECVIF socket option, which supplies a packet's incoming interface
using a sockaddr_dl.

Fix the other packet-information socket options (SO_TIMESTAMP, IP_RECVDSTADDR)
to work for multicast UDP and raw sockets as well.  (They previously only
worked for unicast UDP).
1996-11-11 04:56:32 +00:00
Søren Schmidt
6713d4a747 Changed args to the nat functions. 1996-10-22 22:26:02 +00:00
Alexander Langer
af44ef0a2f Reword two comments. 1996-10-19 20:23:12 +00:00
Søren Schmidt
fed1c7e9e4 Add hooks for an IP NAT module, much like the firewall stuff...
Move the sockopt definitions for the firewall code from
ip_fw.h to in.h where it belongs.
1996-08-21 21:37:07 +00:00
Peter Wemm
bbd42ad0e5 Add two more portrange sysctls, which control the area of the below
IPPORT_RESERVED that is used for selection when bind() is told to allocate
a reserved port.

Also, implement simple sanity checking for all the addresses set, to make
it a little harder for a user/sysadmin to shoot themselves in the feet.
1996-08-12 14:05:54 +00:00
Julian Elischer
93e0e11657 Adding changes to ipfw and the kernel to support ip packet diversion..
This stuff should not be too destructive if the IPDIVERT is not compiled in..
 be aware that this changes the size of the ip_fw struct
so ipfw needs to be recompiled to use it.. more changes coming to clean this up.
1996-07-10 19:44:30 +00:00
Poul-Henning Kamp
23bf99538c Add feature for tcp "established".
Change interface between netinet and ip_fw to be more general, and thus
hopefully also support other ip filtering implementations.
1996-04-03 13:52:20 +00:00
Bill Fenner
49fa849bc8 IGMPv2 routines rewritten, to be more compact and to fully comply
with the IGMPv2 Internet Draft (including Router Alert IP option)
1996-03-14 16:59:20 +00:00
Peter Wemm
33b3ac0633 Make the default behavior of local port assignment match traditional
systems (my last change did not mix well with some firewall
configurations).  As much as I dislike firewalls, this is one thing I
I was not prepared to break by default.. :-)

Allow the user to nominate one of three ranges of port numbers as
candidates for selecting a local address to replace a zero port number.
The ranges are selected via a setsockopt(s, IPPROTO_IP, IP_PORTRANGE, &arg)
call.  The three ranges are: default, high (to bypass firewalls) and
low (to get a port below 1024).

The default and high port ranges are sysctl settable under sysctl
net.inet.ip.portrange.*

This code also fixes a potential deadlock if the system accidently ran out
of local port addresses. It'd drop into an infinite while loop.

The secure port selection (for root) should reduce overheads and increase
reliability of rlogin/rlogind/rsh/rshd if they are modified to take
advantage of it.

Partly suggested by: pst
Reviewed by: wollman
1996-02-22 21:32:23 +00:00
Peter Wemm
101f9fc846 Change the default local address range for IP from 1024 through 5000
to 20000 through 30000.  These numbers are used for local IP port numbers
when an explicit address is not specified.

The values are sysctl modifiable under: net.inet.ip.port_{first|last}_auto

These numbers do not overlap with any known server addresses, without going
above 32768 which are "negative" on some other implementations.

20000 through 30000 is 2.5 times larger than the old range, but some have
suggested even that may not be enough... (gasp!)  Setting a low address
of 10000 should be plenty.. :-)
1996-01-19 08:00:58 +00:00
Poul-Henning Kamp
0312fbe97d New style sysctl & staticize alot of stuff. 1995-11-14 20:34:56 +00:00
Garrett Wollman
054ef37088 Instrument the IP input queue with two new read-only MIB entries:
net.inet.ip.intr-queue-maxlen (=== ipintrq.ifq_maxlen)
and	net.inet.ip.intr-queue-drops (=== ipintrq.ifq_drops)

There should probably be a standard way of getting the same information
going the other way.
1995-11-01 17:18:27 +00:00
Peter Wemm
42c03a52ba Change the compile-time option of DIRECTED_BROADCAST into a sysctl
variable underneath ip, "directed-broadcast".
Reviewed by:	David Greenman
Obtained from:	NetBSD, by Darren Reed.
1995-07-18 09:56:44 +00:00
Garrett Wollman
1c5de19afb Kernel side of 3.5 multicast routing code, based on work by Bill Fenner
and other work done here.  The LKM support is probably broken, but it
still compiles and will be fixed later.
1995-06-13 17:51:16 +00:00
Garrett Wollman
1025071f85 Reject source routes unless configured on by administrator. 1995-03-16 18:22:28 +00:00
Garrett Wollman
ef0cdf3329 Add inet_ntoa() and replace ARP's private routine with same. 1995-03-16 17:32:27 +00:00
Garrett Wollman
ea80aed1a9 Attempt to make the host route cache a bit smarter under conditions of
high load:

	1) If there ever get to be more than net.inet.ip.rtmaxcache entries
	   in the cache, in_rtqtimo() will reduce net.inet.ip.rtexpire by
	   1/3 and do another round, unles net.inet.ip.rtexpire is less than
	   net.inet.ip.rtminexpire, and never more than once in ten minutes
	   (rtq_timeout).

	2) If net.inet.ip.rtexpire is set to zero, don't bother to cache
	   anything.
1995-02-14 23:04:52 +00:00
Garrett Wollman
3c896bda76 Correct sysctl info so that net.inet.ip.rtexpire is actually accessible. 1994-12-21 17:23:59 +00:00
Garrett Wollman
5be2baf843 Make rtq_reallyold user-configurable via sysctl. 1994-12-14 19:06:37 +00:00
Garrett Wollman
f0068c4a70 Initial get-the-easy-case-working upgrade of the multicast code
to something more recent than the ancient 1.2 release contained in
4.4.  This code has the following advantages as compared to
previous versions (culled from the README file for the SunOS release):

- True multicast delivery
- Configurable rate-limiting of forwarded multicast traffic on each
  physical interface or tunnel, using a token-bucket limiter.
- Simplistic classification of packets for prioritized dropping.
- Administrative scoping of multicast address ranges.
- Faster detection of hosts leaving groups.
- Support for multicast traceroute (code not yet available).
- Support for RSVP, the Resource Reservation Protocol.

What still needs to be done:

- The multicast forwarder needs testing.
- The multicast routing daemon needs to be ported.
- Network interface drivers need to have the `#ifdef MULTICAST' goop ripped
  out of them.
- The IGMP code should probably be bogon-tested.

Some notes about the porting process:

In some cases, the Berkeley people decided to incorporate functionality from
later releases of the multicast code, but then had to do things differently.
As a result, if you look at Deering's patches, and then look at
our code, it is not always obvious whether the patch even applies.  Let
the reader beware.

I ran ip_mroute.c through several passes of `unifdef' to get rid of
useless grot, and to permanently enable the RSVP support, which we will
include as standard.

Ported by: 	Garrett Wollman
Submitted by:	Steve Deering and Ajit Thyagarajan (among others)
1994-09-06 22:42:31 +00:00
Paul Richards
707f139edb Made idempotent.
Submitted by:	Paul
1994-08-21 05:27:42 +00:00
David Greenman
3c4dd3568f Added $Id$ 1994-08-02 07:55:43 +00:00
Rodney W. Grimes
df8bae1de4 BSD 4.4 Lite Kernel Sources 1994-05-24 10:09:53 +00:00