'buf' is inconvenient and has lead me to some irritating to discover
bugs over the years. It also makes it more challenging to refactor
the buf allocation system.
- Move swbuf and declare it as an extern in vfs_bio.c. This is still
not perfect but better than it was before.
- Eliminate the unused ffs function that relied on knowledge of the buf
array.
- Move the shutdown code that iterates over the buf array into vfs_bio.c.
Reviewed by: kib
Sponsored by: EMC / Isilon Storage Division
Assume that a vnode is mapped shared and mlocked(), and then the vnode
is truncated, or truncated and then again extended past the mapping
point EOF. Truncation removes the pages past the truncation point,
and if pages are later created at this range, they are not properly
mapped into the mlocked region, and their wiring count is wrong.
The revert leaves the invalidated but wired pages on the object queue,
which means that the pages are found by vm_object_unwire() when the
mapped range is munlock()ed, and reused by the buffer cache when the
vnode is extended again.
The changes in r173708 were required since then vm_map_unwire() looked
at the page tables to find the page to unwire. This is no longer
needed with the vm_object_unwire() introduction, which follows the
objects shadow chain.
Also eliminate OBJPR_NOTWIRED flag for vm_object_page_remove(), which
is now redundand, we do not remove wired pages.
Reported by: trasz, Dmitry Sivachenko <trtrmitya@gmail.com>
Suggested and reviewed by: alc
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
- Use pointer assignment rather than a combination of pointers and
flags to switch buffers between unmapped and mapped. This eliminates
multiple flags and generally simplifies the logic.
- Eliminate b_saveaddr since it is only used with pager bufs which have
their b_data re-initialized on each allocation.
- Gather up some convenience routines in the buffer cache for
manipulating buf space and buf malloc space.
- Add an inline, buf_mapped(), to standardize checks around unmapped
buffers.
In collaboration with: mlaier
Reviewed by: kib
Tested by: pho (many small revisions ago)
Sponsored by: EMC / Isilon Storage Division
This is based on work done by jeff@ and jhb@, as well as the numa.diff
patch that has been circulating when someone asks for first-touch NUMA
on -10 or -11.
* Introduce a simple set of VM policy and iterator types.
* tie the policy types into the vm_phys path for now, mirroring how
the initial first-touch allocation work was enabled.
* add syscalls to control changing thread and process defaults.
* add a global NUMA VM domain policy.
* implement a simple cascade policy order - if a thread policy exists, use it;
if a process policy exists, use it; use the default policy.
* processes inherit policies from their parent processes, threads inherit
policies from their parent threads.
* add a simple tool (numactl) to query and modify default thread/process
policities.
* add documentation for the new syscalls, for numa and for numactl.
* re-enable first touch NUMA again by default, as now policies can be
set in a variety of methods.
This is only relevant for very specific workloads.
This doesn't pretend to be a final NUMA solution.
The previous defaults in -HEAD (with MAXMEMDOM set) can be achieved by
'sysctl vm.default_policy=rr'.
This is only relevant if MAXMEMDOM is set to something other than 1.
Ie, if you're using GENERIC or a modified kernel with non-NUMA, then
this is a glorified no-op for you.
Thank you to Norse Corp for giving me access to rather large
(for FreeBSD!) NUMA machines in order to develop and verify this.
Thank you to Dell for providing me with dual socket sandybridge
and westmere v3 hardware to do NUMA development with.
Thank you to Scott Long at Netflix for providing me with access
to the two-socket, four-domain haswell v3 hardware.
Thank you to Peter Holm for running the stress testing suite
against the NUMA branch during various stages of development!
Tested:
* MIPS (regression testing; non-NUMA)
* i386 (regression testing; non-NUMA GENERIC)
* amd64 (regression testing; non-NUMA GENERIC)
* westmere, 2 socket (thankyou norse!)
* sandy bridge, 2 socket (thankyou dell!)
* ivy bridge, 2 socket (thankyou norse!)
* westmere-EX, 4 socket / 1TB RAM (thankyou norse!)
* haswell, 2 socket (thankyou norse!)
* haswell v3, 2 socket (thankyou dell)
* haswell v3, 2x18 core (thankyou scott long / netflix!)
* Peter Holm ran a stress test suite on this work and found one
issue, but has not been able to verify it (it doesn't look NUMA
related, and he only saw it once over many testing runs.)
* I've tested bhyve instances running in fixed NUMA domains and cpusets;
all seems to work correctly.
Verified:
* intel-pcm - pcm-numa.x and pcm-memory.x, whilst selecting different
NUMA policies for processes under test.
Review:
This was reviewed through phabricator (https://reviews.freebsd.org/D2559)
as well as privately and via emails to freebsd-arch@. The git history
with specific attributes is available at https://github.com/erikarn/freebsd/
in the NUMA branch (https://github.com/erikarn/freebsd/compare/local/adrian_numa_policy).
This has been reviewed by a number of people (stas, rpaulo, kib, ngie,
wblock) but not achieved a clear consensus. My hope is that with further
exposure and testing more functionality can be implemented and evaluated.
Notes:
* The VM doesn't handle unbalanced domains very well, and if you have an overly
unbalanced memory setup whilst under high memory pressure, VM page allocation
may fail leading to a kernel panic. This was a problem in the past, but it's
much more easily triggered now with these tools.
* This work only controls the path through vm_phys; it doesn't yet strongly/predictably
affect contigmalloc, KVA placement, UMA, etc. So, driver placement of memory
isn't really guaranteed in any way. That's next on my plate.
Sponsored by: Norse Corp, Inc.; Dell
However, I've observed the active queue scan stopping when there are
frequent free page shortages and the inactive queue is steadily refilled
by other mechanisms, such as the sequential access heuristic in vm_fault()
or madvise(2). To remedy this problem, record the time of the last active
queue scan, and always scan a number of pages proportional to the time
since the last scan, regardless of whether that last scan was a
timeout-triggered ("pass == 0") or free-page-shortage-triggered ("pass >
0") scan.
Also, on a timeout-triggered scan, allow a full scan of the active queue
when the system is short of inactive pages.
Reviewed by: kib
MFC after: 6 weeks
Sponsored by: EMC / Isilon Storage Division
user address when ABI uses shared page.
Note that the change is no-op for correctness, since shared page does
not fault. The mapping for the shared page is installed at the
address space creation, the page is unmanaged and its pte/pv entry
cannot be reclaimed.
Submitted by: Oliver Pinter
Review: https://reviews.freebsd.org/D2954
MFC after: 1 week
* GENERAL
- Update copyright.
- Make kernel options for RANDOM_YARROW and RANDOM_DUMMY. Set
neither to ON, which means we want Fortuna
- If there is no 'device random' in the kernel, there will be NO
random(4) device in the kernel, and the KERN_ARND sysctl will
return nothing. With RANDOM_DUMMY there will be a random(4) that
always blocks.
- Repair kern.arandom (KERN_ARND sysctl). The old version went
through arc4random(9) and was a bit weird.
- Adjust arc4random stirring a bit - the existing code looks a little
suspect.
- Fix the nasty pre- and post-read overloading by providing explictit
functions to do these tasks.
- Redo read_random(9) so as to duplicate random(4)'s read internals.
This makes it a first-class citizen rather than a hack.
- Move stuff out of locked regions when it does not need to be
there.
- Trim RANDOM_DEBUG printfs. Some are excess to requirement, some
behind boot verbose.
- Use SYSINIT to sequence the startup.
- Fix init/deinit sysctl stuff.
- Make relevant sysctls also tunables.
- Add different harvesting "styles" to allow for different requirements
(direct, queue, fast).
- Add harvesting of FFS atime events. This needs to be checked for
weighing down the FS code.
- Add harvesting of slab allocator events. This needs to be checked for
weighing down the allocator code.
- Fix the random(9) manpage.
- Loadable modules are not present for now. These will be re-engineered
when the dust settles.
- Use macros for locks.
- Fix comments.
* src/share/man/...
- Update the man pages.
* src/etc/...
- The startup/shutdown work is done in D2924.
* src/UPDATING
- Add UPDATING announcement.
* src/sys/dev/random/build.sh
- Add copyright.
- Add libz for unit tests.
* src/sys/dev/random/dummy.c
- Remove; no longer needed. Functionality incorporated into randomdev.*.
* live_entropy_sources.c live_entropy_sources.h
- Remove; content moved.
- move content to randomdev.[ch] and optimise.
* src/sys/dev/random/random_adaptors.c src/sys/dev/random/random_adaptors.h
- Remove; plugability is no longer used. Compile-time algorithm
selection is the way to go.
* src/sys/dev/random/random_harvestq.c src/sys/dev/random/random_harvestq.h
- Add early (re)boot-time randomness caching.
* src/sys/dev/random/randomdev_soft.c src/sys/dev/random/randomdev_soft.h
- Remove; no longer needed.
* src/sys/dev/random/uint128.h
- Provide a fake uint128_t; if a real one ever arrived, we can use
that instead. All that is needed here is N=0, N++, N==0, and some
localised trickery is used to manufacture a 128-bit 0ULLL.
* src/sys/dev/random/unit_test.c src/sys/dev/random/unit_test.h
- Improve unit tests; previously the testing human needed clairvoyance;
now the test will do a basic check of compressibility. Clairvoyant
talent is still a good idea.
- This is still a long way off a proper unit test.
* src/sys/dev/random/fortuna.c src/sys/dev/random/fortuna.h
- Improve messy union to just uint128_t.
- Remove unneeded 'static struct fortuna_start_cache'.
- Tighten up up arithmetic.
- Provide a method to allow eternal junk to be introduced; harden
it against blatant by compress/hashing.
- Assert that locks are held correctly.
- Fix the nasty pre- and post-read overloading by providing explictit
functions to do these tasks.
- Turn into self-sufficient module (no longer requires randomdev_soft.[ch])
* src/sys/dev/random/yarrow.c src/sys/dev/random/yarrow.h
- Improve messy union to just uint128_t.
- Remove unneeded 'staic struct start_cache'.
- Tighten up up arithmetic.
- Provide a method to allow eternal junk to be introduced; harden
it against blatant by compress/hashing.
- Assert that locks are held correctly.
- Fix the nasty pre- and post-read overloading by providing explictit
functions to do these tasks.
- Turn into self-sufficient module (no longer requires randomdev_soft.[ch])
- Fix some magic numbers elsewhere used as FAST and SLOW.
Differential Revision: https://reviews.freebsd.org/D2025
Reviewed by: vsevolod,delphij,rwatson,trasz,jmg
Approved by: so (delphij)
o Provide an extensive set of assertions for input array of pages.
o Remove now duplicate assertions from different pagers.
Sponsored by: Nginx, Inc.
Sponsored by: Netflix
they coould be dirty. Move the handling if the invalid pages in the
inactive scan earlier.
Remove some code duplication in the scan by introducing the
'drop_page' label, which centralizes the object and the page unlock.
Suggested and reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
pages in vm_pageout_scan(). The reactivation rate of cache pages created
by vm_pageout_scan() is extremely low; typically no more than 0.5% to
2.25% of the pages are ever reactivated. At the same time, caching pages
is more expensive than freeing them. For example, in a test with
PostgreSQL, this change reduced the amount of time spent in the inactive
queue scan by 1/6.
Differential Revision: https://reviews.freebsd.org/D2805
Reviewed by: kib
Sponsored by: EMC / Isilon Storage Division
in the requested array, then it is responsible for disposition of previous
page and is responsible for updating the entry in the requested array.
Now consumers of KPI do not need to re-lookup the pages after call to
vm_pager_get_pages().
Reviewed by: kib
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
Use the same scheme implemented to manage credentials.
Code needing to look at process's credentials (as opposed to thred's) is
provided with *_proc variants of relevant functions.
Places which possibly had to take the proc lock anyway still use the proc
pointer to access limits.
correctly handle deallocation requests of two or more gigabytes in size.
Eventually, this would lead to a panic elsewhere in the kernel, such as
"vm_radix_insert: key <vm_pindex_t> is already present".
Reported by: Ilias Marinos
MFC after: 1 week
logic is now placed in the mmap hook implementation rather than requiring
it to be placed in sys/vm/vm_mmap.c. This hook allows new file types to
support mmap() as well as potentially allowing mmap() for existing file
types that do not currently support any mapping.
The vm_mmap() function is now split up into two functions. A new
vm_mmap_object() function handles the "back half" of vm_mmap() and accepts
a referenced VM object to map rather than a (handle, handle_type) tuple.
vm_mmap() is now reduced to converting a (handle, handle_type) tuple to a
a VM object and then calling vm_mmap_object() to handle the actual mapping.
The vm_mmap() function remains for use by other parts of the kernel
(e.g. device drivers and exec) but now only supports mapping vnodes,
character devices, and anonymous memory.
The mmap() system call invokes vm_mmap_object() directly with a NULL object
for anonymous mappings. For mappings using a file descriptor, the
descriptors fo_mmap() hook is invoked instead. The fo_mmap() hook is
responsible for performing type-specific checks and adjustments to
arguments as well as possibly modifying mapping parameters such as flags
or the object offset. The fo_mmap() hook routines then call
vm_mmap_object() to handle the actual mapping.
The fo_mmap() hook is optional. If it is not set, then fo_mmap() will
fail with ENODEV. A fo_mmap() hook is implemented for regular files,
character devices, and shared memory objects (created via shm_open()).
While here, consistently use the VM_PROT_* constants for the vm_prot_t
type for the 'prot' variable passed to vm_mmap() and vm_mmap_object()
as well as the vm_mmap_vnode() and vm_mmap_cdev() helper routines.
Previously some places were using the mmap()-specific PROT_* constants
instead. While this happens to work because PROT_xx == VM_PROT_xx,
using VM_PROT_* is more correct.
Differential Revision: https://reviews.freebsd.org/D2658
Reviewed by: alc (glanced over), kib
MFC after: 1 month
Sponsored by: Chelsio
When providing memory map information to userland, populate the vnode pointer
for tmpfs files. Set the memory mapping to appear as a vnode type, to match
FreeBSD 9 behavior.
This fixes the use of tmpfs files with the dtrace pid provider,
procstat -v, procfs, linprocfs, pmc (pmcstat), and ptrace (PT_VM_ENTRY).
Submitted by: Eric Badger <eric@badgerio.us> (initial revision)
Obtained from: Dell Inc.
PR: 198431
MFC after: 2 weeks
Reviewed by: jhb
Approved by: kib (mentor)
examined via 'vmstat -o'. It can be used to determine which files are
using physical pages of memory and how much each is using.
Differential Revision: https://reviews.freebsd.org/D2277
Reviewed by: alc, kib
MFC after: 2 weeks
Sponsored by: Norse Corp, Inc. (forward porting to HEAD/10)
years for head. However, it is continuously misused as the mpsafe argument
for callout_init(9). Deprecate the flag and clean up callout_init() calls
to make them more consistent.
Differential Revision: https://reviews.freebsd.org/D2613
Reviewed by: jhb
MFC after: 2 weeks
r283162.
Fix a cosmetic issue with vm_page_alloc() calling vm_page_free_toq()
with the page not completely satisfying vm_page_free() assertions.
The page is not owned by the object, since insertion failed. But
besides m->object reset to NULL, we should also set VPO_UNMANAGED flag
for consistency.
Reported by: pho
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
fragmented conditions currently just wakes up the pagedaemon. The
kmem arena is significantly smaller then the total available physical
memory, which means that there are loads where kmem arena space could
be exhausted, while there is a lot of pages available still. The
woken up pagedaemon sees vm_pages_needed != 0, verifies the condition
vm_paging_needed() which is false, clears the pass and returns back to
sleep, not calling neither uma_reclaim() nor lowmem handler.
To handle low kmem arena conditions, create additional pagedaemon
thread which calls uma_reclaim() directly. The thread sleeps on the
dedicated channel and kmem_reclaim() wakes the thread in addition to
the pagedaemon.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
This is ok since objects come from a NOFREE zone and allows objects to
be locked while traversing the object list without triggering a LOR.
Ensure that objects on the list are marked DEAD while free or stillborn,
and that they have a refcount of zero. This required updating most of
the pagers to explicitly mark an object as dead when deallocating it.
(Only the vnode pager did this previously.)
Differential Revision: https://reviews.freebsd.org/D2423
Reviewed by: alc, kib (earlier version)
MFC after: 2 weeks
Sponsored by: Norse Corp, Inc.
a basic ACPI SLIT table parser.
For now this just exports the map via sysctl; it'll eventually be useful
to userland when there's more useful NUMA support in -HEAD.
* Add an optional mem_locality map;
* add a mapping function taking from/to domain and returning the
relative cost, or -1 if it's not available;
* Add a very basic SLIT parser to x86 ACPI.
Differential Revision: https://reviews.freebsd.org/D2460
Reviewed by: rpaulo, stas, jhb
Sponsored by: Norse Corp, Inc (hardware, coding); Dell (hardware)
should be done not with the number of pages in the first block, but with the
overall number of pages. While here, add KASSERT that makes sure that BMAP
doesn't return completely irrelevant blocks.
Reviewed by: kib
Tested by: pho
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
in the main swapper work cycle, do it in the sysctl handler. This removes
extra mutex acquisition from the main cycle and makes the sysctl knob return
error on an invalid value, instead of accepting and fixing it.
Reviewed by: kib
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
remains. Xen is planning to phase out support for PV upstream since it
is harder to maintain and has more overhead. Modern x86 CPUs include
virtualization extensions that support HVM guests instead of PV guests.
In addition, the PV code was i386 only and not as well maintained recently
as the HVM code.
- Remove the i386-only NATIVE option that was used to disable certain
components for PV kernels. These components are now standard as they
are on amd64.
- Remove !XENHVM bits from PV drivers.
- Remove various shims required for XEN (e.g. PT_UPDATES_FLUSH, LOAD_CR3,
etc.)
- Remove duplicate copy of <xen/features.h>.
- Remove unused, i386-only xenstored.h.
Differential Revision: https://reviews.freebsd.org/D2362
Reviewed by: royger
Tested by: royger (i386/amd64 HVM domU and amd64 PVH dom0)
Relnotes: yes
a text file with a list of physical memory addresses to exclude, and have it
loaded at boot time via the provided example in loader.conf. The tunable
'vm.blacklist' remains, but using an external file means that there's no
practical limit to the size of the list. This change also improves the
scanning algorithm for processing the list, scanning the list only once
instead of scanning it for every page in the system. Both the sysctl and
the file can be unsorted and contain duplicates so long as each entry is
numeric (decimal or hex) and is separated by a space, comma, or newline
character. The sysctl 'vm.page_blacklist' is now provided to report what
memory locations were successfully excluded.
Reviewed by: imp, emax
Obtained from: Netflix, Inc.
MFC after: 3 days
The point of this is to be able to add RACCT (with RACCT_DISABLED)
to GENERIC, to avoid having to rebuild the kernel to use rctl(8).
Differential Revision: https://reviews.freebsd.org/D2369
Reviewed by: kib@
MFC after: 1 month
Relnotes: yes
Sponsored by: The FreeBSD Foundation
users, myself included. The original code is likely papering over a
larger bug that needs to be explored, but for now get things back to
a working state.
Obtained from: Netflix, Inc.
MFC after: immediately
pwrite(2) syscalls are wrapped to provide compatibility with pre-7.x
kernels which required padding before the off_t parameter. The
fcntl(2) contains compatibility code to handle kernels before the
struct flock was changed during the 8.x CURRENT development. The
shims were reasonable to allow easier revert to the older kernel at
that time.
Now, two or three major releases later, shims do not serve any
purpose. Such old kernels cannot handle current libc, so revert the
compatibility code.
Make padded syscalls support conditional under the COMPAT6 config
option. For COMPAT32, the syscalls were under COMPAT6 already.
Remove WITHOUT_SYSCALL_COMPAT build option, which only purpose was to
(partially) disable the removed shims.
Reviewed by: jhb, imp (previous versions)
Discussed with: peter
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
function that does the locking and validation associated with cleaning
a page. This moves 150 lines of code into its own function.
- Rename vm_pageout_clean() to vm_pageout_cluster() to define what it
really does; clustering nearby pages for pageout optimization.
Reviewd by: alc, kib, kmacy
Tested by: pho (earlier version)
Sponsored by: EMC / Isilon
that performs the equivalent of an automatic madvise(..., MADV_DONTNEED).
The current heuristic, even with the improvements that I made a few years
ago, is a good example of making the wrong trade-off, or optimizing for
the infrequent case. The infrequent case being reading a single file that
is much larger than memory using mmap(2). And, in this case, the page
daemon isn't the bottleneck; it's the I/O.
In all other cases, the current heuristic has too many false positives,
i.e., it caches too many pages that are later reused. To give one
example, thousands of pages are cached by the current heuristic during a
buildworld and all of them are reactivated before the buildworld
completes. In particular, clang reads source files using mmap(2) and
there are some relatively large source files in our source tree, e.g.,
sqlite, that are read multiple times. With the new heuristic, I see fewer
false positives and they have a much lower cost.
I actually tried something like this more than two years ago and it
didn't perform as well as the cache behind heuristic. However, that was
before the changes to the page daemon in late summer of 2013 and the
existence of pmap_advise(). In particular, with the page daemon doing
its work more frequently and in smaller batches, it now completes its
work while the application accessing the file is blocked on I/O.
Whereas previously, the page daemon appeared to hog the CPU for so long
that it caused "hiccups" in the application's execution.
Finally, I'll add that the elimination of cache pages is a prerequisite
for NUMA support.
Reviewed by: jeff, kib
Sponsored by: EMC / Isilon Storage Division
A couple of internal functions used by malloc(9) and uma truncated
a size_t down to an int. This could cause any number of issues
(e.g. indefinite sleeps, memory corruption) if any kernel
subsystem tried to allocate 2GB or more through malloc. zfs would
attempt such an allocation when run on a system with 2TB or more
of RAM.
Note to self: When this is MFCed, sparc64 needs the same fix.
Differential revision: https://reviews.freebsd.org/D2106
Reviewed by: kib
Reported by: Michael Fuckner <michael@fuckner.net>
Tested by: Michael Fuckner <michael@fuckner.net>
MFC after: 2 weeks
Swap device is still reported as enabled, and system still may crash later
if some swapped-out kernel pages were lost with the device, but at least
GEOM and CAM can now release the lost disk, allowing it to be reconnected.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
vm.boot_pages is marked as a CTLFLAG_RDTUN, but it's used by the VM
before the sysctl subsystem is initialsed. We manually fetch the
variable from the environment to work around this problem.
Tested by: Keith White kwhite at uottawa.ca
MFC after: 1 week
named objects to zero before the virtual address is selected. Previously,
the color setting was delayed until after the virtual address was
selected. In rtld, this delay effectively prevented the mapping of a
shared library's code section using superpages. Now, for example, we see
the first 1 MB of libc's code on armv6 mapped by a superpage after we've
gotten through the initial cold misses that bring the first 1 MB of code
into memory. (With the page clustering that we perform on read faults,
this happens quickly.)
Differential Revision: https://reviews.freebsd.org/D2013
Reviewed by: jhb, kib
Tested by: Svatopluk Kraus (armv6)
MFC after: 6 weeks
promoted" panics. The sequence of events that leads to a panic is rather
long and circuitous. First, suppose that process P has a promoted
superpage S within vm object O that it can write to. Then, suppose that P
forks, which leads to S being write protected. Now, before P's child
exits, suppose that P writes to another virtual page within O. Since the
pages within O are copy on write, a shadow object for O is created to
house the new physical copy of the faulted on virtual page. Then, before
P can fault on S, P's child exists. Now, when P faults on S, it will
follow the "optimized" path for copy-on-write faults in vm_fault(),
wherein the underlying physical page is moved from O to its shadow object
rather than allocating a new page and copying the new page's contents from
the old page. Moreover, suppose that every 4 KB physical page making up S
is moved to the shadow object in this way. However, the optimized path
does not move the underlying superpage reservation, which is the root
cause of the panics! Ultimately, P performs vm_object_collapse() on O's
shadow object, which destroys O and in doing so breaks any reservations
still belonging to O. This leaves the reservation underlying S in an
inconsistent state: It's simultaneously not in use and promoted. Breaking
a reservation does not demote it because I never intended for a promoted
reservation to be broken. It makes little sense. Finally, this
inconsistency leads to an assertion failure the next time that the
reservation is used.
The failing assertion does not (currently) exist in FreeBSD 10.x or
earlier. There, we will quietly break the promoted reservation. While
illogical and unintended, breaking the reservation is essentially
harmless.
PR: 198163
Reviewed by: kib
Tested by: pho
X-MFC after: r267213
Sponsored by: EMC / Isilon Storage Division
- Allow to call the function with vm object lock held.
- Allow to specify reqpage that doesn't match any page in the region,
meaning freeing all pages.
o Utilize the new function in couple more places in vnode pager.
Reviewed by: alc, kib
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
strings returned to userland include the nulterm byte.
Some uses of sbuf_new_for_sysctl() write binary data rather than strings;
clear the SBUF_INCLUDENUL flag after calling sbuf_new_for_sysctl() in
those cases. (Note that the sbuf code still automatically adds a nulterm
byte in sbuf_finish(), but since it's not included in the length it won't
get copied to userland along with the binary data.)
Remove explicit adding of a nulterm byte in a couple places now that it
gets done automatically by the sbuf drain code.
PR: 195668
synchronous and asynchronous requests. The latter can saturate the
I/O and we do not want them to affect regular paging.
- Allocate the pbuf at the very beginning of the function, so that
if we are low on certain kind of pbufs don't even proceed to BMAP,
but sleep.
Reviewed by: kib
Sponsored by: Nginx, Inc.
Sponsored by: Netflix
to UFS, perform updates during syncer scans, which in particular means
that tmpfs now performs scan on sync. Also, this means that a mtime
update may be delayed up to 30 seconds after the write.
The vm_object' OBJ_TMPFS_DIRTY flag for tmpfs swap object is similar
to the OBJ_MIGHTBEDIRTY flag for the vnode object, it indicates that
object could have been dirtied. Adapt fast page fault handler and
vm_object_set_writeable_dirty() to handle OBJ_TMPFS_NODE same as
OBJT_VNODE.
Reported by: Ronald Klop <ronald-lists@klop.ws>
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
kill a process, when the system runs out of memory. Defaults to off.
Usually, this is most useful when the OOM condition is due to mismanagement
of memory, on a system where the applications in question don't respond well
to being killed.
In theory, if the system is properly managed, it shouldn't be possible to
hit this condition. If it does, the panic can be more desirable for some
users (since it can be a good means of finding the root cause) rather than
killing the largest process and continuing on its merry way.
As kib@ mentions in the differential, there is also protect(1), which uses
procctl(PROC_SPROTECT) to ensure that some processes are immune. However,
a panic approach is still useful in some environments. This is primarily
intended as a development/debugging tool.
Differential Revision: D1627
Reviewed by: kib
MFC after: 1 week
of an vm space may require obtaining sleepable locks. Hold the
process to keep the pointer valid, and change trylock to lock, since
there is no longer two process locks owned simultaneously in
vm_pageout_oom().
Note that after the process lock is dropped, process might exec, and
no longer qualify as the owner of biggest vm space.
In collaboration with: rstone
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
handler. For roughly twenty years, the page fault handler has used the
same basic strategy: Fetch a fixed number of non-resident pages both ahead
and behind the virtual page that was faulted on. Over the years,
alternative strategies have been implemented for optimizing the handling
of random and sequential access patterns, but the only change to the
default strategy has been to increase the number of pages read ahead to 7
and behind to 8.
The problem with the default page clustering strategy becomes apparent
when you look at how it behaves on the code section of an executable or
shared library. (To simplify the following explanation, I'm going to
ignore the read that is performed to obtain the header and assume that no
pages are resident at the start of execution.) Suppose that we have a
code section consisting of 32 pages. Further, suppose that we access
pages 4, 28, and 16 in that order. Under the default page clustering
strategy, we page fault three times and perform three I/O operations,
because the first and second page faults only read a truncated cluster of
12 pages. In contrast, if we access pages 8, 24, and 16 in that order, we
only fault twice and perform two I/O operations, because the first and
second page faults read a full cluster of 16 pages. In general, truncated
clusters are more common than full clusters.
To address this problem, this revision changes the default page clustering
strategy to align the start of the cluster to a page offset within the vm
object that is a multiple of the cluster size. This results in many fewer
truncated clusters. Returning to our example, if we now access pages 4,
28, and 16 in that order, the cluster that is read to satisfy the page
fault on page 28 will now include page 16. So, the access to page 16 will
no longer page fault and perform an I/O operation.
Since the revised default page clustering strategy is typically reading
more pages at a time, we are likely to read a few more pages that are
never accessed. However, for the various programs that we looked at,
including clang, emacs, firefox, and openjdk, the reduction in the number
of page faults and I/O operations far outweighed the increase in the
number of pages that are never accessed. Moreover, the extra resident
pages allowed for many more superpage mappings. For example, if we look
at the execution of clang during a buildworld, the number of (hard) page
faults on the code section drops by 26%, the number of superpage mappings
increases by about 29,000, but the number of never accessed pages only
increases from 30.38% to 33.66%. Finally, this leads to a small but
measureable reduction in execution time.
In collaboration with: Emily Pettigrew <ejp1@rice.edu>
Differential Revision: https://reviews.freebsd.org/D1500
Reviewed by: jhb, kib
MFC after: 6 weeks
managing pages from different address ranges. Generally speaking, this
feature is used to increase the likelihood that physical pages are
available that can meet special DMA requirements or can be accessed through
a limited-coverage direct mapping (e.g., MIPS). However, prior to this
change, the configuration of the free lists was static, i.e., it was
determined at compile time. Consequentally, free lists could be created
for address ranges that held no actual pages, for example, on 32-bit MIPS-
based systems with 512 MB or less of physical memory. This change makes
the creation of the free lists dynamic, i.e., it is based on the available
physical memory at boot time.
On 64-bit x86-based systems with 64 GB or more of physical memory, create
free lists for managing pages with physical addresses below 4 GB. This
change is to address reported problems with initializing devices that
require the allocation of physical pages below 4 GB on some systems with
128 GB or more of physical memory.
PR: 185727
Differential Revision: https://reviews.freebsd.org/D1274
Reviewed by: jhb, kib
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division
Some old libraries may be used even with newer binaries (specifically the
Nvidia driver libraries).
Differential Revision: https://reviews.freebsd.org/D1262
Reviewed by: kib
vp->v_vflag without taking vnode lock and without bypass. We do know
that vp is the lowest level in the stack, since the pointer is
obtained from the object' handle. Stale VV_TEXT flag read can only
happen if parallel execve() is performed and not yet activated the
image, since process takes reference for text mapping. In this case,
the execve() code manages the VV_TEXT flag on its own already.
It was observed that otherwise read-only sendfile(2) requires
exclusive vnode lock and contending on it on some loads for VV_TEXT
handling.
Reported by: glebius, scottl
Tested by: glebius, pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
uma_reclaim(). Reclamation code must not see half-constructed or
destructed zones. Do this by bracing uma_zcreate() and uma_zdestroy()
into a shared-locked sx, and take the sx exclusively in uma_reclaim().
Usually zones are not created/destroyed during the system operation,
but tmpfs mounts do cause zone operations and exposed the bug.
Another solution could be to only expose a new keg on uma_kegs list
after the corresponding zone is fully constructed, and similar
treatment for the destruction. But it probably requires more risky
code rearrangement as well.
Reported and tested by: pho
Discussed with: avg
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
o Provide a new VOP_GETPAGES_ASYNC(), which works like VOP_GETPAGES(), but
doesn't sleep. It returns immediately, and will execute the I/O done handler
function that must be supplied as argument.
o Provide VOP_GETPAGES_ASYNC() for the FFS, which uses vnode_pager.
o Extend pagertab to support pgo_getpages_async method, and implement this
method for vnode_pager.
Reviewed by: kib
Tested by: pho
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
on i386 PAE. Previously, VM_PHYSSEG_SPARSE could not be used on amd64 and
i386 because vm_page_startup() would not create vm_page structures for the
kernel page table pages allocated during pmap_bootstrap() but those vm_page
structures are needed when the kernel attempts to promote the corresponding
kernel virtual addresses to superpage mappings. To address this problem, a
new public function, vm_phys_add_seg(), is introduced and vm_phys_init() is
updated to reflect the creation of vm_phys_seg structures by calls to
vm_phys_add_seg().
Discussed with: Svatopluk Kraus
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division
default_pager_putpages() and swap_pager_putpages().
It is the same fix as was done for vnode_pager_putpages()
in r271586.
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
This code has had an extensive rewrite and a good series of reviews, both by the author and other parties. This means a lot of code has been simplified. Pluggable structures for high-rate entropy generators are available, and it is most definitely not the case that /dev/random can be driven by only a hardware souce any more. This has been designed out of the device. Hardware sources are stirred into the CSPRNG (Yarrow, Fortuna) like any other entropy source. Pluggable modules may be written by third parties for additional sources.
The harvesting structures and consequently the locking have been simplified. Entropy harvesting is done in a more general way (the documentation for this will follow). There is some GREAT entropy to be had in the UMA allocator, but it is disabled for now as messing with that is likely to annoy many people.
The venerable (but effective) Yarrow algorithm, which is no longer supported by its authors now has an alternative, Fortuna. For now, Yarrow is retained as the default algorithm, but this may be changed using a kernel option. It is intended to make Fortuna the default algorithm for 11.0. Interested parties are encouraged to read ISBN 978-0-470-47424-2 "Cryptography Engineering" By Ferguson, Schneier and Kohno for Fortuna's gory details. Heck, read it anyway.
Many thanks to Arthur Mesh who did early grunt work, and who got caught in the crossfire rather more than he deserved to.
My thanks also to folks who helped me thresh this out on whiteboards and in the odd "Hallway track", or otherwise.
My Nomex pants are on. Let the feedback commence!
Reviewed by: trasz,des(partial),imp(partial?),rwatson(partial?)
Approved by: so(des)
- Wrong integer type was specified.
- Wrong or missing "access" specifier. The "access" specifier
sometimes included the SYSCTL type, which it should not, except for
procedural SYSCTL nodes.
- Logical OR where binary OR was expected.
- Properly assert the "access" argument passed to all SYSCTL macros,
using the CTASSERT macro. This applies to both static- and dynamically
created SYSCTLs.
- Properly assert the the data type for both static and dynamic
SYSCTLs. In the case of static SYSCTLs we only assert that the data
pointed to by the SYSCTL data pointer has the correct size, hence
there is no easy way to assert types in the C language outside a
C-function.
- Rewrote some code which doesn't pass a constant "access" specifier
when creating dynamic SYSCTL nodes, which is now a requirement.
- Updated "EXAMPLES" section in SYSCTL manual page.
MFC after: 3 days
Sponsored by: Mellanox Technologies
Older binaries are still permitted to use these flags.
PR: 193961 (exp-run in ports)
Differential Revision: https://reviews.freebsd.org/D848
Reviewed by: kib
in userland rename in-kernel getenv()/setenv() to kern_setenv()/kern_getenv().
This fixes a namespace collision with libc symbols.
Submitted by: kmacy
Tested by: make universe
compatible with write-locked path. Test for MAP_ENTRY_NOSYNC and set
VPO_NOSYNC for pages with dirty mask zero (this does not exclude a
possibility that the page is dirty, e.g. due to read fault on
writeable mapping and consequent write; the same issue exists in the
slow path).
Use helper vm_fault_dirty() to unify fast and slow path handling of
VPO_NOSYNC and setting the dirty mask.
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
Acquire the lock in read mode when just needed to ensure the stability
of the keg list. The UMA lock may be held for a long time (relatively
speaking) in uma_reclaim() on machines with lots of zones/kegs. If the
uma_timeout() would fire during that period, subsequent callouts on that
CPU may be significantly delayed.
Reviewed by: jhb
Callers of zone_drain_wait(M_WAITOK) do not need to hold (and were not)
the uma_mtx, but we would attempt to unlock and relock the mutex if we
had to sleep because the zone was already draining. The M_NOWAIT callers
may hold the uma_mtx, but we do not sleep in that case.
Reviewed by: jhb
MFC after: 3 days
interrupts and report the largest value seen as sysctl
debug.max_kstack_used. Useful to estimate how close the kernel stack
size is to overflow.
In collaboration with: Larry Baird <lab@gta.com>
Sponsored by: The FreeBSD Foundation (kib)
MFC after: 1 week
Remove previously added kmem methods in favour of defines which
allow diff minimisation between upstream code base.
Rebalance ARC free target to be vm_pageout_wakeup_thresh by default
which eliminates issue where ARC gets minimised instead of balancing
with VM pageout. The restores the target point prior to r270759.
Bring in missing upstream only changes which move unused code to
further eliminate code differences.
Add additional DTRACE probe to aid monitoring of ARC behaviour.
Enable upstream i386 code paths on platforms which don't define
UMA_MD_SMALL_ALLOC.
Fix mixture of byte an page values in arc_memory_throttle i386 code
path value assignment of available_memory.
PR: 187594
Review: D702
Reviewed by: avg
MFC after: 1 week
X-MFC-With: r270759 & r270861
Sponsored by: Multiplay
the wired attribute of the mapping. As result, some pmap
implementations clear the wired state of the page table entries, which
breaks invariants and allows the entries to be lost. Avoid calling
vm_map_pmap_enter() for the MADV_WILLNEED on the wired entry, the
pages must be already mapped.
Noted and reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
MAP_PRIVATE flags to MAP_SHARED. Apparently, some code in tree, in
particular, libgeom, relied on this behaviour, see r271721. For
regular file types, the absence of the flags is interpreted as
MAP_PRIVATE, and libc nlist used this (fixed in r271723).
Allow the implicit flags for legacy binaries. Bump __FreeBSD_version
to get the ABI note on new binaries to check for in mmap code.
Remove the test for presence of one of the MAP_ANON, MAP_SHARED or
MAP_PRIVATE flags before fget_mmap(). For MAP_ANON, we already verify
that passed fd == -1. For fd != -1, test after fget_mmap() (for newer
binaries) covers the case.
Reported by: bdrewery, pho
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
- Fail with EINVAL if an invalid protection mask is passed to mmap().
- Fail with EINVAL if an unknown flag is passed to mmap().
- Fail with EINVAL if both MAP_PRIVATE and MAP_SHARED are passed to mmap().
- Require one of either MAP_PRIVATE or MAP_SHARED for non-anonymous
mappings.
Reviewed by: alc, kib
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D698
Eliminate an exclusive object lock acquisition and release on the expected
execution path.
Do page zeroing before the object lock is acquired rather than during the
time that the object lock is held.
Use vm_pager_free_nonreq() to eliminate duplicated code.
Reviewed by: kib
MFC after: 6 weeks
Sponsored by: EMC / Isilon Storage Division
by ffs and ext2fs. Remove duplicated call to vm_page_zero_invalid(),
done by VOP and by vm_pager_getpages(). Use vm_pager_free_nonreq().
Reviewed by: alc (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 6 weeks (after r271596)
path through the NFS clients' getpages functions.
Introduce vm_pager_free_nonreq(). This function can be used to eliminate
code that is duplicated in many getpages functions. Also, in contrast to
the code that currently appears in those getpages functions,
vm_pager_free_nonreq() avoids acquiring an exclusive object lock in one
case.
Reviewed by: kib
MFC after: 6 weeks
Sponsored by: EMC / Isilon Storage Division
The changes should not modify the generated code.
The pager->pgo_putpages() method takes int flags as its fourth
argument, while vnode_pager_putpages() used boolean_t (which is
typedef'ed to int). The flags are from VM_PAGER_* namespace, while
vnode_pager_putpages() passed TRUE and OBJPC_SYNC to VOP_PUTPAGES(),
which both are numerically equal to VM_PAGER_PUT_SYNC.
Noted and reviewed by: alc (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
isn't being allocated for the last of the requested pages, because a
reservation won't fit in the gap between allocated pages, then the
reservation structure shouldn't be initialized.
While I'm here, improve the nearby comments.
Reported by: jeff, pho
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
Prior to this change we triggered ARC reclaim when kmem usage passed 3/4
of the total available, as indicated by vmem_size(kmem_arena, VMEM_ALLOC).
This could lead large amounts of unused RAM e.g. on a 192GB machine with
ARC the only major RAM consumer, 40GB of RAM would remain unused.
The old method has also been seen to result in extreme RAM usage under
certain loads, causing poor performance and stalls.
We now trigger ARC reclaim when the number of free pages drops below the
value defined by the new sysctl vfs.zfs.arc_free_target, which defaults
to the value of vm.v_free_target.
Credit to Karl Denninger for the original patch on which this update was
based.
PR: 191510 and 187594
Tested by: dteske
MFC after: 1 week
Relnotes: yes
Sponsored by: Multiplay
"vm_paging_target() > 0" was a reasonable way of determining if the
inactive queue scan met its target. However, now that other threads
can be allocating pages while the inactive queue scan is running, it's
an unreliable method. The effect of it being unreliable is that we
can start swapping out processes when we didn't intend to.
This issue has existed since the kernel was multithreaded, but the
changes to the inactive queue target in 10.0-RELEASE have made its
effects visible.
This change introduces a more direct method for determining if the
inactive queue scan met its target that is not affected by the actions
of other threads.
Reported by: Steve Polyack
Tested by: pho, Steve Polyack (an earlier version)
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
called a scalable path. When several preconditions hold, the vm
object lock for the object containing the faulted page is taken in
read mode, instead of write, which allows parallel faults processing
in the region.
Namely, the fast path is taken when the faulted page already exists
and does not need copy on write, is already fully valid, and not busy.
For technical reasons, fast path is avoided when the fault is the
first write on the vnode object, or when the fault is for wiring or
debugger read or write.
On the fast path, pmap_enter(9) is passed the PMAP_ENTER_NOSLEEP flag,
since object lock is kept. Pmap might fail to create the entry, in
which case the fallback to slow path is performed.
Reviewed by: alc
Tested by: pho (previous version)
Hardware provided and hosted by: The FreeBSD Foundation and
Sentex Data Communications
Sponsored by: The FreeBSD Foundation
MFC after: 2 week
page queue even when the allocation is not wired. It is
responsibility of the vm_page_grab() caller to ensure that the page
does not end on the vm_object queue but not on the pagedaemon queue,
which would effectively create unpageable unwired page.
In exec_map_first_page() and vm_imgact_hold_page(), activate the page
immediately after unbusying it, to avoid leak.
In the uiomove_object_page(), deactivate page before the object is
unlocked. There is no leak, since the page is deactivated after
uiomove_fromphys() finished. But allowing non-queued non-wired page
in the unlocked object queue makes it impossible to assert that leak
does not happen in other places.
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
pmap_enter(PMAP_ENTER_NOSLEEP). The PGA_WRITEABLE flag can be set
when either the page is busied, or the owner object is locked.
Update comments, move all assertions about page state when
PGA_WRITEABLE flag is set, into new helper
vm_page_assert_pga_writeable().
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
mapping size (currently unused). The flags includes the fault access
bits, wired flag as PMAP_ENTER_WIRED, and a new flag
PMAP_ENTER_NOSLEEP to indicate that pmap should not sleep.
For powerpc aim both 32 and 64 bit, fix implementation to ensure that
the requested mapping is created when PMAP_ENTER_NOSLEEP is not
specified, in particular, wait for the available memory required to
proceed.
In collaboration with: alc
Tested by: nwhitehorn (ppc aim32 and booke)
Sponsored by: The FreeBSD Foundation and EMC / Isilon Storage Division
MFC after: 2 weeks
swap pager. Swap pager uses a private mutex to protect swap metadata,
and does not rely on the vm object lock to ensure integrity of it.
Weaken the requirement for the vm object lock by only asserting locked
object in vm_pager_page_unswapped(), instead of locked exclusively.
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
With the current implementation of managed fictitious ranges when
also using VM_PHYSSEG_DENSE, a user could try to register a
fictitious range that starts inside of vm_page_array, but then
overrruns it (because the end of the fictitious range is greater than
vm_page_array_size + first_page). This would result in PHYS_TO_VM_PAGE
returning unallocated pages from past the end of vm_page_array. The
same could happen if a user tried to register a segment that starts
outside of vm_page_array but ends inside of it.
In order to fix this, allow vm_phys_fictitious_{reg/unreg}_range to
use a set of pages from vm_page_array, and allocate the rest.
Sponsored by: Citrix Systems R&D
Reviewed by: kib, alc
vm/vm_phys.c:
- Allow registering/unregistering fictitious ranges that overrun
vm_page_array.
We continue to use pmap_enter() for that. For unwiring virtual pages, we
now use pmap_unwire(), which unwires a range of virtual addresses instead
of a single virtual page.
Sponsored by: EMC / Isilon Storage Division
pmap_unwire() and vm_object_unwire().
Retire vm_fault_{un,}wire(), since they are no longer used.
(See r268327 and r269134 for the motivation behind this change.)
Reviewed by: kib
Sponsored by: EMC / Isilon Storage Division
underlying physical pages are mapped by the pmap. If, for example, the
application has performed an mprotect(..., PROT_NONE) on any part of the
wired region, then those pages will no longer be mapped by the pmap.
So, using the pmap to lookup the wired pages in order to unwire them
doesn't always work, and when it doesn't work wired pages are leaked.
To avoid the leak, introduce and use a new function vm_object_unwire()
that locates the wired pages by traversing the object and its backing
objects.
At the same time, switch from using pmap_change_wiring() to the recently
introduced function pmap_unwire() for unwiring the region's mappings.
pmap_unwire() is faster, because it operates a range of virtual addresses
rather than a single virtual page at a time. Moreover, by operating on
a range, it is superpage friendly. It doesn't waste time performing
unnecessary demotions.
Reported by: markj
Reviewed by: kib
Tested by: pho, jmg (arm)
Sponsored by: EMC / Isilon Storage Division
and tmpfs object cannot shadow. In other words, tmpfs vm object is
always at the bottom of the shadow chain.
Reported and tested by: bdrewery
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
vnode for the tmpfs node owning this object. The flag is currently
used for two purposes. First, it allows to correctly handle VV_TEXT
for tmpfs vnode when the ref count on the object is decremented to 1,
similar to vnode_pager_dealloc() for regular filesystems. Second, it
prevents some operations, which are done on OBJT_SWAP vm objects
backing user anonymous memory, but are incorrect for the object owned
by tmpfs node.
The second kind of use of the OBJ_TMPFS flag is incorrect, since the
vnode might be reclaimed, which clears the flag, but vm object
operations must still be disallowed.
Introduce one more flag, OBJ_TMPFS_NODE, which is permanently set on
the object for VREG tmpfs node, and used instead of OBJ_TMPFS to test
whether vm object collapse and similar actions should be disabled.
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
The number of vm fictitious regions was limited to 8 by default, but
Xen will make heavy usage of those kind of regions in order to map
memory from foreign domains, so instead of increasing the default
number, change the implementation to use a red-black tree to track vm
fictitious ranges.
The public interface remains the same.
Sponsored by: Citrix Systems R&D
Reviewed by: kib, alc
Approved by: gibbs
vm/vm_phys.c:
- Replace the vm fictitious static array with a red-black tree.
- Use a rwlock instead of a mutex, since now we also need to take the
lock in vm_phys_fictitious_to_vm_page, and it can be shared.
This includes:
o All directories named *ia64*
o All files named *ia64*
o All ia64-specific code guarded by __ia64__
o All ia64-specific makefile logic
o Mention of ia64 in comments and documentation
This excludes:
o Everything under contrib/
o Everything under crypto/
o sys/xen/interface
o sys/sys/elf_common.h
Discussed at: BSDcan
several reasons for this change:
pmap_change_wiring() has never (in my memory) been used to set the wired
attribute on a virtual page. We have always used pmap_enter() to do that.
Moreover, it is not really safe to use pmap_change_wiring() to set the wired
attribute on a virtual page. The description of pmap_change_wiring() says
that it assumes the existence of a mapping in the pmap. However, non-wired
mappings may be reclaimed by the pmap at any time. (See pmap_collect().)
Many implementations of pmap_change_wiring() will crash if the mapping does
not exist.
pmap_unwire() accepts a range of virtual addresses, whereas
pmap_change_wiring() acts upon a single virtual page. Since we are
typically unwiring a range of virtual addresses, pmap_unwire() will be more
efficient. Moreover, pmap_unwire() allows us to unwire superpage mappings.
Previously, we were forced to demote the superpage mapping, because
pmap_change_wiring() only allowed us to express the unwiring of a single
base page mapping at a time. This added to the overhead of unwiring for
large ranges of addresses, including the implicit unwiring that occurs at
process termination.
Implementations for arm and powerpc will follow.
Discussed with: jeff, marcel
Reviewed by: kib
Sponsored by: EMC / Isilon Storage Division
These changes prevent sysctl(8) from returning proper output,
such as:
1) no output from sysctl(8)
2) erroneously returning ENOMEM with tools like truss(1)
or uname(1)
truss: can not get etype: Cannot allocate memory
there is an environment variable which shall initialize the SYSCTL
during early boot. This works for all SYSCTL types both statically and
dynamically created ones, except for the SYSCTL NODE type and SYSCTLs
which belong to VNETs. A new flag, CTLFLAG_NOFETCH, has been added to
be used in the case a tunable sysctl has a custom initialisation
function allowing the sysctl to still be marked as a tunable. The
kernel SYSCTL API is mostly the same, with a few exceptions for some
special operations like iterating childrens of a static/extern SYSCTL
node. This operation should probably be made into a factored out
common macro, hence some device drivers use this. The reason for
changing the SYSCTL API was the need for a SYSCTL parent OID pointer
and not only the SYSCTL parent OID list pointer in order to quickly
generate the sysctl path. The motivation behind this patch is to avoid
parameter loading cludges inside the OFED driver subsystem. Instead of
adding special code to the OFED driver subsystem to post-load tunables
into dynamically created sysctls, we generalize this in the kernel.
Other changes:
- Corrected a possibly incorrect sysctl name from "hw.cbb.intr_mask"
to "hw.pcic.intr_mask".
- Removed redundant TUNABLE statements throughout the kernel.
- Some minor code rewrites in connection to removing not needed
TUNABLE statements.
- Added a missing SYSCTL_DECL().
- Wrapped two very long lines.
- Avoid malloc()/free() inside sysctl string handling, in case it is
called to initialize a sysctl from a tunable, hence malloc()/free() is
not ready when sysctls from the sysctl dataset are registered.
- Bumped FreeBSD version to indicate SYSCTL API change.
MFC after: 2 weeks
Sponsored by: Mellanox Technologies
have to undo it by calling crfree(). This reduces the total number of calls
by vm_map_insert() to crhold() and crfree() by 45% in my tests.
Eliminate an unnecessary variable from vm_map_insert().
Reviewed by: kib
Tested by: pho
that it creates (r267645), we can place the check that blocks map entry
coalescing on stack entries in vm_map_simplify_entry() where it properly
belongs.
Reviewed by: kib
numerical values as MAP_STACK_GROWS_*, but the former is for entries'
eflags, while the later for the cow argument of vm_map_insert().
Submitted by: alc
map entries list, and that it does not overlap with the previous and
next entries.
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
