Some DSDT entries have multiple interrupts for one device.
Add support for it.
This fixes ahci on NXP LS2160 and genet on RPi4
Submitted by: Greg V <greg@unrelenting.technology>
Reviewed by: jhb
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D25145
While it is true that the ACPI spec says that the flag is only valid
on Extended Address Space Descriptors, examples of other descriptors
in the spec use the ProducerConsumer flag explicitly, and real
hardware uses it as well. In fact, even in the ASL of the Thunder X2
for which r330113 was a workaround, some devices use this flag on
non-Extended Address Space Descriptors correctly. Instead, only
ignore the flag for resources associated with the UART devices on the
Thunder X2 using the "ARMH0011" HID to identify these devices.
This should fix regressions from ignoring this flag in other contexts
such as Hyper-V.
PR: 235876
Reported by: Wei Hu <weh@microsoft.com>
Tested by: emaste (Thunder X2)
MFC after: 2 weeks
Now that we are handling PCI resources in pci_host_generic_acpi.c, we
don't need these change (made by r336129)
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D17792
On arm64 (where INTRNG is enabled), the interrupts have to be mapped
with ACPI_BUS_MAP_INTR() before adding them as resources to devices.
The earlier code did the mapping before calling acpi_set_resource(),
which bypassed code that checked for PCI link interrupts.
To fix this, move the call to map interrupts into acpi_set_resource()
and that requires additional work to lookup interrupt properties.
The changes here are to:
* extend acpi_lookup_irq_handler() to lookup an irq in the ACPI
resources
* create a helper function acpi_map_intr() which uses the updated
acpi_lookup_irq_handler() to look up an irq, and then map it
with ACPI_BUS_MAP_INTR()
* use acpi_map_intr() in acpi_pcib_route_interrupt() to map
pci link interrupts.
With these changes, we can drop the ifdefs in acpi_resource.c, and
we can also drop the call for mapping interrupts in generic_timer.c
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D17790
ACPI I/O port descriptors use _MIN and _MAX fields to specify the set
of allowable base (start) addresses for an I/O port resource along with
a _LEN field specifying the length. A fixed resource is supposed to be
encoded with _MIN == _MAX, but some buggy firmwares instead set _MAX to
the end of the fixed range. Relocating I/O ranges only make sense in
_PRS (possible resource settings), not in _CRS (current resource settings),
so if an I/O port range with _MAX set set to the end of the range is
present in _CRS, treat it as a fixed I/O port resource starting at
_MIN.
PR: 224096
Submitted by: Harald Böhm <harald@boehm.codes>
Pointy hat to: jhb (taking so long to actually commit this)
MFC after: 1 week
6.0 spec 6.4.3.5 bit 0 is ignored on QWord, DWord, and Word Address Space
Descriptors, but not Extended Address Space Descriptors.
Reviewed by: jhb
Sponsored by: DARPA, AFRL
Sponsored by: Cavium (Hardware)
Differential Revision: https://reviews.freebsd.org/D14516
This adds a new acpi_bus interface with a map_intr method. This is similar
to the Open Firmware map_intr method and allows us to create the needed
mapping from ACPI space to INTRNG space.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8617
Summary:
Migrate to using the semi-opaque type rman_res_t to specify rman resources. For
now, this is still compatible with u_long.
This is step one in migrating rman to use uintmax_t for resources instead of
u_long.
Going forward, this could feasibly be used to specify architecture-specific
definitions of resource ranges, rather than baking a specific integer type into
the API.
This change has been broken out to facilitate MFC'ing drivers back to 10 without
breaking ABI.
Reviewed By: jhb
Sponsored by: Alex Perez/Inertial Computing
Differential Revision: https://reviews.freebsd.org/D5075
settings for ACPI-enumerated serial ports by forcing any IRQs that use
an ISA IRQ value with these settings to active-high instead of active-low.
This is known to occur with the BIOS on an Intel D2500CCE motherboard.
Tested by: Robert Ames <robertames@hotmail.com>, lev
Submitted by: Juergen Weiss weiss at uni-mainz.de (original patch)
If the embedded controller exists before the sysresource devices, for
example, it will be attached first. Instead, let the normal device
order function work as we first desired. [1]
There still remained a problem where we couldn't allocate resources in
acpi0 that were passed up by the sysresource pseudo-devices. These
devices had to probe/attach first to give their resources to acpi, then
acpi would allocate them before probing/attaching other devices. To
work around this, we attach them from acpi_sysres_alloc(). A better
approach would be to implement multi-pass probe/attach in newbus but
that's a much bigger task.
Suggested by: jhb [1]
Hardware from: Centaur Technologies
MFC after: 1 week
acpi_resource change was a minor nit offered as an early candidate for
the recent ACPICA import problem and the acpi.c change is one I need to
test still that makes the ordered probing of system devices actually work
as advertised (probe devices in order based on the type of device rather
than in the order we encounter them in the device tree).
entry that is not zero, assume that it is really a hard-wired IRQ (commonly
used for APIC routing) and not a source index. In practice, we've only
ever seen source indices of 0 for legitimate non-hard-wired _PRT entries.
Reviewed by: njl
Tested by: Alex Lyashkov shadow at psoft dot net
MFC after: 2 weeks
producers rather than consumers as new-bus resources only handle consumed
resources. We already do this for the other ACPI resource types that
support the producer/consumer attribute.
hold its own values, pass them up to the parent (acpi0) and merge/uniq them
on the way. After the namespace evaluation, acpi will reserve these
resources and manage them via rman before bus_generic_probe() and
bus_generic_attach(). This is necessary because some systems specify
conflicting resources in separate sysresource objects. It's also cleaner
in that the interface between sysresource and acpi is now merely the parent's
resource list. This code handles the following cases:
1. Unique resource: add it to the parent via bus_set_resource().
2. New wholly contained in old: discard new.
3. New tail overlaps old head: grow old head downward.
AND/OR
4. New head overlaps old tail: grow old tail upward.
Tested by: Pawel Worach <sajd_at_telia.com>
Tested by: Radek Kozlowski <radek_at_raadradd.com>
MFC after: 5 days
systems that have overlapping regions specified in their sysresource
objects. This patch fixes ATA DMA and acpi_timer allocation for such
sysctems. It should eventually be moved to resource_list_add() if it is
a valid generalized approach. The minimal approach for 5.3 is:
"Loop through all current resources to see if the new one overlaps
any existing ones. If so, the old one always takes precedence and
the new one is adjusted (or rejected). We check for three cases:
1. Tail of new resource overlaps head of old resource: truncate the
new resource so it is contiguous with the start of the old.
2. New resource wholly contained within the old resource: error.
3. Head of new resource overlaps tail of old resource: truncate the
new resource so it is contiguous, following the old."
Tested by: Radek Kozlowski <radek_at_raadradd.com>
Discussed with: imp
MFC after: 4 days
actually used. For most ACPI devices this means deferring the call
until bus_alloc_resource().
- Add a function acpi_config_intr() to call BUS_CONFIG_INTR() for an
ACPI IRQ resource using the trigger mode and polarity information
stored in the ACPI resource object.
- Add a function acpi_lookup_irq_resource() to lookup the ACPI IRQ
resource that corresponds to a specified rid and new-bus resource.
- Have the ACPI PCI bridge driver call BUS_CONFIG_INTR() on interrupts
that it routes through link devices.
- Remove needactivate variable from acpi_alloc_resource() by changing the
function not modify the flags variable but just mask off RF_ACTIVE when
calling rman_reserve_resource().
Reviewed by: njl (1, an earlier version)
allocation was passed up to nexus. Now, we probe sysresource objects and
manage the resources they describe in a local rman pool. This helps
devices which attach/detach varying resources (like the _CST object) and
module loads/unloads. The allocation/release routines now check to see if
the resource is described in a child sysresource object and if so,
allocate from the local rman. Sysresource objects add their resources to
the pool and reserve them upon boot. This means sysresources need to be
probed before other ACPI devices.
Changes include:
* Add ordering to the child device probe. The current order is: system
resource objects, embedded controllers, then everything else.
* Make acpi_MatchHid take a handle instead of a device_t arg.
* Replace acpi_{get,set}_resource with the generic equivalents.
method. This is necessary on ia64 where it's known that serial interfaces
described in the ACPI namespace may not have the well-known IRQs assigned
to them. This confuses us in thinking they are PCI based interrupts and
wrongly program the APIC.
I/O port range, then we should ignore a resource if it's NOT
a memory range AND NOT an I/O port range.
The OR in the condition caused us to ignore perfectly valid
memory addresses.
While here, remove redundant parenthesis and reindent the
debug print to avoid long lines.
