Commit Graph

81 Commits

Author SHA1 Message Date
Matt Jacob
029f13c671 Fix bus dma segment count to be based off of MAXPHYS, not BUS_SPACE_MAXSIZE.
Grumble. I've seen better documented architectures out of Redmond.

Redo fabric evaluation to not use GET ALL NEXT (GA_NXT). Switches seem
to be trying to wriggle out of supporting this well. Instead, use
GID_FT to get a list of Port IDs and then use GPN_ID/GNN_ID to find the
port and node wwn. This should make working on fabrics a bit cleaner and
more stable.

This also caused some cleanup of SNS subcommand canonicalization so that
we can actually check for FS_ACC and FS_RJT, and if we get an FS_RJT,
print out the reason and explanation codes.

We'll keep the old GA_NXT method around if people want to uncomment a
controlling definition in ispvar.h.

This also had us clean up ISPASYNC_FABRICDEV to use a local lportdb argument
and to have the caller explicitly say that a device is at the end of the
fabric list.

MFC after:	1 week
2002-04-04 23:46:01 +00:00
John Baldwin
6008862bc2 Change callers of mtx_init() to pass in an appropriate lock type name. In
most cases NULL is passed, but in some cases such as network driver locks
(which use the MTX_NETWORK_LOCK macro) and UMA zone locks, a name is used.

Tested on:	i386, alpha, sparc64
2002-04-04 21:03:38 +00:00
Matt Jacob
1923f73990 Redo stuff for sparc64- primarily fix bus dma implementation. The endian
stuff was right, but the busdma stuff was massively not right.

Didn't really test on ia64 or i386- don't have the former h/w and my
FreeBSD-current disk is unwell right now. Hope that this is okay.

MFC after:	1 week
2002-04-02 23:36:14 +00:00
Matt Jacob
d134aa0b20 More for f/w crash dumps (bug fixing and adding ioctl entry points
and hints to enable for specific units)

MFC after:	1 week
2002-02-18 00:00:34 +00:00
Matt Jacob
3f02619fb8 Hints for WWN are now WWNN and/or WWPN.
MFC after:	1 week
2002-02-17 06:34:21 +00:00
Matt Jacob
75c1e828c0 + A variety of 23XX changes:
disable MWI on 2300

	based on function code, set an 'isp_port' for the 2312- it's a
	separate instance, but the NVRAM is shared, and the second port's
	NVRAM is at offset 256.

+ Enable RIO operation for LVD SCSI cards. This makes a *big* difference
as even under reasonable load we get batched completions of about 30
commands at a time on, say, an ISP1080.

+ Do 'continuation' mailbox commands- this allows us to specify a work
area within the softc and 'continue' repeated mailbox commands. This is
more or less on an ad hoc basis and is currently only used for firmware
loading (which f/w now loads substantially faster becuase the calling
thread is only woken when all the f/w words are loaded- not for each
one of the 40000 f/w words that gets loaded).

+ If we're about to return from isp_intr with a 'bogus interrupt' indication,
and we're not a 23XX card, check to see whether the semaphore register is
currently *2* (not *1* as it should be) and whether there's an async completion
sitting in outgoing mailbox0. This seems to capture cases of lost fast posting
and RIO interrupts that the 12160 && 1080 have been known to pump out under
extreme load (extreme, as in > 250 active commands).

+ FC_SCRATCH_ACQUIRE/FC_SCRATCH_RELEASE macros.

+ Endian correct swizzle/unswizzle of an ATIO2 that has a WWPN in it.

MFC after:	1 week
2002-02-04 21:04:25 +00:00
Matt Jacob
4fd13c1ba2 Major restructuring for swizzling to the request queue and unswizzling from
the response queue. Instead of the ad hoc ISP_SWIZZLE_REQUEST, we now have
a complete set of inline functions in isp_inline.h. Each platform is
responsible for providing just one of a set of ISP_IOX_{GET,PUT}{8,16,32}
macros.

The reason this needs to be done is that we need to have a single set of
functions that will work correctly on multiple architectures for both little
and big endian machines. It also needs to work correctly in the case that
we have the request or response queues in memory that has to be treated
specially (e.g., have ddi_dma_sync called on it for Solaris after we update
it or before we read from it). It also has to handle the SBus cards (for
platforms that have them) which, while on a Big Endian machine, do *not*
require *most* of the request/response queue entry fields to be swizzled
or unswizzled.

One thing that falls out of this is that we no longer build requests in the
request queue itself. Instead, we build the request locally (e.g., on the
stack) and then as part of the swizzling operation, copy it to the request
queue entry we've allocated. I thought long and hard about whether this was
too expensive a change to make as it in a lot of cases requires an extra
copy. On balance, the flexbility is worth it. With any luck, the entry that
we build locally stays in a processor writeback cache (after all, it's only
64 bytes) so that the cost of actually flushing it to the memory area that is
the shared queue with the PCI device is not all that expensive. We may examine
this again and try to get clever in the future to try and avoid copies.

Another change that falls out of this is that MEMORYBARRIER should be taken
a lot more seriously. The macro ISP_ADD_REQUEST does a MEMORYBARRIER on the
entry being added. But there had been many other places this had been missing.
It's now very important that it be done.

Additional changes:

Fix a longstanding buglet of sorts. When we get an entry via isp_getrqentry,
the iptr value that gets returned is the value we intend to eventually plug
into the ISP registers as the entry *one past* the last one we've written-
*not* the current entry we're updating. All along we've been calling sync
functions on the wrong index value. Argh. The 'fix' here is to rename all
'iptr' variables as 'nxti' to remember that this is the 'next' pointer-
not the current pointer.

Devote a single bit to mboxbsy- and set aside bits for output mbox registers
that we need to pick up- we can have at least one command which does not
have any defined output registers (MBOX_EXECUTE_FIRMWARE).

MFC after:	2 weeks
2001-12-11 00:18:45 +00:00
Matt Jacob
3bd4033010 Whups- remember to zero the isr pointer arg. 2001-10-06 19:34:43 +00:00
Matt Jacob
db4fa023f8 Respect QLogic's errata- read BIU_ISR even on the 2300
to see if there's an interrupt (avoids PCI parity errors
which can occur on the 2312 if you access some registers
from the host at the same time the RISC on the 2312 is
C accessing them).

MFC after:	1 day
2001-10-06 19:19:24 +00:00
Matt Jacob
b96934e89a If we're on an interrupt stack, mark things so that we don't try
and cv_wait for mailbox commands to complete if we start them from
here.

Fix residuals for target mode such that we only check the residual and
set it in the CTIO if this is the last CTIO (when we're sending status).

MFC after:	4 weeks
2001-09-04 21:45:57 +00:00
Matt Jacob
126ec86486 Add 2 Gigabit Fibre Channel support (2300 && 2312 cards). This required
some reworking (and consequent cleanup) of the interrupt service code.

Also begin to start a cleanup of target mode support that will (eventually)
not require more inforamtion routed with the ATIO to come back with the
CTIO other than tag.

MFC after:	4 weeks
2001-08-31 21:39:04 +00:00
Matt Jacob
559a1ad2c1 Some possibly helpful casts. 2001-07-04 18:51:58 +00:00
Peter Wemm
22941bd78f Fix warnings:
554: passing arg 4 of `resource_string_value' from incompatible pointer type
576: passing arg 4 of `resource_string_value' from incompatible pointer type
593: passing arg 4 of `resource_string_value' from incompatible pointer type
2001-06-15 00:13:18 +00:00
Matt Jacob
5d57194434 Spring MegaChange #1.
----

Make a device for each ISP- really usable only with devfs and add an ioctl
entry point (this can be used to (re)set debug levels, reset the HBA,
rescan the fabric, issue lips, etc).

----

Add in a kernel thread for Fibre Channel cards. The purpose of this
thread is to be woken up to clean up after Fibre Channel events
block things.  Basically, any FC event that casts doubt on the
location or identify of FC devices blocks the queues. When, and
if, we get the PORT DATABASE CHANGED or NAME SERVER DATABASE CHANGED
async event, we activate the kthread which will then, in full thread
context, re-evaluate the local loop and/or the fabric. When it's
satisfied that things are stable, it can then release the blocked
queues and let commands flow again.

The prior mechanism was a lazy evaluation. That is, the next command
to come down the pipe after change events would pay the full price
for re-evaluation. And if this was done off of a softcall, it really
could hang up the system.

These changes brings the FreeBSD port more in line with the Solaris,
Linux and NetBSD ports. It also, more importantly, gets us being
more proactive about topology changes which could then be reflected
upwards to CAM so that the periph driver can be informed sooner
rather than later when things arrive or depart.

---

Add in the (correct) usage of locking macros- we now have lock transition
macros which allow us to transition from holding the CAM lock (Giant)
and grabbing the softc lock and vice versa. Switch over to having this
HBA do real locking. Some folks claim this won't be a win. They're right.
But you have to start somewhere, and this will begin to teach us how
to DTRT for HBAs, etc.

--

Start putting in prototype 2300 support.  Add back in LIP
and Loop Reset as async events that each platform will handle.
Add in another int_bogus instrumentation point.

Do some more substantial target mode cleanups.

MFC after:	8 weeks
2001-05-28 21:20:43 +00:00
Matt Jacob
e9a2738ad1 Complete some Ansification. Check to make sure, in tdma_mk, that we won't
overflow the request queue. The reason we want to do this is that we
now push out completed CTIOs as we complete them- this gets the QLogic
working on them quicker. So we need to know whether we can put the entire
burrito out before we start.

We now support conjoint status with data for the last CTIO for both Fibre
Channel and SCSI. Leave the old code in place in case we need to go back
(minor 3 line ifdef).

Ultra-ultra important- *don't* set rq->req_seg_count for non-data
target mode requests in isp_pci_dmasetup. D'oh- this is actually
the tag value area for a CTIO. What *was* I thinking? Boy howdy
does both aic7xxx and sym get awfully unhappy when on reconnect
you give them a constant '1' for a tag value.
2001-04-04 21:53:59 +00:00
Matt Jacob
b72b15696c For parallel SCSI, let us now do status with the final CTIO. For the 1080,
I was hanging after sending a xfer CTIO and a status CTIO for a non-discon
INQUIRY- the xfer CTIO was returned as completed OK, but the status CTIO
was dropped on the floor. All the fields looked good. I don't know why
it got dropped. But allowing status to go back with data xfer seemed to
work. I also noticed that with a non-disconnecting command that the
firmware handle in the ATIO is zero- this leads me to believe that the
f/w really can only handle one CTIO at a time in the discon case, and
it had no idea what to do with the second (status) CTIO.
2001-03-21 00:49:37 +00:00
Matt Jacob
d8d5f2adc5 more 32 to 16 bit handle conversions 2001-03-04 18:42:51 +00:00
Matt Jacob
5f5aafe1fc Switch to using 16 bit handles instead of 32 bit handles.
This is a pretty invasive change, but there are three good
reasons to do this:

1. We'll never have > 16 bits of handle.
2. We can (eventually) enable the RIO (Reduced Interrupt Operation)
bits which return multiple completing 16 bit handles in mailbox
registers.
3. The !)$*)$*~)@$*~)$* Qlogic target mode for parallel SCSI spec
changed such that at_reserved (which was 32 bits) was split into
two pieces- and one of which was a 16 bit handle id that functions
like the at_rxid for Fibre Channel (a tag for the f/w to correlate
CTIOs with a particular command). Since we had to muck with that
and this changed the whole handler architecture, we might as well...

Propagate new at_handle on through int ct_fwhandle. Follow
implications of changing to 16 bit handles.

These above changes at least get Qlogic 1040 cards working in target
mode again. 1080/12160 cards don't work yet.

In isp.c:
Prepare for doing all loop management in outer layers.
2001-03-02 06:28:55 +00:00
Mark Murray
ed34d0ade2 Turn on interrupt-entropy harvesting for all/any mass storage devices
I could find. I have no doubt missed a couple.

Interrupt entropy harvesting is still conditional on the
kern.random.sys.harvest_interrupt sysctl.
2001-03-01 17:09:09 +00:00
Matt Jacob
6e5c5328c4 Eliminate the use of the getenv_int stuff we'd been using (with a bitmap
for selecting unit). Instead, use the resource hints mechanism.

One unfortunate situation here is that there is no resource_quad_value
function- which is what I needed for WWN boot time replacement. Worse-
you can't store the hint as just plain

hint.isp.0.nodewwn="0x50000000aaaa0001"

because this gets interpreted as an int- incorrectly because it can't
be converted to an int. I can't even get this as a string. To work
around this particular case for nodewwn && portwwn setting, this
rather grotesque form will be used:

hint.isp.0.nodewwn="w50000000aaaa0001"
hint.isp.0.portwwn="w50000000aaaa0002"

At the same time, if we have no hinted WWN, set the default WWN (which, btw,
gets overridden if the card has valid NVRAM, which is usual) to
0x400000007F000009ull (which translates to NAA == IPv4, 127.0.0.9).

Eliminate more printf's and replace them either with device_printf or
isp_prt calls.
2001-03-01 02:21:36 +00:00
Matt Jacob
b9b599fe4c Shuffle around how we do isp_disable management- make sure we return 0 so
the unit number doesn't get reused.

Make sure that if we've compiled for ISP_TARGET_MODE we set the
default role to be ISP_ROLE_INITIATOR|ISP_ROLE_TARGET.

Do some misc other cleanups.
2001-02-11 03:53:23 +00:00
Matt Jacob
df1590c05d Set default adapter role. 2001-01-15 18:36:39 +00:00
Matt Jacob
3486bfe084 add missing length argument 2001-01-09 02:12:42 +00:00
Matt Jacob
f09b192280 Set up to do a local interrupt fielding before calling common code-
allows us to grab lock as we should.
2000-12-29 19:10:16 +00:00
David Malone
7cc0979fd6 Convert more malloc+bzero to malloc+M_ZERO.
Submitted by:	josh@zipperup.org
Submitted by:	Robert Drehmel <robd@gmx.net>
2000-12-08 21:51:06 +00:00
Matt Jacob
f7dddf8a54 Remove more printfs and use either isp_prt or device_printf. Remember
to set ISP_LOGINFO if bootverbose is set.
2000-12-05 07:38:41 +00:00
Matt Jacob
3395b0568a Whoops! Forgot to commit this when I committed the other (turnin on locks)
change. Sorry about that.
2000-10-25 04:40:49 +00:00
Poul-Henning Kamp
db7e3af111 Remove unneeded #include <machine/clock.h> 2000-10-15 14:19:01 +00:00
Matt Jacob
aa57fd6fa5 some copyright cleanups 2000-09-21 20:16:04 +00:00
Matt Jacob
e11a1ee870 Per msmith's request, don't attach to Qlogic 12160 id'd cards that have
a certain SubVendorID.
2000-09-07 20:27:40 +00:00
Doug Rabson
21c3015a24 * Completely rewrite the alpha busspace to hide the implementation from
the drivers.
* Remove legacy inx/outx support from chipset and replace with macros
  which call busspace.
* Rework pci config accesses to route through the pcib device instead of
  calling a MD function directly.

With these changes it is possible to cleanly support machines which have
more than one independantly numbered PCI busses. As a bonus, the new
busspace implementation should be measurably faster than the old one.
2000-08-28 21:48:13 +00:00
Matt Jacob
84267b9edd remove clause 3 licence 2000-08-27 23:39:23 +00:00
Matt Jacob
d02373f1a0 Part of major rewrite for core version 2.0- clarification of
mdvec structure, removal of printf/CFGPRINTF in place of isp_prt
calls. Parameterization of RQUEST_QUEUE_LEN/RESULT_QUEUE_LEN.
2000-08-01 05:16:49 +00:00
Matt Jacob
05fbcbb000 Keep interrupts blocked for all of isp_pci_attach. Redo DMA routines
for target mode for cleanliness and accuracy.
2000-07-18 06:40:22 +00:00
Matt Jacob
469b6b9efb Change startup locking. Use new isp_handle_index function
for indexing off of handles to get dma maps.
2000-07-04 01:01:15 +00:00
Matt Jacob
56aef50302 Clean up firmware load issues and remove darn near all config options.
Force alphas to prefer mem mapping as the default.

Basically, we have a pointer to a function which we can call which will
return us a pointer to firmware for the card we have. We call this function
(if it's non-NULL) with the address of our mdvec f/w pointer.

The way this works is that if ispfw (as a module or a static) is loaded,
it initializes the pointer in isp_pci, so we can call into to it to fetch
a pointer to a f/w set.

If ispfw is MOD_UNLOADed, it's retained a pointer to our mdvec f/w pointers,
which then get zeroed out so we don't have any references to data that's
now gone from kernel memory. Removing the f/w saves ~360KBytes.

Alas, there is no autounload mechanism that works for is here.
2000-06-18 05:18:55 +00:00
Matt Jacob
2e56bc770d Clean up defines for correct 12160/1080 exclusion. Final 4.0.
approved: JKH
2000-02-29 05:48:46 +00:00
Matt Jacob
e142669a43 If the CDB length is greater than 12 for parallel SCSI, ispscsicmd has
made the initial queue entry a EXTENDED CMD queue entry, so we have to
go straight to continuation segments for any data segments.

approved: jkh
2000-02-15 00:50:01 +00:00
Matt Jacob
960f6939af Add in 12160 (Ultra3) support. Redo things to use the newbus code.
Approved: jkh@freebsd.org

PR:		16141
2000-02-11 19:45:17 +00:00
Matt Jacob
003a310f5f Remove compile warning not seen when compiling with target mode enabled. 2000-01-15 07:06:44 +00:00
Matt Jacob
65b024e1bf Redo FC target mode dma routine to try and generate an extra CTIO
in the not so odd case of Moving Data *AND* Sending Status in last CTIO *AND*
status is a CHECK CONDITION *AND* we have Sense Data to send.
2000-01-15 01:54:36 +00:00
Matt Jacob
4242692117 Add in an isp_tdebug environment variable. Clean up some debugging
printouts for clarity.
2000-01-04 03:41:40 +00:00
Matt Jacob
9e11e5bea2 Support target mode operations. This involves having some variant
dma mapping callback routines to select from as target mode
entries are handled a fair bit differently from normal initiator
mode entries.
2000-01-03 23:50:13 +00:00
Matt Jacob
22e1dc858b Add Dual LVD bus (1280) support 1999-12-16 05:42:02 +00:00
Matt Jacob
9637d68c97 Fix dmasetup functions to have 16 bit queue indices. Get the chip revision
out of the PCI CLASS reg and store it in the softc. Use the getenv_quad
function to get a WWN override from the environment. Look for a config
value for same. Make slightly less lame the wwn seed construction.
1999-11-21 02:56:17 +00:00
Andrew Gallatin
a3f09ae6e1 Remove calls to alpha_register_pci_scsi(). After Mike's recent boot
changes, it no longer exists and is preventing alpha kernels from building.

reviewed by: msmith
1999-11-05 13:10:39 +00:00
Matt Jacob
fed92c475e Organize things to cope with the (possible) lack of downloadable
firmware a bit better.
1999-10-30 19:35:11 +00:00
Matt Jacob
a95ae1936f Add in inclusion of machine/md_var.h (so alpha_scsi_bus_register or what
have you is prototyped). Removed code versions in md struct- not used
any more. Allocate transfer dma maps and xflist stuff in mbxdmasetup based
upon isp->isp_maxcmds. Allow for multiple calls to mbxdmasetup (for
isp_reset cases).
1999-10-17 19:03:11 +00:00
Matt Jacob
d23245c01c remove unnecessary includes 1999-10-11 19:30:59 +00:00
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00