This changes from a line discipline to the tty_hooks mechanism. Data will come
in directly via rint_bypass and sent to the peer node in a single mbuf.
As line disciplines are no longer used a new netgraph command called
NGM_TTY_SET_TTY is used to attach the tty. This takes a pointer to to the open
file descriptor of the tty and registers the tty hooks. When the tty disappears
the node will shutdown.
Thanks to: ed
Sponsored by: Hobnob, Inc
Update referenced example to include unistd.h per manpage.
Update example to be more style(9)-ish, silence warnings and add
FreeBSD id to the source file.
- Document the minor(3), major(3) and makedev(3) macro's. They also
apply to umajor() and uminor() in the kernel, but hopefully we'll sort
that out one day.
- Briefly dev2unit() inside the make_dev(9) manual page, since this is
now the preferred macro to obtain character device unit numbers inside
the kernel.
- Remove the device_ids(9) manual page. It contains highly inaccurate
information, such as a description of the nonexistent major().
To prevent any further confusion about device minor and unit numbers,
we'd better just refer to device unit numbers. Many people still think
the numbers we show inside devfs have any relation to the numbers passed
to make_dev(9), which is not the case.
Discussed with: kib
It seems this script was broken because of the SYSINIT changes and a
rather awkward variable initialisation. For some reason the
make_device_driver.sh script is also broken, related to BUS_SETUP_INTR.
I have no experience with FreeBSD's interrupt handling, so I hope
someone else is willing to take a look at that shell script.
PR: misc/126435
MFC after: 1 month
control over the result of buildworld and installworld; this especially
helps packaging systems such as nanobsd
Reviewed by: various (posted to arch)
MFC after: 1 month
years by the priv_check(9) interface and just very few places are left.
Note that compatibility stub with older FreeBSD version
(all above the 8 limit though) are left in order to reduce diffs against
old versions. It is responsibility of the maintainers for any module, if
they think it is the case, to axe out such cases.
This patch breaks KPI so __FreeBSD_version will be bumped into a later
commit.
This patch needs to be credited 50-50 with rwatson@ as he found time to
explain me how the priv_check() works in detail and to review patches.
Tested by: Giovanni Trematerra <giovanni dot trematerra at gmail dot com>
Reviewed by: rwatson
Show the b_dep value for the buffer in the show buffer command.
Add a comand to dump the dirty/clean buffer list for vnode.
Reviewed by: tegge
Tested and used by: pho
MFC after: 1 month
As reported by several users on the mailing lists, applications like
screen(1) fail to properly handle ^S and ^Q characters. This was because
MPSAFE TTY didn't implement packet mode (TIOCPKT) yet. Add basic packet
mode support to make these applications work again.
Obtained from: //depot/projects/mpsafetty/...
o List all devices FreeBSD supports (more on the way)
o Sort the list of supported devices
o Note this was introduced with FreeBSD 7.0
o Include the FreeBSD configuration synopsis
o Bump the man page date
o Put $FreeBSD$ where all the other usb man pages have it.
And add to build.
too, so, instead of descending to the i386 directory, we add some magic to
the parent Makefile.
These man pages refer to drivers that I'm aware that work on amd64. Most
likely there are more, but I'll deal with them later.
Approved by: brueffer, philip, takawata
The last half year I've been working on a replacement TTY layer for the
FreeBSD kernel. The new TTY layer was designed to improve the following:
- Improved driver model:
The old TTY layer has a driver model that is not abstract enough to
make it friendly to use. A good example is the output path, where the
device drivers directly access the output buffers. This means that an
in-kernel PPP implementation must always convert network buffers into
TTY buffers.
If a PPP implementation would be built on top of the new TTY layer
(still needs a hooks layer, though), it would allow the PPP
implementation to directly hand the data to the TTY driver.
- Improved hotplugging:
With the old TTY layer, it isn't entirely safe to destroy TTY's from
the system. This implementation has a two-step destructing design,
where the driver first abandons the TTY. After all threads have left
the TTY, the TTY layer calls a routine in the driver, which can be
used to free resources (unit numbers, etc).
The pts(4) driver also implements this feature, which means
posix_openpt() will now return PTY's that are created on the fly.
- Improved performance:
One of the major improvements is the per-TTY mutex, which is expected
to improve scalability when compared to the old Giant locking.
Another change is the unbuffered copying to userspace, which is both
used on TTY device nodes and PTY masters.
Upgrading should be quite straightforward. Unlike previous versions,
existing kernel configuration files do not need to be changed, except
when they reference device drivers that are listed in UPDATING.
Obtained from: //depot/projects/mpsafetty/...
Approved by: philip (ex-mentor)
Discussed: on the lists, at BSDCan, at the DevSummit
Sponsored by: Snow B.V., the Netherlands
dcons(4) fixed by: kan
Now we have a single /dev/snp device node, which can be opened by
watch(8) multiple times. Even though snp(4) will be dead as of next
week, it's nice having this in SVN, because:
- We may want to MFC it to RELENG_7.
- By the time we fix snp(4) again, it's already there, existing watch(8)
binaries should already work.
Just like bpf(4), I'm adding a symlink from snp0 to snp to remain binary
compatible.
bpf(4) now uses cdevpriv to distinguish multiple file descriptors, where
it used to be implemented using device cloning. Ports like libpcap
properly detect the change in their configure scripts, but it doesn't
hurt to increase __FreeBSD_version.
While there, change the bpf(4) manual page to refer to /dev/bpf instead
of /dev/bpfN.
Requested by: mlaier
This driver supports GW3887 based chipsets and works on
x86/powerpc/sparc64. You need upgtfw kernel module before loading
upgt(4). Please see the manpage.
Obtained from: OpenBSD
features of CPUs like reading/writing machine-specific registers,
retrieving cpuid data, and updating microcode.
- Add cpucontrol(8) utility, that provides userland access to
the features of cpuctl(4).
- Add subsequent manpages.
The cpuctl(4) device operates as follows. The pseudo-device node cpuctlX
is created for each cpu present in the systems. The pseudo-device minor
number corresponds to the cpu number in the system. The cpuctl(4) pseudo-
device allows a number of ioctl to be preformed, namely RDMSR/WRMSR/CPUID
and UPDATE. The first pair alows the caller to read/write machine-specific
registers from the correspondent CPU. cpuid data could be retrieved using
the CPUID call, and microcode updates are applied via UPDATE.
The permissions are inforced based on the pseudo-device file permissions.
RDMSR/CPUID will be allowed when the caller has read access to the device
node, while WRMSR/UPDATE will be granted only when the node is opened
for writing. There're also a number of priv(9) checks.
The cpucontrol(8) utility is intened to provide userland access to
the cpuctl(4) device features. The utility also allows one to apply
cpu microcode updates.
Currently only Intel and AMD cpus are supported and were tested.
Approved by: kib
Reviewed by: rpaulo, cokane, Peter Jeremy
MFC after: 1 month
- Fix dates in 2008/2009 for Africa/Mauritius.
- Leap second notification for the end of 2008.
Approved by: bde (mentor, implicit), des
MFC after: 1 week
- Mauritius will have a DST experiment between 2008-11-01 and 2009-03-31.
- Add/Fix historical data for C-Eur, the SovietZone, Germany,
Bahamas, San Luis.
- Add information about West Para (America/Santarem)
- America/Eirunepe and America/Rio_Branco go to UTC-4
Approved by: bde (mentor, implicit), des
MFC after: 1 week
- Africa/Morocco will have DST in 2008.
- Asia/Choibalsan should be GMT+08:00.
- Asia/Pakistan will have DST in 2008.
Also set all the svn:eol-style properties to native.
Approved by: bde (mentor, implicit), des
MFC after: 1 week
Remove Theory, which isn't part of the zoneinfo module but came out
of /head/usr.sbin/zic (and isn't installed from there neither).
Approved by: bde (implicit)
MFC after: 1 week
msleep/mtx_sleep or the various cv_*wait*() routines. Currently, the
"unlock" behavior of PDROP and cv_wait_unlock() with Giant is not
permitted as it is will be confusing since Giant is fully unrecursed and
unlocked during a thread sleep.
This is handy for subsystems which wish to allow unlocked drivers to
continue to use Giant such as CAM, the new TTY layer, and the new USB
stack. CAM currently uses a hack that I told Scott to use because I
really didn't want to permit this behavior, and the TTY and USB patches
both have various patches to permit this.
MFC after: 2 weeks
yank it's description; likewise for the FIRMWARE_WAIT flag to firmware_put.
For the record, the last commit was to cleanup various mistakes and correct
the example of embedding to reflect the npe firmware now being distributed
with the system.