pack a set number correctly.
Submitted by: oleg
o Plug a memory leak.
Submitted by: oleg and Andrey V. Elsukov
Approved by: re (kensmith)
MFC after: 1 week
Also rename the related functions in a similar way.
There are no functional changes.
For a packet coming in with IPsec tunnel mode, the default is
to only call into the firewall with the "outer" IP header and
payload.
With this option turned on, in addition to the "outer" parts,
the "inner" IP header and payload are passed to the
firewall too when going through ip_input() the second time.
The option was never only related to a gif(4) tunnel within
an IPsec tunnel and thus the name was very misleading.
Discussed at: BSDCan 2007
Best new name suggested by: rwatson
Reviewed by: rwatson
Approved by: re (bmah)
- to show a specific set: ipfw set 3 show
- to delete rules from the set: ipfw set 9 delete 100 200 300
- to flush the set: ipfw set 4 flush
- to reset rules counters in the set: ipfw set 1 zero
PR: kern/113388
Submitted by: Andrey V. Elsukov
Approved by: re (kensmith)
MFC after: 6 weeks
Before:
$ ipfw -n add 100 count icmp from any to any mac-type 0x01
00100 count icmp 0x0001
$ ipfw -n add 100 count icmp from any to any mac any any
00100 count icmp MAC any any any
After:
$ ipfw -n add 100 count icmp from any to any mac-type 0x01
00100 count icmp from any to any mac-type 0x0001
$ ipfw -n add 100 count icmp from any to any mac any any
00100 count icmp from any to any MAC any any
PR: bin/112244
Submitted by: Andrey V. Elsukov
MFC after: 1 month
With the second (and last) part of my previous Summer of Code work, we get:
-ipfw's in kernel nat
-redirect_* and LSNAT support
General information about nat syntax and some examples are available
in the ipfw (8) man page. The redirect and LSNAT syntax are identical
to natd, so please refer to natd (8) man page.
To enable in kernel nat in rc.conf, two options were added:
o firewall_nat_enable: equivalent to natd_enable
o firewall_nat_interface: equivalent to natd_interface
Remember to set net.inet.ip.fw.one_pass to 0, if you want the packet
to continue being checked by the firewall ruleset after being
(de)aliased.
NOTA BENE: due to some problems with libalias architecture, in kernel
nat won't work with TSO enabled nic, thus you have to disable TSO via
ifconfig (ifconfig foo0 -tso).
Approved by: glebius (mentor)
address, to avoid confusing the users that a full address is
always required.
Submitted by: Josh Paetzel <josh@tcbug.org> (through freebsd-doc)
MFC after: 3 days
otherwise this command
ipfw add allow ipv6-icmp from any to 2002::1 icmp6types 1,2,128,129
turns into icmp6types 1,2,32,33,34,...94,95,128,129
PR: 102422 (part 1)
Submitted by: Andrey V. Elsukov <bu7cher at yandex.ru>
MFC after: 5 days
having trouble with the "me6" keyword. Also, we were using inet_pton on
the wrong variable in one place.
Reviewed by: mlaier (previous version of patch)
Obtained from: Sascha Blank (inet_pton change)
MFC after: 1 week
for example:
fwd tablearg ip from any to table(1)
where table 1 has entries of the form:
1.1.1.0/24 10.2.3.4
208.23.2.0/24 router2
This allows trivial implementation of a secondary routing table implemented
in the firewall layer.
I expect more work (under discussion with Glebius) to follow this to clean
up some of the messy parts of ipfw related to tables.
Reviewed by: Glebius
MFC after: 1 month
- 'tag' & 'untag' action parameters.
- 'tagged' & 'limit' rule options.
Rule examples:
pipe 1 tag tablearg ip from table(1) to any
allow ip from any to table(2) tagged tablearg
allow tcp from table(3) to any 25 setup limit src-addr tablearg
sbin/ipfw/ipfw2.c:
1) new macros
GET_UINT_ARG - support of 'tablearg' keyword, argument range checking.
PRINT_UINT_ARG - support of 'tablearg' keyword.
2) strtoport(): do not silently truncate/accept invalid port list expressions
like: '1,2-abc' or '1,2-3-4' or '1,2-3x4'. style(9) cleanup.
Approved by: glebius (mentor)
MFC after: 1 month
Since tags are kept while packet resides in kernelspace, it's possible to
use other kernel facilities (like netgraph nodes) for altering those tags.
Submitted by: Andrey Elsukov <bu7cher at yandex dot ru>
Submitted by: Vadim Goncharov <vadimnuclight at tpu dot ru>
Approved by: glebius (mentor)
Idea from: OpenBSD PF
MFC after: 1 month
doesn't exist or add one that is already present, if the -q flag
is set. Useful for "ipfw -q /dev/stdin" when the command above is
invoked from something like python or TCL to feed commands
down the throat of ipfw.
MFC in: 1 week
action argument with the value obtained from table lookup. The feature
is now applicable only to "pipe", "queue", "divert", "tee", "netgraph"
and "ngtee" rules.
An example usage:
ipfw pipe 1000 config bw 1000Kbyte/s
ipfw pipe 4000 config bw 4000Kbyte/s
ipfw table 1 add x.x.x.x 1000
ipfw table 1 add x.x.x.y 4000
ipfw pipe tablearg ip from table(1) to any
In the example above the rule will throw different packets to different pipes.
TODO:
- Support "skipto" action, but without searching all rules.
- Improve parser, so that it warns about bad rules. These are:
- "tablearg" argument to action, but no "table" in the rule. All
traffic will be blocked.
- "tablearg" argument to action, but "table" searches for entry with
a specific value. All traffic will be blocked.
- "tablearg" argument to action, and two "table" looks - for src and
for dst. The last lookup will match.
IPv6 support was committed:
- Stop treating `ip' and `ipv6' as special in `proto' option as they
conflict with /etc/protocols.
- Disuse `ipv4' in `proto' option as it is corresponding to `ipv6'.
- When protocol is specified as numeric, treat it as it is even it is
41 (ipv6).
- Allow zero for protocol as it is valid number of `ip'.
Still, we cannot specify an IPv6 over an IPv4 tunnel like before such
as:
pass ipv6 from any to any
But, now, you can specify it like:
pass ip4 from any to any proto ipv6
PR: kern/89472
Reported by: Ga l Roualland <gael.roualland__at__dial.oleane.com>
MFC after: 1 week
that debug.mpsafenet be set to 0. It is still possible for dead locks to
occur while these filtering options are used due to the layering violation
inherent in their implementation.
Discussed: -current, rwatson, glebius
* Correct handling of IPv6 Extension Headers.
* Add unreach6 code.
* Add logging for IPv6.
Submitted by: sysctl handling derived from patch from ume needed for ip6fw
Obtained from: is_icmp6_query and send_reject6 derived from similar
functions of netinet6,ip6fw
Reviewed by: ume, gnn; silence on ipfw@
Test setup provided by: CK Software GmbH
MFC after: 6 days
policy. It may be used to provide more detailed classification of
traffic without actually having to decide its fate at the time of
classification.
MFC after: 1 week
This is the last requirement before we can retire ip6fw.
Reviewed by: dwhite, brooks(earlier version)
Submitted by: dwhite (manpage)
Silence from: -ipfw
with the kernel compile time option:
options IPFIREWALL_FORWARD_EXTENDED
This option has to be specified in addition to IPFIRWALL_FORWARD.
With this option even packets targeted for an IP address local
to the host can be redirected. All restrictions to ensure proper
behaviour for locally generated packets are turned off. Firewall
rules have to be carefully crafted to make sure that things like
PMTU discovery do not break.
Document the two kernel options.
PR: kern/71910
PR: kern/73129
MFC after: 1 week
This commit replaces those with two new functions that simplify the code
and produce warnings that the syntax is deprecated. A small number of
sensible abbreviations may be explicitly added based on user feedback.
There were previously three types of strncmp use in ipfw:
- Most commonly, strncmp(av, "string", sizeof(av)) was used to allow av
to match string or any shortened form of it. I have replaced this
with a new function _substrcmp(av, "string") which returns 0 if av
is a substring of "string", but emits a warning if av is not exactly
"string".
- The next type was two instances of strncmp(av, "by", 2) which allowed
the abbreviation of bytes to "by", "byt", etc. Unfortunately, it
also supported "bykHUygh&*g&*7*ui". I added a second new function
_substrcmp2(av, "by", "bytes") which acts like the strncmp did, but
complains if the user doesn't spell out the word "bytes".
- There is also one correct use of strncmp to match "table(" which might
have another token after it without a space.
Since I changed all the lines anyway, I also fixed the treatment of
strncmp's return as a boolean in many cases. I also modified a few
strcmp cases as well to be fully consistent.
reversals+system lock ups if they are using ucred based rules
while running with debug.mpsafenet=1.
I am working on merging a shared locking mechanism into ipfw which
should take care of this problem, but it still requires a bit more
testing and review.
and sent to the DIVERT socket while the original packet continues with the
next rule. Unlike a normally diverted packet no IP reassembly attemts are
made on tee'd packets and they are passed upwards totally unmodified.
Note: This will not be MFC'd to 4.x because of major infrastucture changes.
PR: kern/64240 (and many others collapsed into that one)
contain O_UID, O_GID and O_JAIL opcodes, the F_NOT or F_OR logical
operator bits get clobbered. Making it impossible to use the ``NOT'' or
``OR'' operators with uid, gid and jail based constraints.
The ipfw_insn instruction template contains a ``len'' element which
stores two pieces of information, the size of the instruction
(in 32-bit words) in the low 6 bits of "len" with the 2 remaining
bits to implement OR and NOT.
The current code clobbers the OR and NOT bits by initializing the
``len'' element to the size, rather than OR'ing the bits. This change
fixes this by changing the initialization of cmd->len to an OR operation
for the O_UID, O_GID and O_JAIL opcodes.
This may be a MFC candidate for RELENG_5.
Reviewed by: andre
Approved by: luigi
PR: kern/63961 (partially)
keyword but without 'logamount' limit the amount of their log messages
by net.inet.ip.fw.verbose_limit sysctl value.
RELENG_5 candidate.
PR: kern/46080
Submitted by: Dan Pelleg
MFC after: 1 week
Since the only thing truly unique about a prison is it's ID, I figured
this would be the most granular way of handling this.
This commit makes the following changes:
- Adds tokenizing and parsing for the ``jail'' command line option
to the ipfw(8) userspace utility.
- Append the ipfw opcode list with O_JAIL.
- While Iam here, add a comment informing others that if they
want to add additional opcodes, they should append them to the end
of the list to avoid ABI breakage.
- Add ``fw_prid'' to the ipfw ucred cache structure.
- When initializing ucred cache, if the process is jailed,
set fw_prid to the prison ID, otherwise set it to -1.
- Update man page to reflect these changes.
This change was a strong motivator behind the ucred caching
mechanism in ipfw.
A sample usage of this new functionality could be:
ipfw add count ip from any to any jail 2
It should be noted that because ucred based constraints
are only implemented for TCP and UDP packets, the same
applies for jail associations.
Conceptual head nod by: pjd
Reviewed by: rwatson
Approved by: bmilekic (mentor)
For incoming packets, the packet's source address is checked if it
belongs to a directly connected network. If the network is directly
connected, then the interface the packet came on in is compared to
the interface the network is connected to. When incoming interface
and directly connected interface are not the same, the packet does
not match.
Usage example:
ipfw add deny ip from any to any not antispoof in
Manpage education by: ru
RTF_BLACKHOLE as well.
To quote the submitter:
The uRPF loose-check implementation by the industry vendors, at least on Cisco
and possibly Juniper, will fail the check if the route of the source address
is pointed to Null0 (on Juniper, discard or reject route). What this means is,
even if uRPF Loose-check finds the route, if the route is pointed to blackhole,
uRPF loose-check must fail. This allows people to utilize uRPF loose-check mode
as a pseudo-packet-firewall without using any manual filtering configuration --
one can simply inject a IGP or BGP prefix with next-hop set to a static route
that directs to null/discard facility. This results in uRPF Loose-check failing
on all packets with source addresses that are within the range of the nullroute.
Submitted by: James Jun <james@towardex.com>
o Add sanity checking to the firewall delete operation
which tells the user that a firewall rule
specification is required.
The previous behaviour was to exit without reporting any
errors to the user.
Approved by: bmilekic (mentor)
mac ipfw rules. The exact same sanity check is performed as
the first operation of add_mac(), so there is no sense
in doing it twice.
Approved by: bmilekic (mentor)
PR: bin/55981
source address of a packet exists in the routing table. The
default route is ignored because it would match everything and
render the check pointless.
This option is very useful for routers with a complete view of
the Internet (BGP) in the routing table to reject packets with
spoofed or unrouteable source addresses.
Example:
ipfw add 1000 deny ip from any to any not versrcreach
also known in Cisco-speak as:
ip verify unicast source reachable-via any
Reviewed by: luigi
rule, thus omitting the entire body.
This makes the output a lot more readable for complex rulesets
(provided, of course, you have annotated your ruleset appropriately!)
MFC after: 3 days
code is compiled in to support the O_IPSEC operator. Previously no
support was included and ipsec rules were always matching. Note that
we do not return an error when an ipsec rule is added and the kernel
does not have IPsec support compiled in; this is done intentionally
but we may want to revisit this (document this in the man page).
PR: 58899
Submitted by: Bjoern A. Zeeb
Approved by: re (rwatson)
if_xname, if_dname, and if_dunit. if_xname is the name of the interface
and if_dname/unit are the driver name and instance.
This change paves the way for interface renaming and enhanced pseudo
device creation and configuration symantics.
Approved By: re (in principle)
Reviewed By: njl, imp
Tested On: i386, amd64, sparc64
Obtained From: NetBSD (if_xname)
of do_cmd() broke things, because this function assumes that a socklen_t
is large enough to hold a pointer.
A real solution to this problem would be a rewrite of do_cmd() to
treat the optlen parameter consistently and not use it to carry
a pointer or integer dependent on the context.
Allow set 31 to be used for rules other than 65535.
Set 31 is still special because rules belonging to it are not deleted
by the "ipfw flush" command, but must be deleted explicitly with
"ipfw delete set 31" or by individual rule numbers.
This implement a flexible form of "persistent rules" which you might
want to have available even after an "ipfw flush".
Note that this change does not violate POLA, because you could not
use set 31 in a ruleset before this change.
Suggested by: Paul Richards
introduced in the latest commits).
Also:
* update the 'ipfw -h' output;
* allow rules of the form "100 add allow ..." i.e. with the index first.
(requested by Paul Richards). This was an undocumented ipfw1 behaviour,
and it is left undocumented.
and minor code cleanups.
* make the code compile with WARNS=5 (at least on i386), mostly
by adding 'const' specifier and replacing "void *" with "char *"
in places where pointer arithmetic was used.
This also spotted a few places where invalid tests (e.g. uint < 0)
were used.
* support ranges in "list" and "show" commands. Now you can say
ipfw show 100-1000 4000-8000
which is very convenient when you have large rulesets.
* implement comments in ipfw commands. These are implemented in the
kernel as O_NOP commands (which always match) whose body contains
the comment string. In userland, a comment is a C++-style comment:
ipfw add allow ip from me to any // i can talk to everybody
The choice of '//' versus '#' is somewhat arbitrary, but because
the preprocessor/readfile part of ipfw used to strip away '#',
I did not want to change this behaviour.
If a rule only contains a comment
ipfw add 1000 // this rule is just a comment
then it is stored as a 'count' rule (this is also to remind
the user that scanning through a rule is expensive).
* improve handling of flags (still to be completed).
ipfw_main() was written thinking of 'one rule per ipfw invocation',
and so flags are set and never cleared. With readfile/preprocessor
support, this changes and certain flags should be reset on each
line. For the time being, only fix handling of '-a' which
differentiates the "list" and "show" commands.
* rework the preprocessor support -- ipfw_main() already had most
of the parsing code, so i have moved in there the only missing
bit (stripping away '#' and comments) and removed the parsing
from ipfw_readfile().
Also, add some more options (such as -c, -N, -S) to the readfile
section.
MFC after: 3 days
spaces and comma-separated lists of arguments;
* reword the description of address specifications, to include
previous and current changes for address sets and lists;
* document the new '-n' flag.
* update the section on differences between ipfw1 and ipfw2
(this is becoming boring!)
MFC after: 3 days
* Make the addr-set size optional (defaults to /24)
You can now write 1.2.3.0/24{56-80} or 1.2.3.0{56-80}
Also make the parser more strict.
* Support a new format for the list of addresses:
1.2.3.4,5.6.7.8/30,9.10.11.12/22,12.12.12.13, ...
which exploits the new capabilities of O_IP_SRC_MASK/O_IP_DST_MASK
* Allow spaces after commas to make lists of addresses more readable.
1.2.3.4, 5.6.7.8/30, 9.10.11.12/22, 12.12.12.13, ...
* ipfw will now accept full commands as a single argument and strip
extra leading/trailing whitespace as below:
ipfw "-q add allow ip from 1.2.3.4 to 5.6.7.8, 9.10.11.23 "
This should help in moving the body of ipfw into a library
that user programs can invoke.
* Cleanup some comments and data structures.
* Do not print rule counters for dynamic rules with ipfw -d list
(PR 51182)
* Improve 'ipfw -h' output (PR 46785)
* Add a '-n' flag to test the syntax of commands without actually
calling [gs]etsockopt() (PR 44238)
* Support the '-n' flag also with the preprocessors;
Manpage commit to follow.
MFC after: 3 days
Should work with both regular and fast ipsec (mutually exclusive).
See manpage for more details.
Submitted by: Ari Suutari (ari.suutari@syncrontech.com)
Revised by: sam
MFC after: 1 week
1.2.3.4/24{5,6,7,10-20,60-90}
for set of ip addresses.
Previously you needed to specify every address in the range, which
was unconvenient and lead to very long lines.
Internally the set is still stored in the same way, just the
input and output routines are modified.
Manpage update still missing.
Perhaps a similar preprocessing step would be useful for port ranges.
MFC after: 3 days
"ipid" options. This feature has been requested by several users.
On passing, fix some minor bugs in the parser. This change is fully
backward compatible so if you have an old /sbin/ipfw and a new
kernel you are not in trouble (but you need to update /sbin/ipfw
if you want to use the new features).
Document the changes in the manpage.
Now you can write things like
ipfw add skipto 1000 iplen 0-500
which some people were asking to give preferential treatment to
short packets.
The 'MFC after' is just set as a reminder, because I still need
to merge the Alpha/Sparc64 fixes for ipfw2 (which unfortunately
change the size of certain kernel structures; not that it matters
a lot since ipfw2 is entirely optional and not the default...)
PR: bin/48015
MFC after: 1 week
comes in on is the same interface that we would route out of to get to
the packet's source address. Essentially automates an anti-spoofing
check using the information in the routing table.
Experimental. The usage and rule format for the feature may still be
subject to change.
width of fields for packets and bytes counters.
PR: bin/47196
Reviewed by: -audit
Not objected by: luigi, des
o Use %llu instead of deprecated %qu convert specification for ipfw
packets and bytes counters.
Noted by: des
MFC after: 1 month
default-to-deny firewall. Simply turning off IPFW via a preexisting
sysctl does the job. To make it more apparent (since nobody picked up
on this in a week's worth of flames), the boolean sysctl's have been
integrated into the /sbin/ipfw command set in an obvious and straightforward
manner. For example, you can now do 'ipfw disable firewall' or
'ipfw enable firewall'. This is far easier to remember then the
net.inet.ip.fw.enable sysctl.
Reviewed by: imp
MFC after: 3 days
after -p except for the last (the ruleset file to process) to the
preprocessor for interpretation. This allows command-line options besides
-U and -D to be passed to cpp(1) and m4(1) as well as making it easier to
use other preprocessors.
Sponsored By: NTT Multimedia Communications Labs
MFC after: 1 week
