This change implements a notification (via devctl) to userland when
the kernel produces coredumps after a process has crashed.
devd can then run a specific command to produce a human readable crash
report. The command is most usually a helper that runs gdb/lldb
commands on the file/coredump pair. It's possible to use this
functionality for implementing automatic generation of crash reports.
devd(8) will be notified of the full path of the binary that crashed and
the full path of the coredump file.
This was a discrepancy between ^/projects/building-blocks and ^/head that I
didn't resolve before committing the change to ^/head
Pointyhat to: me
Reported by: jhb
MFC after: 20 days
X-MFC with: r278249
Sponsored by: EMC / Isilon Storage Division
build/install without disrupting other dependent services (see r278249, et
al):
- MK_LOCATE
- MK_MAN
- MK_NLS
- MK_OPENSSL
- MK_PKGBOOTSTRAP
- MK_SENDMAIL
Additional flags need to be handled in etc/Makefile, but it requires
refactoring the relevant scripts in etc/rc.d/*
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division
and IPv6 rules in a single table. ipf -6 -Fa will flush the whole table,
including IPv4 rules. This patch removes the redundant ipf -I -6 -Fa
statement.
PR: 188318
MFC after: 2 weeks
https://wiki.freebsd.org/ReproducibleBuilds
The contrib/sendmail change will be made in the upstream source for a
future sendmail release.
Reviewed by: des
MFC after: 3 days
It tests that all FIBs get a static IPv6 loopback route.
Submitted by: asomers
MFC after: 1 week
Sponsored by: Spectra Logic
MFSpectraBSD: 1048456 on 2014/03/13
1114523 on 2015/01/23
Up to 7 archives of the log will be kept (just for consistency with the other
log rotation rules)
PR: 196788
MFC after: 1 week
Reviewed by: hselasky
Sponsored by: EMC / Isilon Storage Division
Some users build FreeBSD as non-root in Perforce workspaces. By default,
Perforce sets files read-only unless they're explicitly being edited.
As a result, the -f argument must be used to cp in order to override the
read-only flag when copying source files to object directories. Bare use of
'cp' should be avoided in the future.
Update all current users of 'cp' in the src tree.
Reviewed by: emaste
MFC after: 1 week
Sponsored by: Spectra Logic
periodic(8) run, taken from uname(1) '-U' and '-K'
flags.
Reviewed by: allanjude, dvl
Differential Revision: https://reviews.freebsd.org/D1541
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
contains the libraries for Address Sanitizer (asan), Undefined Behavior
Sanitizer (ubsan) and Profile Guided Optimization.
ASan is a fast memory error detector. It can detect the following types
of bugs:
Out-of-bounds accesses to heap, stack and globals
Use-after-free
Use-after-return (to some extent)
Double-free, invalid free
Memory leaks (experimental)
Typical slowdown introduced by AddressSanitizer is 2x.
UBSan is a fast and compatible undefined behavior checker. It enables a
number of undefined behavior checks that have small runtime cost and no
impact on address space layout or ABI.
PLEASE NOTE: the sanitizers still have some rough edges on FreeBSD,
particularly on i386. These will hopefully be smoothed out in the
coming time.
Differential Revision: https://reviews.freebsd.org/D1505
- Fix depend target by removing a space after an "-I" inclusion option.
- Fix some minor compile issues in the "osmtest" utility.
MFC after: 3 days
PR: 196580
Sponsored by: Mellanox Technologies
The SAMPLE message and notes where tab seperated for some parts and hence
displayed incorrectly unless tabstop was set to 8. Switch to spaces to it
displays correctly independent of the tabstop setting.
Sponsored by: Multiplay
The work in r258233 hardcoded the assumption that tests was the last component
of the tests tree by pushing tests as an explicit prefix for the paths in
BSD.tests.dist and /usr was the prefix for all tests, per BSD.usr.dist and all
of the mtree calls used in Makefile.inc1. This assumption breaks if/when one
provides a custom TESTSBASE "prefix", e.g. TESTSBASE=/mytests .
One thing that r258233 did properly though was remove "/usr/tests" creation
from BSD.usr.dist -- that should have not been there in the first place. That
was an "oops" on my part for the work that was originally committed in r241823
MFC after: 2 weeks
Phabric: D1301
Reviewed by: imp
Sponsored by: EMC / Isilon Storage Division
for counter mode), and AES-GCM. Both of these modes have been added to
the aesni module.
Included is a set of tests to validate that the software and aesni
module calculate the correct values. These use the NIST KAT test
vectors. To run the test, you will need to install a soon to be
committed port, nist-kat that will install the vectors. Using a port
is necessary as the test vectors are around 25MB.
All the man pages were updated. I have added a new man page, crypto.7,
which includes a description of how to use each mode. All the new modes
and some other AES modes are present. It would be good for someone
else to go through and document the other modes.
A new ioctl was added to support AEAD modes which AES-GCM is one of them.
Without this ioctl, it is not possible to test AEAD modes from userland.
Add a timing safe bcmp for use to compare MACs. Previously we were using
bcmp which could leak timing info and result in the ability to forge
messages.
Add a minor optimization to the aesni module so that single segment
mbufs don't get copied and instead are updated in place. The aesni
module needs to be updated to support blocked IO so segmented mbufs
don't have to be copied.
We require that the IV be specified for all calls for both GCM and ICM.
This is to ensure proper use of these functions.
Obtained from: p4: //depot/projects/opencrypto
Relnotes: yes
Sponsored by: FreeBSD Foundation
Sponsored by: NetGate
drives or flash keys. It can be enabled by uncommenting a single entry
in default /etc/auto_master. It can also be easily modified to use
fuse-based filesystems instead of in-kernel ones.
There is still one deficiency - the mountpoints are permanent, they
don't disappear when user removes the media. Fixing it needs some
autofs changes.
Differential Revision: https://reviews.freebsd.org/D1210
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
service does not run in jails, it was necessary to change it to something
else when jailed, and NETWORKING was arbitrarily chosen. The divider was
later moved to FILESYSTEMS when it was introduced, but the logic to change
it to NETWORKING when jailed remained. Remove it, as it no longer serves
any purpose.
PR: 194975
MFC after: 1 week
mrouted has been available in ports for the last 8 years as net/mrouted . An
equivalent rc.d script has been present in the port.
Remove all corresponding variables from etc/defaults/rc.conf
Relnotes: yes
- FreeBSD hasn't packaged X11 with the distro since 8.x
- X.org hasn't required xorg.conf [in /etc/X11] for some time now
- X.org should work with ${LOCALBASE}/etc/X11
- This path should be included in the X.org package manifest
- bootparamd
- bootpd
- finger/fingerd
- ftp/ftpd
- hastctl/hastd
- iscsid, et al
- rbootd
- talk/talkd
- tcpd, et al
- tftp/tftpd
Add src.conf entries for the various components and do a best effort
at adding components to tools/build/mk/OptionalObsoleteFiles.inc
A variant of this code has been tested on amd64/i386 for some time by
EMC/Isilon on 10-STABLE/11-CURRENT. It builds on other architectures, but the
code will remain off until it's proven it works on virtual hardware or real
hardware on other architectures
Sponsored by: EMC / Isilon Storage Division
A variant of this code has been tested on amd64/i386 for some time by
EMC/Isilon on 10-STABLE/11-CURRENT. It builds on other architectures, but the
code will remain off until it's proven it works on virtual hardware or real
hardware on other architectures
Sponsored by: EMC / Isilon Storage Division
lib/libthr/tests
A variant of this code has been tested on amd64/i386 for some time by
EMC/Isilon on 10-STABLE/11-CURRENT. It builds on other architectures, but the
code will remain off until it's proven it works on virtual hardware or real
hardware on other architectures
Original work by: pho
Sponsored by: EMC / Isilon Storage Division
have chosen different (and more traditional) stateless/statuful
NAT64 as translation mechanism. Last non-trivial commits to both
faith(4) and faithd(8) happened more than 12 years ago, so I assume
it is time to drop RFC3142 in FreeBSD.
No objections from: net@
500 new testcases
Various TODOs have been sprinkled around the Makefiles for items that even need
to be ported (missing features), testcases have issues with building/linking, or
issues at runtime.
A variant of this code has been tested extensively on amd64 and i386
10-STABLE/11-CURRENT for several months without issue. It builds on other
architectures, but the code will remain off until I have prove it works on
virtual hardware or real hardware on other architectures
In collaboration with: pho, Casey Peel <casey.peel@isilon.com>
Sponsored by: EMC / Isilon Storage Division
pjdfstest execution is opt-in and must be done as root due to some of the
assumptions made by the test suite and lack of error checking in the non-root
case
A description of how to execute pjdfstest with kyua is provided in
share/pjdfstest/README
Phabric: D824 (an earlier prototype patch)
MFC after: 1 month
Relnotes: yes
Sponsored by: EMC / Isilon Storage Division
random script ran before filesystems were mounted, which is no
longer the case.
In random_start(), immediately delete each file that is fed into
/dev/random, and recreate the default entropy file immediately
after reading and deleting it. The logic used in random_stop()
to determine which file to write to should probably be factored
out and used here as well.
do not require additional entropy to function.
It would create a circular dependency (not immediately obvious:
geli provides 'disks' and requires 'random' as of r273872,
'random' requires 'FILESYSTEMS', 'FILESYSTEMS' requires 'root',
'root' requires 'swap', and finally 'swap' requires 'disk').
This code has had an extensive rewrite and a good series of reviews, both by the author and other parties. This means a lot of code has been simplified. Pluggable structures for high-rate entropy generators are available, and it is most definitely not the case that /dev/random can be driven by only a hardware souce any more. This has been designed out of the device. Hardware sources are stirred into the CSPRNG (Yarrow, Fortuna) like any other entropy source. Pluggable modules may be written by third parties for additional sources.
The harvesting structures and consequently the locking have been simplified. Entropy harvesting is done in a more general way (the documentation for this will follow). There is some GREAT entropy to be had in the UMA allocator, but it is disabled for now as messing with that is likely to annoy many people.
The venerable (but effective) Yarrow algorithm, which is no longer supported by its authors now has an alternative, Fortuna. For now, Yarrow is retained as the default algorithm, but this may be changed using a kernel option. It is intended to make Fortuna the default algorithm for 11.0. Interested parties are encouraged to read ISBN 978-0-470-47424-2 "Cryptography Engineering" By Ferguson, Schneier and Kohno for Fortuna's gory details. Heck, read it anyway.
Many thanks to Arthur Mesh who did early grunt work, and who got caught in the crossfire rather more than he deserved to.
My thanks also to folks who helped me thresh this out on whiteboards and in the odd "Hallway track", or otherwise.
My Nomex pants are on. Let the feedback commence!
Reviewed by: trasz,des(partial),imp(partial?),rwatson(partial?)
Approved by: so(des)
Directories for /usr/lib{,32}/{i18n,private} were missing from the mtree
file, which caused installworld to install the files that should be in
the directory as the name of the directory.
interpreted the listed items as port numbers of TCP services.
A service with no suffix still works and recognized as a TCP service for
backward compatibility. It should be updated with /tcp suffix.
PR: 194292
MFC after: 1 week
for i386/amd64. Rather, it only works on i386/amd64 and should only be
built there. Rather than change the default based on which
architecutre, do things more directly by only building it on
i386/amd64 and having it always on. This is how we handle other
options that are relevant only for a few architectures.
Summary:
Add a polling loop (1Hz) to monitor the battery and AC status, to notify devd
like ACPI does for power monitoring. This allows /etc/rc.d/power_profile to
work on PowerPC laptops
Test Plan:
Tested on a Titanium PowerBook, configuring economy_cpu_freq and
performance_cpu_freq, disabling powerd.
Reviewers: #powerpc, nwhitehorn
Reviewed By: nwhitehorn
Subscribers: rpaulo
Differential Revision: https://reviews.freebsd.org/D937
This will prevent vim users from accidentally checking in buggy mtree files
(mixed tabs/spaces).
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
It defines a variable and its default value in load_rc_config() just after
rc.conf is loaded. "rcvar" command shows the current and the default values.
This is an attempt to solve a problem that rc.d scripts from third-party
software do not have entries in /etc/defaults/rc.conf. The fact that
load_rc_config() reads rc.conf only once and /etc/rc invokes the function
before running rc.d scripts made developers confused for a long time because
load_rc_config() just before run_rc_command() in each rc.d script overrides
variables only when the script is directly invoked, not from /etc/rc.
Variables defined in set_rcvar are always set in load_rc_config() after
loading rc.conf. An rc.d script can now be written in a self-contained
manner regarding the related variables as follows:
---
name=foo
rcvar=foo_enable
set_rcvar foo_enable YES "Enable $name"
set_rcvar foo_flags "-s" "Flags to $name"
...
load_rc_config $name
run_rc_command "$@"
---
collision for "no" as a country code with "NO" meaning "do not load any
keymap" (which also has been the default value in etc/defaults/rc.conf
for a long time).
The result of this collision is, that "kbdcontrol -l no" will load the
Norwegian keymap, while "keymap=no" in rc.conf was interpreted as the
lower case spelling of "NO" meaning "no keyboard" (and "no.kbd" was not
loaded).
Fix this by matching only the upper-case spelling "NO" in rc.d/syscons
when deciding whether to load a keymap file.
This will lead to "no.kbd" being loaded, if the until now valid (but
non-default) spelling "no" was used in an individual rc.conf file to mean
"no keyboard". But all alternatives I could think of introduce a larger
violation of POLA ...
Reported by: Gyrd Thane Lange (gyrd-se at thanelange.no)
MFC after: 3 days
Makefiles should not assume that source files can be overwritten. This is the
common case for Perforce source trees.
This is a followup commit to r211243 in the same vein.
MFC after: 1 month
Sponsored by: Spectra Logic
MFSpectraBSD: r1036319 on 2014/01/29, r1046711 on 2014/03/06
This is cleaner and eliminates the unneeded startup of KVP daemon on
systems that do not run as a Hyper-V guest.
Submitted by: hrs
X-MFC-with: 271493, 271688, 271699
run when asked for by the user. Right now, hv_kvpd is run on every boot.
Don't do that.
Add hv_kvpd_enable= for this script to be run.
MFC with 271493
MFC after: 2 weeks
Relnotes: yes
The following warnings were displayed:
sysctl: net.inet.ip.sourceroute=0: Operation not permitted
sysctl: net.inet.ip.accept_sourceroute=0: Operation not permitted
many thanks for their continued support of FreeBSD.
While I'm there, also implement a new build knob, WITHOUT_HYPERV to
disable building and installing of the HyperV utilities when necessary.
The HyperV utilities are only built for i386 and amd64 targets.
This is a stable/10 candidate for inclusion with 10.1-RELEASE.
Submitted by: Wei Hu <weh microsoft com>
MFC after: 1 week
addresses generated by an address range specification. The default
value is 2048. This can be increased by setting $netif_ipexpand_max
in rc.conf.
- Fix warning messages when an address range spec exceeds the upper limit.
PR: 186841
Mounting something in /tmp such as a build jail with nullfs mounts for
some directories can result in very surprising results the next day.
MFC after: 2 weeks
Relnotes: yes
tree support includes a device tree source compiler dtc(8) which
converts .dts files into .dtb files. /boot/loader will load dtb files
from this directory by default, allowing for fewer differences between
images for different SoCs. Compiled dts files will wind up here
eventually as an alternative to embedding them into the kernel.
Document this in hier(7), as well as add missing entries for
/boot/firmware and /boot/zfs, though the latter two should only be
considered place holders if someone wants to make them better.
- Identify the console driver used and print syscons or vt as appropriate.
- If vt is used and a keymap could not be loaded, then try to replace the
keymap name configured in rc.conf based on a replacement list in this
script. Warn about the fact, that a syscons keyname is configured and
report the replacement used under vt.
- If no replacement keymap is found, no keymap is loaded and a warning
is displayed, which points at the conversion script and allows the
conversion of keymaps not part of the official distribution.
This patch has been sent to the -hackers list for review, but no comment
has been received, yet. It is tested to work under syscons and vt on my
system (on vt with either the syscons or vt keymap file name in rc.conf).
MFC after: 3 days
- Rename $kerberos5_server_enable with $kdc_enable and rename
rc.d/kerberos with rc.d/kdc.
- Rename $kadmin5_server_enable with $kadmind_enable.
- Rename ${kerberos5,kpasswdd}_server with ${kdc,kpasswdd}_program.
- Fix rc.d/{kadmind,kerberos,kpasswdd,kfd} scripts not to change variables
after load_rc_config().
- Add rc.d/ipropd_master and rc.d/ipropd_slave scripts. These are
for iprop-master(8) and iprop-slave(8). Keytab used for iprop service is
defined in ipropd_{master,slave}_keytab (/etc/krb5.keytab by default).
- Add dependency on rc.d/kdc to SERVERS. rc.d/kdc must be invoked as early
as possible before scripts divided by rc.d/SERVERS.
Note that changes to rc.d/{kdc,kpasswdd,kadmind} are backward-compatible
with the old configuration variables:
${kerberos5,kpasswdd,kadmin5}_server{,_enable,_flags}.
appropriate (i.e. where syscons was already mentioned and vt supports the
feature). Comments in defaults/rc.conf are updated to match the contents
of the modified man-page rc.conf(5).
Reviewed by: pluknet, emaste
MFC after: 3 days
particularly useful for services such as "network" (netif) where each
interface can now have its own separate configuration file.
Add /etc/rc.conf.d to the mtree file so it is always present.
MFC after: 3 days
UNIX systems, eg. MacOS X and Solaris. It uses Sun-compatible map format,
has proper kernel support, and LDAP integration.
There are still a few outstanding problems; they will be fixed shortly.
Reviewed by: allanjude@, emaste@, kib@, wblock@ (earlier versions)
Phabric: D523
MFC after: 2 weeks
Relnotes: yes
Sponsored by: The FreeBSD Foundation
This change consists of two merges from projects/zfsd/head along with the
addition of an ATF test case for the new functionality.
sbin/devd/tests/Makefile
sbin/devd/tests/client_test.c
Add ATF test cases for reading events from both devd socket types.
r266519:
sbin/devd/devd.8
sbin/devd/devd.cc
Create a new socket, of type SOCK_SEQPACKET, for communicating with
clients. SOCK_SEQPACKET sockets preserve record boundaries,
simplying code in the client. The old SOCK_STREAM socket is retained
for backwards-compatibility with existing clients.
r269993:
sbin/devd/devd.8
Fix grammar bug.
CR: https://reviews.freebsd.org/rS266519
MFC after: 5 days
Sponsored by: Spectra Logic
Rename all of the TAP test applications from <test> to <test>_test
to match the convention described in the TestSuite wiki page
Phabric: D538
Approved by: jmmv (mentor)
Sponsored by: EMC / Isilon Storage Division
to the ldconfig32 default path. /usr/lib32 is the 32 bit versions of
*current* libraries, while old versions should be able to be in
/usr/lib32/compat, like with /usr/lib/compat. The separation is meant to
keep the compile time default search paths cleaner.
This includes:
o All directories named *ia64*
o All files named *ia64*
o All ia64-specific code guarded by __ia64__
o All ia64-specific makefile logic
o Mention of ia64 in comments and documentation
This excludes:
o Everything under contrib/
o Everything under crypto/
o sys/xen/interface
o sys/sys/elf_common.h
Discussed at: BSDcan
Test LD_LIBRARY_PATH_FDS by linking a binary that requires a shared
library that isn't in any of the usual search paths. Ensure this fails
when we don't supply LD_LIBRARY_PATH_FDS or we pass invalid information
in it. Ensure it works when we pass the correct directory in various
places in the variable.
Approved by: rwatson (mentor)
MFC after: 3 weeks
Sponsored by: DARPA/AFRL
Force all the contents of /usr/tests to go into a separate distribution
file so that users of binary releases can easily choose to not install it.
To make this possible, we need two fixes:
- bsd.subdir.mk needs to properly honor NO_SUBDIR in all cases so that we
do not recurse into 'tests' subdirectories when we needn't. Otherwise,
we end up with some Kyuafiles in base.txz.
- etc/Makefile needs to skip installing tests in its 'distribute' target
so that a Kyuafile doesn't leak into base.txz.
Approved by: gjb
The change to expand_number (r204654) broke detection of too large sizes and
relative sizes ('+'/'-').
Also add some tests.
PR: 190735
Submitted by: Kirk Russell
MFC after: 1 week
In r266650, we made libatf-c and libatf-c++ private libraries so that no
components outside of the source tree could unintendedly depend on them.
This change does the same for the "atf-sh library" by moving the atf-sh
interpreter from its public location in /usr/bin/ to the private location
in /usr/libexec/. Our build system will ensure that our own test programs
use the right binary, but users won't be able to depend on atf-sh by
"mistake".
Committing this now to ride the UPDATING notice added with r267172 today.
the system.
Together with lm75(4) this module allows easy temperature monitoring over
SNMP, specially for embedded systems.
Manual page reviewed by: brueffer (D128)
prevents surprising effects post-installation on serial-only x86 systems
(e.g. bhyve) where the kernel messages will appear, rc scripts will run,
and then there will be no login prompt and you will be locked out of the
system.
Thanks to Devin Teske and Peter Grehan for ideas and testing. With this
patch, it may also be possible to unify all or most of the machine-specific
ttys files.
We should not be leaking these interfaces to the outside world given
that it's much easier for third-party components to use the devel/atf
package from ports.
As a side-effect, we can also drop the ATF pkgconfig and aclocal files
from the base system. Nothing in the base system needs these, and it
was quite ugly to have to get them installed only so that a few ports
could build. The offending ports have been fixed to depend on
devel/atf explicitly.
Reviewed by: bapt
Convert libdevctl to use devd's new SEQPACKET socket.
lib/libdevctl/consumer.cc
lib/libdevctl/event_buffer.cc
lib/libdevctl/event_buffer.h
lib/libdevctl/reader.cc
lib/libdevctl/reader.h
Read from the new /var/run/devd.seqpacket.pipe instead of
/var/run/devd.pipe. Since it preserves record boundaries,
we can eliminate all the repacketization code in
EventBuffer::ExtractEvent as well as much supporting code
from the Reader class.
lib/libdevctl/consumer.cc
Make the pipe nonblocking. Previously, we avoided blocking
by using the FIONREAD ioctl, but this is simpler.
cddl/sbin/zfsd/case_file.cc
cddl/sbin/zfsd/tests/zfsd_unittest.cc
cddl/sbin/zfsd/vdev.cc
cddl/sbin/zfsd/zfsd.cc
cddl/sbin/zfsd/zfsd.h
cddl/sbin/zfsd/zfsd_event.cc
Update zfsd according to the libdevctl changes. The only
nontrivial change is to CaseFile::DeSerialize, which
elimintes the use of IStreamReader.
cddl/sbin/zfsd/case_file.cc
For an unknown reason, sometimes the std::ios::failbit
will get set on caseStream. Instead of checking for
!eof(), check for good(). That method checks the
eofbit, errorbit, and failbit.
livdevctl cleanup (from gibbs)
lib/libdevctl/event.cc:
lib/libdevctl/event.h:
Remove the event class's name from its Builder method. It's
perfectly clear that DevfsEvent::Builder() is the DevfsEvent
class's Builder function.
cddl/sbin/zfsd/zfsd.cc:
cddl/sbin/zfsd/zfsd_event.cc:
cddl/sbin/zfsd/zfsd_event.h:
Conform to new libdevct Builder naming convention.
Fix autoreplace by physical path when a hotspare is present
cddl/sbin/zfsd/case_file.cc
Fix logic error in CaseFile::Replace regarding whether the
replacement device is a spare or not.
Reviewed by: gibbs
Sponsored by: Spectra Logic
The CUSE library is a wrapper for the devfs kernel functionality which
is exposed through /dev/cuse . In order to function the CUSE kernel
code must either be enabled in the kernel configuration file or loaded
separately as a module. Currently none of the committed items are
connected to the default builds, except for installing the needed
header files. The CUSE code will be connected to the default world and
kernel builds in a follow-up commit.
The CUSE module was written by Hans Petter Selasky, somewhat inspired
by similar functionality found in FUSE. The CUSE library can be used
for many purposes. Currently CUSE is used when running Linux kernel
drivers in user-space, which need to create a character device node to
communicate with its applications. CUSE has full support for almost
all devfs functionality found in the kernel:
- kevents
- read
- write
- ioctl
- poll
- open
- close
- mmap
- private per file handle data
Requested by several people. Also see "multimedia/cuse4bsd-kmod" in
ports.
$alias used to hold alias number, but now it carries full variable name,
so messages were tuned to account for that.
Other fixes:
- eliminate unneeded double spaces;
- tell user where inet/inet6 keywords are expected to be.
Reviewed by: hrs
MFC after: 1 week
default for newsyslog(8).
The /usr/local/etc/newsyslog.conf.d will give packages an opportunity to
install a default configuration to handle their own log files.
MFC after: 2 weeks
Relnotes: yes
This first step is mostly to prevent the code from rotting even further
and to ensure these do not get wiped when fmake's code is removed from
the tree.
These tests are currently being skipped because they detect the underlying
make is not fmake and thus disable themselves -- and the reason is that
some of the tests fail, possibly due to legitimate bugs. Enabling them to
run against bmake will come separately.
Lastly, it would be ideal if these tests were fed upstream but they are
not ready for that yet. In the interim, just put them under usr.bin/bmake/
while we sort things out. The existence of a different unit-tests directory
within here makes me feel less guilty about this.
Change confirmed working with a clean amd64 build.
of C1.
This may not stay through 11.0-RELEASE, but at least having it
on by default in -HEAD will expose (more) issues with broken hardware.
Note: I have no plans or desire to MFC this to stable/10.
melifaro, we agreed that ifconfig's behavior was not a bug. The main
motivation for bin/187551 was to partially resolve kern/187549, but we
resolved kern/187549 in a different way instead.
ObsoleteFiles.inc
etc/mtree/BSD.tests.dist
sbin/ifconfig/tests/fibs_test.sh
sbin/ifconfig/tests/Makefile
sbin/ifconfig/Makefile
Remove /usr/tests/sbin/ifconfig
PR: bin/187551
MFC after: 3 days
Sponsored by: Spectra Logic
This change adds tests/ directories in the source tree to create various
subdirectories in /usr/tests/ and to install placeholder Kyuafiles for
them.
the relevant hierarchies are: cddl, etc, games, gnu and secure.
The reason for this is to simplify the addition of new test programs for
utilities or libraries under any of these directories. Doing so on a
case by case basis is unnecessary and is quite an obscure process.
stop timer. since watchdogd rc.d script is marked as 'shutdown'
it will exit (on shutdown) and stop timer. if system happens to
hung after watchdogd exited, manual reset is required. when one
operates in "lights-out" type of environments and without
readily available "remote hands" it could create a problem.
this provides ability to override "stop signal" for watchdogd.
default behavior is preserved, i.e. watchdogd will still be killed
via SIGTERM and timer will be stopped. in order to activate new
feature, one needs to put
watchdogd_sig_stop="KILL"
into /etc/rc.conf and also make sure watchdogd timeout is set
to long enough value allowing system to come back online before
timeout fires.
Obtained from: Netflix
MFC after: 1 week
This file is used by pkg(8) from ports as well. Someone may
choose to not install pkg(7) but still want to consume
official packages by building or installing pkg(8) manually.
Discussed with: bapt
MFC after: 1 day (Working on EN)
the first alias had to be _alias0 and processing stopped at the first non-
defined variable (preventing gaps). Allowing gaps gives the administrator
the ability to group aliases in an adhoc manner and also lifts the
requirement to renumber aliases simply to comment-out an existing one.
Aliases are processed in numerical ascending order.
Discussed on: -rc
MFC after: 1 week
These were originally deleted as "not important" but, actually we need them
in place if we want to be able to use autoconf on software that provides
atf-based tests. (That includes being able to rebuild autotest from scratch
on the Kyua cluster machines, as the automated setup does.)
Interestingly, the pkill tool lives in bin, not usr.bin. Haven't bothered
to check if this is because the tool moved or because the tests were
originally added in the wrong place.
Note that these tests are for fmake, not bmake, and thus they are not
installed nor run when bmake is selected (the default). Yes, I have
wasted a *ton* of time on moving tests for no real reason other than
ensuring they are not left behind.
But maybe, just maybe, it was not work in vain: the majority of these
tests also work with bmake and the few that don't may point at broken
stuff. For example, the tests for the "archive" feature do not work
with bmake, but bmake's manpage and source tree seem to imply that they
should. So... to be investigated later; need to poke sjg@.
