addresses corresponding to system RAM. On amd64 ram0 uses the SMAP
and claims all the type 1 SMAP regions. On i386 ram0 uses the
dump_avail[] array. Note that on i386 we have to ignore regions above
4G in PAE kernels since bus resources use longs.
udp_sendspace, to avoid a situation where jumbograms (datagrams > 9KB)
are unnecessarily fragmented.
A common use case for this is OSPF link-state database synchronization
during adjacency bringup on a high speed network with a large MTU.
It is not possible to auto-tune this setting until a socket is bound to
a given interface, and because the laddr part of the inpcb tuple may be
overridden, it makes no sense to do so. Applications may request a larger
socket buffer size by using the SO_SENDBUF and SO_RECVBUF socket options.
Certain applications such as Quagga ospfd do not probe for interface MTU
and therefore do not increase SO_SENDBUF in this use case.
XORP is not affected by this problem as it preemptively uses SO_SENDBUF
and SO_RECVBUF to account for any possible additional latency in XRL IPC.
PR: kern/108375
Requested by: Vladimir Ivanov
MFC after: 1 week
on amd64 and i386) until we gain proper BUS_DMA_NOCACHE support.
(in progress).
Tested by: rafan, infofarmer, Nguyen Tam Chinh <unixvn@gmail.com>
Tested on: amd64, i386
shutdown which caused extra abort from peer.
- RTT time calculation was not being done in
express sack handling since it refered to an unused
variable (rto_pending). Removed variable.
- socket buffer high water access macro-ized.
- don't acquire port lock, already held in ioctl
- rename to cxgb_stop_locked
- switch callout_drain to callout_stop to avoid a hang from having the port lock held
cause the EC to stop handling future events because the GPE stayed masked.
Set a flag when queueing a GPE handler since it will ultimately re-enable
the GPE. In all other cases, re-enable it ourselves. I reworked the
patch from the submitter.
Submitted by: Rong-en Fan <grafan@gmail.com>
structures. Detect when ifnet instances are detached from the network
stack and perform appropriate cleanup to prevent memory leaks.
This has been implemented in such a way as to be backwards ABI compatible.
Kernel consumers are changed to use if_delmulti_ifma(); in_delmulti()
is unable to detect interface removal by design, as it performs searches
on structures which are removed with the interface.
With this architectural change, the panics FreeBSD users have experienced
with carp and pfsync should be resolved.
Obtained from: p4 branch bms_netdev
Reviewed by: andre
Sponsored by: Garance A Drosehn
Idea from: NetBSD
MFC after: 1 month
is okay for most of the chipsets but BCM5701 PHY does not seem to like it.
Set media to IFM_NONE if link is not up instead of the previous value.
Reported by: Goran Lowkrantz (goran dot lowkrantz at ismobile dot com)
already been deleted. The assertion is important to show that
we won't end up accounting for extended attribute blocks (using
fs_pendingblocks) in our subsequent call to fs_alloc().
Agreed verbally by: mckusick
MFC after: 3 weeks
Main points of this change:
* Drop frames immediately if the interface is not marked IFF_UP.
* Always trim off the frame checksum if present.
* Always use M_VLANTAG in preference to passing 802.1Q frames
to consumers.
* Use __func__ consistently for KASSERT().
* Use the M_PROMISC flag to detect situations where ether_input()
may reenter itself on the same call graph with the same mbuf which
was promiscuously received on behalf of subsystems such as
netgraph, carp, and vlan.
* 802.1P frames (that is, VLAN frames with an ID of 0) will now be
passed to layer 3 input paths.
* Deal with the special case for CARP in a sane way.
This is a significant rewrite of code on the critical path. Please report
any issues to me if they arise. Frames will now only pass through dummynet
if M_PROMISC is cleared, to avoid problems with re-entry.
The handling of CARP needs to be revisited architecturally. The M_PROMISC
flag may potentially be demoted to a link-layer flag only as it is in
NetBSD, where the idea originated.
Discussed on: net
Idea from: NetBSD
Reviewed by: yar
MFC after: 1 month
This change partially resolves the issue in the PR. Further architectural
fixes, in the form of reference counting, are needed.
PR: 86848
Reviewed by: yar
MFC after: 1 month
on a per VRF basis (BSD has only one VRF currently).
Hash table is sized to 16 but may need to be adjusted
for machines with large numbers of addresses.
Reviewed by: gnn
- SB_CLEAR macro defined and used for sb clearing.
- Fix for CMT express_sack_handling did not do proper
pseudo-cumack updates.
- Get rid of extraneous function that was never used ip_2_ip6_hdr()
- Fixed source address selection bug (initialization problem).
- Source address selection debug added.
in case of multiple interfaces with the same MAC in the same bridge.
This commit do not solve the entire problem. Only case where packet
arrived from such interface.
PR: kern/109815
MFC after: 7 days
Submitted by: Eygene Ryabinkin and rik@
Discussed with: bms@, thompsa@, yar@
prison_priv_check() to decide what to do.
This change is suppose not to change current (security) behaviour
in any way.
This change is simlar to the change of PRIV_VFS_MOUNT in previous revision.
most systems, it causes the EC not to respond for some Acer and Compaq/HP
laptops. This is the default value for Linux also. For systems that need
it, burst mode can be enabled via the tunable/sysctl:
debug.acpi.ec.burst="1"
Only ops which used namei still remained.
- Implement a scheme for reducing the overhead of tracking which vops
require giant by constantly reducing the number of recursive giant
acquires to one, leaving us with only one vfslocked variable.
- Remove all NFSD lock acquisition and release from the individual nfs
ops. Careful examination has shown that they are not required. This
greatly simplifies the code.
Sponsored by: Isilon Systems, Inc.
Discussed with: rwatson
Tested by: kkenn
Approved by: re
unsigned char. Weirdly, casting the 1 constant to u_char still produces
a signed integer result that is then used in the % computation. This
avoids that mess all together and causes a 0 pri to turn into 255 % 64
as we expect.
Reported by: kkenn (about 4 times, thanks)
- *ip is not initialized in the case of inet6 connection, but ip->ip_len is
being changed anyway
Now the question is, why does it think an ipv4 connection is an ipv6 connection?
xemacs still doesn't work over X11 forwarding, but the kernel no longer panics.
- SWAPLR quirk for (unknown, luckily it is mine) broken uaudio stick.
Fixing by rewiring is impossible without damaging it. Luckily,
we can fix it using "other" methods :) .
- Add uaudio_get_vendor(), _product() and _release() in uaudio.c
(currently used by uaudio_pcm quirk).
- Implement CHANNEL_SETFRAGMENTS().
- Drop channel locking in few places where it is about to sleep
somewhere. This should help eliminating illegal locking acquisition
where the current thread is about to sleep, and also few deadlock
cases. Dropping it right here is quite safe since it is already
protected by CHN_F_BUSY flag and other threads won't bother to touch it.
Solving other illegal locking issues are quite tricky without converting
most usbd_do_request() calls to its equivalent _async() calls,
which I intend to do it later after getting full test report from
other people with different uaudio hardwares.
- Fix memory leak issues during detach. This seems common to any drivers
(notably emu10kx, csapcm?) with bridge functions.
Implement CHANNEL_SETFRAGMENTS() for snd_atiixp, snd_es137x, snd_hda
and snd_via8233. CHANNEL_SETBLOCKSIZE() will basically call
CHANNEL_SETFRAGMENTS() internally using conservative blocksize /
blockcount hints. Other drivers will be converted later.
- Disable stray buffer management, since sample size aligned buffering
are pretty much guaranteed through out the entire feeder_* chain
processes.
- Few style(9) cleanups.
channel.c/channel_if.m:
- Macros cleanups, prefer inlined min() over MIN().
- Rework chn_read()/chn_write() for better dead interrupt detection
policy. Reduce scheduling overhead by doing pure 5 seconds sleep
before giving up, instead of several cycle of brute micro sleeping.
- Avoid calling wakeup_one() for non-sleeping channel (for example,
vchan parent channel).
- EWOULDBLOCK -> EAGAIN.
- Fix possible divide-by-zero panic on chn_sync().
- Re-enforce ^2 blocksize policy, since there are too many broken
userland apps that blindly assume it without even trying to do
serious calculations.
- New channel method - CHANNEL_SETFRAGMENTS(), a refined version of
CHANNEL_SETBLOCKSIZE(). It accept _both_ blocksize and blockcount
arguments, so the driver internals will have better hints for
buffering and timing calculations.
- Hook FEEDER_SWAPLR into feederchain building process.
feeder_fmt.c:
- Unified version of various filters, avoiding duplications.
- malloc()less feeder_fmt. Informations can be retrieved dynamically
by doing table lookup on static data. For cases such as converting
from stereo to mono or reducing bit depth where input data is larger
than output, cycle remaining available free space until it has been
exhausted and start kicking 8 bytes reservoir space from there to
complete the remaining requested count.
- Introduce FEEDER_SWAPLR. Few super broken hardwares (found on several
extremely cheap uaudio stick, possibly others) mistakenly wired left
and right channels wrongly, screwing output or input.
- Rearrange FEEDER_* constants starting from 0 to 31, so the future
additions will be much easier and consistent.
- Introduce FEEDER_SWAPLR. Few super broken hardwares (found on several
extremely cheap uaudio stick, possibly others) mistakenly wired left
and right channels wrongly, screwing output or input.
malloc()less feeder_vchan. Informations can be retrieved dynamically
by doing table lookup on static data. Reduce mixing overhead by
doing direct copy on first channel. Mixing process will begin starting
from second channel onwards.
malloc()less feeder_volume. Informations can be retrieved dynamically
by doing table lookup on static data. Increase resolution from 6bit
to PCM_FXSHIFT (8bit) for better resolution and finer volume changes.
- Convert sx lock to plain mutex. Since the access of /dev/sndstat
is pretty much exclusive and protected by toggling sndstat_isopen,
plain mutex is more than enough.
- Enable SBUF_AUTOEXTEND to avoid buffer truncation.
- We need at least two OCBs with indirect pointers allocated in a 4KB page.
- SBP_MAXPHYS can increase to 1MB once we separate management OCB/ORB
which usually does not need indirect pointers.
- We have to increase SBP_DMA_SIZE for MAXPHYS larger than 1MB.
MFC after: 3 days
cache coherency, besides of causing train wreck in other places
(especially on amd64, possibly on i386).
Discussed with: kib@, rafan@
Tested by: rafan@
confusions and panic provided that the following conditions are met:
1) WITNESS is enabled (watch/trace).
2) Using modules, instead of statically linked (Not a strict
requirement, but easier to reproduce this way).
3) 2 or more modules share the same mtx type ("sound softc").
- They might share the same name (strcmp() == 0), but it always
point to different address.
4) Repetitive kldunload/load on any module that shares the same mtx
type (Not a strict requirement, but easier to reproduce this way).
Consider module A and module B:
- From enroll() - subr_witness.c:
* Load module A. Everything seems fine right now.
wA-w_refcount == 1 ; wA-w_name = "sound softc"
* Load module B.
* w->w_name == description will always fail.
("sound softc" from A and B point to different address).
* wA->w_refcount > 0 && strcmp(description, wA->w_name) == 0
* enroll() will return wA instead of returning (possibly unique)
wB.
wA->w_refcount++ , == 2.
* Unload module A, mtx_destroy(), wA->w_name become invalid,
but wA->w_refcount-- become 1 instead of 0. wA will not be
removed from witness list.
* Some other places call mtx_init(), iterating witness list,
found wA, failed on wA->w_name == description
* wA->w_refcount > 0 && strcmp(description, wA->w_name)
* Panic on strcmp() since wA->w_name no longer point to valid
address.
Note that this could happened in other places as well, not just sound
(eg. consider lots of drivers that share simmilar MTX_NETWORK_LOCK).
Solutions (for sound case):
1) Provide unique mtx type string for each mutex creation (chosen)
or
2) Put "sound softc" global variable somewhere and use it.
and syncache_respond() into its own generic function tcp_addoptions().
tcp_addoptions() is alignment agnostic and does optimal packing in all cases.
In struct tcpopt rename to_requested_s_scale to just to_wscale.
Add a comment with quote from RFC1323: "The Window field in a SYN (i.e.,
a <SYN> or <SYN,ACK>) segment itself is never scaled."
Reviewed by: silby, mohans, julian
Sponsored by: TCP/IP Optimization Fundraise 2005
- moved away from ifn/ifa access to sctp_ifa/sctp_ifn
built and managed by the add-ip code.
- cleaned up add-ip code to use the iterator
- made iterator be a thread, which enables auto-asconf now.
- rewrote and cleaned up source address selection (also
made it use new structures).
- Fixed a couple of memory leaks.
- DACK now settable as to how many packets to delay as
well as time.
- connectx() to latest socket API, new associd arg.
- Fixed issue with revoking and loosing potential to
send when we inflate the flight size. We now inflate
the cwnd too and deflate it later when the revoked
chunk is sent or acked.
- Got rid of some temp debug code
- src addr selection moved to a common file (sctp_output.c)
- Support for simple VRF's (we have support for multi-vfr
via compile switch that is scrubbed from BSD but we won't
need multi-vrf until we first get VRF :-D)
- Rest of mib work for address information now done
- Limit number of addresses in INIT/INIT-ACK to
a #def (30).
Reviewed by: gnn
boot. Then, just switch to the kernel pmap when suspending instead of
allocating/freeing our own mapping every time. This should solve a panic
of pmap_remove() being called with interrupts disabled. Thanks to Alan
Cox for developing this patch.
Note: this means that ACPI requires super page (PG_PS) support in the CPU.
This has been present since the Pentium and first documented in the
Pentium Pro. However, it may need to be revisited later.
Submitted by: alc
MFC after: 1 month
acpi module. Also clean up print of args a little.
This was accidentally committed as 1.9.2.3 in the stable branch. Since it
is harmless, I will let the "insta-MFC" stand unless there is a problem.
the alternate status and the control registers. Remove the local
version of ata_reset.
Add support for the ADI Pronghorn Metro boards. They use CS3 and CS4
instead of Avila's CS1 and CS2.
the alternate status and the control registers. Remove the local
version of ata_reset.
Add support for the ADI Pronghorn Metro boards. They use CS3 and CS4
instead of Avila's CS1 and CS2.
OKed by: sam, cognet
Each struct dquot gets dq_lock mutex to protect dq_flags and to interlock
with DQ_LOCK. qhash, dqfreelist and dq.dq_cnt are protected by global
dqhlock mutex.
i_dquot array for inode is protected by lockmgr' vnode lock, corresponding
assert added to the dqget(). Access to struct ufsmount quota-related fields
(um_quotas and um_qflags) is protected by um_lock.
Tested by: Peter Holm
Reviewed by: tegge
Approved by: re (kensmith)
This work were not possible without enormous amount of help given by
Tor Egge and Peter Holm. Tor reviewed each version of patch, pointed out
numerous errors and provided invaluable suggestions. Peter did tireless
testing of the patch as it was developed.
from ATAPI requests. If CAM debugging is enabled, also mark ATAPI
requests with ATA_R_DEBUG flag.
(atapi_cb): Report ATAPI timeouts to the CAM layer.
Fix incorrect debugging traces in the presence of ATAPI errors.
PR: kern/103602
MFC after: 2 weeks
CAM rescan if the ATAPI device entries have not changed.
The ATAPI bus may be reset for a variety of reasons, including any time an
ATAPI request times out. It is not necessary to rescan at the CAM level
in such a case, unless a device has appeared or disappeared, or has
otherwise changed.
PR: kern/103602
MFC after: 2 weeks
ATAPI request, do not clear the ATA_R_DEBUG flag. This allows a request
marked as requiring debug traces to produce these traces also during
the completion of the autosense processing.
Reviewed by: sos
MFC after: 2 weeks
tokens into the common isp_osinfo structure instead of being
in bus specific structures. This allows us to implement
a SYNC_REG MEMORYBARRIER call (using bus_space_barrier)
and also reduce the amount of bus specific wrapper structure
usages in isp_pci && isp_sbus.
MFC after: 3 days
late stages of unmount). On failure, the vnode is recycled.
Add insmntque1(), to allow for file system specific cleanup when
recycling vnode on failure.
Change getnewvnode() to no longer call insmntque(). Previously,
embryonic vnodes were put onto the list of vnode belonging to a file
system, which is unsafe for a file system marked MPSAFE.
Change vfs_hash_insert() to no longer lock the vnode. The caller now
has that responsibility.
Change most file systems to lock the vnode and call insmntque() or
insmntque1() after a new vnode has been sufficiently setup. Handle
failed insmntque*() calls by propagating errors to callers, possibly
after some file system specific cleanup.
Approved by: re (kensmith)
Reviewed by: kib
In collaboration with: kib
sosend_copyin().
- Use M_WAITOK instead of M_TRYWAIT in sosend_copyin().
- Don't check for NULL from M_WAITOK and return ENOBUFS.
M_WAITOK/M_TRYWAIT allocations don't fail with NULL.
Reviewed by: andre
Requested by: andre (2)
This can help to spot bugs (which it did for me,)
and let people know which mode the vlan module is
actually using if they suspect it isn't picking its
options from the main kernel config file.
- ifv_list member of struct ifvlan is unneeded in array mode,
it's used only in hash mode to resolve hash collisions.
- We don't need the list of trunks at all. (The initial reason for
having it was to be able to destroy all trunks in the MOD_UNLOAD
handler, but a trunk is not to be destroyed forcibly -- it will
go away when all vlan interfaces on it have been deleted.
Note that if_clone_detach() called first of all under MOD_UNLOAD
will delete all vlan interfaces and thus make all trunks go away
quietly.)
- It's enough to use a single [S]LIST_FIRST() in a typical list
destruction loop.
function which is called from pfs_destroy() before the node is reclaimed.
Modify pfs_create_{dir,file,link}() to accept a pointer to a destructor
function in addition to the usual attr / fill / vis pointers.
This breaks both the programming and binary interfaces between pseudofs
and its consumers. It is believed that there are no pseudofs consumers
outside the source tree, so that the impact of this change is minimal.
Submitted by: Aniruddha Bohra <bohra@cs.rutgers.edu>
their latest Compaq V3000 BIOS (revision F.22). As a result, analog CD
connectivity is gone to the oblivion. Even if they decide to fix it in
future revisions, the damage has been done.
o leave IEEE80211_RADIOTAP_HDRLEN for portability to other systems but
correct comment about radiotap headers being padded to 64-bytes
(hasn't been true for many years)
o remove reference to IEEE80211_RADIOTAP_FCS; it was never used, instead
the flags are marked with IEEE80211_RADIOTAP_F_FCS to indicate whether
or not FCS is present
Might be better to just remove IEEE80211_RADIOTAP_HDRLEN so drivers
don't bogusly pad.
MFC after: 2 weeks
