Commit Graph

12 Commits

Author SHA1 Message Date
Warner Losh
d6b6639713 Add ISA PNP tables to ISA drivers. Fix a few incidental comments.
ACPI ISA PBP tables not tagged, there's bigger issues with them.
2018-01-29 00:22:30 +00:00
Pedro F. Giffuni
71e3c3083b sys/powerpc: further adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
2017-11-27 15:09:59 +00:00
Nathan Whitehorn
544234026d Allow PIC drivers to translate firmware sense codes for themselves. This
is designed to replace the tables in dev/fdt/fdt_ARCH.c, but will not
happen quite yet.
2013-10-24 15:37:32 +00:00
Marcel Moolenaar
f1a8a35846 Fix r222813: we need to include sys/cpuset.h. because the PIC interface
uses cpuset_t. While here, fix the redundant inclusion of sys/bus.h and
order the includes.

Approved by:	re (blanket)
2011-07-31 18:30:38 +00:00
Marcel Moolenaar
6d2d7b8c0d Fix the interrupt code, broken 7 months ago. The interrupt framework
already supported nested PICs, but was limited to having a nested
AT-PIC only. With G5 support the need for nested OpenPIC controllers
needed to be added. This was done the wrong way and broke the MPC8555
eval system in the process.

OFW, as well as FDT, describe the interrupt routing in terms of a
controller and an interrupt pin on it. This needs to be mapped to a
flat and global resource: the IRQ. The IRQ is the same as the PCI
intline and as such needs to be representable in 8 bits. Secondly,
ISA support pretty much dictates that IRQ 0-15 should be reserved
for ISA interrupts, because of the internal workins of south bridges.
Both were broken.

This change reverts revision 209298 for a big part and re-implements
it simpler. In particular:
o   The id() method of the PIC I/F is removed again. It's not needed.
o   The openpic_attach() function has been changed to take the OFW
    or FDT phandle of the controller as a second argument. All bus
    attachments that previously used openpic_attach() as the attach
    method of the device I/F now implement as bus-specific method
    and pass the phandle_t to the renamed openpic_attach().
o   Change powerpc_register_pic() to take a few more arguments. In
    particular:
    -   Pass the number of IPIs specificly. The number of IRQs carved
	out for a PIC is the sum of the number of int. pins and IPIs.
    -   Pass a flag indicating whether the PIC is an AT-PIC or not.
	This tells the interrupt framework whether to assign IRQ 0-15
	or some other range.
o   Until we implement proper multi-pass bus enumeration, we have to
    handle the case where we need to map from PIC+pin to IRQ *before*
    the PIC gets registered. This is done in a similar way as before,
    but rather than carving out 256 IRQs per PIC, we carve out 128
    IRQs (124 pins + 4 IPIs). This is supposed to handle the G5 case,
    but should really be fixed properly using multiple passes.
o   Have the interrupt framework set root_pic in most cases and not
    put that burden in PIC drivers (for the most part).
o   Remove powerpc_ign_lookup() and replace it with powerpc_get_irq().
    Remove IGN_SHIFT, INTR_INTLINE and INTR_IGN.

Related to the above, fix the Freescale PCI controller driver, broken
by the FDT code. Besides not attaching properly, bus numbers were
assigned improperly and enumeration was broken in general. This
prevented the AT PIC from being discovered and interrupt routing to
work properly. Consequently, the ata(4) controller stopped functioning.

Fix the driver, and FDT PCI support, enough to get the MPC8555CDS
going again. The FDT PCI code needs a whole lot more work.

No breakages are expected, but lackiong G5 hardware, it's possible
that there are unpleasant side-effects. At least MPC85xx support is
back to where it was 7 months ago -- it's amazing how badly support
can be broken in just 7 months...

Sponsored by: Juniper Networks
2011-01-29 20:58:38 +00:00
Rafal Jaworowski
d1d3233ebd Convert Freescale PowerPC platforms to FDT convention.
The following systems are affected:

  - MPC8555CDS
  - MPC8572DS

This overhaul covers the following major changes:

  - All integrated peripherals drivers for Freescale MPC85XX SoC, which are
    currently in the FreeBSD source tree are reworked and adjusted so they
    derive config data out of the device tree blob (instead of hard coded /
    tabelarized values).

  - This includes: LBC, PCI / PCI-Express, I2C, DS1553, OpenPIC, TSEC, SEC,
    QUICC, UART, CFI.

  - Thanks to the common FDT infrastrucutre (fdtbus, simplebus) we retire
    ocpbus(4) driver, which was based on hard-coded config data.

Note that world for these platforms has to be built WITH_FDT.

Reviewed by:	imp
Sponsored by:	The FreeBSD Foundation
2010-07-11 21:08:29 +00:00
Nathan Whitehorn
0870f0be13 Move the EOI logic when starting ithreads into intr_machdep instead of
relying on it as a side effect of PIC_MASK() in the PIC drivers, and add
an inmplementation of assign_cpu() for the kernel interrupt layer.
2010-07-06 15:27:05 +00:00
Marcel Moolenaar
8a35d194f2 Remove the unneeded header <machine/intr.h>. 2010-07-02 02:17:39 +00:00
Marcel Moolenaar
ec120b9476 Pass the device_t of the AT PIC driver to atpic_intr() so that
we don't have to use a global variable. Pass a NULL frame pointer
to the dispatch function just like openpic(4).
2010-06-24 05:05:18 +00:00
Nathan Whitehorn
eaef5f0af8 Provide for multiple, cascaded PICs on PowerPC systems, and extend the
OFW interrupt map interface to also return the device's interrupt parent.

MFC after:	8.1-RELEASE
2010-06-18 14:06:27 +00:00
Marcel Moolenaar
591dea8c59 Mark the cascaded AT interrupt handler as MP safe to avoid having
it grab Giant. The next step would be to make it a filter.
2009-05-31 01:56:06 +00:00
Marcel Moolenaar
ac741ae511 Add suppport for ISA and ISA interrupts to make the ATA
controller in the VIA southbridge functional in the CDS
(Configurable Development System) for MPC85XX.
The embedded USB controllers look operational but the
interrupt steering is still wrong.
2009-04-24 03:51:11 +00:00