This commit does not add error returns to minidumpsys() or
textdump_dumpsys(); those can also be added later.
Submitted by: Conrad Meyer (EMC / Isilon storage division)
HSD131 erratum in [1]) at a considerable rate. So filter these (default),
unless logging is enabled. Unfortunately, there really is no better way to
reasonably implement suppressing these errors than to just skipping them
in mca_log(). Given that they are reported for bank 0, they'd need to be
masked in MSR_MC0_CTL. However, P6 family processors require that register
to be set to either all 0s or all 1s, disabling way more than the one error
in question when using all 0s there. Alternatively, it could be masked for
the corresponding CMCI, but that still wouldn't keep the periodic scanner
from detecting these spurious errors. Apart from that, register contents of
MSR_MC0_CTL{,2} don't seem to be publicly documented, neither in the Intel
Architectures Developer's Manual nor in the Haswell datasheets.
Note that while HSD131 actually is only about C0-stepping as of revision
014 of the Intel desktop 4th generation processor family specification
update, these corrected errors also have been observed with D0-stepping
aka "Haswell Refresh".
1: http://www.intel.de/content/dam/www/public/us/en/documents/specification-updates/4th-gen-core-family-desktop-specification-update.pdf
Reviewed by: jhb
MFC after: 3 days
Sponsored by: Bally Wulff Games & Entertainment GmbH
This includes:
o All directories named *ia64*
o All files named *ia64*
o All ia64-specific code guarded by __ia64__
o All ia64-specific makefile logic
o Mention of ia64 in comments and documentation
This excludes:
o Everything under contrib/
o Everything under crypto/
o sys/xen/interface
o sys/sys/elf_common.h
Discussed at: BSDcan
These changes prevent sysctl(8) from returning proper output,
such as:
1) no output from sysctl(8)
2) erroneously returning ENOMEM with tools like truss(1)
or uname(1)
truss: can not get etype: Cannot allocate memory
there is an environment variable which shall initialize the SYSCTL
during early boot. This works for all SYSCTL types both statically and
dynamically created ones, except for the SYSCTL NODE type and SYSCTLs
which belong to VNETs. A new flag, CTLFLAG_NOFETCH, has been added to
be used in the case a tunable sysctl has a custom initialisation
function allowing the sysctl to still be marked as a tunable. The
kernel SYSCTL API is mostly the same, with a few exceptions for some
special operations like iterating childrens of a static/extern SYSCTL
node. This operation should probably be made into a factored out
common macro, hence some device drivers use this. The reason for
changing the SYSCTL API was the need for a SYSCTL parent OID pointer
and not only the SYSCTL parent OID list pointer in order to quickly
generate the sysctl path. The motivation behind this patch is to avoid
parameter loading cludges inside the OFED driver subsystem. Instead of
adding special code to the OFED driver subsystem to post-load tunables
into dynamically created sysctls, we generalize this in the kernel.
Other changes:
- Corrected a possibly incorrect sysctl name from "hw.cbb.intr_mask"
to "hw.pcic.intr_mask".
- Removed redundant TUNABLE statements throughout the kernel.
- Some minor code rewrites in connection to removing not needed
TUNABLE statements.
- Added a missing SYSCTL_DECL().
- Wrapped two very long lines.
- Avoid malloc()/free() inside sysctl string handling, in case it is
called to initialize a sysctl from a tunable, hence malloc()/free() is
not ready when sysctls from the sysctl dataset are registered.
- Bumped FreeBSD version to indicate SYSCTL API change.
MFC after: 2 weeks
Sponsored by: Mellanox Technologies
Fix the gate in xen_pv_lapic_ipi_vectored to prevent access to element
at position nitems(xen_ipis).
Sponsored by: Citrix Systems R&D
Coverity ID: 1223203
Approved by: gibbs
The functions' definitions are protected by #ifdef SMP.
Keeping apic_ops.ipi_*() methods NULL would allow to catch the use
on UP machines.
Reviewed by: royger
Sponsored by: The FreeBSD Foundation
This is needed because syscons depends on ISA.
Sponsored by: Citrix Systems R&D
Approved by: gibbs
x86/isa/isa.c:
- Allow the ISA bus to attach to xenpv.
Create the necessary hooks in order to provide a Xen PV APIC
implementation that can be used on PVH. Most of the lapic ops
shouldn't be called on Xen, since we trap those operations at a higher
layer.
Sponsored by: Citrix Systems R&D
Approved by: gibbs
x86/xen/hvm.c:
x86/xen/xen_apic.c:
- Move IPI related code to xen_apic.c
x86/xen/xen_apic.c:
- Introduce Xen PV APIC implementation, most of the functions of the
lapic interface should never be called when running as PV(H) guest,
so make sure FreeBSD panics when trying to use one of those.
- Define the Xen APIC implementation in xen_apic_ops.
xen/xen_pv.h:
- Extern declaration of the xen_apic struct.
x86/xen/pv.c:
- Use xen_apic_ops as apic_ops when running as PVH guest.
conf/files.amd64:
conf/files.i386:
- Include the xen_apic.c file in the build of i386/amd64 kernels
using XENHVM.
This is needed for Xen PV(H) guests, since there's no hardware lapic
available on this kind of domains. This commit should not change
functionality.
Sponsored by: Citrix Systems R&D
Reviewed by: jhb
Approved by: gibbs
amd64/include/cpu.h:
amd64/amd64/mp_machdep.c:
i386/include/cpu.h:
i386/i386/mp_machdep.c:
- Remove lapic_ipi_vectored hook from cpu_ops, since it's now
implemented in the lapic hooks.
amd64/amd64/mp_machdep.c:
i386/i386/mp_machdep.c:
- Use lapic_ipi_vectored directly, since it's now an inline function
that will call the appropiate hook.
x86/x86/local_apic.c:
- Prefix bare metal public lapic functions with native_ and mark them
as static.
- Define default implementation of apic_ops.
x86/include/apicvar.h:
- Declare the apic_ops structure and create inline functions to
access the hooks, so the change is transparent to existing users of
the lapic_ functions.
x86/xen/hvm.c:
- Switch to use the new apic_ops.
BUS_DMA_KMEM_ALLOC. They serve the same purpose, but using the flag
means that the map can be NULL again, which in turn enables significant
optimizations for the common case of no bouncing.
Obtained from: Netflix, Inc.
MFC after: 3 days
boundary. This was addressed several years ago by creating a parent
tag hierarchy for the root buses that set the boundary restriction
for appropriate buses and allowed child deviced to inherit it.
Somewhere along the way, this restriction was turned into a case for
marking the tag as a candidate for needing bounce buffers, instead
of just splitting the segment along the boundary line. This flag
also causes all maps associated with this tag to be non-NULL, which
in turn causes bus_dmamap_sync() to take the slow path of function
pointer indirection to discover that there's no bouncing work to
do. The end result is a lot of pages set aside in bounce pools
that will never be used, and a slow path for data buffers in nearly
every DMA-capable PCIe device. For example, our workload at Netflix
was spending nearly 1% of all CPU time going through this slow path.
Fix this problem by being more selective about when to set the
COULD_BOUNCE flag. Only set it when the boundary restriction
exists and the consumer cannot do more than a single DMA segment
at once. This fixes the case of dynamic buffers (mbufs, bio's)
but doesn't address static buffers allocated from bus_dmamem_alloc().
That case will be addressed in the future.
For those interested, this was discovered thanks to Dtrace Flame
Graphs.
Discussed with: jhb, kib
Obtained from: Netflix, Inc.
MFC after: 3 days
XSAVE Extended Features for AVX512 and MPX (Memory Protection Extensions).
Obtained from: Intel's Instruction Set Extensions Programming Reference
(March 2014)
Under the hood the VT-d spec is really implemented in terms of
PCI RIDs instead of bus/slot/function, even though the spec makes
pains to convert back to bus/slot/function in examples. However
working with bus/slot/function is not correct when PCI ARI is
in use, so convert to using RIDs in most cases. bus/slot/function
will only be used when reporting errors to a user.
Reviewed by: kib
MFC after: 2 months
Sponsored by: Sandvine Inc.
My PCI RID changes somehow got intermixed with my PCI ARI patch when I
committed it. I may have accidentally applied a patch to a non-clean
working tree. Revert everything while I figure out what went wrong.
Pointy hat to: rstone
Under the hood the VT-d spec is really implemented in terms of
PCI RIDs instead of bus/slot/function, even though the spec makes
pains to convert back to bus/slot/function in examples. However
working with bus/slot/function is not correct when PCI ARI is
in use, so convert to using RIDs in most cases. bus/slot/function
will only be used when reporting errors to a user.
Reviewed by: kib
Sponsored by: Sandvine Inc.
bridge takes ownership of the transaction, so bsf of the requester is
the bridge and not a device behind it. As result, code needs to walk
the hierarchy up to use correct context.
Note that PCIe->PCI-X bridges are not handled quite correctly since
such bridges are allowed to only take ownership of some transactions.
Also, weird but unrealistic cases of PCIe behind PCI bus are also not
handled.
Still, the patch provides significant step forward for the bridge
handling.
Submitted by: Jason Harmening <jason.harmening@gmail.com>
MFC after: 1 week
table. Among them, some (old AMI ?) BIOSes report entries with range
like (bf7ec000, bf7ebfff). Attempts to ignore the bogus entries
result in faults, so the range must be covered somehow.
Provide a workaround by identity mapping the 32 pages after the bogus
entry start, which seems to be enough for the reported BIOS.
Reported and tested by: Jason Harmening <jason.harmening@gmail.com>
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
The NetBSD Foundation states "Third parties are encouraged to change the
license on any files which have a 4-clause license contributed to the
NetBSD Foundation to a 2-clause license."
This change removes clauses 3 and 4 from copyright / license blocks that
list The NetBSD Foundation as the only copyright holder.
Sponsored by: The FreeBSD Foundation
AP startup on PVH follows the PV method, so we need to add a hook in
order to diverge from bare metal.
Approved by: gibbs
Sponsored by: Citrix Systems R&D
amd64/amd64/machdep.c:
- Add hook for start_all_aps on native (using native_start_all_aps
defined in mp_machdep).
amd64/amd64/mp_machdep.c:
- Make some variables global because they will also be used by the
Xen PVH AP startup code.
- Use the start_all_aps hook to start APs.
- Rename start_all_aps to native_start_all_aps.
amd64/include/smp.h:
- Add declaration for native_start_all_aps.
x86/include/init.h:
- Declare start_all_aps hook in init_ops.
x86/xen/pv.c:
- Pick external declarations from mp_machdep.
- Introduce Xen PV code to start APs on PVH.
- Set start_all_aps init hook to use the Xen PVH implementation.
On PVH we don't need to init the shared info page, or disable emulated
devices. Also, make sure PV IPIs are set before starting the APs.
Approved by: gibbs
Sponsored by: Citrix Systems R&D
x86/xen/hvm.c:
- Return early from functions that are no-ops on Xen PVH guests.
- In order to make sure PV IPIs are setup before AP startup,
initialize them in SI_SUB_SMP-1.
This hook will only be implemented for bare metal, Xen doesn't require
any bootstrap code since APs are started in long mode with paging
enabled.
Approved by: gibbs
Sponsored by: Citrix Systems R&D
amd64/amd64/machdep.c:
- Set mp_bootaddress hook for bare metal.
x86/include/init.h:
- Define mp_bootaddress in init_ops.
On PVH there's no ACPI, so the CPU enumeration must be implemented
using Xen hypercalls.
Approved by: gibbs
Sponsored by: Citrix Systems R&D
x86/xen/pvcpu_enum.c:
- Enumerate avaiable vCPUs on PVH by using the VCPUOP_is_up
hypercall.
- Set vcpu_id for PVH guests.
conf/files.amd64:
- Include the PV CPU enumerator in the XENHVM build.
Currently XEN (PV) and XENHVM (PVHVM) ports use different ways to
issue hypercalls, unify this by filling the hypercall_page under HVM
also.
Approved by: gibbs
Sponsored by: Citrix Systems R&D
amd64/include/xen/hypercall.h:
- Unify Xen hypercall code by always using the PV way.
i386/i386/locore.s:
- Define hypercall_page on i386 XENHVM.
x86/xen/hvm.c:
- Fill hypercall_page on XENHVM kernels using the HVM method (only
when running as an HVM guest).
e820 memory map is fetched using a hypercall under Xen PVH, so add a
hook to init_ops in oder to diverge from bare metal and implement a
Xen variant.
Approved by: gibbs
Sponsored by: Citrix Systems R&D
x86/include/init.h:
- Add a parse_memmap hook to init_ops, that will be called to fetch
and parse the memory map.
amd64/amd64/machdep.c:
- Decouple the fetch and the parse of the memmap, so the parse
function can be shared with Xen code.
- Move code around in order to implement the parse_memmap hook.
amd64/include/pc/bios.h:
- Declare bios_add_smap_entries (implemented in machdep.c).
x86/xen/pv.c:
- Implement fetching of e820 memmap when running as a PVH guest by
using the XENMEM_memory_map hypercall.
When running as a PVH guest, there's no emulated i8254, so we need to
use the Xen PV timer as the early source for DELAY. This change allows
for different implementations of the early DELAY function and
implements a Xen variant for it.
Approved by: gibbs
Sponsored by: Citrix Systems R&D
dev/xen/timer/timer.c:
dev/xen/timer/timer.h:
- Implement Xen early delay functions using the PV timer and declare
them.
x86/include/init.h:
- Add hooks for early clock source initialization and early delay
functions.
i386/i386/machdep.c:
pc98/pc98/machdep.c:
amd64/amd64/machdep.c:
- Set early delay hooks to use the i8254 on bare metal.
- Use clock_init (that will in turn make use of init_ops) to
initialize the early clock source.
amd64/include/clock.h:
i386/include/clock.h:
- Declare i8254_delay and clock_init.
i386/xen/clock.c:
- Rename DELAY to i8254_delay.
x86/isa/clock.c:
- Introduce clock_init that will take care of initializing the early
clock by making use of the init_ops hooks.
- Move non ISA related delay functions to the newly introduced delay
file.
x86/x86/delay.c:
- Add moved delay related functions.
- Implement generic DELAY function that will use the init_ops hooks.
x86/xen/pv.c:
- Set PVH hooks for the early delay related functions in init_ops.
conf/files.amd64:
conf/files.i386:
conf/files.pc98:
- Add delay.c to the kernel build.
Add hooks to amd64 in order to have diverging implementations, since
on Xen PV the metadata is passed to the kernel in a different form.
Approbed by: gibbs
Sponsored by: Citrix Systems R&D
amd64/amd64/machdep.c:
- Define init_ops for native.
- Put native code inside of native_parse_preload_data hook.
- Call the parse_preload_data in order to fill the metadata info.
x86/include/init.h:
- Declare the init_ops struct.
x86/xen/pv.c:
- Declare xen_init_ops that contains the Xen PV implementation of
init_ops.
- Implement the parse_preload_data for Xen PVH, the info is fetched
from HYPERVISOR_start_info->cmd_line as provided by Xen.
This adds and enables the PV console used on XEN kernels to
GENERIC/XENHVM kernels in order for it to be used on PVH.
Approved by: gibbs
Sponsored by: Citrix Systems R&D
dev/xen/console/console.c:
- Define console_page.
- Move xc_printf debug function from i386 XEN code to generic console
code.
- Rework xc_printf.
- Use xen_initial_domain instead of open-coded checks for Dom0.
- Gate the attach of the PV console to PV(H) guests.
dev/xen/console/xencons_ring.c:
- Allow the PV Xen console to output earlier by directly signaling
the event channel in start_info if the event channel is not yet
initialized.
- Use HYPERVISOR_start_info instead of xen_start_info.
i386/include/xen/xen-os.h:
- Remove prototype for xc_printf since it's now declared in global
xen-os.h
i386/xen/xen_machdep.c:
- Remove previous version of xc_printf.
- Remove definition of console_page (now it's defined in the console
itself).
- Fix some printf formatting errors.
x86/xen/pv.c:
- Add some early boot debug messages using xc_printf.
- Set console_page based on the value passed in start_info.
xen/xen-os.h:
- Declare console_page and add prototype for xc_printf.
Add the PV/PVH entry point and the low level functions for PVH
early initialization.
Approved by: gibbs
Sponsored by: Citrix Systems R&D
amd64/amd64/genassym.c:
- Add __FreeBSD_version define to assym.s so it can be used for the
Xen notes.
amd64/amd64/locore.S:
- Make bootstack global so it can be used from Xen kernel entry
point.
amd64/amd64/xen-locore.S:
- Add Xen notes to the kernel.
- Add the Xen PV entry point, that is going to call hammer_time_xen.
amd64/include/asmacros.h:
- Add ELFNOTE macros.
i386/xen/xen_machdep.c:
- Define HYPERVISOR_start_info for the XEN i386 PV port, which is
going to be used in some shared code between PV and PVH.
x86/xen/hvm.c:
- Define HYPERVISOR_start_info for the PVH port.
x86/xen/pv.c:
- Introduce hammer_time_xen which is going to perform early setup for
Xen PVH:
- Setup shared Xen variables start_info, shared_info and
xen_store.
- Set guest type.
- Create initial page tables as FreeBSD expects to find them.
- Call into native init function (hammer_time).
xen/xen-os.h:
- Declare HYPERVISOR_start_info.
conf/files.amd64:
- Add amd64/amd64/locore.S and x86/xen/pv.c to the list of files.
Move asm IPIs handlers to C code, so both Xen and native IPI handlers
share the same code.
Reviewed by: jhb
Approved by: gibbs
Sponsored by: Citrix Systems R&D
amd64/amd64/apic_vector.S:
i386/i386/apic_vector.s:
- Remove asm coded IPI handlers and instead call the newly introduced
C variants.
amd64/amd64/mp_machdep.c:
i386/i386/mp_machdep.c:
- Add C coded clones to the asm IPI handlers (moved from
x86/xen/hvm.c).
i386/include/smp.h:
amd64/include/smp.h:
- Add prototypes for the C IPI handlers.
x86/xen/hvm.c:
- Move the C IPI handlers to mp_machdep and call those in the Xen IPI
handlers.
i386/xen/mp_machdep.c:
- Add dummy IPI handlers to the i386 Xen PV port (this port doesn't
support SMP).
