This change enables natural scrolling with two finger scroll enabled
and when user is using a trackpad (mouse and trackpoint are not affected).
Depending on trackpad model it can be activated with setting of
hw.psm.synaptics.natural_scroll or hw.psm.elantech.natural_scroll sysctl
values to 1.
Evdev protocol is not affected by this change too. Tune userland client
e.g. libinput to enable natural scrolling in that case.
Submitted by: nyan_myuji.xyz
Reviewed by: wulf
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20447
completions are not in a consistent state. Cope with the different
places the normal I/O completion polling thread can be interrupted and
then re-entered during a kernel panic + dump.
Reviewed by: jhb and markj (both prior versions)
Differential Revision: https://reviews.freebsd.org/D20478
When starting a command also print the opcode and flags.
More consitently print flags as hex.
Use slot_printf rather than printf in one case.
MFC after: 6 weeks
Reviewed by: marius, kibab, imp
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19748
receive sockbuf's high water mark.
Calculate rx credits on the spot instead of tracking sbused/sb_cc and
rx_credits in the toepcb. The previous method worked when the high
water mark changed due to SB_AUTOSIZE but not when it was adjusted
directly (for example, by the soreserve in nfsrvd_addsock).
This fixes a connection hang while running iozone over an NFS mounted
share where nfsd's TCP sockets are being handled by t4_tom.
MFC after: 3 days
Sponsored by: Chelsio Communications
I introduced an obvious compiler error in r346282, so this change fixes
that.
Unfortunately, RANDOM_LOADABLE isn't covered by our existing tinderbox, and
it seems like there were existing latent linking problems. I believe these
were introduced on accident in r338324 during reduction of the boolean
expression(s) adjacent to randomdev.c and hash.c. It seems the
RANDOM_LOADABLE build breakage has gone unnoticed for nine months.
This change correctly annotates randomdev.c and hash.c with !random_loadable
to match the pre-r338324 logic; and additionally updates the HWRNG drivers
in MD 'files.*', which depend on random_device symbols, with
!random_loadable (it is invalid for the kernel to depend on symbols from a
module).
(The expression for both randomdev.c and hash.c was the same, prior to
r338324: "optional random random_yarrow | random !random_yarrow
!random_loadable". I.e., "random && (yarrow || !loadable)." When Yarrow
was removed ("yarrow := False"), the expression was incorrectly reduced to
"optional random" when it should have retained "random && !loadable".)
Additionally, I discovered that virtio_random was missing a MODULE_DEPEND on
random_device, which breaks kld load/link of the driver on RANDOM_LOADABLE
kernels. Address that issue as well.
PR: 238223
Reported by: Eir Nym <eirnym AT gmail.com>
Reviewed by: delphij, markm
Approved by: secteam(delphij)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D20466
misleading indentation. This is found by gcc -Wmisleading-indentation
Approved by: erj
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20428
it hasn't been initialized.
This fixes a bug in r346570 that could cause a panic when servicing
TCP_INFO for offloaded connections.
MFC after: 3 days
Sponsored by: Chelsio Communications
ENAv2 introduces many new features, bug fixes and improvements.
Main new features are LLQ (Low Latency Queues) and independent queues
reconfiguration using sysctl commands.
The year in copyright notice was updated to 2019.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
For easier debugging, the reset is being triggered and the reset reason is
being set only in case it is done for the first time. Such approach will
ensure that the first reset reason is not going to be overwritten and
will make it easier for debugging.
Also, add a reset trigger upon invalid Tx requested ID.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
If the call to ena_up() in ena_restore_device() fails, next usage of
`ifconfig up` will cause NULL pointer dereference.
This patch adds additional checks to prevent that.
Submitted by: Rafal Kozik <rk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Some messages were missing new line character and traces were not having
unified behavior. To fix that, each trace and printout should add new
line character at the end of each string - that should improve
readability.
Submitted by: Rafal Kozik <rk@semihalf.com>
Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
If the headers of the packets are split into multiple segments of the
mbuf chain, the previous version of ena_tx_csum which was assuming,
that all segments will lay in the first mbuf, will eventually fail to
map the headers properties to meta descriptor.
That will cause Tx checksum offload to do not work and was leading to
memory corruption. It could even cause the crash of the system.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
For alignment with Linux driver and better handling ena_detach(), the
reset is now calling ena_device_restore() and ena_device_destroy().
The ena_device_destroy() is also being called on ena_detach(), so the
code will be more readable.
The watchdog is now being activated after reset only, if it was active
before.
There were added additional checks to ensure, that there is no race with
the link state change AENQ handler.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
As the ENA can have multiple states turned on/off, it is more convenient
to store them in single bitfield instead of multiple boolean variables.
The bitset FreeBSD API was used for the bitfield implementation, as it
provides flexible structure together with API which also supports atomic
bitfield operations.
For better readability basic macros from API were wrapped into custom
ENA_FLAG_* macros, which are filling up common parameters for all calls.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Before the patch, error handling was not releasing all resources and
was not issuing device reset if the reset task failed.
That could cause memory leak and fault of the device.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
The host info bdf field is the abbreviation for the bus, device,
function of the PCI on which the device is being attached to.
Now the driver is filling information about that using FreeBSD RID
resource.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
The new ENA HAL is introducing API, which can determine on Tx path if
the doorbell is needed.
That way, it can tell the driver, that it should call an doorbell.
The old threshold value wasn't removed, as not all HW is supporting this
feature - so it was reworked to also work with the new API.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
The Rx ring size can be as high as 8k. Because of that we want to limit
the cleanup threshold by maximum value of 256.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
LLQ (Low Latency Queue) is the feature, that allows pushing header
directly to the device through PCI before even DMA is triggered.
It reduces latency, because device can start preparing packet before
payload is sent through DMA.
To speed up sending data through PCI, the Write Combining is enabled,
which allows hardware to buffer data before sending them on the PCI - it
allows to reduce number of PCI IO operations.
ENAv2 is using special descriptor for the negotiation of the LLQ.
Currently, only the default configuration is supported.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Handle IO interrupts using filter routine. That way, the main cleanup
task could be moved to the separate thread using taskqueue.
The deferred Rx cleanup task was removed, and now the cleanup task is
begin called instead. That way, the Rx lock could be removed.
In addition, Queue management (wake up and stop TX ring) was added, so
the TX cleanup task can be performed mostly lockless.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
The driver now supports per adapter tuning of buffer ring size and HW Rx
ring size.
It can be achieved using sysctl node dev.ena.X.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
If the requested ID was out of range, the tx_info structure was NULL and
the function was trying to access the field of the NULL object.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
The if_detach was causing crash if the MSI-x configuration in the attach
failed. To prevent this issue, the ifnet is being configured at the end
of the attach function.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
In rare case, when the ifconfig is called just before kldunload, it is
possible, that ena_up routine will be called after queue locks are
released.
To prevent that, ifp is detached before the last ena_down is called and
further, the ifp is freed at the end of the function.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
The ENA driver needs at least 2 MSI-x - one for admin queue, and one for
IO queues pair. If there were not enough resources to allocate more than
one MSI-x, the device should not be attached.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
bus_alloc_resource_any() is not returning error value in case of an
error.
If the function call fails, the error value was not passed to the
ena_up() function.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
To prevent errors from assigning values from the DMA structure in case
of an error, zero the vaddr and paddr values upon failure.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
The DMA in FreeBSD requires explicit synchronization. ENA driver was
only doing PREREAD and PREWRITE synchronizations. Missing
bus_dmamap_sync() calls were added.
It is also required to synchronize DMA engine before unloading DMA map.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
If the first MSI-x won't be executed, then the timer service will detect
that and trigger device reset.
The checking for missing Tx completion was reworked, so it will also
check for missing interrupts. Checking number of missing Tx completions
can be performed after loop, instead of checking it every iteration.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
The new ena_com allows the number of CPUs to be passed to the device in
the host info structure as a hint.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Information about Tx error should be only displayed, if packet
preparation failed due to error other than out of memory.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Whenever the driver will receive too many descriptors from the device,
it should trigger the device reset, as it is indicating that the device
is in invalid state.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Receive Side Scaling is optional feature that could be enabled in kernel
configuration by defining flag RSS.
Kernel uses hash to store and find protocol control block which is
stored in hash tables.
Kernel and NIC hash functions must be consistent. Otherwise case lookup
fails.
To achieve this kernel provides API to set proper hash key to NIC.
As it is not possible to change key for virtual ENA NIC, this driver
cannot support RSS function.
ENA is designed to work in virtual environments so supporting hardware
version of this card is unnecessary.
Submitted by: Rafal Kozik <rk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Notification AENQ handler is responsible for handling requests from ENA
device. Missing Tx threshold, Tx timeout and keep alive timeout can be
set using hints from the aenq descriptor which can be delivered in the
ENA admin notification.
The queue suspending and resuming tasks are not supported by the
driver.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
ENA_ADMIN_FATAL_ERROR and ENA_ADMIN_WARNING aenq groups were indicated
as supported, so the unimplemented_aenq_handler() will print out error
message, whenever an error will occur within the ENA admin context.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
As the ENA is working only in virtualized environment, the active media
is not specified. Instead, the active link type is set as unknown.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Recent HAL change preparing to support ENAv2 required minor driver
modifications.
The ena_com_sq_empty_space() is not available in this ena-com, so it had
to be replaced with ena_com_free_desc().
Moreover, the ena_com_admin_init() is no longer using 3rd argument
indicating if the spin lock should be initialized, so it was removed.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
the code is not guarded by the if clause and has misleading indentation.
Approved by: scottl
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20427
Since drm2 removal, there has not been any consumer of the feature in the
tree. I am also unaware of any out-of-tree consumer.
More importantly, the feature has been broken from the very start, both
before and after r306589, because the ivar was set on a device that does
not support it and it was read from another device that also does not
support it.
A bus-wide no-stop flag cannot be implemented as an ivar as iicbus
attaches as a child of various drivers. Implementing the ivar in each
and every I2C driver is just impractical.
If we ever want to implement this feature properly, then probably the
easiest way to do it would be via a flag in the softc of iicbus.
In fact, we might have to do that in the stable branches if we want to
fix the code for them.
Reported by: ian (long time ago)
MFC after: 1 month (maybe)
X-MFC-note: cannot just merge the change, must keep drm2 happy
As I see, different NICs in different configurations may have different
numbers of TX and RX queues. The code was assuming 1:1 mapping between
event queues (interrupts) and TX/RX queues. Since number of interrupts
is set to maximum of TX and RX queues, when those two are different, the
system is doomed.
I have no documentation or deep knowledge about this hardware, so this
change is based on general observations and code reading. If some of my
guesses are wrong, please do better. I just confirmed HP NC550SFP NICs
are working now.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
