o call firmware_put() early to release the firmware module
o on firmware panics or watchdog timeouts, schedule a task to reinitialize
the interface (we may sleep in iwi_init())
o discard oversized rx frames
This does not do what I wanted as all dirty buffers must be flushed
by the call to ffs_sync and any remaining dependency work would mean
that this failed.
Pointed out by: tegge
This does not do what I wanted as all dirty buffers must be flushed
by the call to ffs_sync and any remaining dependency work would mean
that this failed.
Pointed out by: tegge
Fix detection of active unlinked files by checking VI_OWEINACT and
VI_DOINGINACT in addition to v_usecount.
Defer inactive handling for unlinked files if the file system is mostly
suspended (secondary writes being blocked).
Perform deferred inactive handling after the file system is resumed.
flag isn't enough - the filter needs to be set up too, or no multicast frames
are accepted.
Sponsored by: Philips Industrial Applications (indirectly)
MFC after: 3 days
o stop processing interrupts after a firmware fatal error or a radio kill
o clarify the possible values for the 'antenna' sysctl.
o by default, let the firmware do antenna diversity.
the firmware will periodically switch to another antenna to evaluate the
signal quality.
ATA framework. Mainly written to be able to use USB Flash keys.
This is work in progress so use with care :)
Doesn't need CAM and cannot coexist with umass.c
means that old problem was triggered (when two providers end at the same
offset, eg. ad0 and ad0s1 and the wrong was is picked up by gmirror/graid3).
Reported by: Michal Suszko <dry@dry.pl>
MFC after: 3 days
Use 'BOOT_SENSITIVE_INFO=YES' variable to turn them on.
- Use 'uint*_t' instead of 'u_int*_t', correct compilation warnings, and
update copyright while I am here.
In at least one benchmark this showed around a 20% performance increase.
If other workloads do benefit from having hyperthreads service interrupts,
we can always make this a loader tunable.
MFC after: 3 days
Tested by: ps
which is normal for own files of a device driver.
DEV_FOO should be used if an unrelated kernel file needs to know of
the `foo' driver's static presence. Obviously, module source files
should never use DEV_*.
triggers.
This should eliminate all the trivial messages which result from minor
increases in cpu_tick frequency.
Machines which don't du cpu clock fiddling shouldn't issue "backwards"
messages now.
Laptops and other machines where the initial estimate of cputicks may be
waaaay off will still issue warnings.
replacement for vn_write_suspend_wait() to better account for secondary write
processing.
Close race where secondary writes could be started after ffs_sync() returned
but before the file system was marked as suspended.
Detect if secondary writes or softdep processing occurred during vnode sync
loop in ffs_sync() and retry the loop if needed.
actually is an mbuf to process. This catches the missing mbuf before it
would otherwise causes a NULL pointer dereference, which could be
triggered by a 0 length RPC record before the check for such records was
added in rev 1.97.
Approved by: cperciva (mentor)
The client's READDIRPLUS logic skips the attributes and
filehandle of the ".." entry. If the server doesn't send
attributes but does send a filehandle for "..", the
client's logic doesn't account for the extra "value
follows" field that indicates whether the filehandle is
present, causing the remaining entries in the reply
to be ignored.
Sponsored by: Network Appliance, Inc.
Reviewed by: rick, mohans
Approved by: silby
MFC after: 2 weeks
table. Previously, the ddb code knew of each linker set of auxiliary
commands and which explicit command list they were tied to. These changes
add a simple command_table struct that contains both the static list of
commands and the pointers for any auxiliary linker set of additional
commands. This also makes it possible for other arbitrary command tables
to be defined in other parts of the kernel w/o having to edit ddb itself.
The DB_SET macro has also been trimmed down to just creating an entry in
a linker set. A new DB_FUNC macro does what the old DB_SET did which is
to not only add an entry to the linker set but also to include a function
prototype for the function being added. With these changes, it's now also
possible to create aliases for ddb functions using DB_SET() directly if
desired.
slightly more tricky than on x86 as although the PCC is 64-bits, it is not
a simple 64-bit counter like the TSC. Instead, the upper 32-bits have
PAL-defined behavior and the lower 32-bits run as a free-running 32-bit
counter. To handle this, we detect overflows by maintaining a small amount
of per-cpu state and use this to simulate the upper 32-bits of the counter
providing a full 64-bit counter to the consumers of cpu_ticks().
an interrupt handler for the i8254. (Our clock interrupts come from
elsewhere.) Instead, use the same algo that i386 uses when the lapic
timer is in use. This lets us remove a lot of cruft that tried to handle
the i8254 interrupts that we weren't even using or setting up a handler
for.
- G/C a bunch of unused cruft while I'm here.
- Fix the code to not use the rpcc timecounter (similar to TSC) on SMP
machines to only disable that timecounter if more than one CPU is in
use by the kernel. Previously, a UP kernel on a machine with multiple
CPUs would needlessly disable this timecounter.
MFC after: 1 week
whether or not to allocate a full mbuf cluster rather than just a plain
mbuf when adding on additional mbufs in m_getm(). In practice, there wasn't
any resulting mem trashing since m_getm() doesn't ever allocate an mbuf with
a packet header, and MINCLSIZE is the available payload in an mbuf with a
header rather than the available payload in a plain mbuf.
Discussed with: andre (lightly)
will remain in the disabled state until another link event happens in the
future (if at all). Add a timer to periodically check the interface state and
recover.
Reported by: Nik Lam <freebsdnik j2d.lam.net.au>
MFC after: 3 days
enabled by default in NETSMB and smbfs.ko.
With the most of modern SMB providers requiring encryption by
default, there is little sense left in keeping the crypto part
of NETSMB optional at the build time.
This will also return smbfs.ko to its former properties users
are rather accustomed to.
Discussed with: freebsd-stable, re (scottl)
Not objected by: bp, tjr (silence)
MFC after: 5 days
generations of 802.11abg chipsets from Ralink Technology.
Get rid of the pccard front-end while I'm here since all adapters are
cardbus ones.
Obtained from: OpenBSD
vnode and a mode and checks if a given access mode is permitted.
This centralises the mac_bsdextended_enabled check and the GETATTR
calls and makes the implementation of the mac policy methods simple.
This should make it easier for us to match vnodes on more complex
attributes than just uid and gid in the future, but for now there
should be no functional change.
Approved/Reviewed by: rwatson, trhodes
MFC after: 1 month
sysinstall(8) still bogusly puts first partition at offset 0 instead of 16,
so glabel/ufs will find file system on slice instead of partition.
Before sysinstall is fixed, we must keep this code, which means that we
wont't be able to detect UFS file systems created with 'newfs -s ...'.
PS. bsdlabel(8) creates partitions properly.
MFC after: 3 days
- Include audit_internal.h to get definition of internal audit record
structures, as it's no longer in audit.h. Forward declare au_record
in audit_private.h as not all audit_private.h consumers care about
it.
- Remove __APPLE__ compatibility bits that are subsumed by configure
for user space.
- Don't expose in6_addr internals (non-portable, but also cleaner
looking).
- Avoid nested include of audit.h in audit_private.h.
Obtained from: TrustedBSD Project
- Add new comments.
- Move private data structures from public audit.h to audit_internal.h to
avoid exposing queue.h macros to undesiring consumers.
Obtained from: TrustedBSD Project
