Assert that sockets are of the same type. unp_connectat() already did
this check. Add the check to uipc_connect2().
Reviewed by: markj
Differential revision: https://reviews.freebsd.org/D35181
Since c67f3b8b78 the sockbuf mutexes belong to the containing socket,
and socket buffers just point to it. In 74a68313b5 macros that access
this mutex directly were added. Go over the core socket code and
eliminate code that reaches the mutex by dereferencing the sockbuf
compatibility pointer.
This change requires a KPI change, as some functions were given the
sockbuf pointer only without any hint if it is a receive or send buffer.
This change doesn't cover the whole kernel, many protocols still use
compatibility pointers internally. However, it allows operation of a
protocol that doesn't use them.
Reviewed by: markj
Differential revision: https://reviews.freebsd.org/D35152
If we already had a pipe set in the actions struct we need to take care
to clear the flag if we're overwriting it with a queue.
This can happen if we've got Ethernet rules setting a dummynet pipe.
It does this indirectly, by adding the dummynet information to a pf_mtag
associated with the mbuf.
Sponsored by: Rubicon Communications, LLC ("Netgate")
If we delay route-to/dup-to/reply-to through dummynet we are eventually
returned to pf_test(). At that point we no longer have the context for
the route-to destination. We'd just skip the pf_test() and continue
processing. This means that route-to did not work as expected.
Extend pf_mtag to carry the route-to destination so we can apply it when
we re-enter pf_test().
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D35159
If packets are processed by a route-to/dup-to/reply-to rule (i.e. they
pass through pf_route(6)) dummynet was not applied to them.
This is because pf_route(6) passes packets directly to ifp->if_output(),
so the dummynet functions were never called.
Factor out the dummynet code and call dummynet prior to
ifp->if_output(). This has a secondary benefit of reducing some code
duplication between the IPv4 and IPv6 paths.
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D35158
First paragraph refers to old past "we used to" and is no longer
important today. Second paragraph has just a wrong statement that
socket buffer is destroyed before pru_detach.
On success gnu libc sched_getaffinity() should return 0, unlike underlying
Linux syscall which returns the size of CPU mask copied to user.
PR: 263939
MFC after: 2 weeks
With the additional benefit of removing all the _all() functions and
treating a NULL list as "all" ‒ the remaining all function is for all
/datasets/, which is consistent with the rest of the API
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#13165
This makes it so we don't leak a consistent 64 bytes anymore,
makes the searches simpler and faster, removes /all allocations/
from the driver (quite trivially, since they were absolutely needless),
and makes libshare thread-safe (except, maybe, linux/smb, but that only
does pointer-width loads/stores so it's also mostly fine, except for
leaking smb_shares)
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#13165
This renders it thread-safe
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#13165
When the HAVE_IOPS_MKDIR_USERNS check fails output result
as required.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#13454
The zloop.sh script is primarily designed to randomly stress
the DMU and SPA layers. This can result in some unrealistic
(or even impossible) scenarios being tested which then fail.
Since the longer we run zloop.sh the more likely this is to occur
this commit reduces the runtime. The intention being that normally
this will result in a clean CI run unless the PR does introduce
serious breaking change.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#13453
Extend the size of the local rx_buffer_size variable to account for
larger buffer sizes possible on 82580, i350 chips.
From i350 datasheet, 6.2.10 Initialization Control 4 (LAN Base Address
+ Offset 0x13):
When 4 ports are enabled maximum buffer size is 36 KB. When 2 ports are
enabled maximum buffer size is 72 KB. When only a single port is
enabled maximum buffer size is 144 KB.
and 8.3:
The overall available internal buffer size in the I350 for all ports is
144 KB for receive buffers and 80 KB for transmit Buffers. Disabled
ports memory can be shared between active ports and sharing can be
asymmetric. The default buffer size for each port is loaded from the
EEPROM on initialization.
From the reporter:
But for I350 when only 2 ports are used PBA size can be set as 72KB
(see datasheet RXPbsize or e1000_rxpbs_adjust_82580 function in
e1000_82575.c). In this case calculating the rx_buffer_size overflows
as 0x0048 << 10 = 73728 or 0x12000 pushed into u16. It is then set as
0x2000 or 8192.
PR: 263896
Reported by: hannula@gmail.com
Tested by: hannula@gmail.com
Approved by: markj
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D35167
The PermitRootLogin option "prohibit-password" was added as a synonym
for "without-password" in 2015. Then in 2017 these were swapped:
"prohibit-password" became the canonical option and "without-password"
became a deprecated synonym (in OpenSSH commit 071325f458).
The UsePAM description in sshd_config still mentioned
"without-password." Update it to match the new canonical option.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
In some build configurations a warning about (an absolute path for)
-fuse-ld= not being supported by GCC was emitted during cleandir or
other non-build make targets.
For these non-build targets COMPILER_TYPE is set to "none" but we
treated the .else case for COMPILER_TYPE==clang as implying gcc.
Check instead for COMPILER_TYPE==gcc.
PR: 263913
Reported by: pstef
Reviewed by: pstef
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
This implementation uses the concurrency kit, CK, API directly which is
suitable for use with EPOCH(9) and RCU under FreeBSD.
No functional change intended.
The initial "linux/hash.h" code was obtained from DragonFlyBSD via
FreeBSD's drm-kmod in ports.
Differential Revision: https://reviews.freebsd.org/D35162
Reviewed by: bz@ and markj@
MFC after: 1 week
Sponsored by: NVIDIA Networking
Linux passes -Wframe-larger-than=1024, which breaks
our build in a number of places with -Werror.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes#13450
This changes the behaviour of -B from the illumos one which would,
in the example in the manual, take just ./chroots/lenny;
this, however, is more versatile, and scales much better for systems
with ZFS in /usr/local, for example
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#13411Closes#1770
Even on Illumos it's only available in the 32-bit programming
environment, and, quoth enable_extended_FILE_stdio(3C):
> Historically, 32-bit Solaris applications have been limited to using
> only the file descriptors 0 through 255 with the standard I/O
> functions (see stdio(3C)) in the C library. The extended FILE
> facility allows well-behaved 32-bit applications to use any
> valid file descriptor with the standard I/O functions.
where "well-behaved" means that it
> does not directly access any fields in the FILE structure pointed
> to by the FILE pointer associated with any standard I/O stream,
And the stdio/flush.c implementation reads:
/*
* if this is not an internal extended FILE then check
* if _file is being changed from underneath us.
* It should not be because if
* it is then then we lose our ability to guard against
* silent data corruption.
*/
if (!iop->__xf_nocheck && bad_fd > -1 && iop->_magic != bad_fd) {
(void) fprintf(stderr,
"Application violated extended FILE safety mechanism.\n"
"Please read the man page for extendedFILE.\nAborting\n");
abort();
}
This appears to be an insane workaround for broken implementation with
exposed FILE internals and _file being an u8, both only on non-LP64;
it's shimmed out on all LP64 targets in Illumos,
and we shim it out as well: just get rid of it
This appears to've been originally fixed in illumos-gate
a5f69788de7ac07553de47f7fec8c05a9a94c105 ("PSARC 2006/162 Extended FILE
space for 32-bit Solaris processes", "1085341 32-bit stdio routines
should support file descriptors >255"), which also bears extendedFILE
and enable_extended_FILE_stdio(3C):
- unsigned char _file; /* UNIX System file descriptor */
+ unsigned char _magic; /* Old home of the file descriptor */
+ /* Only fileno(3C) can retrieve the
value now */
and
+/*
+ * Macros to aid the extended fd FILE work.
+ * This helps isolate the changes to only the 32-bit code
+ * since 64-bit Solaris is not affected by this.
+ */
+#ifdef _LP64
+#define GET_FD(iop) ((iop)->_file)
+#define SET_FILE(iop, fd) ((iop)->_file = (fd))
+#else
+#define GET_FD(iop) \
+ (((iop)->__extendedfd) ? _file_get(iop) : (iop)->_magic)
+#define SET_FILE(iop, fd) (iop)->_magic = (fd); (iop)->__extendedfd = 0
+#endif
Also remove the 1k setrlimit(NOFILE) calls: that's the default on Linux,
with 64k on Illumos and 171k on FreeBSD
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#13411
Commit 63b18e4 fixed an issue in zpl_aio_write() to make sure that
kiocb->ki_pos was updated correctly when opening a file with O_APPEND.
Adding a test to verify O_APPEND functionality with lseek can make
sure that all other distros/kernel versions also have the correct
behavior.
Also moved the threadappends_001_pos test into this append test
directory in functional ZTS directory. This way the two append tests
are together for organization purposes.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Brian Atkinson <batkinson@lanl.gov>
Closes#13424