except to document the hardcoded standard library search path for 32-bit
binaries. The third line performs the equivalent substitution for the
private library directory.
Ironically, these entries rely on functionality which is only available
in the COMPAT_32BIT version of rtld-elf.
Approved by: re (blanket)
we don't want to expose but which can't or shouldn't be static.
To mark a library as private, define PRIVATELIB in its Makefile. It
will be installed in LIBPRIVATEDIR, which is normally /usr/lib/private
(or /usr/lib32/private for 32-bit libraries on 64-bit platforms).
To indicate that a program or library depends on a private library,
define USEPRIVATELIB in its Makefile. The correct version of
LIBPRIVATEDIR will be added to its run-time library search path.
Approved by: re (blanket)
headrs.
Lots of third-party code expects to find C++03 headers under tr1 because that's
where GNU decided to hide them. This should fix ports that expect them there.
MFC after: 1 week
independently. There is no reason to leave their options
with the daily ones, so move them to their own section.
Move periodic scripts' options into their own section. Since r254974,
These are included unconditionally for now because bsdconfig
is currently installed unconditionally.
This fixes 'make -j 17 installworld' caused by a race
condition.
MFC candidate.
If we panic again shortly after boot (say, within 30 seconds), any core
dump we wrote out may be lost on reboot. In this situation, we really
want to keep that core file, as it may be the only way to have the issue
resolved. Call sync(8) after writing out the core file and running
crashinfo(8), in the hope that these will not be lost if we panic
again. sync(8) is only called in the case where there is a core dump
to be written out, so won't be called during normal boots.
Discovered by: Trying to debug an IPSEC panic
MFC after: 1 week
There are now six additional variables
weekly_status_security_enable
weekly_status_security_inline
weekly_status_security_output
monthly_status_security_enable
monthly_status_security_inline
monthly_status_security_output
alongside their existing daily counterparts. They all have the same
default values.
All other "daily_status_security_${scriptname}_${whatever}"
variables have been renamed to "security_status_${name}_${whatever}".
A compatibility shim has been introduced for the old variable names,
which we will be able to remove in 11.0-RELEASE.
"security_status_${name}_enable" is still a boolean but a new
"security_status_${name}_period" allows to define the period of
each script. The value is one of "daily" (the default for backward
compatibility), "weekly", "monthly" and "NO".
Note that when the security periodic scripts are run directly from
crontab(5) (as opposed to being called by daily or weekly periodic
scripts), they will run unless the test is explicitely disabled with a
"NO", either for in the "_enable" or the "_period" variable.
When the security output is not inlined, the mail subject has been
changed from "$host $arg run output" to "$host $arg $period run output".
For instance:
myfbsd security run output -> myfbsd security daily run output
I don't think this is considered as a stable API, but feel free to
correct me if I'm wrong.
Finally, I will rearrange periodic.conf(5) and default/periodic.conf
to put the security options in their own section. I left them in
place for this commit to make reviewing easier.
Reviewed by: hackers@
"/etc/rc.d/netif stop XXX". The old globbing pattern failed to account for the
possibility of a tab occuring before "inet".
Reviewed by: will
Approved by: ken (mentor, implicit)
MFC after: Never (bug affects head only)
Sponsored by: Spectra Logic
Newly-configured systems should use $cloned_interfaces.
- Call clone_{up,down}() and ifnet_rename() in rc.d/netif {start,stop}.
ifnet_rename() now accepts an interface name list as its argument.
- Add rc.d/netif clear. The "clear" subcommand is basically equivalent to
"stop" but it does not call clone_down().
- Add "ifname:sticky" keyword into $cloned_interfaces. If :sticky is
specified, the interface will not be destroyed in rc.d/netif stop.
- Add cloned_interfaces_sticky={YES,NO}. This variable globally sets
:sticky keyword above for all interfaces. The default value is NO.
When cloned_interfaces_sticky=YES, :nosticky keyword can be used to
override it on per interface basis.
- inet 192.0.2.1-10 netmask 255.255.255.0 (inet range spec + ifconfig options)
- inet6 2001:db8:1::1-f prefixlen 60 (inet6 range spec + ifconfig options)
If prefixlen or netmask option is specified with CIDR notation at
the same time, the option is used.
Tested by: Michael Grimm
MFC after: 3 days
notation like 2001:db8:1:1.
- Use eui64 flag in ifconfig(8) instead of network6_getladdr()[*] for
interface indentifier part.
Suggested by: ume [*]
MFC after: 3 days
sbin/devd/devd.cc
All output will now go to syslog(3) if devd is daemonized, or stderr
if it's running in the foreground.
sbin/devd/devd.8
Remove the "-D" flag. Filtering messages by priority now
happens in the usual syslog way. For performance reasons, a few
extra-verbose debugging statements are now conditional on the "-d" (do
not daemonize) flag.
etc/syslog.conf
etc/newsyslog.conf
Direct messages from devd(8) to /var/log/devd.log, but leave it
disabled by default
Reviewed by: eadler
Approved by: gibbs (co-mentor)
MFC after: never (removed a command-line option from devd)
- Reconnect with some minor modifications, in particular now selsocket()
internals are adapted to use sbintime units after recent'ish calloutng
switch.
device names "md" or "md[0-9]*" and a "file" option are specified in
/etc/fstab like this:
md none swap sw,file=/swap.bin 0 0
- Add GBDE/GELI encrypted swap space specification support, which
rc.d/encswap supported. The /etc/fstab lines are like the following:
/dev/ada1p1.bde none swap sw 0 0
/dev/ada1p2.eli none swap sw 0 0
.eli devices accepts aalgo, ealgo, keylen, and sectorsize as options.
swapctl(8) can understand an encrypted device in the command line
like this:
# swapctl -a /dev/ada2p1.bde
- "-L" flag is added to support "late" option to defer swapon until
rc.d/mountlate runs.
- rc.d script change:
rc.d/encswap -> removed
rc.d/addswap -> just display a warning message if $swapfile is defined
rc.d/swap1 -> renamed to rc.d/swap
rc.d/swaplate -> newly added to support "late" option
These changes alleviate a race condition between device creation/removal
and swapon/swapoff.
MFC after: 1 week
Reviewed by: wblock (manual page)
Not only this is a bit cleaner, it allows multiple instances of hostapd to be
running on the system host, useful for simultaneous dual-band WiFi.
This is similar to ifconfig_wlanX="WPA" but it uses /etc/hostapd-wlanX.conf.
Compatibility with hostapd_enable=YES/NO was kept.
Reviewed by: adrian
forced to 3 so that the output of this script is always displayed.
In fact, setting this flag is identical to setting
daily_status_security_output to an empty string. To make the logic
less confusing, change the behavior of daily_status_security_inline
such that it just forces daily_status_security_output to an empty
string and then applies the normal logic.
PR: conf/178611
Submitted by: Jason Unovitch <jason.unovitch@gmail.com>
MFC after: 3 days
requests reload or restart, which, in addition of testing the
configuration, will also generate host keys when they are not
present (previous behavior).
Obtained from: FreeNAS
Ok'ed by: bdrewery, des
MFC after: 1 week
This is an extended version of ipv4_addr_IF which supports both IPv4 and
IPv6, and multiple range specifications. To avoid to generate too many
addresses, the maximum number of the generated addresses is currently
limited to 31.
- Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable.
- ipv6_prefix_IF now supports !/64 prefix length. In addition to the old
64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64
is supported.
- Replace ifconfig command with $IFCONFIG_CMD variable to support
a dry-run mode in the future.
- Remove IP aliases before removing all of IPv4 addresses when doing
"rc.d/netif down".
- Add a DAD wait to network6_getladdr() because it is possible to fail to
configure an EUI64 address when ipv6_prefix_IF is specified.
A summary of the supported ifconfig_* variables is as follows:
# IPv4 configuration.
ifconfig_em0="inet 192.168.0.1"
# IPv6 configuration.
ifconfig_em0_ipv6="inet6 2001:db8::1/64"
# IPv4 address range spec. Now deprecated.
ipv4_addr_em0="10.2.1.1-10"
# IPv6 alias.
ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70"
# IPv4 alias.
ifconfig_em0_alias1="inet 10.2.2.1/24"
# IPv4 alias with range spec w/o AF keyword (backward compat).
ifconfig_em0_alias2="10.3.1.1-10/32"
# IPv6 alias with range spec.
ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64"
# ifconfig_IF_aliases is just like ifconfig_IF_aliasN.
ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24"
# IPv6 alias (backward compat)
ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64"
# IPv6 alias w/o AF keyword (backward compat)
ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64"
# IPv6 prefix.
ipv6_prefix_em0="2001:db8::/64"
Tested by: Kimmo Paasiala
ntpdate_config was set to NULL the conditional would (counter to prevailing
logic) succeed -- leading to awk attempting to redirect from a NULL pathname
standard-in. While we're here, make the script consistant with itself by
removing the {curlies} around ntpdate_config (they are unnecessary).
