the limit in bytes) hard coded into both the kernel and userland.
Make both these limits a sysctl, so it is easy to change the limit.
If the userland part of ipfw finds that the sysctls don't exist,
it will just fall back to the traditional limits.
(100 packets is quite a small limit these days. If you want to test
TCP at 100Mbps, 100 packets can only accommodate a DBP of 12ms.)
Note these sysctls in the man page and warn against increasing them
without thinking first.
MFC after: 3 weeks
table 'values' as IP addresses, use an explicit argument (-i).
This is a 'POLA' issue. This is a low risk change and should be MFC'd
to RELENG_6 and RELENG 7. it might be put as an errata item for 6.3.
(not sure about 6.2).
Fix suggested by: Eugene Grosbein
PR: 120720
MFC After: 3 days
exposing them to all consumers of ip_fw.h. These structures are
used in both ipfw(8) and ipfw(4), but not part of the user<->kernel
interface for other applications to use, rather, shared
implementation.
MFC after: 3 days
Reported by: Paul Vixie <paul at vix dot com>
- refer to the dummynet(4) man page only once, later use rather
the .Nm macro.
- use .Va macro when refering to the sysctl variables
- grammar and markup fixes
Reviewed by: keramida, trhodes, ru (roughly)
MFC-after: 1 week
If it is set to zero value (default) dummynet module will try to emulate
real link as close as possible (bandwidth & latency): packet will not leave
pipe faster than it should be on real link with given bandwidth.
(This is original behaviour of dummynet which was altered in previous commit)
If it is set to non-zero value only bandwidth is enforced: packet's latency
can be lower comparing to real link with given bandwidth.
- Document recently introduced dummynet(4) sysctl variables.
Requested by: luigi, julian
MFC after: 3 month
$ ipfw -n add 1 allow layer2 not mac-type ip
00001 allow ip from any to any layer2 not not mac-type 0x0800
PR: bin/115372
Submitted by: Andrey V. Elsukov
Approved by: re (hrs)
MFC after: 3 weeks
pack a set number correctly.
Submitted by: oleg
o Plug a memory leak.
Submitted by: oleg and Andrey V. Elsukov
Approved by: re (kensmith)
MFC after: 1 week
Also rename the related functions in a similar way.
There are no functional changes.
For a packet coming in with IPsec tunnel mode, the default is
to only call into the firewall with the "outer" IP header and
payload.
With this option turned on, in addition to the "outer" parts,
the "inner" IP header and payload are passed to the
firewall too when going through ip_input() the second time.
The option was never only related to a gif(4) tunnel within
an IPsec tunnel and thus the name was very misleading.
Discussed at: BSDCan 2007
Best new name suggested by: rwatson
Reviewed by: rwatson
Approved by: re (bmah)
- to show a specific set: ipfw set 3 show
- to delete rules from the set: ipfw set 9 delete 100 200 300
- to flush the set: ipfw set 4 flush
- to reset rules counters in the set: ipfw set 1 zero
PR: kern/113388
Submitted by: Andrey V. Elsukov
Approved by: re (kensmith)
MFC after: 6 weeks
Before:
$ ipfw -n add 100 count icmp from any to any mac-type 0x01
00100 count icmp 0x0001
$ ipfw -n add 100 count icmp from any to any mac any any
00100 count icmp MAC any any any
After:
$ ipfw -n add 100 count icmp from any to any mac-type 0x01
00100 count icmp from any to any mac-type 0x0001
$ ipfw -n add 100 count icmp from any to any mac any any
00100 count icmp from any to any MAC any any
PR: bin/112244
Submitted by: Andrey V. Elsukov
MFC after: 1 month
With the second (and last) part of my previous Summer of Code work, we get:
-ipfw's in kernel nat
-redirect_* and LSNAT support
General information about nat syntax and some examples are available
in the ipfw (8) man page. The redirect and LSNAT syntax are identical
to natd, so please refer to natd (8) man page.
To enable in kernel nat in rc.conf, two options were added:
o firewall_nat_enable: equivalent to natd_enable
o firewall_nat_interface: equivalent to natd_interface
Remember to set net.inet.ip.fw.one_pass to 0, if you want the packet
to continue being checked by the firewall ruleset after being
(de)aliased.
NOTA BENE: due to some problems with libalias architecture, in kernel
nat won't work with TSO enabled nic, thus you have to disable TSO via
ifconfig (ifconfig foo0 -tso).
Approved by: glebius (mentor)
address, to avoid confusing the users that a full address is
always required.
Submitted by: Josh Paetzel <josh@tcbug.org> (through freebsd-doc)
MFC after: 3 days
otherwise this command
ipfw add allow ipv6-icmp from any to 2002::1 icmp6types 1,2,128,129
turns into icmp6types 1,2,32,33,34,...94,95,128,129
PR: 102422 (part 1)
Submitted by: Andrey V. Elsukov <bu7cher at yandex.ru>
MFC after: 5 days
having trouble with the "me6" keyword. Also, we were using inet_pton on
the wrong variable in one place.
Reviewed by: mlaier (previous version of patch)
Obtained from: Sascha Blank (inet_pton change)
MFC after: 1 week
for example:
fwd tablearg ip from any to table(1)
where table 1 has entries of the form:
1.1.1.0/24 10.2.3.4
208.23.2.0/24 router2
This allows trivial implementation of a secondary routing table implemented
in the firewall layer.
I expect more work (under discussion with Glebius) to follow this to clean
up some of the messy parts of ipfw related to tables.
Reviewed by: Glebius
MFC after: 1 month
- 'tag' & 'untag' action parameters.
- 'tagged' & 'limit' rule options.
Rule examples:
pipe 1 tag tablearg ip from table(1) to any
allow ip from any to table(2) tagged tablearg
allow tcp from table(3) to any 25 setup limit src-addr tablearg
sbin/ipfw/ipfw2.c:
1) new macros
GET_UINT_ARG - support of 'tablearg' keyword, argument range checking.
PRINT_UINT_ARG - support of 'tablearg' keyword.
2) strtoport(): do not silently truncate/accept invalid port list expressions
like: '1,2-abc' or '1,2-3-4' or '1,2-3x4'. style(9) cleanup.
Approved by: glebius (mentor)
MFC after: 1 month
Since tags are kept while packet resides in kernelspace, it's possible to
use other kernel facilities (like netgraph nodes) for altering those tags.
Submitted by: Andrey Elsukov <bu7cher at yandex dot ru>
Submitted by: Vadim Goncharov <vadimnuclight at tpu dot ru>
Approved by: glebius (mentor)
Idea from: OpenBSD PF
MFC after: 1 month
