- sysctl dev.acpi_hp.0.verbose to toggle debug output
- A modification so this can deal with different array lengths
when reading the CMI BIOS - now it works ok on HP Compaq nx7300
as well.
- Change behaviour to query only max_instance-1 CMI BIOS instances,
because all HPs seen so far are broken in that respect
(or there is a fundamental misunderstanding on my side, possible
as well). This way a disturbing ACPI Error Field exceeds Buffer
message is avoided.
- New bit to set on dev.acpi_hp.0.cmi_detail (0x8) to
also query the highest guid instance of CMI bios
acpi_hp.4:
- Document dev.acpi_hp.0.verbose sysctl in man page
- Document new bit for dev.acpi_hp.0.cmi_detail
- Add a section to manpage about hardware that has been reported
to work ok
Submitted by: Michael Gmelin <freebsdusb at bindone.de>
Approved by: re (kib)
MFC after: 2 weeks
via cpuctl(4) driver. Two new CPUCTL_MSRSBIT and CPUCTL_MSRCBIT ioctl(2)
calls treat the data field of the argument struct passed as a mask
and set/clear bits of the MSR register according to the mask value.
- Allow user to perform atomic bitwise AND and OR operaions on MSR registers
via cpucontrol(8) utility. Two new operations ("&=" and "|=") have been
added. The first one applies bitwise AND operaion between the current
contents of the MSR register and the mask, and the second performs bitwise
OR. The argument can be optionally prefixed with "~" inversion operator.
This allows one to mimic the "clear bit" behavior by using the command
like this:
cpucontrol -m 0x10&=~0x02 # clear the second bit of TSC MSR
Inversion operator support in all modes (assignment, OR, AND).
Approved by: re (kib)
MFC after: 1 month
- Document different semantics for ACPI_WMI_PROVIDES_GUID_STRING_METHOD
acpi_wmi.c:
- Modify acpi_wmi_provides_guid_string_method to return absolut number of
instances known for the given GUID.
acpi_hp.c:
- sysctl dev.acpi_hp.0.verbose to toggle debug output
- A modification so this can deal with different array lengths
when reading the CMI BIOS - now it works ok on HP Compaq nx7300
as well.
- Change behaviour to query only max_instance-1 CMI BIOS instances,
because all HPs seen so far are broken in that respect
(or there is a fundamental misunderstanding on my side, possible
as well). This way a disturbing ACPI Error Field exceeds Buffer
message is avoided.
- New bit to set on dev.acpi_hp.0.cmi_detail (0x8) to
also query the highest guid instance of CMI bios
acpi_hp.4:
- Document dev.acpi_hp.0.verbose sysctl in man page
- Document new bit for dev.acpi_hp.0.cmi_detail
- Add a section to manpage about hardware that has been reported
to work ok
Submitted by: Michael Gmelin, freebsdusb at bindone.de
Approved by: re (kib)
MFC after: 2 weeks
based on the information at The Unix Historical Society web page
(http://www.tuhs.org/Unix_History). Where multiple sources differ,
retain all data. Prefer 2.79BSD to 2.7.9BSD, since the former is from
/LABEL form the actual release. Use the /LABEL date as in the TUHS
tables (the curious can read http://minnie.tuhs.org/Unix_History/2bsd
for all the conflicting date confusion if they want).
Approved by: re@
insisting on privileged port access.
Include /var/yp/Makefile.local if it exists and suggest using
it to override /var/yp/Makefile behaviour.
Approved by: re (kib)
MFC after: 3 weeks
Import if_epair(4), a virtual cross-over Ethernet-like interface pair.
Note these files are 1:1 from p4 and not yet connected to the build
not knowing about the new netisr interface.
Sponsored by: The FreeBSD Foundation
- update for getrlimit(2) manpage;
- support for setting RLIMIT_SWAP in login class;
- addition to the limits(1) and sh and csh limit-setting builtins;
- tuning(7) documentation on the sysctls controlling overcommit.
In collaboration with: pho
Reviewed by: alc
Approved by: re (kensmith)
* Driver for ACPI HP extra functionations, which required
ACPI WMI driver.
Submitted by: Michael <freebsdusb at bindone.de>
Approved by: re
MFC after: 2 weeks
Actually, as it did receive few tuning, the support is disabled by
default, but it can opt-in with the option ADAPTIVE_LOCKMGRS.
Due to the nature of lockmgrs, adaptive spinning needs to be
selectively enabled for any interested lockmgr.
The support is bi-directional, or, in other ways, it will work in both
cases if the lock is held in read or write way. In particular, the
read path is passible of further tunning using the sysctls
debug.lockmgr.retries and debug.lockmgr.loops . Ideally, such sysctls
should be axed or compiled out before release.
Addictionally note that adaptive spinning doesn't cope well with
LK_SLEEPFAIL. The reason is that many (and probabilly all) consumers
of LK_SLEEPFAIL are mainly interested in knowing if the interlock was
dropped or not in order to reacquire it and re-test initial conditions.
This directly interacts with adaptive spinning because lockmgr needs
to drop the interlock while spinning in order to avoid a deadlock
(further details in the comments inside the patch).
Final note: finding someone willing to help on tuning this with
relevant workloads would be either very important and appreciated.
Tested by: jeff, pho
Requested by: many
we were not able to change c_fmt without breaking these utilities. Since
ache fixed all known issues 8 years ago, now we make ko_KR more usable.
Better late than never...
queue was drained. It will never fire for a directly dispatched packet.
You will most likely never want to use this for any ordinary netisr usage
and you will never blame netisr in case you try to use it and it does
not work as expected.
Reviewed by: rwatson
in /etc/termcap:
VT100 spec indicates that passthrough printing can be enabled
by sending ESC[5i and disabled by sending ESC[4i These entries
should be listed as po and pf in /etc/termcap, but are absent.
See http://www.vt100.net/docs/vt102-ug/chapter5.html#S5.5.2.23
PR: conf/71549
Submitted by: Andrew Webster <andrew@pubnix.net>
MFC after: 1 week
Although the PR contains also the definitions of the Wyse 60, they
are not copied into it since there are already definition for them
in the termcap file since 1997.
Also, the PR didn't use the :tc=xxx: feature, so I've imploded them.
PR: conf/81882
Submitted by: Meister des Chaos <meister@netz00.com>
MFC after: 1 week
The termcap database does not have an entry for rxvt-unicode.
This means that programs that need an entry such as vi fail
to work when connecting via ssh using this terminal emulator.
The added data is not the same as the PR submitted by Richard, it
uses the :tc=xxx: option to inherit everything from rxvt-mono.
PR: conf/117323
Submitted by: Richard Bradshaw <richard.bradshaw@blueyonder.co.uk>
MFC after: 1 week
There is a minor typo in the cons25l7 (':' instead of '|') entry
in src/etc/termcap.small that causes syscons to complain about
bogus characters in /etc/termcap.db.
PR: conf/132777
Submitted by: Nikos Ntarmos <ntarmos@cs.uoi.gr>
MFC after: 1 week
and ja_JP.SJIS locale
The iswprint() function does not return non-zero if used for
some wide-character that it code was 0x824f-0x8258 on ja_JP.SJIS
and 0xa3b0-0xa3b9 on ja_JP.eucJP locale. But those are right
Japanese wide-character code.
PR: conf/124511
Submitted by: Michihiro NAKAJIMA <ggcueroad@gmail.com>
MFC after: 1 week
addition: danish syscons keymap with accents
There are two danish keymap files shipping with FreeBSD:
danish.iso.kbd and danish.cp865.kbd. None of these support
accents by use of dead keys, which isn't crucial to Danes but
often used. This is a new keymap, danish.iso.acc.kbd, that's
based on danish.iso.kbd with the accent part taken from
german.iso.acc.kbd.
pl_PL.dvorak keymap for syscons.
Polish dvorak keymap by Robert Sebastian Gerus (17:05 01-07-2006
CEST) <arachnist@gmail.com>. Based on pl_PL.ISO-8859-2 and
us.dvorak keymaps.
British English Dvorak keymap for syscons.
Attached is a Dvorak keymap for British English, with a
pound-sterling symbol on on Shift-3 and some other characters
in different places to the US Dvorak keymap. I've based the
layout on the X.org GB keymap, Dvorak variant.
PR: conf/72978, kern/99692, conf/117257
Submitted by: Kim Norgaard <jasen@jasen.dk>, Robert Sebastian Gerus <arachnist@gmail.com>, "Benjamin A'Lee" <bma@subvert.org.uk>
MFC after: 1 week
French translations for keyboards keymaps descriptions with
some corrections on existing translations in the
/usr/share/syscons/keymaps/INDEX.keymaps
PR: conf/71767
Submitted by: Henri Michelon <hmichelon@e-cml.org>
MFC after: 1 week
Without this patch /usr/share/locale/hr_HR.ISO8859-2/LC_COLLATE
is a link to the ../la_LN.ISO8859-2/LC_COLLATE. It means
that there is no support for Croatian locale.
PR: conf/120113
Submitted by: Simun Mikecin <numisemis@yahoo.com>
MFC after: 1 week
Catalan language is not only spoken in Spain (ca_ES), but also
in Andorra, France and Italy. In Andorra it is the official
language.
(see http://en.wikipedia.org/wiki/Catalan_language#Geographic_distribution)
Add a bunch of symlinks to between ca_ES and ca_AD, ca_FR and ca_IT.
PR: conf/92541
Submitted by: <rmh@io.debian.net>
MFC after: 1 week
