Commit Graph

483 Commits

Author SHA1 Message Date
Konstantin Belousov
9ded9474d3 Do not coalesce if the swap object belongs to tmpfs vnode. The
coalesce would extend the object to keep pages for the anonymous
mapping created by the process.  The pages has no relations to the
tmpfs file content which could be written into the corresponding
range, causing anonymous mapping and file content aliasing and
subsequent corruption.

Another lesser problem created by coalescing is over-accounting on the
tmpfs node destruction, since the object size is substracted from the
total count of the pages owned by the tmpfs mount.

Reported and tested by:	bdrewery
Sponsored by:	The FreeBSD Foundation
MFC after:	1 week
2013-11-05 06:18:50 +00:00
Konstantin Belousov
3aaea6efd5 Drain for the xbusy state for two places which potentially do
pmap_remove_all(). Not doing the drain allows the pmap_enter() to
proceed in parallel, making the pmap_remove_all() effects void.

The race results in an invalidated page mapped wired by usermode.

Reported and tested by:	pho
Reviewed by:	alc
Sponsored by:	The FreeBSD Foundation
Approved by:	re (glebius)
2013-09-08 17:51:22 +00:00
Konstantin Belousov
5944de8ecd Remove the deprecated VM_ALLOC_RETRY flag for the vm_page_grab(9).
The flag was mandatory since r209792, where vm_page_grab(9) was
changed to only support the alloc retry semantic.

Suggested and reviewed by:	alc
Sponsored by:	The FreeBSD Foundation
2013-08-22 07:39:53 +00:00
Attilio Rao
e946b94934 On all the architectures, avoid to preallocate the physical memory
for nodes used in vm_radix.
On architectures supporting direct mapping, also avoid to pre-allocate
the KVA for such nodes.

In order to do so make the operations derived from vm_radix_insert()
to fail and handle all the deriving failure of those.

vm_radix-wise introduce a new function called vm_radix_replace(),
which can replace a leaf node, already present, with a new one,
and take into account the possibility, during vm_radix_insert()
allocation, that the operations on the radix trie can recurse.
This means that if operations in vm_radix_insert() recursed
vm_radix_insert() will start from scratch again.

Sponsored by:	EMC / Isilon storage division
Reviewed by:	alc (older version)
Reviewed by:	jeff
Tested by:	pho, scottl
2013-08-09 11:28:55 +00:00
Attilio Rao
c7aebda8a1 The soft and hard busy mechanism rely on the vm object lock to work.
Unify the 2 concept into a real, minimal, sxlock where the shared
acquisition represent the soft busy and the exclusive acquisition
represent the hard busy.
The old VPO_WANTED mechanism becames the hard-path for this new lock
and it becomes per-page rather than per-object.
The vm_object lock becames an interlock for this functionality:
it can be held in both read or write mode.
However, if the vm_object lock is held in read mode while acquiring
or releasing the busy state, the thread owner cannot make any
assumption on the busy state unless it is also busying it.

Also:
- Add a new flag to directly shared busy pages while vm_page_alloc
  and vm_page_grab are being executed.  This will be very helpful
  once these functions happen under a read object lock.
- Move the swapping sleep into its own per-object flag

The KPI is heavilly changed this is why the version is bumped.
It is very likely that some VM ports users will need to change
their own code.

Sponsored by:	EMC / Isilon storage division
Discussed with:	alc
Reviewed by:	jeff, kib
Tested by:	gavin, bapt (older version)
Tested by:	pho, scottl
2013-08-09 11:11:11 +00:00
Jeff Roberson
5df87b21d3 Replace kernel virtual address space allocation with vmem. This provides
transparent layering and better fragmentation.

 - Normalize functions that allocate memory to use kmem_*
 - Those that allocate address space are named kva_*
 - Those that operate on maps are named kmap_*
 - Implement recursive allocation handling for kmem_arena in vmem.

Reviewed by:	alc
Tested by:	pho
Sponsored by:	EMC / Isilon Storage Division
2013-08-07 06:21:20 +00:00
Konstantin Belousov
ebf5d94e82 Never remove user-wired pages from an object when doing
msync(MS_INVALIDATE).  The vm_fault_copy_entry() requires that object
range which corresponds to the user-wired vm_map_entry, is always
fully populated.

Add OBJPR_NOTWIRED flag for vm_object_page_remove() to request the
preserving behaviour, use it when calling vm_object_page_remove() from
vm_object_sync().

Reported and tested by:	pho
Reviewed by:	alc
Sponsored by:	The FreeBSD Foundation
MFC after:	2 weeks
2013-07-11 05:47:26 +00:00
Jeff Roberson
5f51836645 - Add a general purpose resource allocator, vmem, from NetBSD. It was
originally inspired by the Solaris vmem detailed in the proceedings
   of usenix 2001.  The NetBSD version was heavily refactored for bugs
   and simplicity.
 - Use this resource allocator to allocate the buffer and transient maps.
   Buffer cache defrags are reduced by 25% when used by filesystems with
   mixed block sizes.  Ultimately this may permit dynamic buffer cache
   sizing on low KVA machines.

Discussed with:	alc, kib, attilio
Tested by:	pho
Sponsored by:	EMC / Isilon Storage Division
2013-06-28 03:51:20 +00:00
Alan Cox
2051980f97 Revise the interface between vm_object_madvise() and vm_page_dontneed() so
that pointless calls to pmap_is_modified() can be easily avoided when
performing madvise(..., MADV_FREE).

Sponsored by:	EMC / Isilon Storage Division
2013-06-10 01:48:21 +00:00
Attilio Rao
dfd55c0c7b In vm_object_split(), busy and consequently unbusy the pages only when
swap_pager_copy() is invoked, otherwise there is no reason to do so.
This will eliminate the necessity to busy pages most of the times.

Sponsored by:	EMC / Isilon storage division
Reviewed by:	alc
2013-06-04 22:47:01 +00:00
Konstantin Belousov
7560005c41 After the object lock was dropped, the object' reference count could
change.  Retest the ref_count and return from the function to not
execute the further code which assumes that ref_count == 1 if it is
not.  Also, do not leak vnode lock if other thread cleared OBJ_TMPFS
flag meantime.

Reported by:	bdrewery
Tested by:	bdrewery, pho
Sponsored by:	The FreeBSD Foundation
2013-05-30 20:00:19 +00:00
Konstantin Belousov
782d4a636b Remove the capitalization in the assertion message. Print the address
of the object to get useful information from optimizated kernels dump.
2013-05-30 19:53:31 +00:00
Konstantin Belousov
6f2af3fcf3 Rework the handling of the tmpfs node backing swap object and tmpfs
vnode v_object to avoid double-buffering.  Use the same object both as
the backing store for tmpfs node and as the v_object.

Besides reducing memory use up to 2x times for situation of mapping
files from tmpfs, it also makes tmpfs read and write operations copy
twice bytes less.

VM subsystem was already slightly adapted to tolerate OBJT_SWAP object
as v_object. Now the vm_object_deallocate() is modified to not
reinstantiate OBJ_ONEMAPPING flag and help the VFS to correctly handle
VV_TEXT flag on the last dereference of the tmpfs backing object.

Reviewed by:	alc
Tested by:	pho, bf
MFC after:	1 month
2013-04-28 19:38:59 +00:00
Konstantin Belousov
e5f299ff76 Make vm_object_page_clean() and vm_mmap_vnode() tolerate the vnode'
v_object of non OBJT_VNODE type.

For vm_object_page_clean(), simply do not assert that object type must
be OBJT_VNODE, and add a comment explaining how the check for
OBJ_MIGHTBEDIRTY prevents the rest of function from operating on such
objects.

For vm_mmap_vnode(), if the object type is not OBJT_VNODE, require it
to be for swap pager (or default), handle the bypass filesystems, and
correctly acquire the object reference in this case.

Reviewed by:	alc
Tested by:	pho, bf
MFC after:	1 week
2013-04-28 19:25:09 +00:00
Attilio Rao
774d251d99 Sync back vmcontention branch into HEAD:
Replace the per-object resident and cached pages splay tree with a
path-compressed multi-digit radix trie.
Along with this, switch also the x86-specific handling of idle page
tables to using the radix trie.

This change is supposed to do the following:
- Allowing the acquisition of read locking for lookup operations of the
  resident/cached pages collections as the per-vm_page_t splay iterators
  are now removed.
- Increase the scalability of the operations on the page collections.

The radix trie does rely on the consumers locking to ensure atomicity of
its operations.  In order to avoid deadlocks the bisection nodes are
pre-allocated in the UMA zone.  This can be done safely because the
algorithm needs at maximum one new node per insert which means the
maximum number of the desired nodes is the number of available physical
frames themselves.  However, not all the times a new bisection node is
really needed.

The radix trie implements path-compression because UFS indirect blocks
can lead to several objects with a very sparse trie, increasing the number
of levels to usually scan.  It also helps in the nodes pre-fetching by
introducing the single node per-insert property.

This code is not generalized (yet) because of the possible loss of
performance by having much of the sizes in play configurable.
However, efforts to make this code more general and then reusable in
further different consumers might be really done.

The only KPI change is the removal of the function vm_page_splay() which
is now reaped.
The only KBI change, instead, is the removal of the left/right iterators
from struct vm_page, which are now reaped.

Further technical notes broken into mealpieces can be retrieved from the
svn branch:
http://svn.freebsd.org/base/user/attilio/vmcontention/

Sponsored by:	EMC / Isilon storage division
In collaboration with:	alc, jeff
Tested by:	flo, pho, jhb, davide
Tested by:	ian (arm)
Tested by:	andreast (powerpc)
2013-03-18 00:25:02 +00:00
Attilio Rao
89f6b8632c Switch the vm_object mutex to be a rwlock. This will enable in the
future further optimizations where the vm_object lock will be held
in read mode most of the time the page cache resident pool of pages
are accessed for reading purposes.

The change is mostly mechanical but few notes are reported:
* The KPI changes as follow:
  - VM_OBJECT_LOCK() -> VM_OBJECT_WLOCK()
  - VM_OBJECT_TRYLOCK() -> VM_OBJECT_TRYWLOCK()
  - VM_OBJECT_UNLOCK() -> VM_OBJECT_WUNLOCK()
  - VM_OBJECT_LOCK_ASSERT(MA_OWNED) -> VM_OBJECT_ASSERT_WLOCKED()
    (in order to avoid visibility of implementation details)
  - The read-mode operations are added:
    VM_OBJECT_RLOCK(), VM_OBJECT_TRYRLOCK(), VM_OBJECT_RUNLOCK(),
    VM_OBJECT_ASSERT_RLOCKED(), VM_OBJECT_ASSERT_LOCKED()
* The vm/vm_pager.h namespace pollution avoidance (forcing requiring
  sys/mutex.h in consumers directly to cater its inlining functions
  using VM_OBJECT_LOCK()) imposes that all the vm/vm_pager.h
  consumers now must include also sys/rwlock.h.
* zfs requires a quite convoluted fix to include FreeBSD rwlocks into
  the compat layer because the name clash between FreeBSD and solaris
  versions must be avoided.
  At this purpose zfs redefines the vm_object locking functions
  directly, isolating the FreeBSD components in specific compat stubs.

The KPI results heavilly broken by this commit.  Thirdy part ports must
be updated accordingly (I can think off-hand of VirtualBox, for example).

Sponsored by:	EMC / Isilon storage division
Reviewed by:	jeff
Reviewed by:	pjd (ZFS specific review)
Discussed with:	alc
Tested by:	pho
2013-03-09 02:32:23 +00:00
Attilio Rao
c934116100 Merge from vmc-playground:
Introduce a new KPI that verifies if the page cache is empty for a
specified vm_object.  This KPI does not make assumptions about the
locking in order to be used also for building assertions at init and
destroy time.
It is mostly used to hide implementation details of the page cache.

Sponsored by:	EMC / Isilon storage division
Reviewed by:	jeff
Reviewed by:	alc (vm_radix based version)
Tested by:	flo, pho, jhb, davide
2013-03-09 02:05:29 +00:00
Attilio Rao
198da1b2fa Merge from vmcontention:
As vm objects are type-stable there is no need to initialize the
resident splay tree pointer and the cache splay tree pointer in
_vm_object_allocate() but this could be done in the init UMA zone
handler.

The destructor UMA zone handler, will further check if the condition is
retained at every destruction and catch for bugs.

Sponsored by:	EMC / Isilon storage division
Submitted by:	alc
2013-03-04 13:10:59 +00:00
Alan Cox
55f33f2caf The value held by the vm object's field pg_color is only considered
valid if the flag OBJ_COLORED is set.  Since _vm_object_allocate()
doesn't set this flag, it needn't initialize pg_color.

Sponsored by:	EMC / Isilon Storage Division
2013-03-02 18:07:29 +00:00
Attilio Rao
a4915c21d9 Merge from vmc-playground branch:
Replace the sub-optimal uma_zone_set_obj() primitive with more modern
uma_zone_reserve_kva().  The new primitive reserves before hand
the necessary KVA space to cater the zone allocations and allocates pages
with ALLOC_NOOBJ.  More specifically:
- uma_zone_reserve_kva() does not need an object to cater the backend
  allocator.
- uma_zone_reserve_kva() can cater M_WAITOK requests, in order to
  serve zones which need to do uma_prealloc() too.
- When possible, uma_zone_reserve_kva() uses directly the direct-mapping
  by uma_small_alloc() rather than relying on the KVA / offset
  combination.

The removal of the object attribute allows 2 further changes:
1) _vm_object_allocate() becomes static within vm_object.c
2) VM_OBJECT_LOCK_INIT() is removed.  This function is replaced by
   direct calls to mtx_init() as there is no need to export it anymore
   and the calls aren't either homogeneous anymore: there are now small
   differences between arguments passed to mtx_init().

Sponsored by:	EMC / Isilon storage division
Reviewed by:	alc (which also offered almost all the comments)
Tested by:	pho, jhb, davide
2013-02-26 23:35:27 +00:00
Attilio Rao
64a3476f0c Remove white spaces.
Sponsored by:	EMC / Isilon storage division
2013-02-26 20:35:40 +00:00
Attilio Rao
0dde287b20 Wrap the sleeps synchronized by the vm_object lock into the specific
macro VM_OBJECT_SLEEP().
This hides some implementation details like the usage of the msleep()
primitive and the necessity to access to the lock address directly.
For this reason VM_OBJECT_MTX() macro is now retired.

Sponsored by:	EMC / Isilon storage division
Reviewed by:	alc
Tested by:	pho
2013-02-26 17:22:08 +00:00
Alan Cox
2863482058 In the past four years, we've added two new vm object types. Each time,
similar changes had to be made in various places throughout the machine-
independent virtual memory layer to support the new vm object type.
However, in most of these places, it's actually not the type of the vm
object that matters to us but instead certain attributes of its pages.
For example, OBJT_DEVICE, OBJT_MGTDEVICE, and OBJT_SG objects contain
fictitious pages.  In other words, in most of these places, we were
testing the vm object's type to determine if it contained fictitious (or
unmanaged) pages.

To both simplify the code in these places and make the addition of future
vm object types easier, this change introduces two new vm object flags
that describe attributes of the vm object's pages, specifically, whether
they are fictitious or unmanaged.

Reviewed and tested by:	kib
2012-12-09 00:32:38 +00:00
Alan Cox
96b0b92ac1 Add support for the (relatively) new object type OBJT_MGTDEVICE to
vm_object_set_memattr().  Also, add a "safety belt" so that
vm_object_set_memattr() doesn't silently modify undefined object types.

Reviewed by:	kib
MFC after:	10 days
2012-11-28 18:29:34 +00:00
Konstantin Belousov
5050aa86cf Remove the support for using non-mpsafe filesystem modules.
In particular, do not lock Giant conditionally when calling into the
filesystem module, remove the VFS_LOCK_GIANT() and related
macros. Stop handling buffers belonging to non-mpsafe filesystems.

The VFS_VERSION is bumped to indicate the interface change which does
not result in the interface signatures changes.

Conducted and reviewed by:	attilio
Tested by:	pho
2012-10-22 17:50:54 +00:00
Alan Cox
9af47af64a Eliminate the conditional for releasing the page queues lock in
vm_page_sleep().  vm_page_sleep() is no longer called with this lock
held.

Eliminate assertions that the page queues lock is NOT held.  These
assertions won't translate well to having distinct locks on the active
and inactive page queues, and they really aren't that useful.

MFC after:	3 weeks
2012-10-13 18:46:46 +00:00
Konstantin Belousov
877d24ac8a Fix the mis-handling of the VV_TEXT on the nullfs vnodes.
If you have a binary on a filesystem which is also mounted over by
nullfs, you could execute the binary from the lower filesystem, or
from the nullfs mount. When executed from lower filesystem, the lower
vnode gets VV_TEXT flag set, and the file cannot be modified while the
binary is active. But, if executed as the nullfs alias, only the
nullfs vnode gets VV_TEXT set, and you still can open the lower vnode
for write.

Add a set of VOPs for the VV_TEXT query, set and clear operations,
which are correctly bypassed to lower vnode.

Tested by:	pho (previous version)
MFC after:	2 weeks
2012-09-28 11:25:02 +00:00
Konstantin Belousov
5f9c767b19 Plug the accounting leak for the wired pages when msync(MS_INVALIDATE)
is performed on the vnode mapping which is wired in other address space.

While there, explicitely assert that the page is unwired and zero the
wire_count instead of substract. The condition is rechecked later in
vm_page_free(_toq) already.

Reported and tested by:	zont
Reviewed by:	alc (previous version)
MFC after:	1 week
2012-09-20 09:52:57 +00:00
Attilio Rao
571a1e92aa Document the object type movements, related to swp_pager_copy(),
in vm_object_collapse() and vm_object_split().

In collabouration with:	alc
MFC after:	3 days
2012-07-11 01:04:59 +00:00
John Baldwin
92a5994685 Fix madvise(MADV_WILLNEED) to properly handle individual mappings larger
than 4GB.  Specifically, the inlined version of 'ptoa' of the the 'int'
count of pages overflowed on 64-bit platforms.  While here, change
vm_object_madvise() to accept two vm_pindex_t parameters (start and end)
rather than a (start, count) tuple to match other VM APIs as suggested
by alc@.
2012-03-19 18:47:34 +00:00
Konstantin Belousov
126d60823a In vm_object_page_clean(), do not clean OBJ_MIGHTBEDIRTY object flag
if the filesystem performed short write and we are skipping the page
due to this.

Propogate write error from the pager back to the callers of
vm_pageout_flush().  Report the failure to write a page from the
requested range as the FALSE return value from vm_object_page_clean(),
and propagate it back to msync(2) to return EIO to usermode.

While there, convert the clearobjflags variable in the
vm_object_page_clean() and arguments of the helper functions to
boolean.

PR:	kern/165927
Reviewed by:	alc
MFC after:	2 weeks
2012-03-17 23:00:32 +00:00
Konstantin Belousov
e65919f9fc Do not restart the scan in vm_object_page_clean() on the object
generation change if requested mode is async. The object generation is
only changed when the object is marked as OBJ_MIGHTBEDIRTY. For async
mode it is enough to write each dirty page, not to make a guarantee that
all pages are cleared after the vm_object_page_clean() returned.

Diagnosed by:	truckman
Tested by:	flo
Reviewed by:	alc, truckman
MFC after:	2 weeks
2012-01-04 16:04:20 +00:00
Alan Cox
b5f359b7c3 Optimize vm_object_split()'s handling of reservations. 2011-12-28 20:27:18 +00:00
Konstantin Belousov
75ff604a78 Optimize the common case of msyncing the whole file mapping with
MS_SYNC flag. The system must guarantee that all writes are finished
before syscalls returned. Schedule the writes in async mode, which is
much faster and allows the clustering to occur. Wait for writes using
VOP_FSYNC(), since we are syncing the whole file mapping.

Potentially, the restriction to only apply the optimization can be
relaxed by not requiring that the mapping cover whole file, as it is
done by other OSes.

Reported and tested by:	 az
Reviewed by: alc
MFC after:   2 weeks
2011-12-23 09:09:42 +00:00
Ed Schouten
6472ac3d8a Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs.
The SYSCTL_NODE macro defines a list that stores all child-elements of
that node. If there's no SYSCTL_DECL macro anywhere else, there's no
reason why it shouldn't be static.
2011-11-07 15:43:11 +00:00
John Baldwin
936c09ac0f Add the posix_fadvise(2) system call. It is somewhat similar to
madvise(2) except that it operates on a file descriptor instead of a
memory region.  It is currently only supported on regular files.

Just as with madvise(2), the advice given to posix_fadvise(2) can be
divided into two types.  The first type provide hints about data access
patterns and are used in the file read and write routines to modify the
I/O flags passed down to VOP_READ() and VOP_WRITE().  These modes are
thus filesystem independent.  Note that to ease implementation (and
since this API is only advisory anyway), only a single non-normal
range is allowed per file descriptor.

The second type of hints are used to hint to the OS that data will or
will not be used.  These hints are implemented via a new VOP_ADVISE().
A default implementation is provided which does nothing for the WILLNEED
request and attempts to move any clean pages to the cache page queue for
the DONTNEED request.  This latter case required two other changes.
First, a new V_CLEANONLY flag was added to vinvalbuf().  This requests
vinvalbuf() to only flush clean buffers for the vnode from the buffer
cache and to not remove any backing pages from the vnode.  This is
used to ensure clean pages are not wired into the buffer cache before
attempting to move them to the cache page queue.  The second change adds
a new vm_object_page_cache() method.  This method is somewhat similar to
vm_object_page_remove() except that instead of freeing each page in the
specified range, it attempts to move clean pages to the cache queue if
possible.

To preserve the ABI of struct file, the f_cdevpriv pointer is now reused
in a union to point to the currently active advice region if one is
present for regular files.

Reviewed by:	jilles, kib, arch@
Approved by:	re (kib)
MFC after:	1 month
2011-11-04 04:02:50 +00:00
Konstantin Belousov
3407fefef6 Split the vm_page flags PG_WRITEABLE and PG_REFERENCED into atomic
flags field. Updates to the atomic flags are performed using the atomic
ops on the containing word, do not require any vm lock to be held, and
are non-blocking. The vm_page_aflag_set(9) and vm_page_aflag_clear(9)
functions are provided to modify afalgs.

Document the changes to flags field to only require the page lock.

Introduce vm_page_reference(9) function to provide a stable KPI and
KBI for filesystems like tmpfs and zfs which need to mark a page as
referenced.

Reviewed by:    alc, attilio
Tested by:      marius, flo (sparc64); andreast (powerpc, powerpc64)
Approved by:	re (bz)
2011-09-06 10:30:11 +00:00
Konstantin Belousov
d98d0ce27a - Move the PG_UNMANAGED flag from m->flags to m->oflags, renaming the flag
to VPO_UNMANAGED (and also making the flag protected by the vm object
  lock, instead of vm page queue lock).
- Mark the fake pages with both PG_FICTITIOUS (as it is now) and
  VPO_UNMANAGED. As a consequence, pmap code now can use use just
  VPO_UNMANAGED to decide whether the page is unmanaged.

Reviewed by:	alc
Tested by:	pho (x86, previous version), marius (sparc64),
    marcel (arm, ia64, powerpc), ray (mips)
Sponsored by:	The FreeBSD Foundation
Approved by:	re (bz)
2011-08-09 21:01:36 +00:00
Alan Cox
6bbee8e28a Add a new option, OBJPR_NOTMAPPED, to vm_object_page_remove(). Passing this
option to vm_object_page_remove() asserts that the specified range of pages
is not mapped, or more precisely that none of these pages have any managed
mappings.  Thus, vm_object_page_remove() need not call pmap_remove_all() on
the pages.

This change not only saves time by eliminating pointless calls to
pmap_remove_all(), but it also eliminates an inconsistency in the use of
pmap_remove_all() versus related functions, like pmap_remove_write().  It
eliminates harmless but pointless calls to pmap_remove_all() that were being
performed on PG_UNMANAGED pages.

Update all of the existing assertions on pmap_remove_all() to reflect this
change.

Reviewed by:	kib
2011-06-29 16:40:41 +00:00
Konstantin Belousov
031ec8c10a In the VOP_PUTPAGES() implementations, change the default error from
VM_PAGER_AGAIN to VM_PAGER_ERROR for the uwritten pages. Return
VM_PAGER_AGAIN for the partially written page. Always forward at least
one page in the loop of vm_object_page_clean().

VM_PAGER_ERROR causes the page reactivation and does not clear the
page dirty state, so the write is not lost.

The change fixes an infinite loop in vm_object_page_clean() when the
filesystem returns permanent errors for some page writes.

Reported and tested by:	gavin
Reviewed by:	alc, rmacklem
MFC after:	1 week
2011-06-01 21:00:28 +00:00
Max Laier
e18cc7bf3e Another long standing vm bug found at Isilon:
Fix a race between vm_object_collapse and vm_fault.

Reviewed by:	alc@
MFC after:	3 days
2011-05-09 20:27:49 +00:00
Konstantin Belousov
86769ac0a4 Fix two bugs in r218670.
Hold the vnode around the region where object lock is dropped, until
vnode lock is acquired.

Do not drop the vnode reference for a case when the object was
deallocated during unlock. Note that in this case, VV_TEXT is cleared
by vnode_pager_dealloc().

Reported and tested by:	pho
Reviewed by:	alc
MFC after:	3 days
2011-04-23 21:38:21 +00:00
Konstantin Belousov
03fa5b34a0 Lock the vnode around clearing of VV_TEXT flag. Remove mp_fixme() note
mentioning that vnode lock is needed.

Reviewed by:	alc
Tested by:	pho
MFC after:	1 week
2011-02-13 21:52:26 +00:00
Alan Cox
17f3095d1a Unless "cnt" exceeds MAX_COMMIT_COUNT, nfsrv_commit() and nfsvno_fsync() are
incorrectly calling vm_object_page_clean().  They are passing the length of
the range rather than the ending offset of the range.

Perform the OFF_TO_IDX() conversion in vm_object_page_clean() rather than the
callers.

Reviewed by:	kib
MFC after:	3 weeks
2011-02-05 21:21:27 +00:00
Alan Cox
0cc74f144e Since the last parameter to vm_object_shadow() is a vm_size_t and not a
vm_pindex_t, it makes no sense for its callers to perform atop().  Let
vm_object_shadow() do that instead.
2011-02-04 21:49:24 +00:00
Konstantin Belousov
c6c9025b65 For consistency, use kernel_object instead of &kernel_object_store
when initializing the object mutex. Do the same for kmem_object.

Discussed with:	alc
MFC after:	1 week
2011-01-15 21:56:38 +00:00
Alan Cox
edf93b25d3 Make a couple refinements to r216799 and r216810. In particular, revise
a comment and move it to its proper place.

Reviewed by:	kib
2011-01-01 17:39:38 +00:00
Konstantin Belousov
50cfe7fa50 Remove OBJ_CLEANING flag. The vfs_setdirty_locked_object() is the only
consumer of the flag, and it used the flag because OBJ_MIGHTBEDIRTY
was cleared early in vm_object_page_clean, before the cleaning pass
was done. This is no longer true after r216799.

 Moreover, since OBJ_CLEANING is a flag, and not the counter, it could
be reset too prematurely when parallel vm_object_page_clean() are
performed.

Reviewed by:	alc (as a part of the bigger patch)
MFC after:	1 month (after r216799 is merged)
2010-12-29 22:26:49 +00:00
Konstantin Belousov
3280870dca Move the increment of vm object generation count into
vm_object_set_writeable_dirty().

Fix an issue where restart of the scan in vm_object_page_clean() did
not removed write permissions for newly added pages or, if the mapping
for some already scanned page changed to writeable due to fault.
Merge the two loops in vm_object_page_clean(), doing the remove of
write permission and cleaning in the same loop. The restart of the
loop then correctly downgrade writeable mappings.

Fix an issue where a second caller to msync() might actually return
before the first caller had actually completed flushing the
pages. Clear the OBJ_MIGHTBEDIRTY flag after the cleaning loop, not
before.

Calls to pmap_is_modified() are not needed after pmap_remove_write()
there.

Proposed, reviewed and tested by:	alc
MFC after:	1 week
2010-12-29 12:53:53 +00:00
Edward Tomasz Napierala
ef694c1ac4 Replace pointer to "struct uidinfo" with pointer to "struct ucred"
in "struct vm_object".  This is required to make it possible to account
for per-jail swap usage.

Reviewed by:	kib@
Tested by:	pho@
Sponsored by:	FreeBSD Foundation
2010-12-02 17:37:16 +00:00