Commit Graph

17 Commits

Author SHA1 Message Date
John Baldwin
2067d312d4 Add locking to ppc and ppbus and mark the whole lot MPSAFE:
- To avoid having a bunch of locks that end up always getting acquired as
  a group, give each ppc(4) device a mutex which it shares with all the
  child devices including ppbus(4), lpt(4), plip(4), etc.  This mutex
  is then used for all the locking.
- Rework the interrupt handling stuff yet again.  Now ppbus drivers setup
  their interrupt handler during attach and tear it down during detach
  like most other drivers.  ppbus(4) only invokes the interrupt handler
  of the device that currently owns the bus (if any) when an interrupt
  occurs, however.  Also, interrupt handlers in general now accept their
  softc pointers as their argument rather than the device_t.  Another
  feature of the ppbus interrupt handlers is that they are called with
  the parent ppc device's lock already held.  This minimizes the number
  of lock operations during an interrupt.
- Mark plip(4), lpt(4), pcfclock(4), ppi(4), vpo(4) MPSAFE.
- lpbb(4) uses the ppc lock instead of Giant.
- Other plip(4) changes:
  - Add a mutex to protect the global tables in plip(4) and free them on
    module unload.
  - Add a detach routine.
  - Split out the init/stop code from the ioctl routine into separate
    functions.
- Other lpt(4) changes:
  - Use device_printf().
  - Use a dedicated callout for the lptout timer.
  - Allocate the I/O buffers at attach and detach rather than during
    open and close as this simplifies the locking at the cost of
    1024+32 bytes when the driver is attached.
- Other ppi(4) changes:
  - Use an sx lock to serialize open and close.
  - Remove unused HADBUS flag.
  - Add a detach routine.
  - Use a malloc'd buffer for each read and write to avoid races with
    concurrent read/write.
- Other pps(4) changes:
  - Use a callout rather than a callout handle with timeout().
  - Conform to the new ppbus requirements (regular mutex, non-filter
    interrupt handler).  pps(4) is probably going to have to become a
    standalone driver that doesn't use ppbus(4) to satisfy it's
    requirements for low latency as a result.
  - Use an sx lock to serialize open and close.
- Other vpo(4) changes:
  - Use the parent ppc device's lock to create the CAM sim instead of
    Giant.
- Other ppc(4) changes:
  - Fix ppc_isa's detach method to detach instead of calling attach.

Tested by:	  no one :-(
2009-01-21 23:10:06 +00:00
John Baldwin
284c87f60e Various whitespace and style fixes. 2008-11-16 17:42:02 +00:00
John Baldwin
ae6b868a2a Several cleanups to remove the need for explicit unit numbers and a few
other fixes:
- Add pointers back to device_t objects in softc structures instead
  of storing the unit and using devclass_get_device().
- Add 'lpbb', 'pcf', 'pps', and 'vpo' child devices to every 'ppbus' device
  instead of just the first one.
- Store softc pointers in si_drv1 of character devices instead of
  pulling the unit number from the minor number and using
  devclass_get_softc() and devclass_get_device().
- Store the LP_BYPASS flag in si_drv2 instead of encoding it in the minor
  number.
- Destroy character devices for lpt(4) when detaching the device.
- Use bus_print_child_footer() instead of duplicating it in
  ppbus_print_child() and fix ppbus_print_child()'s return value.
- Remove unused AVM ivar from ppbus.
- Don't store the 'mode' ivar in the ppbus ivars since we always fetch it
  from the parent anyway.
- Try to detach all the child devices before deleting them in
  ppbus_detach().
- Use pause() instead of a tsleep() on a dummy address when polling the
  ppbus.
- Use if_printf() and device_printf() instead of explicit names with unit
  numbers.

Silence on:	current@
2008-10-21 18:30:10 +00:00
David E. O'Brien
aad970f1fe Use __FBSDID().
Also some minor style cleanups.
2003-08-24 17:55:58 +00:00
Warner Losh
51d3b6d1cc Define a module version. 2003-08-22 06:28:45 +00:00
Poul-Henning Kamp
db7e3af111 Remove unneeded #include <machine/clock.h> 2000-10-15 14:19:01 +00:00
Nick Hibma
677cec5b04 Fix the detection of parallel port Zip drives.
Submitted by:	j mckitrick <jcm@freebsd-uk.eu.org>
Reviewed by:	nsouchu
2000-07-18 20:16:16 +00:00
Nicolas Souchu
0f210c922b Port of ppbus standalone framework to the newbus system.
Note1: the correct interrupt level is invoked correctly for each driver.
       For this purpose, drivers request the bus before being able to
       call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus
       core when drivers release it. Thus, when BUS_SETUP_INTR is called
       at ppbus driver level, ppbus checks that the caller owns the
       bus and stores the interrupt handler cookie (in order to unregister
       it later).

       Printing is impossible while plip link is up is still TRUE.
       vpo (ZIP driver) and lpt are make in such a way that
       using the ZIP and printing concurrently is permitted is also TRUE.

Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET
       is now needed to force chipset detection. If set, the flags 0x40
       still avoid detection at boot.

Port of the pcf(4) driver to the newbus system (was previously directly
connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
Poul-Henning Kamp
fca3f34ff8 Passing the unit number to an interrupt routing is kind of narrowminded,
add a way to get the entire struct ppb_device back.
1999-08-08 22:25:21 +00:00
Matthew Dillon
b4e36adf1c Fix warnings preparing for -Wall -Wcast-qual
Also disable one usb module in LINT due to fatal compilation errors,
    temporary.
1999-01-27 20:09:21 +00:00
Nicolas Souchu
bc35c17446 Major ppbus commit with:
+ ECP parallel port chipset FIFO detection
	+ DMA+FIFO parallel I/O handled as chipset specific
	+ nlpt updated in order to use the above enhanced parallel I/O.
	  Use 'lptcontrol -e' to use enhanced I/O
	+ Various options documented in LINT
	+ Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for
	  an overview of the IEEE1284 standard
	+ Detection of PnP parallel devices at boot
	+ Read capability added to nlpt driver to get IEEE1284 compliant
	  printer status with a simple 'cat /dev/lpt0'
	+ IEEE1284 peripheral emulation added to BYTE mode. Two computers
	  may dialog according to IEEE1284 signaling method.
	  See PERIPH_1284 option and /sys/dev/ppbus/ppi.c

All this code is supposed to provide basic functions for IEEE1284 programming.
ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
Nicolas Souchu
24ef1eb143 ppbus enhanced to support ZIP+ : 1284 code added, microseq improved +
some bugs corrected in vpoio.
1998-09-13 18:26:26 +00:00
Mike Smith
46f3ff7986 Major ppbus updates from the author.
- ppbus now supports PLIP via the if_plip driver
 - ieee1284 infrastructure added, including parallel-port PnP
 - port microsequencer added, for scripting the sort of port I/O
   that is common with parallel devices without endless calls up and down
   through the driver structure.
 - improved bus ownership behaviour among the ppbus-using drivers.
 - improved I/O chipset feature detection

The vpo driver is now implemented using the microsequencer, leading to
some performance improvements as well as providing an extensive example
of its use.

Reviewed by:	msmith
Submitted by:	Nicolas Souchu <Nicolas.Souchu@prism.uvsq.fr>
1998-08-03 19:14:33 +00:00
Bruce Evans
0ff12406c3 Removed unused #includes. The !KERNEL case may be more broken than before. 1997-09-01 00:51:52 +00:00
Mike Smith
1e505cea7d Remove bogus i386/* includes. 1997-08-28 10:15:20 +00:00
Mike Smith
e51b0386a6 Sync with ppbus-970815 from the author :
- interrupt-driven printing now works (nlpt)
 - Rearrangement of bus-related functions into ppb_base/ppbconf
 - Addition of ieee1284 interface functions, preliminary parallel-port
   PnP support

Submitted by:	Nicolas Souchu <Nicolas.Souchu@prism.uvsq.fr>
1997-08-16 14:05:38 +00:00