DST should not need to worry about scheduling jobs when the DST time
changes.
Rather than removing the BUGS section in crontab(5) regarding this,
note that disabling '-s' may still cause jobs to be executed twice or
not at all.
PR: 166318
Submitted by: Florian k Unglaub (f.unglaub%googlemail!com)
MFC After: 1 week
WITHOUT_OPENSSL build by using the wpa's internal crypto support if
openssl is not available, this allows us to unconditionally enable
EAP support.
MFC after: 2 weeks
- eap_xxx.c files have been renamed to eap_server_xxx.c
- additional crypto files are required for some options
- EAP_MD5 and EAP_GTC is now enabled by default to match vendor config
- move each file on its own line to hopefully make further diffs easier
to read
EAP_SERVER is now enabled by default. Fiddling with HOSTAPD_CFLAGS in
src.conf is no longer required to get a basic WPA-EAP/radius setup
running.
Tested by: Johann Hugo <jhugo at meraka.csir.co.za>
MFC after: 2 weeks
- more style(9) fixes
- some refactoring
- better error detection
- Add the DPADD to Makefile
Submitted by: Garrett Cooper <yanegomi@gmail.com>
Approved by: des (mentor)
it respects PACKAGESITE, PACKAGEROOT, and a new environment variable ABI (if a user want to use a different API from the base one for its packages)
it has no man page on purpose to avoid hidding the pkg(8) man page from the pkgng package.
for now uses pkgbeta.FreeBSD.org as default mirror to find its package
it respects MK_PKGTOOLS
Approved by: des (mentor)
int (*compar)(const struct dirent **, const struct dirent **)
The current code defines sortq() to accept two void *, then cast them
to const struct dirent **. Because the code does not really need this
cast, we can eliminate the casts by changing the function prototype
to match scandir(3) expectation.
MFC after: 1 month
quotation. Also make sure we have the same amount of columns in each row as
the number of columns we specify in the head arguments.
Reviewed by: brueffer
- Fill the needed pmPartStatus flags. At least the OpenBIOS
implementation relies on these flags.
This commit fixes the panic seen on OS-X when inserting a FreeBSD/ppc disc.
Additionally OpenBIOS recognizes the partition where the boot code is located.
This lets us load a FreeBSD/ppc PowerMac kernel inside qemu.
PR: powerpc/162091
MFC after: 1 week
about to add, and failed if it exist and had invalid data
link type.
Later on, in r201282, this check morphed to other code, but
message "proxy entry exists for non 802 device" still left,
and now it is printed in a case if route prefix found is
equal to current address being added. In other words, when
we are trying to add ARP entry for a network address. The
message is absolutely unrelated and disappointing in this
case.
I don't see anything bad with setting ARP entries for
network addresses. While useless in usual network,
in a /31 RFC3021 it may be necessary. This, remove this code.
Remove the magic mfi_array is 288 bytes and just use the
sizeof the array since it is not 288 bytes.
Change reporting of a "SYSTEM" disk to "JBOD" to match
LSI MegaCli and firmware reporting.
This means that fiutil command to "create jbod" is now a
little confusing since a RAID per drive is not really what
LSI defines JBOD to be. This should be fixed in the future
and support added to really create LSI JBOD and enable that
feature on cards that support it.
This makes our naming scheme more closely match other systems and the
expectations of much third-party software. MIPS builds which are little-endian
should require and exhibit no changes. Big-endian TARGET_ARCHes must be
changed:
From: To:
mipseb mips
mipsn32eb mipsn32
mips64eb mips64
An entry has been added to UPDATING and some foot-shooting protection (complete
with warnings which should become errors in the near future) to the top-level
base system Makefile.
New kernel events can be added at various location for sampling or counting.
This will for example allow easy system profiling whatever the processor is
with known tools like pmcstat(8).
Simultaneous usage of software PMC and hardware PMC is possible, for example
looking at the lock acquire failure, page fault while sampling on
instructions.
Sponsored by: NETASQ
MFC after: 1 month
make the mfi_array 288 bytes, remove this magic number and the
calculations that go with it. Use the MFI_MAX_ROW_SIZE and
sizeof(struct mfi_array) in place of the prior calculations.
Change reporting a disk as "SYSTEM" when it is a "JBOD" reported
by the firmware and MegaCli. A JBOD appears as /dev/mfisyspd<n>.
This also means the mfiutil command to "create jbod" is now a
little confusing since a RAID per drive is not really what LSI
defines JBOD to be. In the future mfiutil should have an option
to create real JBOD's and enable that option in RAID controllers
that support it. In testing, it appears the RAID cache is not
used with JBOD but is with the RAID per disk. When this is
implemented more testing should be done to determine the pro's and
con's of JBOD versus RAID per disk.
Reviewed by: jhb
In case of multiple level of inlining all the locations are flattened.
Require recent binutils/addr2line (head works or binutils from ports
with the right $PATH order).
- Multiple fixes in the calltree output (recursion case, ...)
- Fix the calltree top view that previously hide some shared nodes.
Tested with Kcachegrind(kdesdk4)/qcachegrind(head).
Sponsored by: NETASQ
usr.sbin/dconschat/dconschat.c:163:65: error: format specifies type 'size_t' (aka 'unsigned int') but the argument has type 'off_t' (aka 'long long') [-Werror,-Wformat]
snprintf(buf, PAGE_SIZE, "\r\n[dconschat reset target(addr=0x%zx)...]\r\n", dc->reset);
~~^ ~~~~~~~~~
%llx
Silence this by casting dc->reset to intmax_t, and using the appropriate
length modifier. While here, wrap the line to a 80 character margin.
MFC after: 3 days
usbdump stores data. Until this patch it was not possible
to exchange traces between 32-bit, 64-bit, big- and
little endian platforms. The problem is the dynamic nature
of the BPF timestamp in the header. All other fields are
fixed size and little endian.
MFC after: 5 days
Makefiles were split out in this directory and others in userland, it makes it
quite easy to miss per-arch conditionals when changing something generally.
specific device we happen to be writing to. This fixes an issue when
running pc-sysinstall on a running system which needs ZFS and the main
disk gets exported.
Submitted by: kris
Obtained from: PC-BSD
- Remove unneeded whitespace for function calls.
- Add empty line at the top of functions without local variables.
- Change while (1) to for (;;).
MFC after: 1 week
Andrzej has a machine with 32GB of RAM, but only 16GB is reported by the
smbios.memory.enabled. Thus, use the greater of hw.realmem and the smbios
value.
Reported by: Andrzej Tobola <ato of iem pw edu pl>
Instead of blindly grabbing the line with 'Version string' and the
following one from the core info file, take all lines after 'Version
string' until the one one that matches the field format in the core info
file. This provides compatibility with VendorBSD modifications that have
a different kernel ident format.
Reviewed by: jhb
get rid of testing explicitly for clang (using ${CC:T:Mclang}) in
individual Makefiles.
Instead, use the following extra macros, for use with clang:
- NO_WERROR.clang (disables -Werror)
- NO_WCAST_ALIGN.clang (disables -Wcast-align)
- NO_WFORMAT.clang (disables -Wformat and friends)
- CLANG_NO_IAS (disables integrated assembler)
- CLANG_OPT_SMALL (adds flags for extra small size optimizations)
As a side effect, this enables setting CC/CXX/CPP in src.conf instead of
make.conf! For clang, use the following:
CC=clang
CXX=clang++
CPP=clang-cpp
MFC after: 2 weeks
Document the potential for jail escape.
From r224615:
Always disable mount and unmount for jails with enforce_statfs==2.
From r231267:
A new jail(8) option "devfs_ruleset" defines the ruleset enforcement for
mounting devfs inside jails. A value of -1 disables mounting devfs in
jails, a value of zero means no restrictions. Nested jails can only
have mounting devfs disabled or inherit parent's enforcement as jails are
not allowed to view or manipulate devfs(8) rules.
From r232059:
To improve control over the use of mount(8) inside a jail(8), introduce
a new jail parameter node with the following parameters:
allow.mount.devfs:
allow mounting the devfs filesystem inside a jail
allow.mount.nullfs:
allow mounting the nullfs filesystem inside a jail
From r232186:
allow.mount.zfs:
allow mounting the zfs filesystem inside a jail
allow.mount.zfs:
allow mounting the zfs filesystem inside a jail
This way the permssions for mounting all current VFCF_JAIL filesystems
inside a jail are controlled wia allow.mount.* jail parameters.
Update sysctl descriptions.
Update jail(8) and zfs(8) manpages.
TODO: document the connection of allow.mount.* and VFCF_JAIL for kernel
developers
MFC after: 10 days
a new jail parameter node with the following parameters:
allow.mount.devfs:
allow mounting the devfs filesystem inside a jail
allow.mount.nullfs:
allow mounting the nullfs filesystem inside a jail
Both parameters are disabled by default (equals the behavior before
devfs and nullfs in jails). Administrators have to explicitly allow
mounting devfs and nullfs for each jail. The value "-1" of the
devfs_ruleset parameter is removed in favor of the new allow setting.
Reviewed by: jamie
Suggested by: pjd
MFC after: 2 weeks
process. Normally it will cause the child to exit followed by the
termination of the supervisor after removing the pidfile.
This looks like desirable behavior, because termination of a
supervisor usually supposes termination of its charge. Also it will
fix the issue with stale pid files after reboot due to init kills a
supervisor before its child exits.
MFC after: 2 weeks
not to leak the descriptor after exec(3). This raises the issue for
daemon(3) of the pidfile lock to be lost when the child process
executes.
To solve this and also to have the pidfile cleaned up when the program
exits, if a pidfile is specified, spawn a child to exec the command
and wait in the parent keeping the pidfile locked until the child
process exits and remove the file.
Reported by: Andrey Zonov <andrey zonov org>
Suggested by: pjd
Reviewed by: pjd
MFC after: 2 weeks
starting up before the previous script finishes. This prevents an
infinite number of them from piling up and slowing a system down.
Since all the refactoring to make this happen required churning the
indenting of most of this file, make the indentation more consistent.
Reviewed by: simon
MFC after: 1 week
The reasoning behind this, is that if we are consistent in our
documentation about the uint*_t stuff, people will be less tempted to
write new code that uses the non-standard types.
I am not going to bump the man page dates, as these changes can be
considered style nits. The meaning of the man pages is unaffected.
MFC after: 1 month
At first, I added a utility called utxrm(8) to remove stale entries from
the user accounting database. It seems there are cases in which we need
to perform different operations on the database as well. Simply rename
utxrm(8) to utx(8) and place the old code under the "rm" command.
In addition to "rm", this tool supports "boot" and "shutdown", which are
going to be used by an rc-script which I am going to commit separately.
A new jail(8) option "devfs_ruleset" defines the ruleset enforcement for
mounting devfs inside jails. A value of -1 disables mounting devfs in
jails, a value of zero means no restrictions. Nested jails can only
have mounting devfs disabled or inherit parent's enforcement as jails are
not allowed to view or manipulate devfs(8) rules.
Utilizes new functions introduced in r231265.
Reviewed by: jamie
MFC after: 1 month
Some errors printed the jail name for unnamed (command line) jails.
Attempting to create an already-existing jail from the command line
returned with no error (even for non-root) due to bad logic in
start_state.
Ignore kvm_proc errors, which are typically caused by permission
problems. Instead, stop ignoring permission errors when removing
a jail (but continue to silently ignore other errors, i.e. the
jail no longer existing). This makes non-root attempts at removing
a jail give a clearer error message.
do not guard it by WITH_KVM ifdef. This allows to build
ifmcstat(8) without kvm(3) support.
PR: bin/164353
Submitted by: Ivan Rozhuk
MFC after: 2 weeks
data changes.
cam_ccb.h: Add a new advanced information type, CDAI_TYPE_RCAPLONG,
for long read capacity data.
cam_xpt_internal.h:
Add a read capacity data pointer and length to struct cam_ed.
cam_xpt.c: Free the read capacity buffer when a device goes away.
While we're here, make sure we don't leak memory for other
malloced fields in struct cam_ed.
scsi_all.c: Update the scsi_read_capacity_16() to take a uint8_t * and
a length instead of just a pointer to the parameter data
structure. This will hopefully make this function somewhat
immune to future changes in the parameter data.
scsi_all.h: Add some extra bit definitions to struct
scsi_read_capacity_data_long, and bump up the structure
size to the full size specified by SBC-3.
Change the prototype for scsi_read_capacity_16().
scsi_da.c: Register changes in read capacity data with the transport
layer. This allows the transport layer to send out an
async notification to interested parties. Update the
dasetgeom() API.
Use scsi_extract_sense_len() instead of
scsi_extract_sense().
scsi_xpt.c: Add support for the new CDAI_TYPE_RCAPLONG advanced
information type.
Make sure we set the physpath pointer to NULL after freeing
it. This allows blindly freeing it in the struct cam_ed
destructor.
sys/param.h: Bump __FreeBSD_version from 1000005 to 1000006 to make it
easier for third party drivers to determine that the read
capacity data async notification is available.
camcontrol.c,
mptutil/mpt_cam.c:
Update these for the new scsi_read_capacity_16() argument
structure.
Sponsored by: Spectra Logic
better to leave the pidfile open where it was. Add a note to the
man page describing pidfile strategies to use if the daemon is to
be run as a user other than root.
- Move the reinstall logic to be before menus are initialised
(menus are not needed when reinstalling a zonefile).
- Remove unnecessary re-initialization of path_db.
- Update variable name and error message because we now use the
zone name relative to /usr/share/zoneinfo, not the full path.
pr: bin/164041
Submitted by: Devin Teske <dteske vicor com>
MFC after: 1 week
jail(8) does a chdir(2) to the given path argument. Kernel evaluates the
jail path from the new cwd and not from the original cwd, which leads to
undesired behavior if given a relative path.
Reviewed by: jamie
MFC after: 2 weeks
error: variable 'clnt_stat' set but not used
Approved by: dim, cperciva (mentor, blanket for pre-mentorship already-approved commits)
MFC after: 3 days
error: variable 'parentrecnum' set but not used
Approved by: dim, cperciva (mentor, blanket for pre-mentorship already-approved commits)
MFC after: 3 days
error: variable 'temp' set but not used
Approved by: dim
Approved by: cperciva (mentor, blanket for pre-mentorship already-approved commits)
MFC after: 3 days
error: variable 'dirp' set but not used
error: variable 'dirplen' set but not used
Approved by: dim, cperciva (mentor, blanket for pre-mentorship already-approved commits)
MFC after: 3 days
error: variable 'current_cpu' set but not used
Approved by: dim, cperciva (mentor, blanket for pre-mentorship already-approved commits)
MFC after: 3 days
error: variable 'extra_async_bytes' set but not used
Approved by: dim, cperciva (mentor, blanket for pre-mentorship already-approved commits)
MFC After: 3 days
error: variable 'addrs' set but not used
Approved by: dim
Approved by: cperciva (mentor, blanket for pre-mentorship already-approved commits)
MFC After: 3 days
Update verbose output to match what actually happens when selecting
the UTC option, and when the -n option is used.
Patch updated slightly for new libdialog.
PR: bin/164042
Submitted by: Devin Teske <dteske vicor com>
MFC after: 2 weeks
If the specified zone file does not exist or the -n flag is specified,
do not update /var/db/zoneinfo.
PR: bin/164039
Submitted by: Devin Teske <dteske vicor com>
MFC after: 1 week
installing zoneinfo. While we're in the vicinity, add some missing
error checking to eliminate an unhelpful error message when unlink()
fails.
/me is embarrassed by the quality of his 16-year-old code.
The whole thing is awful and could stand a complete rewrite.
PR: 164038
Submitted by: Devin Teske (but implemented differently)
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
so pid files can be written in /var/run when started as root.
I do not expect this to cause any security issues, but if anyone objects
it could be easily reverted.
PR: bin/159568
MFC after: 4 weeks
It's too late to change this in 9.0 -- so we have a release with the
misspelling in the wild and should not break users that depend on it.
Deprecating/replacing it because of a one-char typo seems excessive.
The index() and rindex() functions were marked LEGACY in the 2001
revision of POSIX and were subsequently removed from the 2008 revision.
The strchr() and strrchr() functions are part of the C standard.
This makes the source code a lot more consistent, as most of these C
files also call into other str*() routines. In fact, about a dozen
already perform strchr() calls.
In this contest, index refers to the index(3) function. In this case it
doesn't really harm, as this function is never called with idx == NULL.
MFC after: 2 weeks
- use warnx() to tell the user whether a process is running in normal,
idle or realtime priority. with the old code it would have been possible
for another process to send data to stdout between
printf("%s: ", p);
and
printf("* priority\n");
and thus break the formatting.
- 'rtprio 10 -0' triggeres non-intuitive behavior. It would first set the
priority of itself to 10 *and* would then try to execute '-0'. Of course,
setting the priority of [id|rt]prio itself doesn't make a lot of sense,
but it is intuitive compared to the previous behavior.
- 'rtprio -t --1' will actually pass over the '-1' to rtprio(). Now
invoking rtprio like this will catch the wrong usage before passing
over the invalid argument to rtprio().
- Garrett Cooper suggested to add further diagnostics where the failure
occures, if execvp fails.
PR: bin/154042
Submitted by: arundel
MFC after: 1 month
- Fix boot0 to check for PXE when using the pre-set setting for the
preferred slice.
- Update boot0cfg to use slice 6 to select PXE. Accept a 'pxe' argument
instead of a number for the 's' option as a way to select PXE as well.
Submitted by: Andrew Boyer aboyer averesystems
MFC after: 2 weeks
- Let panic() use _Noreturn and __printflike() instead of GCC-specific
attributes.
- Remove prototype from ffs_subr.c and let it include ffs_extern.h.
- Forward declare struct inode to make ffs_extern.h not depend on it.
- Cast time_t's to long, and print them with %ld.
- Print ptrdiff_t's with %td.
- Print ssize_t's and size_t's with %zd and %zu.
- Print int32_t's with %d.
Also, replace some int variables with the more appropriate size_t.
MFC after: 1 week
x86, any alignment warnings can be safely ignored. Define YY_NO_INPUT
in usr.sbin/ndiscvt/inf-token.l, so no unused lex functions are defined.
MFC after: 1 week
None of the symbols provided by kbdcontrol.c are used by other source
files of this binary. Slightly reduce the binary size and make much more
symbols read-only by adding proper static and const keywords.
While there, remove the false optimisation of the colors array. It seems
that changing it to an array of pointers instead of a 16x16 array does
not cause any increase in binary size at all.
any installer-provided configuration files have been copied. This allows
users to edit their fstab, if desired, and to see what the installer has
placed in rc.conf.
Requested by: phk
MFC after: 1 day
