Some of the sanitizers from compiler-rt can use ignore lists, which are
loosely modeled on valgrind's example. Upstream provides default lists
for AddressSanitizer, CFI, and MemorySanitizer, so install these in the
expected location, /usr/lib/clang/14.0.3/share.
Reviewed by: emaste
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D35338
The program will be installed as bintrans, uuencode, uudecode,
b64encode, and b64decode and will be responsible for running the coders
according to their historical behavior.
Additionally, bintrans will be able to take a parameter designating
the coder and accept all its options in this form:
bintrans <coder> [options]
and the behavior should be the same as if
<coder> [options]
was invoked.
This has the advantage that adding coders won't require installing them
as binaries.
Move uudecode files to uuencode since the latter is the one that
provides the manual page.
Reviewed by: delphij (previous version)
Differential Revision: https://reviews.freebsd.org/D32943
The gunion(8) utility is used to track changes to a read-only disk on
a writable disk. Logically, a writable disk is placed over a read-only
disk. Write requests are intercepted and stored on the writable
disk. Read requests are first checked to see if they have been
written on the top (writable disk) and if found are returned. If
they have not been written on the top disk, then they are read from
the lower disk.
The gunion(8) utility can be especially useful if you have a large
disk with a corrupted filesystem that you are unsure of how to
repair. You can use gunion(8) to place another disk over the corrupted
disk and then attempt to repair the filesystem. If the repair fails,
you can revert all the changes in the upper disk and be back to the
unchanged state of the lower disk thus allowing you to try another
approach to repairing it. If the repair is successful you can commit
all the writes recorded on the top disk to the lower disk.
Another use of the gunion(8) utility is to try out upgrades to your
system. Place the upper disk over the disk holding your filesystem
that is to be upgraded and then run the upgrade on it. If it works,
commit it; if it fails, revert the upgrade.
Further details can be found in the gunion(8) manual page.
Reviewed by: Chuck Silvers, kib (earlier version)
tested by: Peter Holm
Differential Revision: https://reviews.freebsd.org/D32697
This could be done better by making each test a separate ATF test case.
This exercise is left for the reader.
Reviewed by: delphij (earlier version)
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D34303
NetBSD has an ATF test for newfs_msdos. Connect it to the build.
Adapt it for FreeBSD. This would have caught the bug fixed by my
previous commit.
Reviewed by: delphij, emaste
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D34116
Part two: Append bhyve -K option for specified keyboard layout
with layout setting files every languages.
Since the cmd option '-k' was used in the meantime
it was changed to '-K'
PR: 246121
Submitted by: koinec@yahoo.co.jp
Reviewed by: grehan@
Differential Revision: https://reviews.freebsd.org/D29473
MFC after: 4 weeks
And put the mtree binary and files in it.
Useful to create small mfsroot using /etc/rc.d/var without
having to install FreeBSD-utilities.
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33442
Add an idletime user group that allows non-root users to run processes
with idle scheduling priority. Privileges are granted by a MAC policy in
the mac_priority module. For this purpose, the kernel privilege
PRIV_SCHED_IDPRIO was added to sys/priv.h (kernel module ABI change).
Deprecate the system wide sysctl(8) knob
security.bsd.unprivileged_idprio which lets any user run idle priority
processes, regardless of context. While the knob is still working, it is
marked as deprecated in the description and in the man pages.
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D33338
This is a MAC policy module that grants scheduling privileges based on
group membership. Users or processes in the group realtime (gid 47) are
allowed to run threads and processes with realtime scheduling priority.
For timing-sensitive, low-latency software like audio/jack, running with
realtime priority helps to avoid stutter and gaps.
PR: 239125
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D33191
bsddialog is an attempt to write in permissive license a replacement for
libdialog.
While it is still in early stage it is good enough to already be used in
many areas, it is imported as private lib until it matures enough to be
considered as having a stable ABI
This updates llvm, clang, compiler-rt, libc++, libunwind, lld, lldb and
openmp to llvmorg-13-init-16847-g88e66fa60ae5, the last commit before
the upstream release/13.x branch was created.
PR: 258209
MFC after: 2 weeks
Upstream one-true-awk has two sets of tests. These are in addition to
NetBSD's tests we're using. The 'bugs-fixed' tests from upstream are
ready to use as-is (more or less). However, the 'tests' from upstream
are not, so for now we'll just use the netbsd and bugs-fixed tests.
They provide an OK workout and are better than nothing, though the tests
themselves are for specific esoteric things.
The upstream bugs-fixed tests are *ALMOST* a drop in. However, 3 test
for errors and the upstream test jig mashes stdout and stderr together,
which atf doesn't do, so make a tiny tweak to the upstream tests that I
hope to upstream. Plus upstream has ../a.out: instead of awk: in the
output. Not sure how to deal with this yet, so I've not proposed
anything upstream and have changed the test locally.
In addition, the system-status.awk test is not suitable to run in ATF.
It wants to force sh to dump core, but kyua doesn't seem to allow that
sometimes so the test will fail or pass based on whether or not a core
dump can be created. Since it's unstable, remove it.
This required moving the netbsd tests to a new direcotry, so update
mtree files as well. The change is useless for 'make check' without it.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D31376
In the recent history sh(1) has gain the missing features for it to
become a usable interractive shell:
- command completion
- persistent history support
- improvements on the default bindings in emacs mode
- improvements in the vi mode (repect $EDITOR)
- print a newline when exiting via ^D
- default prompt and improvements on how PS1 can be configured
- and more.
This changes also simplifies making tiny freebsd images with only sh(1)
as a shell
Using /etc/jail.{jailname}.conf is nice, however it makes /etc/ very
messy if you have many jails. This patch allows one to move these
config files out of the way into /etc/jail.conf.d/{jailname}.conf.
Note that the same caveat as /etc/jail.*.conf applies: the jail service
will not autodiscover all of these for starting 'all' jails. This is
considered future work, since the behavior matches.
Reviewed by: kevans
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D24570
Add a credential to the cdev object in sysctl_vmm_create(), then check
that we have the correct credentials in sysctl_vmm_destroy(). This
prevents a process in one jail from opening or destroying the /dev/vmm
file corresponding to a VM in a sibling jail.
Add regression tests.
Reviewed by: jhb, markj
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D31156
The framework knows how to create directories and tag them properly
for a the creation of a mtree, not need to hardcode all the locales
entries in bsd.usr.mk
This simplifies addition of new locales but also allow people building
with WITHOUT_LOCALES to end up with a directory full of empty files
From the zpool_influxdb.8 manual page:
zpool_influxdb produces InfluxDB-line-protocol-compatible metrics from
zpools. Like the zpool command, zpool_influxdb reads the current pool
status and statistics. Unlike the zpool command which is intended for
humans, zpool_influxdb formats the output in the InfluxDB line protocol.
The expected use is as a plugin to a metrics collector or aggregator,
such as Telegraf.
zpool_influxdb is installed into /usr/libexec/zfs/
Differential revision: https://reviews.freebsd.org/D31094
MFC after: 3 days
Old certctl commands still work for compatability, but are deprecated.
Approved by: secteam (gordon)
Differential Revision: https://reviews.freebsd.org/D30807
This updates llvm, clang, compiler-rt, libc++, libunwind, lld, lldb and
openmp to llvmorg-12-init-17869-g8e464dd76bef, the last commit before the
upstream release/12.x branch was created.
PR: 255570
MFC after: 6 weeks
After length decisions, we've decided that the if_wg(4) driver and
related work is not yet ready to live in the tree. This driver has
larger security implications than many, and thus will be held to
more scrutiny than other drivers.
Please also see the related message sent to the freebsd-hackers@
and freebsd-arch@ lists by Kyle Evans <kevans@FreeBSD.org> on
2021/03/16, with the subject line "Removing WireGuard Support From Base"
for additional context.
This is the culmination of about a week of work from three developers to
fix a number of functional and security issues. This patch consists of
work done by the following folks:
- Jason A. Donenfeld <Jason@zx2c4.com>
- Matt Dunwoodie <ncon@noconroy.net>
- Kyle Evans <kevans@FreeBSD.org>
Notable changes include:
- Packets are now correctly staged for processing once the handshake has
completed, resulting in less packet loss in the interim.
- Various race conditions have been resolved, particularly w.r.t. socket
and packet lifetime (panics)
- Various tests have been added to assure correct functionality and
tooling conformance
- Many security issues have been addressed
- if_wg now maintains jail-friendly semantics: sockets are created in
the interface's home vnet so that it can act as the sole network
connection for a jail
- if_wg no longer fails to remove peer allowed-ips of 0.0.0.0/0
- if_wg now exports via ioctl a format that is future proof and
complete. It is additionally supported by the upstream
wireguard-tools (which we plan to merge in to base soon)
- if_wg now conforms to the WireGuard protocol and is more closely
aligned with security auditing guidelines
Note that the driver has been rebased away from using iflib. iflib
poses a number of challenges for a cloned device trying to operate in a
vnet that are non-trivial to solve and adds complexity to the
implementation for little gain.
The crypto implementation that was previously added to the tree was a
super complex integration of what previously appeared in an old out of
tree Linux module, which has been reduced to crypto.c containing simple
boring reference implementations. This is part of a near-to-mid term
goal to work with FreeBSD kernel crypto folks and take advantage of or
improve accelerated crypto already offered elsewhere.
There's additional test suite effort underway out-of-tree taking
advantage of the aforementioned jail-friendly semantics to test a number
of real-world topologies, based on netns.sh.
Also note that this is still a work in progress; work going further will
be much smaller in nature.
MFC after: 1 month (maybe)
Instead of whether /boot/efi exists, which it now always does, including
on systems that don't and can't use EFI, use whether /boot/efi is
present in fstab to signal to the installer that it is a valid ESP and
should be configured. This has essentially the same semantics, but allows
/boot/efi to be created unconditionally.
Reviewed by: bdragon, imp
Tested by: bdragon (ppc64)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D29068
This had prevented the bootconfig step from determining if an ESP exists,
resulting in its unconditional setup. On BIOS-booted amd64, this wasn't
harmful, just unnecessary, but it resulted in failed installations on
non-EFI-supporting platforms like powerpc64.
MFC after: 3 days
Add /var/run/bhyve/ to BSD.var.dist so we don't have to call mkdir when
creating the unix domain socket for a given bhyve vm.
The path to the unix domain socket for a bhyve vm will now be
/var/run/bhyve/vmname instead of /var/run/bhyve/checkpoint/vmname
Move BHYVE_RUN_DIR from snapshot.c to snapshot.h so it can be shared
to bhyvectl(8).
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D28783
It will be used by the upcoming HID-over-i2C implementation. Should be
no-op, except hid.ko module dependency is to be added to affected drivers.
Reviewed by: hselasky, manu
Differential revision: https://reviews.freebsd.org/D27867
loader_conf_dirs is the supporting mechanism for the included
/boot/loader.conf.d directory. When lualoader finishes processing all of
the loader_conf_files it finds after walking /boot/defaults/loader.conf,
it will now check any and all loader_conf_dirs and process files ending
in ".conf" as if they were a loader.conf.
Note that loader_conf_files may be specified in a loader.conf.d config
file, but loader_conf_dirs may *not*. It will only be processed as specified
in /boot/defaults/loader.conf and any loader_conf_files that were loaded
from there.
Reviewed by: allanjude, freqlabs, rpokala, tsoome
Includes suggestion from: imp
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D25608
Unconditionally install bsdgrep as grep, bootstrap or not. Remove all
build glue and stop installing both gnugrep and libgnuregex now that
all consumers of the latter are gone.
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D27732
New Netgraph module ng_macfilter:
Macfilter to route packets through different hooks based on sender MAC address.
Based on ng_macfilter written by Pekka Nikander
Sponsered by Retina b.v.
Reviewed by: afedorov
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D27268