pwrite(2) syscalls are wrapped to provide compatibility with pre-7.x
kernels which required padding before the off_t parameter. The
fcntl(2) contains compatibility code to handle kernels before the
struct flock was changed during the 8.x CURRENT development. The
shims were reasonable to allow easier revert to the older kernel at
that time.
Now, two or three major releases later, shims do not serve any
purpose. Such old kernels cannot handle current libc, so revert the
compatibility code.
Make padded syscalls support conditional under the COMPAT6 config
option. For COMPAT32, the syscalls were under COMPAT6 already.
Remove WITHOUT_SYSCALL_COMPAT build option, which only purpose was to
(partially) disable the removed shims.
Reviewed by: jhb, imp (previous versions)
Discussed with: peter
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Introduce fget_fcntl which performs appropriate checks when needed.
This removes a branch from fget_unlocked.
Introduce fget_mmap dealing with cap_rights_to_vmprot conversion.
This removes a branch from _fget.
Modify fget_unlocked to pass sequence counter to interested callers so
that they can perform their own checks and make sure the result was
otained from stable & current state.
Reviewed by: silence on -hackers
especially for platforms where unaligned access is not allowed. Make
it possible to override the small buffer size.
A simple continuous read string test using libusb showed a reduction
in CPU usage from roughly 10% to less than 1% using a dual-core GHz
CPU, when the malloc() operation was skipped for small buffers.
MFC after: 2 weeks
fd_lastfile is guaranteed to be the biggest open fd, so when the intent
is to iterate over active fds or lookup one, there is no point in looking
beyond that limit.
Few places are left unpatched for now.
MFC after: 1 week
SBT_MAX, to make it more robust in case internal type representation will
change in the future. All the consumers were migrated to SBT_MAX and
every new consumer (if any) should from now use this interface.
Requested by: bapt, jmg, Ryan Lortie (implictly)
Reviewed by: mav, bde
further refinement is required as some device drivers intended to be
portable over FreeBSD versions rely on __FreeBSD_version to decide whether
to include capability.h.
MFC after: 3 weeks
a very hard time to fully understand) with much more intuitive rights:
CAP_EVENT - when set on descriptor, the descriptor can be monitored
with syscalls like select(2), poll(2), kevent(2).
CAP_KQUEUE_EVENT - When set on a kqueue descriptor, the kevent(2)
syscall can be called on this kqueue to with the eventlist
argument set to non-NULL value; in other words the given
kqueue descriptor can be used to monitor other descriptors.
CAP_KQUEUE_CHANGE - When set on a kqueue descriptor, the kevent(2)
syscall can be called on this kqueue to with the changelist
argument set to non-NULL value; in other words it allows to
modify events monitored with the given kqueue descriptor.
Add alias CAP_KQUEUE, which allows for both CAP_KQUEUE_EVENT and
CAP_KQUEUE_CHANGE.
Add backward compatibility define CAP_POLL_EVENT which is equal to CAP_EVENT.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
devfs_iosize_max_clamp sysctl, which allows/disables SSIZE_MAX-sized
i/o requests on the devfs files.
Sponsored by: The FreeBSD Foundation
Reminded by: Dmitry Sivachenko <trtrmitya@gmail.com>
MFC after: 1 week
in the future in a backward compatible (API and ABI) way.
The cap_rights_t represents capability rights. We used to use one bit to
represent one right, but we are running out of spare bits. Currently the new
structure provides place for 114 rights (so 50 more than the previous
cap_rights_t), but it is possible to grow the structure to hold at least 285
rights, although we can make it even larger if 285 rights won't be enough.
The structure definition looks like this:
struct cap_rights {
uint64_t cr_rights[CAP_RIGHTS_VERSION + 2];
};
The initial CAP_RIGHTS_VERSION is 0.
The top two bits in the first element of the cr_rights[] array contain total
number of elements in the array - 2. This means if those two bits are equal to
0, we have 2 array elements.
The top two bits in all remaining array elements should be 0.
The next five bits in all array elements contain array index. Only one bit is
used and bit position in this five-bits range defines array index. This means
there can be at most five array elements in the future.
To define new right the CAPRIGHT() macro must be used. The macro takes two
arguments - an array index and a bit to set, eg.
#define CAP_PDKILL CAPRIGHT(1, 0x0000000000000800ULL)
We still support aliases that combine few rights, but the rights have to belong
to the same array element, eg:
#define CAP_LOOKUP CAPRIGHT(0, 0x0000000000000400ULL)
#define CAP_FCHMOD CAPRIGHT(0, 0x0000000000002000ULL)
#define CAP_FCHMODAT (CAP_FCHMOD | CAP_LOOKUP)
There is new API to manage the new cap_rights_t structure:
cap_rights_t *cap_rights_init(cap_rights_t *rights, ...);
void cap_rights_set(cap_rights_t *rights, ...);
void cap_rights_clear(cap_rights_t *rights, ...);
bool cap_rights_is_set(const cap_rights_t *rights, ...);
bool cap_rights_is_valid(const cap_rights_t *rights);
void cap_rights_merge(cap_rights_t *dst, const cap_rights_t *src);
void cap_rights_remove(cap_rights_t *dst, const cap_rights_t *src);
bool cap_rights_contains(const cap_rights_t *big, const cap_rights_t *little);
Capability rights to the cap_rights_init(), cap_rights_set(),
cap_rights_clear() and cap_rights_is_set() functions are provided by
separating them with commas, eg:
cap_rights_t rights;
cap_rights_init(&rights, CAP_READ, CAP_WRITE, CAP_FSTAT);
There is no need to terminate the list of rights, as those functions are
actually macros that take care of the termination, eg:
#define cap_rights_set(rights, ...) \
__cap_rights_set((rights), __VA_ARGS__, 0ULL)
void __cap_rights_set(cap_rights_t *rights, ...);
Thanks to using one bit as an array index we can assert in those functions that
there are no two rights belonging to different array elements provided
together. For example this is illegal and will be detected, because CAP_LOOKUP
belongs to element 0 and CAP_PDKILL to element 1:
cap_rights_init(&rights, CAP_LOOKUP | CAP_PDKILL);
Providing several rights that belongs to the same array's element this way is
correct, but is not advised. It should only be used for aliases definition.
This commit also breaks compatibility with some existing Capsicum system calls,
but I see no other way to do that. This should be fine as Capsicum is still
experimental and this change is not going to 9.x.
Sponsored by: The FreeBSD Foundation
- Reconnect with some minor modifications, in particular now selsocket()
internals are adapted to use sbintime units after recent'ish calloutng
switch.
Fix kern_select() and sys_poll() so that they can handle sub-tick
precision for timeouts (in the same fashion it was done for nanosleep()
in r247797).
Sponsored by: Google Summer of Code 2012, iXsystems inc.
Tested by: flo, marius, ian, markj, Fabian Keil
- Capability is no longer separate descriptor type. Now every descriptor
has set of its own capability rights.
- The cap_new(2) system call is left, but it is no longer documented and
should not be used in new code.
- The new syscall cap_rights_limit(2) should be used instead of
cap_new(2), which limits capability rights of the given descriptor
without creating a new one.
- The cap_getrights(2) syscall is renamed to cap_rights_get(2).
- If CAP_IOCTL capability right is present we can further reduce allowed
ioctls list with the new cap_ioctls_limit(2) syscall. List of allowed
ioctls can be retrived with cap_ioctls_get(2) syscall.
- If CAP_FCNTL capability right is present we can further reduce fcntls
that can be used with the new cap_fcntls_limit(2) syscall and retrive
them with cap_fcntls_get(2).
- To support ioctl and fcntl white-listing the filedesc structure was
heavly modified.
- The audit subsystem, kdump and procstat tools were updated to
recognize new syscalls.
- Capability rights were revised and eventhough I tried hard to provide
backward API and ABI compatibility there are some incompatible changes
that are described in detail below:
CAP_CREATE old behaviour:
- Allow for openat(2)+O_CREAT.
- Allow for linkat(2).
- Allow for symlinkat(2).
CAP_CREATE new behaviour:
- Allow for openat(2)+O_CREAT.
Added CAP_LINKAT:
- Allow for linkat(2). ABI: Reuses CAP_RMDIR bit.
- Allow to be target for renameat(2).
Added CAP_SYMLINKAT:
- Allow for symlinkat(2).
Removed CAP_DELETE. Old behaviour:
- Allow for unlinkat(2) when removing non-directory object.
- Allow to be source for renameat(2).
Removed CAP_RMDIR. Old behaviour:
- Allow for unlinkat(2) when removing directory.
Added CAP_RENAMEAT:
- Required for source directory for the renameat(2) syscall.
Added CAP_UNLINKAT (effectively it replaces CAP_DELETE and CAP_RMDIR):
- Allow for unlinkat(2) on any object.
- Required if target of renameat(2) exists and will be removed by this
call.
Removed CAP_MAPEXEC.
CAP_MMAP old behaviour:
- Allow for mmap(2) with any combination of PROT_NONE, PROT_READ and
PROT_WRITE.
CAP_MMAP new behaviour:
- Allow for mmap(2)+PROT_NONE.
Added CAP_MMAP_R:
- Allow for mmap(PROT_READ).
Added CAP_MMAP_W:
- Allow for mmap(PROT_WRITE).
Added CAP_MMAP_X:
- Allow for mmap(PROT_EXEC).
Added CAP_MMAP_RW:
- Allow for mmap(PROT_READ | PROT_WRITE).
Added CAP_MMAP_RX:
- Allow for mmap(PROT_READ | PROT_EXEC).
Added CAP_MMAP_WX:
- Allow for mmap(PROT_WRITE | PROT_EXEC).
Added CAP_MMAP_RWX:
- Allow for mmap(PROT_READ | PROT_WRITE | PROT_EXEC).
Renamed CAP_MKDIR to CAP_MKDIRAT.
Renamed CAP_MKFIFO to CAP_MKFIFOAT.
Renamed CAP_MKNODE to CAP_MKNODEAT.
CAP_READ old behaviour:
- Allow pread(2).
- Disallow read(2), readv(2) (if there is no CAP_SEEK).
CAP_READ new behaviour:
- Allow read(2), readv(2).
- Disallow pread(2) (CAP_SEEK was also required).
CAP_WRITE old behaviour:
- Allow pwrite(2).
- Disallow write(2), writev(2) (if there is no CAP_SEEK).
CAP_WRITE new behaviour:
- Allow write(2), writev(2).
- Disallow pwrite(2) (CAP_SEEK was also required).
Added convinient defines:
#define CAP_PREAD (CAP_SEEK | CAP_READ)
#define CAP_PWRITE (CAP_SEEK | CAP_WRITE)
#define CAP_MMAP_R (CAP_MMAP | CAP_SEEK | CAP_READ)
#define CAP_MMAP_W (CAP_MMAP | CAP_SEEK | CAP_WRITE)
#define CAP_MMAP_X (CAP_MMAP | CAP_SEEK | 0x0000000000000008ULL)
#define CAP_MMAP_RW (CAP_MMAP_R | CAP_MMAP_W)
#define CAP_MMAP_RX (CAP_MMAP_R | CAP_MMAP_X)
#define CAP_MMAP_WX (CAP_MMAP_W | CAP_MMAP_X)
#define CAP_MMAP_RWX (CAP_MMAP_R | CAP_MMAP_W | CAP_MMAP_X)
#define CAP_RECV CAP_READ
#define CAP_SEND CAP_WRITE
#define CAP_SOCK_CLIENT \
(CAP_CONNECT | CAP_GETPEERNAME | CAP_GETSOCKNAME | CAP_GETSOCKOPT | \
CAP_PEELOFF | CAP_RECV | CAP_SEND | CAP_SETSOCKOPT | CAP_SHUTDOWN)
#define CAP_SOCK_SERVER \
(CAP_ACCEPT | CAP_BIND | CAP_GETPEERNAME | CAP_GETSOCKNAME | \
CAP_GETSOCKOPT | CAP_LISTEN | CAP_PEELOFF | CAP_RECV | CAP_SEND | \
CAP_SETSOCKOPT | CAP_SHUTDOWN)
Added defines for backward API compatibility:
#define CAP_MAPEXEC CAP_MMAP_X
#define CAP_DELETE CAP_UNLINKAT
#define CAP_MKDIR CAP_MKDIRAT
#define CAP_RMDIR CAP_UNLINKAT
#define CAP_MKFIFO CAP_MKFIFOAT
#define CAP_MKNOD CAP_MKNODAT
#define CAP_SOCK_ALL (CAP_SOCK_CLIENT | CAP_SOCK_SERVER)
Sponsored by: The FreeBSD Foundation
Reviewed by: Christoph Mallon <christoph.mallon@gmx.de>
Many aspects discussed with: rwatson, benl, jonathan
ABI compatibility discussed with: kib
GIANT from VFS. In addition, disconnect also netsmb, which is a base
requirement for SMBFS.
In the while SMBFS regular users can use FUSE interface and smbnetfs
port to work with their SMBFS partitions.
Also, there are ongoing efforts by vendor to support in-kernel smbfs,
so there are good chances that it will get relinked once properly locked.
This is not targeted for MFC.
zero but in any case is overwritten by successive copyin(), making the
previous initialization useless. Remove this.
As an added bonus this fixes a style(9) bug.
Discussed with: kib
Approved by: gnn (mentor)
MFC after: 3 days
does not fit into registers, declare that we do not support this case
using CTASSERT(), and remove endianess-unsafe code to split return value
into td_retval.
While there, change the style of the sysctl debug.iosize_max_clamp
definition.
Requested by: bde
MFC after: 3 weeks
Add the sysctl debug.iosize_max_clamp, enabled by default. Setting the
sysctl to zero allows to perform the SSIZE_MAX-sized i/o requests from
the usermode.
Discussed with: bde, das (previous versions)
MFC after: 1 month
iteration over the fdsets, kern_select() limits the length of the
fdsets copied in by the last valid file descriptor index. If any bit
is set in a mask above the limit, current implementation ignores the
filedescriptor, instead of returning EBADF.
Fix the issue by scanning the tails of fdset before entering the
select loop and returning EBADF if any bit above last valid
filedescriptor index is set. The performance impact of the additional
check is only imposed on the (somewhat) buggy applications that pass
bad file descriptors to select(2) or pselect(2).
PR: kern/155606, kern/162379
Discussed with: cognet, glebius
Tested by: andreast (powerpc, all 64/32bit ABI combinations, big-endian),
marius (sparc64, big-endian)
MFC after: 2 weeks
patch modifies makesyscalls.sh to prefix all of the non-compatibility
calls (e.g. not linux_, freebsd32_) with sys_ and updates the kernel
entry points and all places in the code that use them. It also
fixes an additional name space collision between the kernel function
psignal and the libc function of the same name by renaming the kernel
psignal kern_psignal(). By introducing this change now we will ease future
MFCs that change syscalls.
Reviewed by: rwatson
Approved by: re (bz)
If a selinfo object is recorded (via selrecord()) and then it is
quickly destroyed, with the waiters missing the opportunity to awake,
at the next iteration they will find the selinfo object destroyed,
causing a PF#.
That happens because the selinfo interface has no way to drain the
waiters before to destroy the registered selinfo object. Also this
race is quite rare to get in practice, because it would require a
selrecord(), a poll request by another thread and a quick destruction
of the selrecord()'ed selinfo object.
Fix this by adding the seldrain() routine which should be called
before to destroy the selinfo objects (in order to avoid such case),
and fix the present cases where it might have already been called.
Sometimes, the context is safe enough to prevent this type of race,
like it happens in device drivers which installs selinfo objects on
poll callbacks. There, the destruction of the selinfo object happens
at driver detach time, when all the filedescriptors should be already
closed, thus there cannot be a race.
For this case, mfi(4) device driver can be set as an example, as it
implements a full correct logic for preventing this from happening.
Sponsored by: Sandvine Incorporated
Reported by: rstone
Tested by: pluknet
Reviewed by: jhb, kib
Approved by: re (bz)
MFC after: 3 weeks
When calling poll(2) on a capability, unwrap first and then poll the
underlying object.
Approved by: re (kib), mentor (rwatson)
Sponsored by: Google Inc
kernel for FreeBSD 9.0:
Add a new capability mask argument to fget(9) and friends, allowing system
call code to declare what capabilities are required when an integer file
descriptor is converted into an in-kernel struct file *. With options
CAPABILITIES compiled into the kernel, this enforces capability
protection; without, this change is effectively a no-op.
Some cases require special handling, such as mmap(2), which must preserve
information about the maximum rights at the time of mapping in the memory
map so that they can later be enforced in mprotect(2) -- this is done by
narrowing the rights in the existing max_protection field used for similar
purposes with file permissions.
In namei(9), we assert that the code is not reached from within capability
mode, as we're not yet ready to enforce namespace capabilities there.
This will follow in a later commit.
Update two capability names: CAP_EVENT and CAP_KEVENT become
CAP_POST_KEVENT and CAP_POLL_KEVENT to more accurately indicate what they
represent.
Approved by: re (bz)
Submitted by: jonathan
Sponsored by: Google Inc
for socket, when specified POLLIN|POLLOUT in events, you would have one
selfd registered for receiving socket buffer, and one for sending. Now,
if both events are not ready to fire at the time of the initial scan,
but are simultaneously ready after the sleep, pollrescan() would iterate
over the pollfd struct twice. Since both times revents is not zero,
returned value would be off by one.
Fix this by recalculating the return value in pollout().
PR: kern/143029
MFC after: 2 weeks
fd_set bits in select(2). It seems that historical behaviour is to not
reporting exception on EOF, and several applications are broken.
Reported by: Yoshihiko Sarumaru <ysarumaru gmail com>
Discussed with: bde
PR: ports/140934
MFC after: 2 weeks
for upcoming 64-bit PowerPC and MIPS support. This renames the COMPAT_IA32
option to COMPAT_FREEBSD32, removes some IA32-specific code from MI parts
of the kernel and enhances the freebsd32 compatibility code to support
big-endian platforms.
Reviewed by: kib, jhb
well-known race condition, which elimination was the reason for the
function appearance in first place. If sigmask supplied as argument to
pselect() enables a signal, the signal might be delivered before thread
called select(2), causing lost wakeup. Reimplement pselect() in kernel,
making change of sigmask and sleep atomic.
Since signal shall be delivered to the usermode, but sigmask restored,
set TDP_OLDMASK and save old mask in td_oldsigmask. The TDP_OLDMASK
should be cleared by ast() in case signal was not gelivered during
syscall execution.
Reviewed by: davidxu
Tested by: pho
MFC after: 1 month
longs. Since 32bit processes longs are 4 bytes, 64bit kernel may copy in
or out 4 bytes more then the process expected.
Calculate the amount of bytes to copy taking into account size of fd_set
for the current process ABI.
Diagnosed and tested by: Peter Jeremy <peterjeremy acm org>
Reviewed by: jhb
MFC after: 1 week
returning POLLHUP instead of POLLIN for several cases. Now, the
tools/regression/poll results for FreeBSD are closer to that of the
Solaris and Linux.
Also, improve the POSIX conformance by explicitely clearing POLLOUT
when POLLHUP is reported in pollscan(), making the fix global.
Submitted by: bde
Reviewed by: rwatson
MFC after: 1 week
using the size of the descriptor array.
- A lock is not needed to fetch fd_lastfile. The results are stale the
instant it is dropped.
- Use a private mutex pool for select since the pool mutex is not used
as a leaf.
- Fetch the si_mtx pointer first before resorting to hashing to compute
the mutex address.
Reviewed by: McKusick
Approved by: re (kib)
specific macros for each audit argument type. This makes it easier to
follow call-graphs, especially for automated analysis tools (such as
fxr).
In MFC, we should leave the existing AUDIT_ARG() macros as they may be
used by third-party kernel modules.
Suggested by: brooks
Approved by: re (kib)
Obtained from: TrustedBSD Project
MFC after: 1 week
fget_unlocked().
- Save old file descriptor tables created on expansion until
the entire descriptor table is freed so that pointers may be
followed without regard for expanders.
- Mark the file zone as NOFREE so we may attempt to reference
potentially freed files.
- Convert several fget_locked() users to fget_unlocked(). This
requires us to manage reference counts explicitly but reduces
locking overhead in the common case.
poll(), only copy out the revents field, not the whole pollfd
structure. Otherwise, if the events field is updated
concurrently by another thread, that update may be lost.
This issue apparently causes problems for the JDK on FreeBSD,
which expects the Linux behavior of not updating all fields
(somewhat oddly, Solaris does not implement the required
behavior, but presumably our adaptation of the JDK is based
on the Linux port?).
MFC after: 2 weeks
PR: kern/130924
Submitted by: Kurt Miller <kurt @ intricatesoftware.com>
Discussed with: kib
poll_no_poll().
Return a poll_no_poll() result from devfs_poll_f() when
filedescriptor does not reference the live cdev, instead of ENXIO.
Noted and tested by: hps
MFC after: 1 week
- Restructure selscan() and selrescan() to avoid producing extra selfps
when we have a fd in multiple sets. As described below multiple selfps
may still exist for other reasons.
- Make selrescan() tolerate multiple selfds for a given descriptor
set since sockets use two selinfos per fd. If an event on each selinfo
fires selrescan() will see the descriptor twice. This could result in
select() returning 2x the number of fds actually existing in fd sets.
Reported by: mgleason@ncftp.com
