Commit Graph

11 Commits

Author SHA1 Message Date
Poul-Henning Kamp
828463d085 Change the chip description from "DFE-550TX" to "DL10050".
The DL10050 chip is used on the 550TX and 580TX cards, probably
others as well.
2002-12-23 21:50:47 +00:00
Doug Ambrisko
740f8a4472 Don't read the PCI config space during mii operations. Instead save whether
or not we have to limit the PHY detection in the softc structure.  Then
just check the flag.

Suggested by:	jdp
Reviewed by:	jdp
MFC after:	3 days
2002-08-19 16:54:26 +00:00
Doug Ambrisko
d44ef39e51 Fixes for the D-Link DFE-580 card.
This is pretty much fixes any issue I can find:
     -  Watchdog timeouts were due to starting the TX DMA engine
        before we had a packet ready for it.  So the first packet
        sent never got out only if we sent more then one packet
        at a time did the others make it out and not blow up.
        Of course reseting the chip then caused us not to transmit
        the first packet again ie. catch-22.  This required logic changes.
     -  Combine interrupts on TX packets being queued up.
     -  Don't keep running around the RX ring since we might get
        out of sync so only go around once per receive
     -  Let the RX engine recover via the poll interface which is
        similar to the TX interface.  This way the chip wakes
        up with no effort when we read enough packets.
     -  Do better hand-shaking on RX & TX packets so they don't
        start of to soon.
     -  Force a duplex setting when the link comes up after
        an ste_init or it will default to half-duplex and be
        really slow.  This only happens on subsequent ste_init.
        The first one worked.
     -  Don't call stat_update for every overflow.  We only monitor
        the collisions so the tick interval is good enough for that.
        Just read in the collision stats to minimize bus reads.
     -  Don't read the miibus every tick since it uses delays and
        delays are not good for performance.
     -  Tie link events directly to the miibus code so the port
        gets set correctly if someone changes the port settings.
     -  Reduce the extreme number of {R,T}FD's.  They would consume
        130K of kernel memory for each NIC.
     -  Set the TX_THRESH to wait for the DMA engine to complete
        before running the TX FIFO.  This hurts peak TX performance
        but under bi-directional load the DMA engine can't keep up
        with the FIFO.  Testing shows that we end up in the case
        anyways (a la dc(4) issues but worse since the RX engine hogs
	everything).
     -  When stopping the card do a reset since the reset verifies the
	card has stopped.  Otherwise on heavy RX load the RX DMA engine
	is still stuffing packets into memory.  If that happens after
	we free the DMA area memory bits get scribled in memory and
	bad things happen.

This card still has seemingly unfixable issues under heavy RX load in
which the card takes over the PCI bus.

Sponsored by:	Vernier Networks
MFC after:	1 week
2002-08-07 22:31:27 +00:00
Bill Paul
645ed1a78b Fix a bug in the ste_setmulti() routine. The NIC has 4 16-bit multicast
hash registers, not 2 32-bit ones. This would prevent the multicasr filter
from being programmed correctly in some cases.
2001-08-23 18:22:55 +00:00
Bosko Milekic
9ed346bab0 Change and clean the mutex lock interface.
mtx_enter(lock, type) becomes:

mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks)
mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized)

similarily, for releasing a lock, we now have:

mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN.
We change the caller interface for the two different types of locks
because the semantics are entirely different for each case, and this
makes it explicitly clear and, at the same time, it rids us of the
extra `type' argument.

The enter->lock and exit->unlock change has been made with the idea
that we're "locking data" and not "entering locked code" in mind.

Further, remove all additional "flags" previously passed to the
lock acquire/release routines with the exception of two:

MTX_QUIET and MTX_NOSWITCH

The functionality of these flags is preserved and they can be passed
to the lock/unlock routines by calling the corresponding wrappers:

mtx_{lock, unlock}_flags(lock, flag(s)) and
mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN
locks, respectively.

Re-inline some lock acq/rel code; in the sleep lock case, we only
inline the _obtain_lock()s in order to ensure that the inlined code
fits into a cache line. In the spin lock case, we inline recursion and
actually only perform a function call if we need to spin. This change
has been made with the idea that we generally tend to avoid spin locks
and that also the spin locks that we do have and are heavily used
(i.e. sched_lock) do recurse, and therefore in an effort to reduce
function call overhead for some architectures (such as alpha), we
inline recursion for this case.

Create a new malloc type for the witness code and retire from using
the M_DEV type. The new type is called M_WITNESS and is only declared
if WITNESS is enabled.

Begin cleaning up some machdep/mutex.h code - specifically updated the
"optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN
and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently
need those.

Finally, caught up to the interface changes in all sys code.

Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
Bill Paul
1e856a7b34 Use device_get_nameunit(dev) as the mutex string when calling
mtx_init() instead of hard-coded string constant. Also remember to do
the mutex changes to the ste driver, which I forgot in the first commit.
2000-10-13 18:35:49 +00:00
Bill Paul
a2c195896a Spruce up the Sundance ST201 driver:
- Convert to using TX descritor polling similar to the xl driver (the
  ST201 is a clone of the 3c90xB chipset and offers the same transmit
  polling scheme). This should reduce TX overhad a little.

- Make sure to reset PHY when switching mode, as in the starfire driver.

- Fix instances of free() that should be contigfree().

- Remove dead code.
1999-12-07 20:14:42 +00:00
Bill Paul
6fe64cb683 Clean up two cases of the alpha vtophys() hack that should be
using alpha_XXX_dmamap() but aren't.
1999-09-18 04:04:03 +00:00
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
Bill Paul
880a970a44 Remove MII/PHY related junk from here. It's not needed anymore. 1999-08-21 19:03:37 +00:00
Bill Paul
23e4757cd7 This commit adds device driver support for the Sundance Technologies ST201
PCI fast ethernet controller. Currently, the only card I know that uses
this chip is the D-Link DFE-550TX. (Don't ask me where to buy these: the
only cards I have are samples sent to me by D-Link.)

This driver is the first to make use of the miibus code once I'm sure
it all works together nicely, I'll start converting the other drivers.

The Sundance chip is a clone of the 3Com 3c90x Etherlink XL design
only with its own register layout. Support is provided for ifmedia,
hardware multicast filtering, bridging and promiscuous mode.
1999-08-21 18:34:58 +00:00