Commit Graph

42 Commits

Author SHA1 Message Date
Warner Losh
00b4e54ae7 We no longer need to use d_thread_t, migrate to struct thread *. 2009-05-20 17:29:21 +00:00
Ed Schouten
0de5b9b0f0 Use si_drv1 instead of dev2unit() in twe(4) and twa(4)
Reviewed by:	scottl
2009-04-14 14:02:43 +00:00
John Baldwin
f7c701d528 Reenable 64-bit DMA for twa(4) controllers, but use a boundary of 4GB to
prevent individual transactions from crossing a 4GB address boundary.  Due
to bus_size_t type limitations, the driver uses a 2GB boundary in PAE
kernels.

Reviewed by:	scottl
MFC after:	1 week
2009-03-23 19:27:23 +00:00
Xin LI
c94526e26d Limit DMA memory to lower addressable 4GB, without this patch, we
can reliably provoke data corruption on systems equipped with a
plenty of memory during high load.

Reported by:	gnn via iXsystems
MFC candidate:	RELENG_7_1, RELENG_7
2008-10-06 22:34:17 +00:00
Ed Schouten
6bfa9a2d66 Replace all calls to minor() with dev2unit().
After I removed all the unit2minor()/minor2unit() calls from the kernel
yesterday, I realised calling minor() everywhere is quite confusing.
Character devices now only have the ability to store a unit number, not
a minor number. Remove the confusion by using dev2unit() everywhere.

This commit could also be considered as a bug fix. A lot of drivers call
minor(), while they should actually be calling dev2unit(). In -CURRENT
this isn't a problem, but it turns out we never had any problem reports
related to that issue in the past. I suspect not many people connect
more than 256 pieces of the same hardware.

Reviewed by:	kib
2008-09-27 08:51:18 +00:00
Scott Long
1b4a3403cd Deferred interrupts don't work yet, disable them.
Submitted by: Manjunath Ranganathaiah
2007-10-12 16:51:22 +00:00
Scott Long
a4820cd2f6 Update to version 3.70.03.007 from the vendor. This adds support for new
SAS-enabled cards.  It also makes the driver MPSAFE, eliminating some
problems that resulted from CAM becoming MPSAFE.  Many thanks to 3Ware/AMCC
for continuing to support FreeBSD.

Submitted by: Manjunath Ranganathaiah
Approved by: re
2007-10-09 17:43:57 +00:00
Scott Long
b50569b71d Prepare for future integration between CAM and newbus. xpt_bus_register
now takes a device_t to be the parent of the bus that is being created.
Most SIMs have been updated with a reasonable argument, but a few exceptions
just pass NULL for now.  This argument isn't used yet and the newbus
integration likely won't be ready until after 7.0-RELEASE.
2007-06-17 05:55:54 +00:00
Scott Long
40ca137bbd Minor update to version 3.70.03.007 2007-05-19 10:12:58 +00:00
Scott Long
4d190d01ab The version string scheme embeds the freebsd major release version,
something that I wasn't aware of with the last import.  Adjust the
string accordingly for 7-CURRENT.
2007-05-10 15:36:58 +00:00
Scott Long
4511a5c893 Import version 3.60.03.006 of the TWA driver:
This patch does the following:

- Remove un-necessary code that is not even compiling into the driver
 under TW_OSL_NON_DMA_MEM_ALLOC_PER_REQUEST defines.
- Remove bundled firmware image and associated "files" entry for tw_cl_fwimg.c
- Remove bundled firmware flashing routines. We now have tw_update userspace
 FreeBSD controller flash utility.
- Fix driver crash on load due to shared interrupt.
- Fix 2 lock leaks for Giant lock.
- Fix CCB leak.
- Add support for 9650SE controllers.

Many thanks to 3Ware/AMCC for continuing to support FreeBSD.
2007-05-09 04:16:32 +00:00
Scott Long
2b83592fdc Remove Giant from CAM. Drivers (SIMs) now register a mutex that CAM will
use to synchornize and protect all data objects that are used for that
SIM.  Drivers that are not yet MPSAFE register Giant and operate as
usual.  RIght now, no drivers are MPSAFE, though a few will be changed
in the coming week as this work settles down.

The driver API has changed, so all CAM drivers will need to be recompiled.
The userland API has not changed, so tools like camcontrol do not need to
be recompiled.
2007-04-15 08:49:19 +00:00
Paolo Pisati
ef544f6312 o break newbus api: add a new argument of type driver_filter_t to
bus_setup_intr()

o add an int return code to all fast handlers

o retire INTR_FAST/IH_FAST

For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current

Reviewed by: many
Approved by: re@
2007-02-23 12:19:07 +00:00
Matt Jacob
bfa5ec2a88 Add MODULE_DEPENDS for cam, pci, mca, eisa and isa where needed.
PR:		106543
Reviewed by:	Adam Radford
MFC after:	3 days
2006-12-11 23:59:42 +00:00
Matt Jacob
bd3fd815a7 2nd and final commit that moves us to CAM_NEW_TRAN_CODE
as the default.

Reviewed by multitudes.
2006-11-02 00:54:38 +00:00
Matt Jacob
fa9ed86506 The first of 3 major steps to move the CAM layer forward to using
the CAM_NEW_TRAN_CODE that has been in the tree for some years now.

This first step consists solely of adding to or correcting
CAM_NEW_TRAN_CODE pieces in the kernel source tree such
that a both a GENERIC (at least on i386) and a LINT build
with CAM_NEW_TRAN_CODE as an option will compile correctly
and run (at least with some the h/w I have).

After a short settle time, the other pieces (making
CAM_NEW_TRAN_CODE the default and updating libcam
and camcontrol) will be brought in.

This will be an incompatible change in that the size of structures
related to XPT_PATH_INQ and XPT_{GET,SET}_TRAN_SETTINGS change
in both size and content. However, basic system operation and
basic system utilities work well enough with this change.

Reviewed by:	freebsd-scsi and specific stakeholders
2006-10-31 05:53:29 +00:00
Poul-Henning Kamp
e5037a18a9 Use utc_offset() where applicable, and hide the internals of it
as static variables.
2006-10-02 18:23:37 +00:00
Poul-Henning Kamp
f645b0b51c First part of a little cleanup in the calendar/timezone/RTC handling.
Move relevant variables to <sys/clock.h> and fix #includes as necessary.

Use libkern's much more time- & spamce-efficient BCD routines.
2006-10-02 12:59:59 +00:00
Scott Long
bdba4eb2d7 Remove header pollution. 2006-04-30 16:46:11 +00:00
Vinod Kashyap
ff1625c61d twa corresponding to the 9.3.0.1 release on the 3ware website. This driver has
support for the 9xxxSX controllers, along with the earlier 9xxxS series
controllers.
2005-11-08 22:51:43 +00:00
Robert Watson
5bb84bc84b Normalize a significant number of kernel malloc type names:
- Prefer '_' to ' ', as it results in more easily parsed results in
  memory monitoring tools such as vmstat.

- Remove punctuation that is incompatible with using memory type names
  as file names, such as '/' characters.

- Disambiguate some collisions by adding subsystem prefixes to some
  memory types.

- Generally prefer lower case to upper case.

- If the same type is defined in multiple architecture directories,
  attempt to use the same name in additional cases.

Not all instances were caught in this change, so more work is required to
finish this conversion.  Similar changes are required for UMA zone names.
2005-10-31 15:41:29 +00:00
David E. O'Brien
ede2033b1f Don't pollute the entire kernel build with -I$S/dev/twa. 2005-09-11 00:52:05 +00:00
Vinod Kashyap
faefda0be0 Acquire Giant before making some CAM calls that need Giant to be held. 2005-06-11 00:14:23 +00:00
Vinod Kashyap
b598979dc9 Make call to tw_cl_deferred_interrupt in twa_poll, not dependent on the
return value from tw_cl_interrupt.
2005-04-29 20:03:20 +00:00
Vinod Kashyap
f0c1dee27f The latest release of the FreeBSD driver (twa) for
3ware's 9xxx series controllers.  This corresponds to
the 9.2 release (for FreeBSD 5.2.1) on the 3ware website.

Highlights of this release are:

1. The driver has been re-architected to use a "Common Layer"
    (all tw_cl* files), which is a consolidation of all OS-independent
    parts of the driver.  The FreeBSD OS specific portions of the
    driver go into an "OS Layer" (all tw_osl* files).
    This re-architecture is to achieve better maintainability, consistency
    of behavior across OS's, and better portability to new OS's (drivers
    for new OS's can be written by just adding an OS Layer that's specific
    to the OS, by complying to a "Common Layer Programming Interface" API.

2. The driver takes advantage of multiple processors.

3. The driver has a new firmware image bundled, the new features of which
   include Online Capacity Expansion and multi-lun support, among others.
   More details about 3ware's 9.2 release can be found here:
   http://www.3ware.com/download/Escalade9000Series/9.2/9.2_Release_Notes_Web.pdf

Since the Common Layer is used across OS's, the FreeBSD specific include
path for header files (/sys/dev/twa) is not part of the #include pre-processor
directive in any of the source files.  For being able to integrate twa into
the kernel despite this, Makefile.<arch> has been changed to add the include
path to CFLAGS.

Reviewed by: scottl
2005-04-12 22:07:11 +00:00
Sam Leffler
4a8bef25fe check copyin+copyout return values when processing TWA_IOCTL_GET_LOCK
Noticed by:	Coverity Prevent analysis tool
2005-03-27 00:29:37 +00:00
Poul-Henning Kamp
bde1a9c98b Kill MAJOR_AUTO 2005-03-17 13:37:28 +00:00
Scott Long
70e83c0d6e Use the correct flags for bus_dma_tag_create(). 2005-03-06 20:56:16 +00:00
Warner Losh
2ece8174c1 Use BUS_PROBE_DEFAULT in preference to 0. Also for vx, return
BUS_PROBE_LOW_PRIORITY in stead of ifdef for devices that xl and vx
both support so that xl will snarf them on up.
2005-03-01 07:50:12 +00:00
Vinod Kashyap
fc01f80ec3 Bumped up the driver version, following recent changes. 2005-02-12 01:16:28 +00:00
Vinod Kashyap
6cc7bd9464 1. Revert back to the way the older driver handled XPT_PATH_INQ. This seems to
fix the problem with device discovery seen by some people.
2. Change to make 3ware CLI/3DM work on amd64.
3. Fix a potential problem that could cause the driver to do strlen(NULL) when
   using older firmware.

Reviewed by:scottl
2005-02-10 18:07:33 +00:00
Vinod Kashyap
5552eed8e5 Changes corresponding to the 9.1.5.2 release of twa on the 3ware website.
The main changes are:
1. Use of multiple bus dma tags.
2. Timing of CAM requests by the driver.
3, Firmware interface change relating to retrieving AEN's.
4. Removal of twa_intrhook.
5. Bundling of latest firmware with BBU capability.

Reviewed by:re
Approved by:re
2005-01-05 19:04:28 +00:00
Vinod Kashyap
44511bd390 Changes to make twa work on amd64.
Reviewed by:re
Approved by:re
2004-08-18 16:14:44 +00:00
Scott Long
c63d83f7c2 Fix a typo that made the busdma tag have a 0 highaddr. This driver heavily
abuses busdma in other ways, and those will likely be fixed another day.
2004-06-24 18:30:08 +00:00
Poul-Henning Kamp
89c9c53da0 Do the dreaded s/dev_t/struct cdev */
Bump __FreeBSD_version accordingly.
2004-06-16 09:47:26 +00:00
Poul-Henning Kamp
fe12f24bb0 Add missing <sys/module.h> includes 2004-05-30 20:08:47 +00:00
Vinod Kashyap
5bc4169411 Undid scottl's recent changes. 2004-05-17 17:16:58 +00:00
Scott Long
f3a537ca3f Remove twa_intrhook prototype.
Submitted by:	cperciva
2004-05-15 15:41:59 +00:00
Scott Long
e25b7fccd4 Set the cpi.hba_inquiry field to something useful. 2004-05-15 05:18:05 +00:00
Scott Long
bd4c922777 Remove the config_intrhook as it is not needed. 2004-05-15 05:17:42 +00:00
Dag-Erling Smørgrav
4cdc9a643e Unbreak LINT on 64-bit platforms. Note that this code is not style(9)-
compliant, but I'll leave that for someone else.

Noticed by:	tinderbox
Pointy hat to:	the usual suspects
2004-04-02 15:09:57 +00:00
Vinod Kashyap
99635d6cdd Initial check-in of the device driver for 3ware's 9000 series
PATA/SATA RAID controllers.  This driver is a SIM under CAM, and
so, behaves like a driver for a SCSI controller.
2004-03-30 03:46:00 +00:00