Commit Graph

58 Commits

Author SHA1 Message Date
Alan Somers
4195c7de24 Always null-terminate ccb_pathinq.(sim_vid|hba_vid|dev_name)
The sim_vid, hba_vid, and dev_name fields of struct ccb_pathinq are
fixed-length strings. AFAICT the only place they're read is in
sbin/camcontrol/camcontrol.c, which assumes they'll be null-terminated.
However, the kernel doesn't null-terminate them. A bunch of copy-pasted code
uses strncpy to write them, and doesn't guarantee null-termination. For at
least 4 drivers (mpr, mps, ciss, and hyperv), the hba_vid field actually
overflows. You can see the result by doing "camcontrol negotiate da0 -v".

This change null-terminates those fields everywhere they're set in the
kernel. It also shortens a few strings to ensure they'll fit within the
16-character field.

PR:		215474
Reported by:	Coverity
CID:		1009997 1010000 1010001 1010002 1010003 1010004 1010005
CID:		1331519 1010006 1215097 1010007 1288967 1010008 1306000
CID:		1211924 1010009 1010010 1010011 1010012 1010013 1010014
CID:		1147190 1010017 1010016 1010018 1216435 1010020 1010021
CID:		1010022 1009666 1018185 1010023 1010025 1010026 1010027
CID:		1010028 1010029 1010030 1010031 1010033 1018186 1018187
CID:		1010035 1010036 1010042 1010041 1010040 1010039
Reviewed by:	imp, sephe, slm
MFC after:	4 weeks
Sponsored by:	Spectra Logic Corp
Differential Revision:	https://reviews.freebsd.org/D9037
Differential Revision:	https://reviews.freebsd.org/D9038
2017-01-04 20:26:42 +00:00
Justin Hibbits
f8fd3fb518 Fix the resource_list_print_type() calls to use uintmax_t.
Missed a bunch from r297000.
2016-03-22 22:25:08 +00:00
Svatopluk Kraus
a1e1814d76 As <machine/pmap.h> is included from <vm/pmap.h>, there is no need to
include it explicitly when <vm/pmap.h> is already included.

Reviewed by:	alc, kib
Differential Revision:	https://reviews.freebsd.org/D5373
2016-02-22 09:02:20 +00:00
Justin Hibbits
a721585d27 Another conversion u_long -> rman_res_t 2016-02-16 21:30:55 +00:00
Michal Meloun
cdf4ec6873 EHCI: Make core reset and port speed reading more generic.
Use driver settable callbacks for handling of:
- core post reset
- reading actual port speed

Typically, OTG enabled EHCI cores wants setting of USBMODE register,
but this register is not defined in EHCI specification and different
cores can have it on different offset.

Also, for cores with TT extension, actual port speed must be determinable.
But again, EHCI specification not covers this so this patch provides
function for two most common variant of speed bits layout.

Reviewed by: hselasky
Differential Revision: https://reviews.freebsd.org/D5088
2016-01-28 14:11:59 +00:00
Hans Petter Selasky
a985ae9b4a Add support for USB display link adapters to the FB and VT drivers.
The vtophys() function is used to get the physical page address for
the virtually allocated frame buffers when a physically continuous
memory area is not available. This change also allows removing the
masking of the FB_FLAG_NOMMAP flag in the PS3 syscons driver.

The FB and VT drivers were tested using X.org/xf86-video-scfb and
syscons.
2015-03-07 20:45:15 +00:00
Nathan Whitehorn
827cc9b981 New pmap implementation for 64-bit PowerPC processors. The main focus of
this change is to improve concurrency:
- Drop global state stored in the shadow overflow page table (and all other
  global state)
- Remove all global locks
- Use per-PTE lock bits to allow parallel page insertion
- Reconstruct state when requested for evicted PTEs instead of buffering
  it during overflow

This drops total wall time for make buildworld on a 32-thread POWER8 system
by a factor of two and system time by a factor of three, providing performance
20% better than similarly clocked Core i7 Xeons per-core. Performance on
smaller SMP systems, where PMAP lock contention was not as much of an issue,
is nearly unchanged.

Tested on:	POWER8, POWER5+, G5 UP, G5 SMP (64-bit and 32-bit kernels)
Merged from:	user/nwhitehorn/ppc64-pmap-rework
Looked over by:	jhibbits, andreast
MFC after:	3 months
Relnotes:	yes
Sponsored by:	FreeBSD Foundation
2015-02-24 21:37:20 +00:00
Nathan Whitehorn
0a9ce08bc9 Allow use of higher-resolution (e.g. 1920x1080) framebuffers on PS3.
MFC after:	1 month
2015-02-22 02:59:53 +00:00
Hans Petter Selasky
b217d18412 Add 64-bit DMA support in the XHCI controller driver.
- Fix some comments and whitespace while at it.

MFC after:	1 month
Submitted by:	marius@
2015-01-05 20:22:18 +00:00
Nathan Whitehorn
fd520b6e21 Use FDT properties to identify a PS3 if present. 2015-01-05 01:05:35 +00:00
Nathan Whitehorn
f1d2752f31 Make PS3 work with the userspace kboot loader. loader.ps3 will disappear
from the tree in the near future.

Done at:	Hackathon
2015-01-05 00:50:16 +00:00
Gleb Smirnoff
e2efa70e1c Mechanically convert to if_inc_counter(). 2014-09-19 09:20:34 +00:00
Jean-Sébastien Pédron
1365d0770d vt(4): Use vt_fb_drawrect() and vt_fb_setpixel() in all vt_fb-derivative
Review:		https://reviews.freebsd.org/D789
Reviewed by:	nwhitehorn
Approved by:	nwhitehorn
MFC after:	2 days
2014-09-16 18:02:24 +00:00
Jean-Sébastien Pédron
631bb572ba vt(4): Add vd_bitblt_bmp_t callback
The code was already there in all backends, we just expose it. This is
used to display the splash screen.

MFC after:	1 week
2014-08-23 20:35:33 +00:00
Jean-Sébastien Pédron
c285e4a5e9 vt_fb: Implement vd_bitblt_text_t for vt_fb and derivatives
MFC after:	1 week
2014-08-23 15:00:47 +00:00
Jean-Sébastien Pédron
ca885fdfde Fix two files forgotten in r269783 (vt_generate_cons_palette)
Reported by:	bz
MFC after:	1 week
MFC with:	269783
2014-08-10 22:24:14 +00:00
Nathan Whitehorn
0f3ec4da2f Retire vd_maskbitbltchr. The same functionality can be obtained by testing
for mask != NULL in vd_bitbltchr, which all implementations of vd_bitbltchr()
were doing anyway.
2014-08-07 21:00:16 +00:00
Nathan Whitehorn
9ed297c83c Retire various intertwined bits of fbd(4) and vt_fb, in particular the
pixel modification indirection. No actual drivers use it and those that
might (e.g. creatorfb) use custom implementations of vd_bitbltchr().
2014-08-06 00:35:48 +00:00
Nathan Whitehorn
31411fea11 Fix allocation of 128MB extended memory region, broken since some careless
modifications in December.

MFC after:	3 days
2014-07-20 00:08:50 +00:00
Nathan Whitehorn
3ddad7da27 Enable X11 via xf86-video-scfb on the Playstation 3. This commit made from
an xterm running for the first time on said Playstation.
2014-07-19 23:39:17 +00:00
Nathan Whitehorn
0c50edff52 Repair some races in IPI handling:
1. Make sure IPI mask is set before sending the IPI
2. Operate atomically on PS3 PIC outstanding interrupt list
3. Make sure IPIs are EOI'ed before, not after, processing. Without this,
   a second IPI could be sent partway through processing the first one,
   get erroneously acknowledge by the EOI to the first, and be lost. In
   particular in the case of smp_rendezvous(), this can be fatal.

In combination, this makes the PS3 boot SMP again. It probably also fixes
some latent bugs elsewhere.

MFC after:	2 weeks
2014-05-12 02:56:27 +00:00
Nathan Whitehorn
0d1381bb56 Fix interrupt allocation after changes to nexus. This makes PS3 boot
multiuser again (this commit comes from the PS3 itself). Some problems
still exist with SMP, apparently, as I had to boot a non-SMP kernel to
get here.
2014-05-11 16:49:31 +00:00
Nathan Whitehorn
49588d0fac Move the PS3 framebuffer console to use vt instead of syscons and adjust
GENERIC64 for PowerPC to use vt with it.

Much to my chagrin, PS3 support seems to have bitrotted somewhat since the
last time I tried it. ehci panics on attach and interrupt handling seems
to be faulty. This should be fixed soon...
2014-05-11 05:49:35 +00:00
Nathan Whitehorn
c1cb22d755 Rearchitect platform memory map parsing to make it less
Open Firmware-centric:
- Keep the static list of regions in platform.c instead of ofw_machdep.c
- Move various merging and sorting operations to platform.c as well
- Move apple_hacks code out of ofw_machdep.c and into platform_powermac.c,
  where it belongs
- Move CHRP-specific dynamic-reconfiguration memory parsing into
  platform_chrp.c instead of pretending it is shared code
2013-12-01 19:43:15 +00:00
Gleb Smirnoff
66e01d73cd - Provide necessary includes.
- Remove unnecessary includes.

Sponsored by:	Netflix
Sponsored by:	Nginx, Inc.
2013-10-29 11:17:49 +00:00
Nathan Whitehorn
59b5b8941b Changes to CAM or busdma have caused SIMs to be sent 0-length CCBs on
occasion. This resulted in zero mapped segments, triggering an assert in
the PS3 CDROM driver. Allow no DMA for 0-length transfers.

Approved by:	re (glebius)
MFC after:	1 week
2013-09-29 20:10:22 +00:00
Davide Italiano
acccf7d8b4 MFcalloutng:
When CPU becomes idle, cpu_idleclock() calculates time to the next timer
event in order to reprogram hw timer. Return that time in sbintime_t to
the caller and pass it to acpi_cpu_idle(), where it can be used as one
more factor (quite precise) to extimate furter sleep time and choose
optimal sleep state. This is a preparatory change for further callout
improvements will be committed in the next days.

The commmit is not targeted for MFC.
2013-02-28 10:46:54 +00:00
Attilio Rao
590f9303e5 Merge from vmobj-rwlock branch:
Remove unused inclusion of vm/vm_pager.h and vm/vnode_pager.h.

Sponsored by:	EMC / Isilon storage division
Tested by:	pho
Reviewed by:	alc
2013-02-26 01:00:11 +00:00
Rui Paulo
eaba9848dd Introduce PLATFORMMETHOD_END and use it. 2013-02-13 02:21:45 +00:00
Konstantin Belousov
dd0b4fb6d5 Reform the busdma API so that new types may be added without modifying
every architecture's busdma_machdep.c.  It is done by unifying the
bus_dmamap_load_buffer() routines so that they may be called from MI
code.  The MD busdma is then given a chance to do any final processing
in the complete() callback.

The cam changes unify the bus_dmamap_load* handling in cam drivers.

The arm and mips implementations are updated to track virtual
addresses for sync().  Previously this was done in a type specific
way.  Now it is done in a generic way by recording the list of
virtuals in the map.

Submitted by:	jeff (sponsored by EMC/Isilon)
Reviewed by:	kan (previous version), scottl,
	mjacob (isp(4), no objections for target mode changes)
Discussed with:	     ian (arm changes)
Tested by:	marius (sparc64), mips (jmallet), isci(4) on x86 (jharris),
	amd64 (Fabian Keil <freebsd-listen@fabiankeil.de>)
2013-02-12 16:57:20 +00:00
Gleb Smirnoff
eb1b1807af Mechanically substitute flags from historic mbuf allocator with
malloc(9) flags within sys.

Exceptions:

- sys/contrib not touched
- sys/mbuf.h edited manually
2012-12-05 08:04:20 +00:00
John Baldwin
831ce4cb3d - Change contigmalloc() to use the vm_paddr_t type instead of an unsigned
long for specifying a boundary constraint.
- Change bus_dma tags to use bus_addr_t instead of bus_size_t for boundary
  constraints.

These allow boundary constraints to be fully expressed for cases where
sizeof(bus_addr_t) != sizeof(bus_size_t).  Specifically, it allows a
driver to properly specify a 4GB boundary in a PAE kernel.

Note that this cannot be safely MFC'd without a lot of compat shims due
to KBI changes, so I do not intend to merge it.

Reviewed by:	scottl
2012-03-01 19:58:34 +00:00
Nathan Whitehorn
8fd26abad8 Avoid warnings about duplicate modules.
MFC after:	2 weeks
2012-02-04 19:50:26 +00:00
Nathan Whitehorn
f7952747f6 Pick a constant high IRQ value for the PS3 IPI, which lets PS3 devices be
usefully loaded and unloaded as modules.

Submitted by:	geoffrey dot levand at mail dot ru
MFC after:	2 weeks
2012-01-15 18:26:43 +00:00
Nathan Whitehorn
6e3a3fe377 Now that we can tolerate LPAR context switches on the PS3 hypervisor, going
to hypervisor-idle on both threads will not hang the kernel.
2012-01-15 16:57:18 +00:00
Nathan Whitehorn
263b790117 Support infrastructure for X11 on PS3.
Submitted by:	geoffrey dot levand at mail dot ru
MFC after:	1 week
2011-12-18 16:53:21 +00:00
Nathan Whitehorn
795c0232aa Add version header to output file. 2011-12-18 16:53:03 +00:00
Hans Petter Selasky
2e14174893 Implement better support for USB controller suspend and resume.
This patch should remove the need for kldunload of USB
controller drivers at suspend and kldload of USB controller
drivers at resume.

This patch also fixes some build issues in avr32dci.c

MFC after:	2 weeks
2011-12-14 00:28:54 +00:00
Marius Strobl
4b7ec27007 - There's no need to overwrite the default device method with the default
one. Interestingly, these are actually the default for quite some time
  (bus_generic_driver_added(9) since r52045 and bus_generic_print_child(9)
  since r52045) but even recently added device drivers do this unnecessarily.
  Discussed with: jhb, marcel
- While at it, use DEVMETHOD_END.
  Discussed with: jhb
- Also while at it, use __FBSDID.
2011-11-22 21:28:20 +00:00
Nathan Whitehorn
dad7a7d1c6 The PPC IRQ layer assumes that the IPI IRQ is the last IRQ on the PIC.
This assumption is invalid and the code should be fixed, but humor it for
now and set the "IPI" for PS3s in the non-SMP case to a large number. This
fixes boot with a non-SMP kernel.

Submitted by:	geoffrey dot levand at mail dot ru
MFC after:	1 week
2011-11-21 04:35:23 +00:00
Ed Schouten
6472ac3d8a Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs.
The SYSCTL_NODE macro defines a list that stores all child-elements of
that node. If there's no SYSCTL_DECL macro anywhere else, there's no
reason why it shouldn't be static.
2011-11-07 15:43:11 +00:00
Kenneth D. Merry
1cc052e80f Add descriptor sense support to CAM, and honor sense residuals properly in
CAM.

Desriptor sense is a new sense data format that originated in SPC-3.  Among
other things, it allows for an 8-byte info field, which is necessary to
pass back block numbers larger than 4 bytes.

This change adds a number of new functions to scsi_all.c (and therefore
libcam) that abstract out most access to sense data.

This includes a bump of CAM_VERSION, because the CCB ABI has changed.
Userland programs that use the CAM pass(4) driver will need to be
recompiled.

camcontrol.c:	Change uses of scsi_extract_sense() to use
		scsi_extract_sense_len().

		Use scsi_get_sks() instead of accessing sense key specific
		data directly.

scsi_modes:	Update the control mode page to the latest version (SPC-4).

scsi_cmds.c,
scsi_target.c:	Change references to struct scsi_sense_data to struct
		scsi_sense_data_fixed.  This should be changed to allow the
		user to specify fixed or descriptor sense, and then use
		scsi_set_sense_data() to build the sense data.

ps3cdrom.c:	Use scsi_set_sense_data() instead of setting sense data
		manually.

cam_periph.c:	Use scsi_extract_sense_len() instead of using
		scsi_extract_sense() or accessing sense data directly.

cam_ccb.h:	Bump the CAM_VERSION from 0x15 to 0x16.  The change of
		struct scsi_sense_data from 32 to 252 bytes changes the
		size of struct ccb_scsiio, but not the size of union ccb.
		So the version must be bumped to prevent structure
		mis-matches.

scsi_all.h:	Lots of updated SCSI sense data and other structures.

		Add function prototypes for the new sense data functions.

		Take out the inline implementation of scsi_extract_sense().
		It is now too large to put in a header file.

		Add macros to calculate whether fields are present and
		filled in fixed and descriptor sense data

scsi_all.c:	In scsi_op_desc(), allow the user to pass in NULL inquiry
		data, and we'll assume a direct access device in that case.

		Changed the SCSI RESERVED sense key name and description
		to COMPLETED, as it is now defined in the spec.

		Change the error recovery action for a number of read errors
		to prevent lots of retries when the drive has said that the
		block isn't accessible.  This speeds up reconstruction of
		the block by any RAID software running on top of the drive
		(e.g. ZFS).

		In scsi_sense_desc(), allow for invalid sense key numbers.
		This allows calling this routine without checking the input
		values first.

		Change scsi_error_action() to use scsi_extract_sense_len(),
		and handle things when invalid asc/ascq values are
		encountered.

		Add a new routine, scsi_desc_iterate(), that will call the
		supplied function for every descriptor in descriptor format
		sense data.

		Add scsi_set_sense_data(), and scsi_set_sense_data_va(),
		which build descriptor and fixed format sense data.  They
		currently default to fixed format sense data.

		Add a number of scsi_get_*() functions, which get different
		types of sense data fields from either fixed or descriptor
		format sense data, if the data is present.

		Add a number of scsi_*_sbuf() functions, which print
		formatted versions of various sense data fields.  These
		functions work for either fixed or descriptor sense.

		Add a number of scsi_sense_*_sbuf() functions, which have a
		standard calling interface and print the indicated field.
		These functions take descriptors only.

		Add scsi_sense_desc_sbuf(), which will print a formatted
		version of the given sense descriptor.

		Pull out a majority of the scsi_sense_sbuf() function and
		put it into scsi_sense_only_sbuf().  This allows callers
		that don't use struct ccb_scsiio to easily utilize the
		printing routines.  Revamp that function to handle
		descriptor sense and use the new sense fetching and
		printing routines.

		Move scsi_extract_sense() into scsi_all.c, and implement it
		in terms of the new function, scsi_extract_sense_len().
		The _len() version takes a length (which should be the
		sense length - residual) and can indicate which fields are
		present and valid in the sense data.

		Add a couple of new scsi_get_*() routines to get the sense
		key, asc, and ascq only.

mly.c:		Rename struct scsi_sense_data to struct
		scsi_sense_data_fixed.

sbp_targ.c:	Use the new sense fetching routines to get sense data
		instead of accessing it directly.

sbp.c:		Change the firewire/SCSI sense data transformation code to
		use struct scsi_sense_data_fixed instead of struct
		scsi_sense_data.  This should be changed later to use
		scsi_set_sense_data().

ciss.c:		Calculate the sense residual properly.  Use
		scsi_get_sense_key() to fetch the sense key.

mps_sas.c,
mpt_cam.c:	Set the sense residual properly.

iir.c:		Use scsi_set_sense_data() instead of building sense data by
		hand.

iscsi_subr.c:	Use scsi_extract_sense_len() instead of grabbing sense data
		directly.

umass.c:	Use scsi_set_sense_data() to build sense data.

		Grab the sense key using scsi_get_sense_key().

		Calculate the sense residual properly.

isp_freebsd.h:	Use scsi_get_*() routines to grab asc, ascq, and sense key
		values.

		Calculate and set the sense residual.

MFC after:	3 days
Sponsored by:	Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
Nathan Whitehorn
9f2c359f16 Add support for the Blu-Ray drive found in the Sony Playstation 3 and fix
some realted minor bugs in PS3 internal storage support.

Submitted by:	glevand <geoffrey.levand@mail.ru>
Approved by:	re (bz)
2011-08-14 00:20:37 +00:00
Nathan Whitehorn
534c6b8916 Follow Linux by unconditionally stripping the RX vlan tag from incoming
packets. It turns out that all firmware versions insert it, whether or not
they support VLAN tagging.

Submitted by:	glevand <geoffrey.levand at mail dot ru>
2011-07-05 15:00:55 +00:00
Nathan Whitehorn
f574af0d6d Use atomic operations to mask and unmask IRQs. This prevents a problem
(obvious in retrospect) in which interrupts on one CPU that are temporarily
masked can end up permanently masked when a handler on another CPU clobbers
the interrupt mask register with an old copy.
2011-06-23 04:35:45 +00:00
Nathan Whitehorn
1c167648c9 Use 4 KB pages for storage bus devices, which seems to be what the HV uses
internally.
2011-06-23 04:06:33 +00:00
Nathan Whitehorn
98934b1fd5 Rework the PS3 disk driver to support NCQ and do its DMA a little
differently.
2011-06-23 03:37:25 +00:00
Nathan Whitehorn
67de2cd330 Add hypervisor call error codes. 2011-06-23 03:20:11 +00:00
Nathan Whitehorn
cb705160c6 This is more complicated than I expected. Storage devices need the IOMMU
set up, but must not use it.
2011-06-22 02:23:18 +00:00
Nathan Whitehorn
32638a3a01 The IOMMU is not involved for the storage bus. 2011-06-22 02:11:42 +00:00