creating new ones by destroying any geom that may have come into
existence immediately after adding a partition. The EBR partition scheme
is particularly enthusiastic about false positives in this case.
MFC after: 3 days
container partitions, which didn't do anything anyway, and check for
an existing freebsd-boot partition before bothering the user to make one.
PR: bin/160931
MFC after: 3 days
order to make every operation of the partition editor fully revertable.
Under *no circumstances* will it any longer touch the disks until the user
presses Finish and confirms it.
MFC after: 3 days
digit beyond your time.
Various sysinstall dependencies (e.g. libftpio, libdisk, libodialog, etc.)
will be cleaned up in coming days. Some will take longer than others due to
a few other consumers (tzsetup and sade).
As of FreeBSD 6, devices can only be opened through devfs. These device
nodes don't have major and minor numbers anymore. The st_rdev field in
struct stat is simply based a copy of st_ino.
Simply display device numbers as hexadecimal, using "%#jx". This is
allowed by POSIX, since it explicitly states things like the following
(example taken from ls(1)):
"If the file is a character special or block special file, the
size of the file may be replaced with implementation-defined
information associated with the device in question."
This makes the output of these commands more compact. For example, ls(1)
now uses approximately four columns less. While there, simplify the
column length calculation from ls(1) by calling snprintf() with a NULL
buffer.
Don't be afraid; if needed one can still obtain individual major/minor
numbers using stat(1).
When a status pointer is passed in mfi_dcmd_command does not return an
errno (if the ioctl is successful), so move the test for NO_HW_PRESENT
outside of the error case. This should fix incorrect reporting for
systems with a dead or no battery.
Additionally, handle error codes other than NO_HW_PRESENT by omitting
the battery capacity display. LSI's supercap-based parts (CV series)
report their data using the same interface as battery-based parts,
except that they do not include the capacity stats (state of charge,
cumulative charge cycles, etc.)
Reviewd by: jhb, bz
Tested by: pluknet@, Garrett Cooper
PR: bin/160581
MFC after: 1 week
clean-up RA messages for shutting down. The RA timers could prevent the rtadvd
daemon from shutting down because ra_output() just ignored !IFF_UP interfaces
and TRANSITIVE->UNCONFIGURED state transition never happened due to it.
Spotted by: kib
Approved by: re (bz)
Improve exit when an error occurs.
Fix parsing to grab values which contain extra '=' signs.
Fix a bug setting the timezone properly.
Fix a usage bug when setting up with gmirror.
Allow a uzip file from local media to be used.
Allow specifying flags for "newfs" when using UFS as the file system.
Run custom commands after doing final cleanup / fstab generation
and such. Also fix using relative path for config file.
Approved by: re (bz)
not configure the host's networking if netbooted [1]. Also fix FTP
installations behind some firewalls [2].
PR: bin/159583 [2]
Reported by: stas [1]
Approved by: re (kib)
It appears this was already done in NetBSD a decade ago, hence
I just reuse the change (except our code is bad styled).
PR: bin/160516
Approved by: portmgr
Approved by: re (kib)
Obtained from: NetBSD
wpa_supplicant.conf(5). Up to now, the PSK was truncated
to 15 characters (the length of the input field).
PR: 159559
Submitted by: Gavin Chappell <gavin.chappell@gmail.com>
Approved by: re (kib)
- Add -u option to enable adding :[RA-source-address] to the interface id.
(r223149)
- s/INET6_ADDRSTRLEN/sizeof(ntopbuf)/ (r223149)
- Fix a bug that can prevent -D from being overridden by -d. (r223149)
- /-P pidfile/-p pidfile/ for consistency with rtadvd(8). (r223149)
- Fix -F flag handling to support receiving RAs even when ip6.forwarding=1.
(r225150)
Approved by: re (kib)
- Fix an abnormal termination caused by twice of "rtadvctl disable". (r224303)
- Use poll() to wait for the control message socket instead of a spin loop.
(r224304)
- s/cmsg_/cm_/ to avoid conflict with CMSG_* symbols for struct cmsghdr.
(r224619)
- Ignore an interface that never sent RAs for graceful shut-down. (r224620)
- Refine log messages. (r225148)
- Fix SIGSEGV when receiving RAs that contain RDNSS and/or DNSSL options.
(r225149)
Approved by: re (kib)
1) if no default gateway is given the route command will fail
and the script will abort with an error leading to an endless
loop unless configuration is cancelled or changed. [1]
2) In the IPv6 case add -inet6 to not alter the legacy IP default
route.
Reported by: Oleg Ginzburg (olevole olevole.ru) [1]
Tested by: Oleg Ginzburg (olevole olevole.ru) [1]
Approved by: re (kib)
and use a loop so that multiple cache commands can be strung together on
the command line into a single update to the volume's properties.
Reviewed by: bz
Approved by: re (kib)
MFC after: 1 week
This follows what the output of make targets looks like, and reduces the
number of directories needed on the FTP server, since we now have only one
architecture with multiple machine types (i386, which has i386 and pc98),
but 3 machines with 9 architectures between them (powerpc, mips, and arm).
Requested by: kensmith, bz
Approved by: re(kensmith)
new line after the pd state information as well, so move it to the outside
of the block.
Submitted by: Mark Johnston at Sandvine Inc
MFC atfer: 3 days
Approved by: re (kib)
o cd9960 -> cd9660
o Move inclusion of sys/endian.h from cd9660_eltorito.c to cd9660.h
since actual user is not cd9660_eltorito.c but iso.h and
cd9660_eltorito.h.
Actually, include order/place of sys/endian.h doesn't matter on
netbsd since it is always included by sys/types.h but it's not
true on other system. This should fix cross build breakage on
freebsd introduced by rev. 1.16 of cd9660_eltorito.c.
Problem reported and fix suggested on twitter.
o Fix fd leaks in error cases. Found by cppcheck.
o RRIP RE length should be 4, not 0
o Apply fixes for PR bin/44114 (makefs(8) -t cd9660 -o rockridge creates
corrupted cd9660fs), iso9660_rrip.c part:
- cd9660_rrip_finalize_node() should check rr_real_parent in node->parent,
not in node itself in RRIP_PL case
- cd9660_rrip_initialize_node() should update only node passed as arg
so handle RRIP_PL in DOTDOT case
Fixes malformed dotdot entries in deep (more than 8 level) directories
moved into .rr_moved dir.
Should be pulled up to netbsd-5.
(no official ISO has such deep dirs, but cobalt restorecd is affected)
Reviewed by: mm
Approved by: re (kib)
Obtained from: NetBSD
MFC after: 3 days
In -p mode install the group file with the same permissions as normally
done in etc/Makefile.
Update the copyright.
Requested by: peter [1]
Approved by: re (kib)
ints. That fixes a first bug where pmcstat wasn't using the old
cpumask_t interface and now also brings the full support for more
than 32 cpus.
While here, make the functions pmcstat_clone_event_descriptor() and
pmcstat_get_cpumask() private to pmcstat.
The problem of assuming cpu dense masks still persists and should be
eventually fixed, as reported by avg.
Tested by: pluknet
Reviewed by: gnn
Approved by: re (kib)
makefs with -t cd9660 -o rockridge against directories with
deep structure creates a corrupted cd9660 image.
http://gnats.netbsd.org/cgi-bin/query-pr-single.pl?number=44114
Fix NetBSD PR bin/45217:
makefs creates ISO9660 images that violate the ECMA-119 (ISO9660)
specification. This is caused by erroneously writing 32 bytes
with value 0x20 to the volume_set_id field and 128 bytes with value 0x20
to the the following 37-byte fields in the PVD:
copyright_file_id, abstract_file_id, bibliographic_file_id
This causes, among other unwanted results the reserved4 field to be
overwritten with the value 0x20. To comply with the specification,
this field muse be zero. As a result, all FreeBSD distribution
images created with makefs have not been 100% valid ISO9660 files.
http://gnats.netbsd.org/cgi-bin/query-pr-single.pl?number=45217
Reviewed by: kientzle
Approved by: re (kib)
Obtained from: NetBSD
MFC after: 3 days
historic behavior (create the default base directory in pw.conf) before
I came up with a better fix for this.
Requested by: nwhitehorn
Approved by: re (kib)
data when 'show drives' succeeds, often resulting in a failing exit code
even though the command worked fine.
Reviewed by: bz
Approved by: re (kib)
MFC after: 3 days
recommended to allow root users in the jail to access the host system.
PR: docs/156853
Submitted by: crees
Patch by: crees
Approved by: re (kib) for BETA1
you were stuck in an endless loop.
Reported by: kensmith
Approved by: re (kib) for BETA1
Pointy hat to: bz - wonder why I had not tested legacy IP thoroughly..
