Commit Graph

123 Commits

Author SHA1 Message Date
Bernhard Schmidt
0f7a9c77e3 On state changes from RUN to anything else the AGGR sessions are
cleared/dropped leading to qid2tap[n] being NULL as there no longer
is a tap. Now, if there have been lots of frames queued the firmware
processes and returns those after the tap is gone.

Tested by:	osa
MFC after:	1 week
2012-01-27 17:39:02 +00:00
Bernhard Schmidt
3e51210689 Don't rely on MCS7 being at index 7 while determining the amount
of antennas to use. Not all APs enable all MCS rates.

Poked by:	Lucius Windschuh <lwindschuh at googlemail dot com>
MFC after:	1 week
2012-01-03 09:42:31 +00:00
Bernhard Schmidt
fcd9500f91 Fix some net80211 enum nits:
- ic_vap_create() uses an ieee80211_opmode argument
- ieee80211_rate2media() takes an ieee80211_phymode argument
- ieee80211_plcp2rate() takes an ieee80211_phytype argument
- cast to enum ieee80211_protmode and ieee80211_roamingmode to silence
  compiler warnings

Submitted by:	arundel@
2011-12-17 10:23:17 +00:00
Bernhard Schmidt
26ddc9835a The DC calibration result obtained during initialization can't be
passed over to the runtime firmware on 6050 devices. Instead let
the runtime firmware do the calibration itself. This fixes support
for the 6050 series devices.

Obtained from:	OpenBSD
Submitted by:	kevlo
Tested by:	lx, Tz-Huan Huang(earlier version)
2011-11-21 22:19:12 +00:00
Bernhard Schmidt
80abcbf807 Let net80211 also know about stopped BA sessions. This fixes some issues
where the driver assumed that BA resources are still available due to
net80211 saying so.

PR:		161407, 159768
Tested by:	cperciva, rene
MFC after:	3 days
2011-10-24 07:37:01 +00:00
Bernhard Schmidt
a7978bab76 Fix bmiss notifications, events should be sent when NOT scanning.
MFC after:	3 days
2011-10-13 18:17:03 +00:00
Marius Strobl
a131219c6e Recognize the Intel(R) Centrino(R) Wireless-N 130.
PR:	161162
2011-10-09 21:36:14 +00:00
Adrian Chadd
f3536faf94 Manually set the channel when using monitor mode - the firmware
doesn't select it automatically.

Submitted by:	nox
Reviewed by:	bschmidt
Approved by:	re
PR:		kern/160815
2011-09-20 04:30:23 +00:00
Bernhard Schmidt
19da774130 Make sure to drop the IEEE80211_RATE_BASIC flag even for MCS rates.
Reported by:	Maciej Milewski <milu at dat dot pl>
Tested by:	Maciej Milewski <milu at dat dot pl>
2011-06-10 17:06:25 +00:00
Bernhard Schmidt
de9358edc6 Enable HT40 (40MHz channel width) support. 2011-06-04 15:22:01 +00:00
Bernhard Schmidt
98b4acc4c3 Only consider QoS frames for TX packet aggregation. 2011-06-04 11:56:20 +00:00
Bernhard Schmidt
bf6998c568 The firmware of 4965 series adapters seems to die while trying to send
probe requests at 1Mbps while being associated on a 5GHz channel. Sending
those at 6Mbps does work, so use that instead during a background scan.
This workaround allows us to re-enable background scan support for the
4965 adapters.

Also, just enabling one antenna on 5GHz results in better reception of
beacons:
test            00:26:5a:c6:14:1a   40   54M -71:-95  200 E    WME HTCAP ATH
vs
test            00:26:5a:c6:14:1a   40   54M -92:-95  200 E    WME HTCAP ATH
Due to roam:rssi thresholds set to 7 by default it might have been
impossible to associate to that network. While here use
IEEE80211_IS_CHAN_5GHZ() to determine the band.
2011-06-04 11:43:09 +00:00
Bernhard Schmidt
129145a426 Add module version to iwi/ipw/wpi and iwn.
The version is used to check if a module is already preset, not setting
it results in:

can't re-use a leaf (ipw)!
module_register: module pci/ipw already exists!
Module pci/ipw failed to register: 17

while trying to load the module due to an entry in loader.conf. With this
commit we get the expected:

module ipw already present!

Reported by:	Dru Lavigne, bz
Tested by:	bz
MFC after:	1 week
2011-05-31 19:08:25 +00:00
Bernhard Schmidt
4f6760821e Only update the scheduler's byte count table for aggregation queues.
The other queues, especially the command queue, uses the FIFO mode
which doesn't require the byte count table because queued entries are
processed in order.

Pointed out by:	Lucius Windschuh <lwindschuh at googlemail dot com>
2011-05-15 08:09:36 +00:00
Bernhard Schmidt
7d3ddebe0a Enable 11n (sans HT40) support. 2011-05-08 12:23:01 +00:00
Bernhard Schmidt
b5d2f6bf26 Notify firmware about various HT parameters once associated. 2011-05-08 12:11:20 +00:00
Bernhard Schmidt
97fadf57df Add support for TX packet aggregation. 2011-05-08 12:06:12 +00:00
Bernhard Schmidt
b2ad04c708 Add support for RX packet aggregation. 2011-05-08 11:58:23 +00:00
Bernhard Schmidt
fa818eae51 Add support for transmitting frames at MCS rates. 2011-05-08 11:54:38 +00:00
Bernhard Schmidt
1647639a26 Prepare for transmitting frames at MCS rates:
- instead of calling iwn_plcp_signal() for every frame, map the expected
  value directly within wn->ridx
- concat plcp, rflags and xrflags, there is no clean byte boundary within
  the flags, for example the antenna setting uses bit 6, 7 and 8
- there is still need for a custom rate to plcp mapping, as those expected
  by the hardware are not conform to the std
2011-05-08 11:49:50 +00:00
Bernhard Schmidt
e9823bf8c9 Read chainmask information before announcing it. 2011-05-08 11:05:03 +00:00
Bernhard Schmidt
d86e3b2227 Add HT capabilities to probe requests. 2011-05-08 11:03:16 +00:00
Bernhard Schmidt
c9ce626212 Disable background scan support for 4965 adapters.
On legacy channels every once in a while the firmware throws a SYSASSERT
on line 208. On HT channels though this does always happen and I'm not
aware of any workaround currently.
2011-05-08 11:01:53 +00:00
Bernhard Schmidt
b648a23887 RX aggregation is slightly different then the legacy path, we will only
receive one RX_PHY for each aggregate and not one RX_PHY per frame.
2011-05-08 10:57:44 +00:00
Bernhard Schmidt
45e562203f Allocate all TX rings, those will be use for TX packet aggregation. 2011-05-08 10:54:50 +00:00
Bernhard Schmidt
3c2a1fc39d Use the enhanced TX power information availabe on newer EEPROMs. 2011-05-08 10:35:16 +00:00
Bernhard Schmidt
c07d5014de Hook HT channel setup. 2011-05-08 10:31:22 +00:00
Bernhard Schmidt
688f94830d The 6000 series adapters have a slightly different offset for band 6,
2GHz HT40 channels.
2011-05-08 10:21:42 +00:00
Bernhard Schmidt
3016ab149d Re-add 2 device IDs which got lost.
Pointed out by:	benjsc
2011-05-08 10:19:29 +00:00
Bernhard Schmidt
9cfb2cd173 Now that all bits are in for 1030/6230 adapters enable those.
While here pull the adapter names from the Linux driver and sort
the list by ID.
2011-04-20 17:49:05 +00:00
Bernhard Schmidt
57becf59ea The 6000 series gen2 adapters have 2 firmware images, one with
advanced btcoex support and one without.
2011-04-20 17:43:20 +00:00
Bernhard Schmidt
8bb237d949 Add basic support for advanced bluetooth coexistence required
for 6005 gen2b (1030/6030) adapters.
2011-04-20 16:59:27 +00:00
Bernhard Schmidt
d37f258ba9 Enable DC calibration for all 6000 series devices, except those
with an internal PA.
Override the chainmask also for the 6050.
2011-04-19 19:51:35 +00:00
Bernhard Schmidt
9ff2129fbe Pull some features out of the firmware:
- If a ENH_SENS TLV section exit the firmware is capable of doing
  enhanced sensitivity calibration.
- Newer devices/firmwares have more calibration commands therefore
  hardcoding the noise gain/reset commands no longer works. It is
  supposed to use the next index after the newest calibration type
  support. Read the command index of the TLV section if available.
2011-04-19 19:47:41 +00:00
Bernhard Schmidt
9dd0e40b62 Add some new features:
- 6000 series devices need enhanced sensitivity calibration.
- 6000 series devices need a different setting for the shadow reg.
- set the IWN_FLAG_HAS_11N bit if the EEPROM says the device has 11n
  support.

Obtained from:	OpenBSD
2011-04-16 14:56:13 +00:00
Bernhard Schmidt
552e368d27 Bring over the HAL/OPS changes, instead of two const structs it is now
slightly more dynamic.

Obtained from:	OpenBSD
2011-04-16 14:51:46 +00:00
Bernhard Schmidt
61a504f68f Read RX/TX chainmasks directly of the EEPROM. Some chips are known to
have the wrong/broken information stored, keep the hardcoded values for
those.

Obtained from:	OpenBSD
2011-04-16 14:49:29 +00:00
Bernhard Schmidt
a987f807de Just a whitespace sync, some more style(9) conform then others. 2011-04-16 14:40:42 +00:00
Bernhard Schmidt
6cc1bb61fa Sync comments with OpenBSD. 2011-04-16 14:38:57 +00:00
Bernhard Schmidt
80ee921916 Sync debug and error messages with OpenBSD. 2011-04-16 14:38:01 +00:00
Bernhard Schmidt
786b72c5bc Shuffle code around a bit. Mostly to group functional connected things,
others to get the same order as the OpenBSD code.
2011-04-16 14:36:43 +00:00
Bernhard Schmidt
5fd12c76a8 Rename some stuff in favour of the OpenBSD names:
- prefer EDCA over WME
- qid for a TXQ ID
- reg for register values
2011-04-16 13:40:32 +00:00
Bernhard Schmidt
4e61a8e57c Fix WME/QoS handling:
- move the TX queue selection into iwn_tx_data/iwn_tx_data_raw
- extract traffic identifier and use it
- do not expect ACKs for frames marked as such
2011-04-16 13:25:19 +00:00
Bernhard Schmidt
baa8b4ad20 Remove if_ierrors which do not necessarily indicate a RX error, also
do account send packets. While here use the IWN_TX_FAIL constant.
2011-04-16 13:12:12 +00:00
Bernhard Schmidt
3096855e8c Instead of hardcoding TX rates and using that to fill the retry table
use the neogotiated ni_rates instead.
2011-04-16 12:42:54 +00:00
Bernhard Schmidt
7223fe84f2 Replace RX/TX ring allocation error messages with something more sane
and remove those where the caller already prints one.
2011-04-16 11:14:42 +00:00
Bernhard Schmidt
0df53de1c3 Prevent double-free, also use the same error codes as OpenBSD. 2011-04-16 11:11:22 +00:00
Bernhard Schmidt
47c2ecefcc Add missing bus_dmamap_sync calls as well as remove two duplicate ones.
Obtained from:	OpenBSD
2011-04-16 10:52:11 +00:00
Bernhard Schmidt
fac0198998 Unify TX/RX ring allocation, finish the descriptior DMA stuff before
starting with data.
2011-04-16 10:38:27 +00:00
Bernhard Schmidt
a59641a1a4 Make sure to destroy all DMA tags and maps. 2011-04-16 10:35:02 +00:00