Currently, 'ifconfig laggX down' does not remove members from this
lagg(4) interface. So, 'service netif stop laggX' followed by
'service netif start laggX' will choke, because "stop" will leave
interfaces attached to the laggX and ifconfig from the "start" will
refuse to add already-existing interfaces.
The real-world case is when I am bundling together my Ethernet and
WiFi interfaces and using multiple profiles for accessing network in
different places: system being booted up with one profile, but later
this profile being exchanged to another one, followed by 'service
netif restart' will not add WiFi interface back to the lagg: the
"stop" action from 'service netif restart' will shut down my main WiFi
interface, so wlan0 that exists in the lagg0 will be destroyed and
purged from lagg0; the "start" action will try to re-add both
interfaces, but since Ethernet one is already in lagg0, ifconfig will
refuse to add the wlan0 from WiFi interface.
Since adding the interface to the lagg(4) when it is already here
should be an idempotent action: we're really not changing anything,
so this fix doesn't change the semantics of interface addition.
Approved by: thompsa
Reviewed by: emaste
MFC after: 1 week
headers for TSO but also for generic checksum offloading. Ideally we
would only have one common function shared amongst all drivers, and
perhaps when updating them for IPv6 we should introduce that.
Eventually we should provide the meta information along with mbufs to
avoid (re-)parsing entirely.
To not break IPv6 (checksums and offload) and to be able to MFC the
changes without risking to hurt 3rd party drivers, duplicate the v4
framework, as other OSes have done as well.
Introduce interface capability flags for TX/RX checksum offload with
IPv6, to allow independent toggling (where possible). Add CSUM_*_IPV6
flags for UDP/TCP over IPv6, and reserve further for SCTP, and IPv6
fragmentation. Define CSUM_DELAY_DATA_IPV6 as we do for legacy IP and
add an alias for CSUM_DATA_VALID_IPV6.
This pretty much brings IPv6 handling in line with IPv4.
TSO is still handled in a different way and not via if_hwassist.
Update ifconfig to allow (un)setting of the new capability flags.
Update loopback to announce the new capabilities and if_hwassist flags.
Individual driver updates will have to follow, as will SCTP.
Reported by: gallatin, dim, ..
Reviewed by: gallatin (glanced at?)
MFC after: 3 days
X-MFC with: r235961,235959,235958
Simple yet effective change enabling checksum "offload" on loopback
for IPv6 to avoid expensive computations.
Sponsored by: The FreeBSD Foundation
Sponsored by: iXsystems
Reviewed by: gnn (as part of the whole)
MFC After: 3 days
Eliminate bpf_buffer_alloc() and allocate BPF buffers on descriptor creation and BIOCSBLEN ioctl.
This permits us not to allocate buffers inside bpf_attachd() which is protected by global lock.
Approved by: kib(mentor)
MFC in: 4 weeks
'flags' field is added to the end of bpf_if structure. Currently the only
flag is BPFIF_FLAG_DYING which is set on bpf detach and checked by bpf_attachd()
Problem can be easily triggered on SMP stable/[89] by the following command (sort of):
'while true; do ifconfig vlan222 create vlan 222 vlandev em0 up ; tcpdump -pi vlan222 & ; ifconfig vlan222 destroy ; done'
Fix possible use-after-free when BPF detaches itself from interface, freeing bpf_bif memory,
while interface is still UP and there can be routes via this interface.
Freeing is now delayed till ifnet_departure_event is received via eventhandler(9) api.
Convert bpfd rwlock back to mutex due lack of performance gain (currently checking if packet
matches filter is done without holding bpfd lock and we have to acquire write lock if packet matches)
Approved by: kib(mentor)
MFC in: 4 weeks
Fix panic on tcpdump being attached to interface being removed (introduced by r233937, pointed by hrs@ and adrian@)
Protect most of bpf_setf() by BPF global lock
Add several forgotten assertions (thanks to adrian@)
Document current locking model inside bpf.c
Document EVENTHANDLER(9) usage inside BPF.
Approved by: kib(mentor)
Tested by: gnn
MFC in: 4 weeks
Cleaner solution (e.g. adding another header) should be done here.
Original log:
Move several enums and structures required for L2 filtering from ip_fw_private.h to ip_fw.h.
Remove ipfw/ip_fw_private.h header from non-ipfw code.
Requested by: luigi
Approved by: kib(mentor)
Lagg(4) restricts the type of packet that may be sent directly to a child
port, to avoid undesired output from accidental misconfiguration.
Previously only ETHERTYPE_PAE was permitted.
BPF writes to a lagg(4) child port are presumably intentional, so just
allow them, while still blocking other packets that should take the
aggregation path.
PR: kern/138620
Approved by: thompsa@
via sysctl(4) interface. This permits router not to stop forwarding
packets while route table is being written to user-supplied buffer.
Reported by: Pawel Tyll <ptyll@nitronet.pl>
Approved by: kib(mentor)
MFC after: 1 week
are discarded, this is an issue because lacp drops the lock which may allow
network threads to access freed memory. Expand the lock coverage so the
detach/attach happen atomically.
Submitted by: Andrew Boyer (earlier version)
Linux and Solaris (at least OpenSolaris) has PF_PACKET socket families to send
raw ethernet frames. The only FreeBSD interface that can be used to send raw frames
is BPF. As a result, many programs like cdpd, lldpd, various dhcp stuff uses
BPF only to send data. This leads us to the situation when software like cdpd,
being run on high-traffic-volume interface significantly reduces overall performance
since we have to acquire additional locks for every packet.
Here we add sysctl that changes BPF behavior in the following way:
If program came and opens BPF socket without explicitly specifyin read filter we
assume it to be write-only and add it to special writer-only per-interface list.
This makes bpf_peers_present() return 0, so no additional overhead is introduced.
After filter is supplied, descriptor is added to original per-interface list permitting
packets to be captured.
Unfortunately, pcap_open_live() sets catch-all filter itself for the purpose of
setting snap length.
Fortunately, most programs explicitly sets (event catch-all) filter after that.
tcpdump(1) is a good example.
So a bit hackis approach is taken: we upgrade description only after second
BIOCSETF is received.
Sysctl is named net.bpf.optimize_writers and is turned off by default.
- While here, document all sysctl variables in bpf.4
Sponsored by Yandex LLC
Reviewed by: glebius (previous version)
Reviewed by: silence on -net@
Approved by: (mentor)
MFC after: 4 weeks
Interface locks and descriptor locks are converted from mutex(9) to rwlock(9).
This greately improves performance: in most common case we need to acquire 1
reader lock instead of 2 mutexes.
- Remove filter(descriptor) (reader) lock in bpf_mtap[2]
This was suggested by glebius@. We protect filter by requesting interface
writer lock on filter change.
- Cover struct bpf_if under BPF_INTERNAL define. This permits including bpf.h
without including rwlock stuff. However, this is is temporary solution,
struct bpf_if should be made opaque for any external caller.
Found by: Dmitrij Tejblum <tejblum@yandex-team.ru>
Sponsored by: Yandex LLC
Reviewed by: glebius (previous version)
Reviewed by: silence on -net@
Approved by: (mentor)
MFC after: 3 weeks
rather than the header file. With this also move RT_MAXFIBS and
RT_NUMFIBS into the implemantion to avoid further usage in other
code. rt_numfibs is all that should be needed.
This allows users to change the number of FIBs from 1..RT_MAXFIBS(16)
dynamically using the tunable without the need to change the kernel
config for the maximum anymore. This means that thet multi-FIB
feature is now fully available with GENERIC kernels.
The kernel option ROUTETABLES can still be used to set the default
numbers of FIBs in absence of the tunable.
Ok.ed by: julian, hrs, melifaro
MFC after: 2 weeks
- add the macro NETMAP_RING_FIRST_RESERVED() which returns
the index of the first non-released buffer in the ring
(this is useful for code that retains buffers for some time
instead of processing them immediately)
using the o32 ABI. This mostly follows nwhitehorn's lead in implementing
COMPAT_FREEBSD32 on powerpc64.
o) Add a new type to the freebsd32 compat layer, time32_t, which is time_t in the
32-bit ABI being used. Since the MIPS port is relatively-new, even the 32-bit
ABIs use a 64-bit time_t.
o) Because time{spec,val}32 has the same size and layout as time{spec,val} on MIPS
with 32-bit compatibility, then, disable some code which assumes otherwise
wrongly when built for MIPS. A more general macro to check in this case would
seem like a good idea eventually. If someone adds support for using n32
userland with n64 kernels on MIPS, then they will have to add a variety of
flags related to each piece of the ABI that can vary. That's probably the
right time to generalize further.
o) Add MIPS to the list of architectures which use PAD64_REQUIRED in the
freebsd32 compat code. Probably this should be generalized at some point.
Reviewed by: gonzo
USERSPACE:
1. add support for devices with different number of rx and tx queues;
2. add better support for zero-copy operation, adding an extra field
to the netmap ring to indicate how many buffers we have already processed
but not yet released (with help from Eddie Kohler);
3. The two changes above unfortunately require an API change, so while
at it add a version field and some spares to the ioctl() argument
to help detect mismatches.
4. update the manual page for the two changes above;
5. update sample applications in tools/tools/netmap
KERNEL:
1. simplify the internal structures moving the global wait queues
to the 'struct netmap_adapter';
2. simplify the functions that map kring<->nic ring indexes
3. normalize device-specific code, helps mainteinance;
4. start exploring the impact of micro-optimizations (prefetch etc.)
in the ixgbe driver.
Use 'legacy' descriptors on the tx ring and prefetch slots gives
about 20% speedup at 900 MHz. Another 7-10% would come from removing
the explict calls to bus_dmamap* in the core (they are effectively
NOPs in this case, but it takes expensive load of the per-buffer
dma maps to figure out that they are all NULL.
Rx performance not investigated.
I am postponing the MFC so i can import a few more improvements
before merging.
bridge, this allows us to have more than one independent bridge in the same
STP domain.
PR: kern/164369
Submitted by: Nikos Vassiliadis (earlier version)
MFC after: 2 weeks
at which the lle_tbl pointer points to freed memory and the llt_free pointer is no longer
valid.
Move the free pointer in to the llentry itself and update the initalization sites.
MFC after: 2 weeks
the traffic flow, this may not be the case giving poor traffic distribution.
Add a sysctl which allows us to fall back to our own flow hash code.
PR: kern/164901
Submitted by: Eugene Grosbein
MFC after: 1 week
The lang/gcc* ports patch headers where they think something is
non-standard. These patched headers override the system headers which means
you have to rebuild these ports whenever you do installworld to make sure
they contain the latest changes.
on extended and extensible structs if_msghdrl and ifa_msghdrl. This
will allow us to extend both the msghdrl structs and eventually if_data
in the future without breaking the ABI.
Bump __FreeBSD_version to allow ports to more easily detect the new API.
Reviewed by: glebius, brooks
MFC after: 3 days
TUNABLE variable (hw.netmap.buf_size) so we can experiment
with values different from 2048 which may give better cache performance.
- rearrange the memory allocation code so it will be easier
to replace it with a different implementation. The current code
relies on a single large contiguous chunk of memory obtained through
contigmalloc.
The new implementation (not committed yet) uses multiple
smaller chunks which are easier to fit in a fragmented address
space.
the original IPv4 implementation from r178888:
- Use RT_DEFAULT_FIB in the IPv4 implementation where noticed.
- Use rt*fib() KPI with explicit RT_DEFAULT_FIB where applicable in
the NFS code.
- Use the new in6_rt* KPI in TCP, gif(4), and the IPv6 network stack
where applicable.
- Split in6_rtqtimo() and in6_mtutimo() as done in IPv4 and equally
prevent multiple initializations of callouts in in6_inithead().
- Use wrapper functions where needed to preserve the current KPI to
ease MFCs. Use BURN_BRIDGES to indicate expected future cleanup.
- Fix (related) comments (both technical or style).
- Convert to rtinit() where applicable and only use custom loops where
currently not possible otherwise.
- Multicast group, most neighbor discovery address actions and faith(4)
are locked to the default FIB. Individual IPv6 addresses will only
appear in the default FIB, however redirect information and prefixes
of connected subnets are automatically propagated to all FIBs by
default (mimicking IPv4 behavior as closely as possible).
Sponsored by: Cisco Systems, Inc.
the (maximum) number of FIBs trying to clarify that evetually FIBs
should probably attached to domain(9) specific storage. [1]
Add a comment on a limitimation on the rt_add_addr_allfibs option.
Use RT_DEFAULT_FIB instead of 0 where applicable.
Add empty line to functions without local variables per style.
Put public yet unused in-tree function rtinit_fib() under BURN_BRIDGES
to indicate that it might go away in the future.
No functional change.
Discussed with: julian [1] (clarification on what the original one meant)
Sponsored by: Cisco Systems, Inc.
While doing so, for consistency with the rtalloc_ign_fib(9) interface
called, remove the "in_" prefix from rtalloc_ign_wrapper() no longer
indicating that it would only handle the INET case.
Sponsored by: Cisco Systems, Inc.
tables (FIBs) as IPv4.
Prepare various general rt* functions for multi-FIB IPv6 handling in
addition to already existing multi-FIB IPv4 cases.
Sponsored by: Cisco Systems, Inc.
referenced within its timeout window. This change clears the LLE_VALID flag when an llentry
is removed from an interface's hash table and adds an extra check to the flowtable code
for the LLE_VALID flag in llentry to avoid retaining and using a stale reference.
Reviewed by: qingli@
MFC after: 2 weeks
802.1q-defined 16-bit VID, CFI, and PCP field in host by order) and a
VLAN ID (VID). Tags go in packets. VIDs identify VLANs.
No functional change is intended, so this should be safe to MFC. Further
cleanup with functional changes will be committed separately (for example,
renaming vlan_tag/vlan_tag_p, which modify the KPI and KBI).
Reviewed by: bz
Sponsored by: ADARA Networks, Inc.
MFC after: 3 days
bpf_iflist list which reference the specified ifnet. The existing implementation
only removes the first matching bpf_if found in the list, effectively leaking
list entries if an ifnet has been bpfattach()ed multiple times with different
DLTs.
Fix the leak by performing the detach logic in a loop, stopping when all bpf_if
structs referencing the specified ifnet have been detached and removed from the
bpf_iflist list.
Whilst here, also:
- Remove the unnecessary "bp->bif_ifp == NULL" check, as a bpf_if should never
exist in the list with a NULL ifnet pointer.
- Except when INVARIANTS is in the kernel config, silently ignore the case where
no bpf_if referencing the specified ifnet is found, as it is harmless and does
not require user attention.
Reviewed by: csjp
MFC after: 1 week
interface address lists that distinguish read locks from write locks.
To preserve the KPI, the previous operations are mapped to the write
lock macros. The lock is still kept as a mutex for now.
Reviewed by: bz
MFC after: 2 weeks
the code is doing, we recognise the legitimacy of its goal, but we're not
quite sure it's going about it the right way. More pondering is clearly
required.
Sponsored by: ADARA Networks, Inc.
Discussed with: bz
MFC after: 3 days
aspect of time stamp configuration per interface rather than per BPF
descriptor. Prior to this, the order in which BPF devices were opened and the
per descriptor time stamp configuration settings could cause non-deterministic
and unintended behaviour with respect to time stamping. With the new scheme, a
BPF attached interface's tscfg sysctl entry can be set to "default", "none",
"fast", "normal" or "external". Setting "default" means use the system default
option (set with the net.bpf.tscfg.default sysctl), "none" means do not
generate time stamps for tapped packets, "fast" means generate time stamps for
tapped packets using a hz granularity system clock read, "normal" means
generate time stamps for tapped packets using a full timecounter granularity
system clock read and "external" (currently unimplemented) means use the time
stamp provided with the packet from an underlying source.
- Utilise the recently introduced sysclock_getsnapshot() and
sysclock_snap2bintime() KPIs to ensure the system clock is only read once per
packet, regardless of the number of BPF descriptors and time stamp formats
requested. Use the per BPF attached interface time stamp configuration to
control if sysclock_getsnapshot() is called and whether the system clock read
is fast or normal. The per BPF descriptor time stamp configuration is then
used to control how the system clock snapshot is converted to a bintime by
sysclock_snap2bintime().
- Remove all FAST related BPF descriptor flag variants. Performing a "fast"
read of the system clock is now controlled per BPF attached interface using
the net.bpf.tscfg sysctl tree.
- Update the bpf.4 man page.
Committed on behalf of Julien Ridoux and Darryl Veitch from the University of
Melbourne, Australia, as part of the FreeBSD Foundation funded "Feed-Forward
Clock Synchronization Algorithms" project.
For more information, see http://www.synclab.org/radclock/
In collaboration with: Julien Ridoux (jridoux at unimelb edu au)
While I'm here update if_oerrors if parent interface of vlan is not
up and running. Previously it updated collision counter and it was
confusing to interprete it.
PR: kern/163478
Reviewed by: glebius, jhb
Tested by: Joe Holden < lists <> rewt dot org dot uk >
7.x, 8.x and 9.x with pf(4) imports: pfsync(4) should suppress CARP
preemption, while it is running its bulk update.
However, reimplement the feature in more elegant manner, that is
partially inspired by newer OpenBSD:
- Rename term "suppression" to "demotion", to match with OpenBSD.
- Keep a global demotion factor, that can be raised by several
conditions, for now these are:
- interface goes down
- carp(4) has problems with ip_output() or ip6_output()
- pfsync performs bulk update
- Unlike in OpenBSD the demotion factor isn't a counter, but
is actual value added to advskew. The adjustment values for
particular error conditions are also configurable, and their
defaults are maximum advskew value, so a single failure bumps
demotion to maximum. This is for POLA compatibility, and should
satisfy most users.
- Demotion factor is a writable sysctl, so user can do
foot shooting, if he desires to.
from scratch, copying needed functionality from the old implemenation
on demand, with a thorough review of all code. The main change is that
interface layer has been removed from the CARP. Now redundant addresses
are configured exactly on the interfaces, they run on.
The CARP configuration itself is, as before, configured and read via
SIOCSVH/SIOCGVH ioctls. A new prefix created with SIOCAIFADDR or
SIOCAIFADDR_IN6 may now be configured to a particular virtual host id,
which makes the prefix redundant.
ifconfig(8) semantics has been changed too: now one doesn't need
to clone carpXX interface, he/she should directly configure a vhid
on a Ethernet interface.
To supply vhid data from the kernel to an application the getifaddrs(8)
function had been changed to pass ifam_data with each address. [1]
The new implementation definitely closes all PRs related to carp(4)
being an interface, and may close several others. It also allows
to run a single redundant IP per interface.
Big thanks to Bjoern Zeeb for his help with inet6 part of patch, for
idea on using ifam_data and for several rounds of reviewing!
PR: kern/117000, kern/126945, kern/126714, kern/120130, kern/117448
Reviewed by: bz
Submitted by: bz [1]
A link reset now is completely transparent for the netmap client:
even if the NIC resets its own ring (e.g. restarting from 0),
the client will not see any change in the current rx/tx positions,
because the driver will keep track of the offset between the two.
2. make the device-specific code more uniform across different drivers
There were some inconsistencies in the implementation of the netmap
support routines, now drivers have been aligned to a common
code structure.
3. import netmap support for ixgbe . This is implemented as a very
small patch for ixgbe.c (233 lines, 11 chunks, mostly comments:
in total the patch has only 54 lines of new code) , as most of
the code is in an external file sys/dev/netmap/ixgbe_netmap.h ,
following some initial comments from Jack Vogel about making
changes less intrusive.
(Note, i have emailed Jack multiple times asking if he had
comments on this structure of the code; i got no reply so
i assume he is fine with it).
Support for other drivers (em, lem, re, igb) will come later.
"ixgbe" is now the reference driver for netmap support. Both the
external file (sys/dev/netmap/ixgbe_netmap.h) and the device-specific
patches (in sys/dev/ixgbe/ixgbe.c) are heavily commented and should
serve as a reference for other device drivers.
Tested on i386 and amd64 with the pkt-gen program in tools/tools/netmap,
the sender does 14.88 Mpps at 1050 Mhz and 14.2 Mpps at 900 MHz
on an i7-860 with 4 cores and 82599 card. Haven't tried yet more
aggressive optimizations such as adding 'prefetch' instructions
in the time-critical parts of the code.
parent interface. This avoids the overhead of queueing a packet to an IFQ
only to immediately dequeue it again.
Suggested by: np
Reviewed by: brooks
MFC after: 1 month
of hand-made.
- When registering new cloner, check whether a cloner with
same name already exist.
- When allocating unit, also check with help of ifunit()
whether such interface already exist or not. [1]
PR: kern/162789 [1]
contain both a regular timestamp obtained from the system clock and the
current feed-forward ffcounter value. This enables new possibilities including
comparison of timekeeping performance and timestamp correction during post
processing.
- Add the net.bpf.ffclock_tstamp sysctl to provide a choice between timestamping
packets using the feedback or feed-forward system clock.
Committed on behalf of Julien Ridoux and Darryl Veitch from the University of
Melbourne, Australia, as part of the FreeBSD Foundation funded "Feed-Forward
Clock Synchronization Algorithms" project.
For more information, see http://www.synclab.org/radclock/
Submitted by: Julien Ridoux (jridoux at unimelb edu au)
I/O from userspace, capable of line rate at 10G, see
http://info.iet.unipi.it/~luigi/netmap/
At this time I am bringing in only the generic code (sys/dev/netmap/
plus two headers under sys/net/), and some sample applications in
tools/tools/netmap. There is also a manpage in share/man/man4 [1]
In order to make use of the framework you need to build a kernel
with "device netmap", and patch individual drivers with the code
that you can find in
sys/dev/netmap/head.diff
The file will go away as the relevant pieces are committed to
the various device drivers, which should happen in a few days
after talking to the driver maintainers.
Netmap support is available at the moment for Intel 10G and 1G
cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re").
I have partial patches for "bge" and am starting to work on "cxgbe".
Hopefully changes are trivial enough so interested third parties
can submit their patches. Interested people can contact me
for advice on how to add netmap support to specific devices.
CREDITS:
Netmap has been developed by Luigi Rizzo and other collaborators
at the Universita` di Pisa, and supported by EU project CHANGE
(http://www.change-project.eu/)
The code is distributed under a BSD Copyright.
[1] In my opinion is a bad idea to have all manpage in one directory.
We should place kernel documentation in the same dir that contains
the code, which would make it much simpler to keep doc and code
in sync, reduce the clutter in share/man/ and incidentally is
the policy used for all of userspace code.
Makefiles and doc tools can be trivially adjusted to find the
manpages in the relevant subdirs.
if_alloctype was used to store the origional interface type. Take
advantage of this change by removing all existing uses of if_free_type()
in favor of if_free().
MFC after: 1 Month
The SYSCTL_NODE macro defines a list that stores all child-elements of
that node. If there's no SYSCTL_DECL macro anywhere else, there's no
reason why it shouldn't be static.
masked out when adding a prefix route through the "route" command.
However, when deleting the route, simply changing the command keyword
from "add" to "delete" does not work. The failoure is observed in
both IPv4 and IPv6 route insertion. The patch makes the route command
behavior consistent between the "add" and the "delete" operation.
MFC after: 1 week
According to POSIX, these two header files should be able to be included
by themselves, not depending on other headers. The <net/if.h> header
uses struct sockaddr when __BSD_VISIBLE=1, while <netinet/tcp.h> uses
integer datatypes (u_int32_t, u_short, etc).
MFC after: 2 months
It seems the D_PSEUDO flag was meant to allow make_dev() to return NULL.
Nowadays we have a different interface for that; make_dev_p(). There's
no need to keep it there.
While there, remove an unneeded D_NEEDMINOR from the gpio driver.
Discussed with: gonzo@ (gpio)
rtsock allowing routing daemons to filter routing updates on an
rtsock per FIB.
Adjust raw_input() and split it into wrapper and a new function
taking an optional callback argument even though we only have one
consumer [1] to keep the hackish flags local to rtsock.c.
PR: kern/134931
Submitted by: multiple (see PR)
Suggested by: rwatson [1]
Reviewed by: rwatson
MFC after: 3 days
patch modifies makesyscalls.sh to prefix all of the non-compatibility
calls (e.g. not linux_, freebsd32_) with sys_ and updates the kernel
entry points and all places in the code that use them. It also
fixes an additional name space collision between the kernel function
psignal and the libc function of the same name by renaming the kernel
psignal kern_psignal(). By introducing this change now we will ease future
MFCs that change syscalls.
Reviewed by: rwatson
Approved by: re (bz)
hostid, this gives a good chance of keeping the same address over
reboots. This is intended to help IPV6 and similar which generate
their addresses from the mac.
PR: kern/160300
Submitted by: mdodd
Approved by: re (kib)
If a selinfo object is recorded (via selrecord()) and then it is
quickly destroyed, with the waiters missing the opportunity to awake,
at the next iteration they will find the selinfo object destroyed,
causing a PF#.
That happens because the selinfo interface has no way to drain the
waiters before to destroy the registered selinfo object. Also this
race is quite rare to get in practice, because it would require a
selrecord(), a poll request by another thread and a quick destruction
of the selrecord()'ed selinfo object.
Fix this by adding the seldrain() routine which should be called
before to destroy the selinfo objects (in order to avoid such case),
and fix the present cases where it might have already been called.
Sometimes, the context is safe enough to prevent this type of race,
like it happens in device drivers which installs selinfo objects on
poll callbacks. There, the destruction of the selinfo object happens
at driver detach time, when all the filedescriptors should be already
closed, thus there cannot be a race.
For this case, mfi(4) device driver can be set as an example, as it
implements a full correct logic for preventing this from happening.
Sponsored by: Sandvine Incorporated
Reported by: rstone
Tested by: pluknet
Reviewed by: jhb, kib
Approved by: re (bz)
MFC after: 3 weeks
to find the first route node of an ECMP chain before executing the route
command. If the system has a default route, and the specific route argument
to the command does not exist in the routing table, then the default route
would be reached. The current code does not verify the reached node matches
the given route argument, therefore erroneous removed the entry. This patch
fixes that bug.
Approved by: re
MFC after: 3 days
initialized by flags (function argument) or-ed with ifa->ifa_flags.
If both NIC has a loopback route to itself, so IFA_RTSELF is set on ifa(s).
As IFA_RTSELF is defined by RTF_HOST, rtrequest1_fib() is called with
RTF_HOST flag even if netmask is not NULL. Consequently, netmask is set
to zero in rtrequest1_fib(), and request to add network route is changed
under hands to request to add host route.
Tested by: Andrew Boyer <aboyer at averesystems.com>
Submitted by: Svatopluk Kraus <onwahe at gmail dot com>
Approved by: re (hrs)
- TCP keep* timers
- TCP UTO (adjust from what was there already)
- netmap
- route caching
- user cookie (temporary to allow for the real fix)
Slightly re-shuffle struct ifnet moving fields out of the middle
of spares and to better align.
Discussed with: rwatson (slightly earlier version)
same as the host address. This already works fine for INET6 and ND6.
While here, remove two function pointers from struct lltable which are
only initialized but never used.
MFC after: 3 days
setting (either default or if supported as set by SIOCSIFFIB, e.g.
from ifconfig).
Submitted by: Alexander V. Chernikov (melifaro ipfw.ru)
Reviewed by: julian
MFC after: 2 weeks
to be assigned to a non-default FIB instance.
You may need to recompile world or ports due to the change of struct ifnet.
Submitted by: cjsp
Submitted by: Alexander V. Chernikov (melifaro ipfw.ru)
(original versions)
Reviewed by: julian
Reviewed by: Alexander V. Chernikov (melifaro ipfw.ru)
MFC after: 2 weeks
X-MFC: use spare in struct ifnet
(i.e. under COMPAT_FREEBSD32) in case ifconf() returned success to match
the native SIOCGIFCONF behavior.
PR: kern/158369
Reported by: Paul Procacci <pprocacci att gmail com>
MFC after: 1 week
On MP systems this is not a usable solution anymore and could easily
lead to false positives triggering enough logging that even using
the console was no longer usable (multiple parallel ping -f can do).
Switch to the suggested solution of using mbuf tags to carry per
packet state between gre_output() invocations. Contrary to the
proposed solution modelled after gif(4) only allocate one mbuf tag
per packet rather than per packet and per gre_output() pass through.
As the sysctl to control the possible valid (gre in gre) nestings does
no sanity checks, make sure to always allocate space in the mbuf tag
for at least one, and at most 255 possible gre interfaces to detect
loops in addition to the counter.
Submitted by: Cristian KLEIN (cristi net.utcluj.ro) (original version)
PR: kern/114714
Reviewed by: Cristian KLEIN (cristi net.utcluj.ro)
Reviewed bu: Wooseog Choi (ben_choi hotmail.com)
Sponsored by: Sandvine Incorporated
MFC after: 1 week
Document the fact that we might want an IFCAP_CANTCHANGE mask,
even though the value is not yet used in sys/net/if.c
(asked on -current a week ago, no feedback so i assume no objection).
due to m_uiotombuf() failing.
While here, trim unneeded error handling related to tuninit() since it
can never fail.
Submitted by: Martin Birgmeier la5lbtyi aon at
Reviewed by: glebius
MFC after: 1 week
default dispatch method to NETISR_DISPATCH_DIRECT in order to force
direct dispatch. This adds a fairly negligble overhead without
changing default behavior, but in the future will allow deferred or
hybrid dispatch to other worker threads before link layer processing
has taken place.
For example, this could allow redistribution using RSS hashes
without ethernet header cache line hits, if the NIC was unable to
adequately implement load balancing to too small a number of input
queues -- perhaps due to hard queueset counts of 1, 3, or 8, but in
a modern system with 16-128 threads. This can happen on highly
threaded systems, where you want want an ithread per core,
redistributing work to other queues, but also on virtualised systems
where hardware hashing is (or is not) available, but only a single
queue has been directed to one VCPU on a VM.
Note: this adds a previously non-present assertion about the
equivalence of the ifnet from which the packet is received, and the
ifnet stamped in the mbuf header. I believe this assertion to
generally be true, but we'll find out soon -- if it's not, we might
have to add additional overhead in some cases to add an m_tag with
the originating ifnet pointer stored in it.
Reviewed by: bz
MFC after: 3 weeks
Sponsored by: Juniper Networks, Inc.
be brought up in the order they are enumerated in the device tree (in
particular, that thread 0 on each core be brought up first). The SLIST
through which we loop to start the CPUs has all of its entries added with
SLIST_INSERT_HEAD(), which means it is in reverse order of enumeration
and so AP startup would always fail in such situations (causing a machine
check or RTAS failure). Fix this by changing the SLIST into an STAILQ,
and inserting new CPUs at the end.
Reviewed by: jhb
be represented:
- A single policy namespace is defined, consisting of four possible
policies: "default" to use the global default, "deferred" to force
deferred dispatch, "direct" to employ direct dispatch where possible, and
"hybrid" which makes a dynamic decision based on CPU affinity, ordering,
etc. Routines are implemented to convert between strings and an integer
namespace.
- A new global variable, netisr_dispatch_policy, subsumes existing global
variables for direct dispatch, forced direct dispatch, etc, and is used
for explicit policy interpretation and composition. Old variables remain
so that they can be exported by legacy sysctls for use by old netstat(1)
binaries. A new sysctl and tunable, netisr.dispatch.policy, accepts the
above strings for specifying a global policy default.
- The protocol registration structure, netisr_handler, grows an nh_dispatch
field, which accepts a per-policy policy override. The default value is
'0', which corresponds to "default", meaning that protocols will accept
the global default policy unless otherwise specified.
- Policies are now interpreted and composed explicitly at various points in
packet dispatch; protocol policies override global policies.
- Protocols grow the ability to express a non-opinion about affinity even
when implenting m2cpuid by returning NETISR_CPUID_NONE. In that case, the
framework falls back on source ordering, rather than simply using the
current CPU.
These changes are in support of allowing link layer re-dispatch based on
RSS or similar hashes provided by NICs, especially in the case where the
number of hardware receive queues matches hardware core count, rather than
hardware thread count, requiring further software redistributeon. (i.e.,
on RMI XLR).
MFC after: 3 weeks
Reviewed by: bz
Sponsored by: Juniper Networks, Inc.
on top of epair(4) virtual interfaces, since there's no physical
hardware associated with epair interfaces which would imply any
constraints on MTU sizes.
MFC after: 3 days
by borrowing the skeleton of if_media manipulation and reporting
code from if_lagg(4). The main motivation behind this change is
to allow for epair(4) interfaces to participate in STP if_bridge(4)
configurations.
Reviewed by: bz
MFC after: 3 days
interface is brought down, even though the interface address is still
valid. This patch maintains the permanent ARP entries as long as the
interface address (having the same prefix as that of the ARP entries)
is valid.
Reviewed by: delphij
MFC after: 5 days
- Add shorthand aliases for common media+option combinations as announced
by miibus(4) so that one can actually supply the media strings found in
the dmesg output to ifconfig(8).
Obtained from: NetBSD (in principle)
MFC after: 2 weeks
Transmission error in tun(4) is queueing error(i.e. ENOBUFS) and it
has nothing to do with collision.
Reported by: Zeus V Panchenko (zeus <> ibs dot dn dot ua)
adding appropriate #ifdefs. For module builds the framework needs
adjustments for at least carp.
Reviewed by: gnn
Sponsored by: The FreeBSD Foundation
Sponsored by: iXsystems
MFC after: 4 days
from the interface index, then decrease refcount, not vice versa.
Otherwise there is a race (reproducible) when if_free_internal()
contests on IFNET_WLOCK(), and we got a zero-refed ifnet in the
index for a long time. It may be picked by some other thread,
that runs ifnet_byindex_ref(), who takes the ifnet from index,
and bumps refcount. When reader drops the lock, if_free_internal()
proceeds with free. Then reader tries to free it a second time.
from processes inside jails if the addresses do not belong to the jail.
Originally reported by: Pieter de Boer via remko
PR: kern/151119
Tested by: Piotr KUCHARSKI (nospam 42.pl) [gif]
MFC after: 1 week
VNET socket push back:
try to minimize the number of places where we have to switch vnets
and narrow down the time we stay switched. Add assertions to the
socket code to catch possibly unset vnets as seen in r204147.
While this reduces the number of vnet recursion in some places like
NFS, POSIX local sockets and some netgraph, .. recursions are
impossible to fix.
The current expectations are documented at the beginning of
uipc_socket.c along with the other information there.
Sponsored by: The FreeBSD Foundation
Sponsored by: CK Software GmbH
Reviewed by: jhb
Tested by: zec
Tested by: Mikolaj Golub (to.my.trociny gmail.com)
MFC after: 2 weeks
Resort the CURVNET_SET* macros in the non-VNET_DEBUG case to match
the call order of the VNET_DEBUG case.
Add the VNET_ASSERT() to the non-VNET_DEBUG case as well so that
INVARIANTS will still catch problems.
Sponsored by: The FreeBSD Foundation
Sponsored by: CK Software GmbH
Reviewed by: jhb
MFC after: 2 weeks
Make VNET_ASSERT() available with either VNET_DEBUG or INVARIANTS.
Change the syntax to match KASSERT() to allow more flexible panic
messages rather than having a printf with hardcoded arguments
before panic.
Adjust the few assertions we have to the new format (and enhance
the output).
Sponsored by: The FreeBSD Foundation
Sponsored by: CK Software GmbH
Reviewed by: jhb
MFC after: 2 weeks
table in if_grow(). The order of the SYSINIT's for ifnet state were swapped
so that the various locks were initialized before being used.
Reviewed by: pluknet, bz
MFC after: 2 weeks
reading. (This was already done for writing to a sysctl). This
requires all SYSCTL setups to specify a type. Most of them are now
checked at compile-time.
Remove SYSCTL_*X* sysctl additions as the print being in hex should be
controlled by the -x flag to sysctl(8).
Succested by: bde
This was lost when it was converted to using a condition variable instead
of lbolt.
- Drop the priority of flowtable down to PPAUSE when it is idle as well
since it is a similar background task.
MFC after: 2 weeks
counterpart also takes, i.e. "fdx" for "full-duplex", "flow" for
"flowcontrol", "hdx" for "half-duplex" as well as "loop" and "loopback"
for "hw-loopback".
MFC after: 1 week
