- In the msgctl tests, there is no point in sleeping after a fork().
Just block immediately in wait().
- In non-blocking send/recv tests, just wait for the child to exit once
it's reached a message limit. If a bug prevents the child from
exiting promptly, the test will time out.
MFC after: 1 week
These architectures fail to handle this special case, and will cause the
corresponding setjmp/_setjmp to return 0 rather than 1. Fix this and add
regression tests (also committed upstream).
PR: 268684
Reviewed by: arichardson, jhb
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D29363
fgetln() returns a pointer to an array of characters that is 'len'
characters long, not 'len + 1'. While here, overwriting the contents
of the buffer returned by fgetln isn't really safe, so switch to using
getline() instead.
Note that these fixes are a subset of those applied to a
near-identical copy of this function in libc's resolv_test.c in commit
2afeaad315.
Reviewed by: ngie
Reported by: CHERI (buffer overflow)
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D37886
In the msg and shm tests, if the child exited before the parent
entered sigsuspend(), the test would hang and time out. This was
also a problem in the sem test, but the misuse of atf_tc_pass()
masked it. Adding a short sleep before the sigsuspend() calls made
the hang 100% reliable. With the same sleep in the new version,
the test passes reliably.
Remove calls to atf_tc_pass(). The call in the sem test broke the test
by exiting prematurely, after only one child out of five had finished.
The other two were harmless but unhelpful.
Reduce a one-second sleep to a more reasonable duration so I can quickly
run many iterations of the test.
Where feasible, assert that wait() returns the child PID. While I'm here,
use the more succinct ATF_REQUIRE* instead of if/atf_tc_fail/else.
Flush stdout before forking to avoid double-flush.
Use errx() when errno is irrelevant.
Don't use ATF_REQUIRE* in children. Apparently, the output doesn't
get saved. The exit status works, so it fails correctly, but silently.
Re-enable the test in CI.
PR: 233649
Reviewed by: markj (previous version)
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D35187
NetBSD has an ATF test for newfs_msdos. Connect it to the build.
Adapt it for FreeBSD. This would have caught the bug fixed by my
previous commit.
Reviewed by: delphij, emaste
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D34116
The test tries to connect a socket to a closed port at 127.0.0.1. It
sets O_NONBLOCK on the socket first and expects to get EINPROGRESS from
connect(2), but this is not guaranteed, ECONNREFUSED is possible.
Handle both cases, and re-enable the test.
PR: 240621
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
The stack gap implementation is disabled by default now, so the test
passes.
This reverts commit dad71022bd.
PR: 259969
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
This reverts commit 4f741801d8.
As per discussion in PR: 260303 the reverted patch covered the
real issue with a fixed address of the top of the stack.
With ASLR enabled by default, RLIMIT_STACK test fails due to the fact
that default stack gap can be as big as 15M. Because of that the
resource limit of 4M results in test program receiving SIGSEGV
immediately after exiting the setrlimit syscall. Since the idea of this
test is to check if rlim_cur does not extend past rlim_max, adjusting
the resource limit to 20M should not invalidate the test results.
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential revision: https://reviews.freebsd.org/D33116
ATF_REQUIRE_ERRNO requires the given errno iff the given expression is
true. These test cases used it incorrectly, potentially allowing
sem_clockwait_np to succeed when it was expected to fail. Use separate
ATF calls to require failure and the expected errno.
MFC after: 1 week
Sponsored by: Dell EMC Isilon
In a guest on a busy hypervisor, the time remaining after an
interrupted sleep could be much lower than other environments.
Relax the lower bound on VMs.
MFC after: 1 week
Sponsored by: Dell EMC Isilon
This diff primarily adds/removes flags to make the tests compatible with
sort. Two tests are removed. One test is changed to expect fail due to
a bug.
Reviewed by: markj
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D30217
It appears that the stackframe layout can be slightly different depending on
compiler and target architecture. For example, when using CHERI LLVM for RISC-V
we can actually overflow the buffer by up to 8 bytes without SSP detecting it.
Fix this by increasing the overflow to 15 bytes.
Reviewed By: ngie, emaste
Differential Revision: https://reviews.freebsd.org/D28997
I did this without a full vendor update since that would cause too many
conflicts. Since these files now almost match the NetBSD sources the
next git subtree merge should work just fine.
Reviewed By: lwhsu
Differential Revision: https://reviews.freebsd.org/D28797
Since 4581cefc1e
ATF opens the results file on startup. This fixes problems like
capsicumized tests not being able to open the file on exit.
However, this test closes all file descriptors above 3 to get a
deterministic fd table allocation for the child. Instead of using closefrom
(which will close the ATF output file FD) I've changed this test use
the lowest available fd and pass that to the helper program as a string.
We could also try to re-open the results file in ATF if we get a EBADF
error, but that will fail when running under Capsicum.
Reviewed By: cem
Differential Revision: https://reviews.freebsd.org/D28684
Since 4581cefc1e
ATF opens the results file on startup. This fixes problems like
capsicumized tests not being able to open the file on exit.
However, this test closes all file descriptors just to check that
socketpair returns fd 3+4 and thereby also closes the ATF results file.
This then results in an EBADF when writing the result so the test is
reported as broken.
While system calls that create new file descriptors (must?) use the lowest
available file descriptor number, it does not seem useful to test this
property here. Drop the check for FD==3/4 to unbreak the testsuite.
We could also try to re-open the results file in ATF if we get a EBADF
error, but that will fail when running under Capsicum.
Reviewed By: cem
Differential Revision: https://reviews.freebsd.org/D28683
The rpc_control() API does not accept the CLCR_SET_RPCB_TIMEOUT command,
it only accepts RPC_SVC_CONNMAXREC_GET/RPC_SVC_CONNMAXREC_SET, so it was
not doing anything.
Instead of incorrectly calling this API, use clnt_create_timed() instead.
I noticed this because the test was timing out after 120s in the CheriBSD CI.
Reviewed By: ngie
Differential Revision: https://reviews.freebsd.org/D28478
After d3338f3355, the lib/msun test case
'hypotl_near_underflow' would fail to compile on platforms where long
doubles weren't 80 bit, like on x86. Disable this particular test on
such platforms for now.
PR: 253313
MFC after: 1 week
X-MFC-With: d3338f3355
This adjusts the factor used to scale the subnormal numbers, so it
becomes the right value after adjusting its exponent. Thanks to Steve
Kargl for finding the most elegant fix.
Also enable the hypot tests, and add a test case for this bug.
PR: 253313
MFC after: 1 week
The basic issue here is that grep, when given -m 1, would stop all
line processing once it hit the match count and exit immediately. The
problem with exiting immediately is that -A processing only happens when
subsequent lines are processed and do not match.
The fix here is relatively easy; when bsdgrep matches a line, it resets
the 'tail' of the matching context to the value supplied to -A and
dumps anything that's been queued up for -B. After the current line has
been printed and tail is reset, we check our mcount and do what's
needed. Therefore, at the time that we decide we're doing nothing, we
know that 'tail' of the context is correct and we can simply continue
on if there's still more to pick up.
With this change, we still bail out immediately if there's been no -A
flag. If -A was supplied, we signal that we should continue on. However,
subsequent lines will not even bothere to try and process the line. We
have reached the match count, so even if the next line would match then
we must process it if it hadn't. Thus, the loop in procfile() can
short-circuit and just process the line as a non-match until
procmatches() indicates that it's safe to stop.
A test has been added to reflect both that we should be picking up the
next line and that the next line should be considered a non-match even
if it should have been.
PR: 253350
MFC-after: 3 days
The null pattern semantics were terrible because I tried to match gnugrep,
but I got it wrong. Let's unwind that:
- The null pattern should match every line if neither -w nor -x.
- The null pattern should match empty lines if -x.
- The null pattern should not match any lines if -w.
The first two will stop processing (shortcut) even if additional patterns
are specified. In any other case, we will continue processing other
patterns. If no other patterns are specified beside a null pattern, then
we match if neither -w nor -x or set and do not match if either of those
are specified.
The justification for -w is that it should match on a whole word, but the
null pattern deos not have a whole word to match on.
Empty pattern files should never match anything, and more importantly, -v
should cause everything to be written.
PR: 253209
MFC-after: 4 days
SVN r343917 fixed this for in-tree clang, but when building with a newer
out-of-tree clang the test was still marked as XFAIL.
Reviewed By: dim
Differential Revision: https://reviews.freebsd.org/D28390
Add shims to map NetBSD's API to CPUSET(9). Obviously the invalid input
parts of these tests are relatively useless since we're just testing the
shims that aren't used elsewhere, there's still some amount of value in
the parts testing valid inputs.
Differential Revision: https://reviews.freebsd.org/D27307
Part of the libregex functionality leaked into the tests it shares with
the standard regex(3). Introduce a P flag to set the REG_POSIX cflag to
indicate that libc regex should effectively do nothing while libregex should
specifically run it in non-extended mode.
This unbreaks the libc/regex test run.
Reported by: Jenkins
This is the last of the needed GNU expressions before we can unleash bsdgrep
by default. \b is effectively an agnostic equivalent of \< and \>, while
\B will match every space that isn't making a transition from
nonchar -> char or char -> nonchar.
Instead of using a simple global++ as the data race, with this change we
perform the increment by loading the global, delaying for a bit and then
storing back the incremented value. If I move the increment outside of the
mutex protected range, I can now see the data race with only 100 iterations
on amd64 in almost all cases. Before this change such a racy test almost
always passed with < 100,000 iterations and only reliably failed with the
current limit of 10 million.
I noticed this poorly written test because the mutex:mutex{2,3} and
timedmutex:mutex{2,3} tests were always timing out on our CheriBSD Jenkins.
Writing good concurrency tests is hard so I won't attempt to do so, but this
change should make the test more likely to fail if pthread_mutex_lock is not
implemented correctly while also significantly reducing the time it takes to
run these four tests. It will also reduce the time it takes for QEMU RISC-V
testsuite runs by almost 40 minutes (out of currently 7 hours).
Reviewed By: brooks, ngie
Differential Revision: https://reviews.freebsd.org/D26473
This fixes a "suggested parens" compile warning-into-error
that shows up on gcc-6.4.
Reviewed by: ngie
Differential Revision: https://reviews.freebsd.org/D26789
As of r363471, tmpfs is included in all GENERIC kernel configs. This
results in a warning being emitted for each call to kldload(8):
module_register: cannot register tmpfs from tmpfs.ko; already loaded from kernel
Check for the presence of the module via kldstat first to quiet this
warning.
Reviewed by: asomers, arichardson
Differential Revision: https://reviews.freebsd.org/D26632
An old it_value of {4,3} is valid. Allow it.
Reviewed by: bdrewery
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D26445
zgrep should exit with success when given multiple files and the
pattern is found in at least one file. Prior to this change,
it would exit with success only if the pattern was found in _every_ file.
Reviewed by: dab ngie
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D26616
got_sigalrm is a global with external linkage and must therefore have a
previous extern declaration. There's no reason to maintain the status quo
there, so just make it static.
The result var is unused.
This part of the test has not been upstreamed, presumably because it exists
solely for sem_clockwait_np. We should perhaps consider moving it into its
own test file outside of ^/contrib/netbsd-tests, but this can happen later.
MFC after: 1 week
v1.17 of this file included a fix that I just submitted upstream to fix a
warning about prevent_inline with external linkage not having been
previously declared.
MFC after: 1 week
In IEEE 1003.1-2008 [1] and earlier revisions, BRE/ERE grammar allows for
any character to be escaped, but "ORD_CHAR preceded by an unescaped
<backslash> character [gives undefined results]".
Historically, we've interpreted an escaped ordinary character as the
ordinary character itself. This becomes problematic when some extensions
give special meanings to an otherwise ordinary character
(e.g. GNU's \b, \s, \w), meaning we may have two different valid
interpretations of the same sequence.
To make this easier to deal with and given that the standard calls this
undefined, we should throw an error (EESCAPE) if we run into this scenario
to ease transition into a state where some escaped ordinaries are blessed
with a special meaning -- it will either error out or have extended
behavior, rather than have two entirely different versions of undefined
behavior that leave the consumer of regex(3) guessing as to what behavior
will be used or leaving them with false impressions.
This change bumps the symbol version of regcomp to FBSD_1.6 and provides the
old escape semantics for legacy applications, just in case one has an older
application that would immediately turn into a pumpkin because of an
extraneous escape that's embedded or otherwise critical to its operation.
This is the final piece needed before enhancing libregex with GNU extensions
and flipping the switch on bsdgrep.
[1] http://pubs.opengroup.org/onlinepubs/9699919799.2016edition/
PR: 229925 (exp-run, courtesy of antoine)
Differential Revision: https://reviews.freebsd.org/D10510
- Handle whitespace with long flags that take arguments:
echo 'foo bar' > test
zgrep --regexp='foo bar' test
- Do not hang reading from stdin with patterns in a file:
echo foobar > test
echo foo > pattern
zgrep -f pattern test
zgrep --file=pattern test
- Handle any flags after -e:
echo foobar > test
zgrep -e foo --ignore-case < test
These two are still outstanding problems:
- Does not handle flags that take an argument if there is no
whitespace:
zgrep -enfs /etc/rpc
- When more than one -e pattern used matching should occur for all
patterns (similar to multiple patterns supplied with -f file).
Instead only the last pattern is used for matching:
zgrep -e rex -e nfs /etc/rpc
(This problem is masked in the unpatched version by the "any
flags after -e" problem.)
Add tests for the above problems.
Update the mange and add references to gzip(1) and zstd(1) and also
document the remaining known problems.
PR: 247126
Approved by: markj
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D25613
