Commit Graph

22 Commits

Author SHA1 Message Date
Warner Losh
0897438a74 Pass the device_t into atkbd_{probe,attach}_unit and get the
controller unit and keyboard unit from there. It will be needed
for other things in the future as well...
2013-01-11 21:42:23 +00:00
John Baldwin
ce7a3e4774 - If the atkbdc device is assigned an IRQ resource by ACPI or the PnPBIOS,
allow the child atkbd device to reuse that IRQ resource instead of
  reallocating the same IRQ from the parent bus inside the atkbd driver.
- Don't allocate a shared IRQ for the atkbd driver.  For AT keyboard
  devices on an ISA bus the IRQ is not shareable.  Instead, the bus driver
  should mark the IRQ shareable if the bus supports shared IRQs.
- Don't identify child devices until after the atkbdc device itself has
  attached.
2010-12-16 17:14:37 +00:00
Wojciech A. Koszek
259699b294 Remove explicit calls to keyboard methods with their respective variants
implemented with macros. This patch improves code readability. Reasoning
behind kbdd_* is a "keyboard discipline".

List of macros is supposed to be complete--all methods of keyboard_switch
should have their respective macros from now on.

Functionally, this code should be no-op. My intention is to leave current
behaviour of code as is.

Glanced at by:	rwatson
Reviewed by:	emax, marcel
Approved by:	cognet
2007-12-29 21:55:25 +00:00
Paolo Pisati
ef544f6312 o break newbus api: add a new argument of type driver_filter_t to
bus_setup_intr()

o add an int return code to all fast handlers

o retire INTR_FAST/IH_FAST

For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current

Reviewed by: many
Approved by: re@
2007-02-23 12:19:07 +00:00
Marius Strobl
520b635320 - Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source
files after they were repo-copied to sys/dev/atkbdc. The sources of
  atkbdc(4) and its children were moved to the new location in preparation
  for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in
  order to not further scatter them over the whole tree which would have
  been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another
  reason for the repo-copies was that some of the sources were misfiled,
  e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging
  atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly.
  Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't
  ISA-specific.
- Separate the parts of atkbdc_isa.c which aren't actually ISA-specific
  but are shareable between different atkbdc(4) bus front-ends into
  atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use
  bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource()
  respectively in atkbdc_isa.c instead of rolling own versions.
- Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for
  atkbdc(4). PS/2 controllers and input devices are used on a couple of
  Sun OEM boards and occur on either the EBus or the ISA bus. Depending on
  the board it's either the only on-board mean to connect a keyboard and
  mouse or an alternative to either RS232 or USB devices.
- Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled
  without isa(4) (e.g. for EBus-only machines). This ISA-specific part
  isn't separated into its own source file, yet, as it requires more work
  than was feasible for 6.0 in order to do it in a clean way. Actually
  philip@ is working on a rewrite of psm(4) so a more comprehensive
  clean-up and separation of hardware dependent and independent parts is
  expected to happen after 6.0.

Tested on:	i386, sparc64 (AX1105, AXe and AXi boards)
Reviewed by:	philip
2005-06-10 20:56:38 +00:00
Poul-Henning Kamp
5dba30f15a add missing #include <sys/module.h> 2004-05-30 20:27:19 +00:00
Nate Lawson
5f96beb9e0 Convert callers to the new bus_alloc_resource_any(9) API.
Submitted by:	Mark Santcroos <marks@ripe.net>
Reviewed by:	imp, dfr, bde
2004-03-17 17:50:55 +00:00
David E. O'Brien
8c9bbf484a Use __FBSDID(). 2003-06-11 00:34:37 +00:00
Mark Murray
51da11a27a Fix some easy, global, lint warnings. In most cases, this means
making some local variables static. In a couple of cases, this means
removing an unused variable.
2003-04-30 12:57:40 +00:00
Kazutaka YOKOTA
275658afcc Reinitialize the keyboard after the ACPI resume event.
I am not sure if this is absolutely necessary on all systems.  Yet,
there certainly are motherboards and notebook systems which require
this, although there are other systems which just don't.  I hope we
shall know when to do this on which systems, as the development of our
ACPI subsystem progresses...  (I know we didn't need this for the APM
resume.)
2001-09-23 08:42:06 +00:00
Kazutaka YOKOTA
cd6cd68d18 Refine ACPI/PnP BIOS probe/attach routines a bit.
- Add workaround for the problematic PnP BIOS which does not assign
  irq resource for the PS/2 mouse device node; if there is no irq
  assigned for the PS/2 mouse node, refer to device.hints for an
  irq number. If we still don't find an irq number in the hints
  database, use a hard-coded value.
- Delete unused ivars.
- Bit of clean up in probe/attach.
- Add PnP ID for the PS/2 mouse port on some IBM ThinkPad models.
2001-09-15 04:38:20 +00:00
Kazutaka YOKOTA
ef92e4471a Update the atkbdc, atkbd, and psm drivers to probe/attach
more cleanly and consistently in all APCI, PnP BIOS, and "hint"
cases.

NOTE: this doesn't necessarily solve the problem that the PS/2
mouse is not detected after the recent ACPI update.
2001-09-06 12:09:26 +00:00
Kazutaka YOKOTA
764952572b Return consistent key action codes at key press and release
events. Otherwise you would see unexpected results if shift or
locking keys are defined to give different actions depending
on other shift/locking keys' state.

Please keep the ukbd module and the kernel in sync, otherwise
the USB keyboard won't work after this change.
MFC after:	10 days
2001-07-20 13:05:57 +00:00
Kazutaka YOKOTA
6c726162da Add the device resume method to keyboard drivers.
MFC after:	4 weeks
2001-06-30 10:02:32 +00:00
Kazutaka YOKOTA
db3e34cb71 - Properly keep track of I/O port resources.
- Use bus_space_read/write() to access the ports.
2000-03-19 03:25:13 +00:00
Peter Wemm
8f8e587948 Use config's conditional compilation rather than using #ifdefs that make
modular compilation harder.  I'm doing this because people seem to like
cut/pasting examples of bad practices in existing code.
2000-01-29 15:08:56 +00:00
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
Kazutaka YOKOTA
800da3b22a - Remove cdevsw entry points in individual keyboard drivers;
instead, use generic entry points for all drivers.
- Eliminate bogus makedev().
- Eliminate softc in the lower drivers, as it is no longer necessary.

Submitted (95%) by: phk
1999-08-22 09:52:33 +00:00
Doug Rabson
566643e39e Move the declaration of the interrupt type from the driver structure
to the BUS_SETUP_INTR call.
1999-05-08 21:59:43 +00:00
Peter Wemm
6182fdbda8 Bring the 'new-bus' to the i386. This extensively changes the way the
i386 platform boots, it is no longer ISA-centric, and is fully dynamic.
Most old drivers compile and run without modification via 'compatability
shims' to enable a smoother transition.  eisa, isapnp and pccard* are
not yet using the new resource manager.  Once fully converted, all drivers
will be loadable, including PCI and ISA.

(Some other changes appear to have snuck in, including a port of Soren's
 ATA driver to the Alpha.  Soren, back this out if you need to.)

This is a checkpoint of work-in-progress, but is quite functional.

The bulk of the work was done over the last few years by Doug Rabson and
Garrett Wollman.

Approved by:	core
1999-04-16 21:22:55 +00:00
Kazutaka YOKOTA
e9deda23ae Keyboard driver update in preparation for the USB keyboard driver.
- Refined internal interface in keyboard drivers so that:
  1. the side effect of device probe is kept minimal,
  2. polling mode function is added,
  3. and new ioctl and configuration options are added (see below).

- Added new ioctl: KDSETREPEAT
  Set keyboard typematic rate.  There has existed an ioctl command,
  KDSETRAD, for the same purpose.  However, KDSETRAD is dependent on
  the AT keyboard.  KDSETREPEAT provides more generic interface.
  KDSETRAD will still be supported in the atkbd driver.

- Added new configuration options:
  ATKBD_DFLT_KEYMAP
  Specify a keymap to be used as the default, built-in keymap.
  (There has been undocumented options, DKKEYMAP, UKKEYMAP, GRKEYMAP,
  SWKEYMAP, RUKEYMAP, ESKEYMAP, and ISKEYMAP to set the default keymap.
  These options are now gone for good.  The new option is more general.)

  KBD_DISABLE_KEYMAP_LOADING
  Don't allow the user to change the keymap.
1999-03-10 10:36:53 +00:00
Doug Rabson
8a99777019 Update the alpha port to use the new syscons.
Submitted by: Kazutaka YOKOTA <yokota@zodiac.mech.utsunomiya-u.ac.jp> (partly)
1999-01-23 16:53:30 +00:00