Commit Graph

10020 Commits

Author SHA1 Message Date
Jeff Roberson
03d03260b2 - Use rufetchcalc() rather than calcru() in ttyinfo so that we get
correct system and user time stats.

Approved by:	re
Reported by:	kris
Discussed with:	Attilio
2007-07-01 00:17:59 +00:00
Robert Watson
dc2e1e3fae Use vm_offset_t for kmembase and kmemlimit rather than char *, avoiding
unnecessary casts, and making it possible to compile kern_malloc.c with
strict aliasing.

Submitted by:	rdivacky
Approved by:	re (kensmith)
2007-06-27 13:39:38 +00:00
Attilio Rao
6a0ce57d10 Fix an old standing LOR between callout_lock and sleepqueues chain (which
could lead to a deadlock).
- sleepq_set_timeout acquires callout_lock (via callout_reset()) only
  with sleepq chain lock held
- msleep_spin in _callout_stop_safe lock the sleepqueue chain with
  callout_lock held

In order to solve this don't use msleep_spin in _callout_stop_safe() but
use directly sleepqueues as inline msleep_spin code. Rearrange the
wakeup path in order to have it consistent too.

Reported by: kris (via stress2 test suite)
Tested by: Timothy Redaelli <drizzt@gufi.org>
Reviewed by: jhb
Approved by: jeff (mentor)
Approved by: re
2007-06-26 21:42:01 +00:00
Attilio Rao
f08945a7d2 Introduce a new rwlocks initialization function: rw_init_flags.
This is very similar to sx_init_flags: it initializes the rwlock using
special flags passed as third argument (RW_DUPOK, RW_NOPROFILE,
RW_NOWITNESS, RW_QUIET, RW_RECURSE).
Among these, the most important new feature is probabilly that rwlocks
can be acquired recursively now (for both shared and exclusive paths).

Because of the recursion counter, the ABI is changed.

Tested by: Timothy Redaelli <drizzt@gufi.org>
Reviewed by: jhb
Approved by: jeff (mentor)
Approved by: re
2007-06-26 21:31:56 +00:00
Rong-En Fan
534046e301 - Remove UMAP filesystem. It was disconnected from build three years ago,
and it is seriously broken.

Discussed on:   freebsd-arch@
Approved by:	re (mux)
2007-06-25 05:06:57 +00:00
Konstantin Belousov
9bc911d4a2 devfs_free() calls free_unr(), that may sleep.
Postpone call to devfs_free() after cdev mutex is dropped. Reuse
cdp_list link for queuing devices awaiting deletion in the
cdevp_free_list.

Reported by:	Hans Petter Selasky <hselasky c2i net>
Tested by:	Peter Holm
Approved by:	re (kensmith)
MFC after:	2 weeks
2007-06-19 13:19:23 +00:00
Konstantin Belousov
7550e3eac4 Add the witness warning for free_unr. Function could sleep, thus callers
shall not have any non-sleepable locks held.

Submitted by:	Hans Petter Selasky <hselasky c2i net>
Approved by:	re (kensmith)
2007-06-19 13:13:17 +00:00
Pawel Jakub Dawidek
dfe97ff4a5 We only flush entries related to the given file system. Currently there are
no 'invalid' cache entires - file system is responsible for keeping it that
way. The comment should have been updated in rev.1.25.
2007-06-18 09:28:24 +00:00
Robert Watson
7251b7863c Rather than passing SUSER_RUID into priv_check_cred() to specify when
a privilege is checked against the real uid rather than the effective
uid, instead decide which uid to use in priv_check_cred() based on the
privilege passed in.  We use the real uid for PRIV_MAXFILES,
PRIV_MAXPROC, and PRIV_PROC_LIMIT.  Remove the definition of
SUSER_RUID; there are now no flags defined for priv_check_cred().

Obtained from:	TrustedBSD Project
2007-06-16 23:41:43 +00:00
Marius Strobl
79be8b5082 - Remove zstty spin lock for no longer existing zs(4).
- Move the rtc_mtx spin lock out from under #ifdef SMP as it's just
  not SMP-specific.
- Add a new spin lock pcib_mtx for locking "fast" interrupt handlers
  of host-to-PCI bridge drivers on sparc64.
2007-06-16 23:30:57 +00:00
Jeff Roberson
dda713dfb8 - Fix an off by one error in sched_pri_range.
- In tdq_choose() only assert that a thread does not have too high a
   priority (low value) for the queue we removed it from.  This will catch
   bugs in priority elevation.  It's not a serious error for the thread
   to have too low a priority as we don't change queues in this case as
   an optimization.

Reported by:	kris
2007-06-15 19:33:58 +00:00
Robert Watson
7e273744a6 Remove the restriction that rtprio(2) cannot be used to set the realtime
or idle priority of another process owned by the same user.  This means
that privilege in rtprio(2) (and rtprio_thread(2)) is required indirectly
via p_cansched(9) or directly to set realtime/idle privilege, rather than
directly affecting target process authorization.
2007-06-14 23:31:52 +00:00
Robert Watson
b4be6ef22f Only require privilege to set the current time adjustment, not in order to
query it.
2007-06-14 18:37:58 +00:00
Robert Watson
3805385e3d Spell statistics more correctly in comments. 2007-06-14 03:02:33 +00:00
John Baldwin
34a9edafbc Improve the ktrace locking somewhat to reduce overhead:
- Depessimize userret() in kernels where KTRACE is enabled by doing an
  unlocked check of the per-process queue of pending events before
  acquiring any locks.  Previously ktr_userret() unconditionally acquired
  the global ktrace_sx lock on every return to userland for every thread,
  even if ktrace wasn't enabled for the thread.
- Optimize the locking in exit() to first perform an unlocked read of
  p_traceflag to see if ktrace is enabled and only acquire locks and
  teardown ktrace if the test succeeds.  Also, explicitly disable tracing
  before draining any pending events so the pending events actually get
  written out.  The unlocked read is safe because proc lock is acquired
  earlier after single-threading so p_traceflag can't change between then
  and this check (well, it can currently due to a bug in ktrace I will fix
  next, but that race existed prior to this change as well).

Reviewed by:	rwatson
2007-06-13 20:01:42 +00:00
John Baldwin
ce0be64687 Conditionally acquire Giant when dropping a reference on the ktrace vnode
during execve() when turning off tracing due to executing a setuid binary
as non-root.  Previously this could fail to acquire Giant and fail an
assertion if the ktrace file was on a non-MPSAFE filesystem and the
executable was on an MPSAFE filesystem.

MFC after:	3 days
Reported by:	kris
2007-06-13 19:41:47 +00:00
Jeff Roberson
3036ab79e3 - Include opt_sched.h for SCHED_STATS. 2007-06-12 23:27:31 +00:00
Jeff Roberson
671f2709ae - Garbage collect unused concurrency functions. 2007-06-12 19:50:31 +00:00
Jeff Roberson
e7c8d2e9fe - Garbage collect unused concurrency functions.
- Remove unused kse fields from struct proc.
 - Group remaining fields and #ifdef KSE them.
 - Move some kern_kse.c only prototypes out of proc and into kern_kse.

Discussed with:	Julian
2007-06-12 19:49:39 +00:00
Jeff Roberson
fe54587ffa - Move some common code out of sched_fork_exit() and back into fork_exit(). 2007-06-12 07:47:09 +00:00
Jeff Roberson
ff8fbcffcb Solve a complex exit race introduced with thread_lock:
- Add a count of exiting threads, p_exitthreads, to struct proc.
 - Increment p_exithreads when we set the deadthread in thread_exit().
 - When we thread_stash() a deadthread use an atomic to drop the count.
 - Spin until the p_exithreads count reaches 0 in thread_wait().
 - Lock the last exiting thread momentarily to be certain that it has
   exited cpu_throw().
 - Restructure thread_wait().  It does not need a loop as there will only
   ever be one thread.

Tested by:	moose@opera.com
Reported by:	kris, moose@opera.com
2007-06-12 07:24:46 +00:00
Robert Watson
32f9753cfb Eliminate now-unused SUSER_ALLOWJAIL arguments to priv_check_cred(); in
some cases, move to priv_check() if it was an operation on a thread and
no other flags were present.

Eliminate caller-side jail exception checking (also now-unused); jail
privilege exception code now goes solely in kern_jail.c.

We can't yet eliminate suser() due to some cases in the KAME code where
a privilege check is performed and then used in many different deferred
paths.  Do, however, move those prototypes to priv.h.

Reviewed by:	csjp
Obtained from:	TrustedBSD Project
2007-06-12 00:12:01 +00:00
Jeff Roberson
efe641b939 - Add a missing PROC_SUNLOCK() in tdsignal() 2007-06-11 23:27:03 +00:00
Olivier Houchard
e411ce026a Re-acquire the PROC_SLOCK before calling calcru(), and release it after,
since calcru() expects it to be locked.

Reviewed by:	attilio
2007-06-11 21:05:41 +00:00
Sam Leffler
68e8e04e93 Update 802.11 wireless support:
o major overhaul of the way channels are handled: channels are now
  fully enumerated and uniquely identify the operating characteristics;
  these changes are visible to user applications which require changes
o make scanning support independent of the state machine to enable
  background scanning and roaming
o move scanning support into loadable modules based on the operating
  mode to enable different policies and reduce the memory footprint
  on systems w/ constrained resources
o add background scanning in station mode (no support for adhoc/ibss
  mode yet)
o significantly speedup sta mode scanning with a variety of techniques
o add roaming support when background scanning is supported; for now
  we use a simple algorithm to trigger a roam: we threshold the rssi
  and tx rate, if either drops too low we try to roam to a new ap
o add tx fragmentation support
o add first cut at 802.11n support: this code works with forthcoming
  drivers but is incomplete; it's included now to establish a baseline
  for other drivers to be developed and for user applications
o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates
  prepending mbufs for traffic generated locally
o add support for Atheros protocol extensions; mainly the fast frames
  encapsulation (note this can be used with any card that can tx+rx
  large frames correctly)
o add sta support for ap's that beacon both WPA1+2 support
o change all data types from bsd-style to posix-style
o propagate noise floor data from drivers to net80211 and on to user apps
o correct various issues in the sta mode state machine related to handling
  authentication and association failures
o enable the addition of sta mode power save support for drivers that need
  net80211 support (not in this commit)
o remove old WI compatibility ioctls (wicontrol is officially dead)
o change the data structures returned for get sta info and get scan
  results so future additions will not break user apps
o fixed tx rate is now maintained internally as an ieee rate and not an
  index into the rate set; this needs to be extended to deal with
  multi-mode operation
o add extended channel specifications to radiotap to enable 11n sniffing

Drivers:
o ath: add support for bg scanning, tx fragmentation, fast frames,
       dynamic turbo (lightly tested), 11n (sniffing only and needs
       new hal)
o awi: compile tested only
o ndis: lightly tested
o ipw: lightly tested
o iwi: add support for bg scanning (well tested but may have some
       rough edges)
o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data
o wi: lightly tested

This work is based on contributions by Atheros, kmacy, sephe, thompsa,
mlaier, kevlo, and others.  Much of the scanning work was supported by
Atheros.  The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
Attilio Rao
393a081d42 Optimize vmmeter locking.
In particular:
- Add an explicative table for locking of struct vmmeter members
- Apply new rules for some of those members
- Remove some unuseful comments

Heavily reviewed by: alc, bde, jeff
Approved by: jeff (mentor)
2007-06-10 21:59:14 +00:00
Matt Jacob
a659386c7e Remove unused variable. 2007-06-10 01:50:05 +00:00
Matt Jacob
26756b7a58 The new compiler can't quite follow the logic of has_stime and
complains about using uninitialized tags in stime.
2007-06-10 01:49:17 +00:00
Matt Jacob
9b73d2396a Initialized ets to zero. This is arguably a gcc bug in that ets is always
set to rts when timeout is non-NULL and then timevalid is set and ets is
only checked later when timervalid is set.
2007-06-10 01:43:11 +00:00
Attilio Rao
bdf08be439 Fix a bug caming from the committing a pre-merge version of the patch
instead than a post-merge version (respect to another rusage fix).

Reported by: marcel
Approved by: jeff(mentor)
2007-06-10 00:28:41 +00:00
Marcel Moolenaar
55b5660de4 Work around an integer overflow in expression `3 * maxbufspace / 4',
when maxbufspace is larger than INT_MAX / 3. The overflow causes a
hard hang on ia64 when physical memory is sufficiently large (8GB).
2007-06-09 23:41:14 +00:00
Attilio Rao
a1fe14bc33 rufetch and calcru sometimes should be called atomically together.
This patch fixes places where they should be called atomically changing
their locking requirements (both assume per-proc spinlock held) and
introducing rufetchcalc which wrappers both calls to be performed in
atomic way.

Reviewed by: jeff
Approved by: jeff (mentor)
2007-06-09 21:48:44 +00:00
Attilio Rao
86a49dea5b Since locking in kern/subr_prof.c is changed a bit, we need nomore of
time_lock spinlock exported.

Approved by: jeff (mentor)
2007-06-09 19:41:14 +00:00
Attilio Rao
a140976eb4 The current rusage code show peculiar problems:
- Unsafeness on ruadd() in thread_exit()
- Unatomicity of thread_exiit() in the exit1() operations

This patch addresses these problems allocating p_fd as part of the
process and modifying the way it is accessed.

A small chunk of this patch, resolves a race about p_state in kern_wait(),
since we have to be sure about the zombif-ing process.

Submitted by: jeff
Approved by: jeff (mentor)
2007-06-09 18:56:11 +00:00
Matt Jacob
65d32cd8fb Propagate volatile qualifier to make gcc4.2 happy. 2007-06-09 18:09:37 +00:00
Attilio Rao
e682569165 Remove the MUTEX_WAKE_ALL option and make it the default behaviour for our
mutexes.
Currently we alredy force MUTEX_WAKE_ALL beacause of some problems with the
!MUTEX_WAKE_ALL case (unavioidable priority inversion).
2007-06-08 21:36:52 +00:00
Poul-Henning Kamp
7acfb0af82 Double the WITNESS and DIAGNOSTIC benchmark warnings right before we
go into userland to improve the chances of people noticing them.
2007-06-08 11:47:36 +00:00
Xin LI
7b8c8b858c In getblk(), before gbincore(), use BO_LOCK directly when locking
the bufobj, rather than using VI_LOCK, like what was done with
revision 1.453.
2007-06-08 07:05:08 +00:00
Robert Watson
faef53711b Move per-process audit state from a pointer in the proc structure to
embedded storage in struct ucred.  This allows audit state to be cached
with the thread, avoiding locking operations with each system call, and
makes it available in asynchronous execution contexts, such as deep in
the network stack or VFS.

Reviewed by:	csjp
Approved by:	re (kensmith)
Obtained from:	TrustedBSD Project
2007-06-07 22:27:15 +00:00
John Baldwin
a66fde8d35 - Remove unused variable from create_thread().
- Move kern_thr_*() prototype to <sys/syscallsubr.h> where all the other
  kern_*() prototypes live.
2007-06-07 19:45:19 +00:00
David Xu
42ce445fed Backout experimental adaptive-spin umtx code. 2007-06-06 07:35:08 +00:00
Jeff Roberson
710eacdc5f - Placing the 'volatile' on the right side of the * in the td_lock
declaration removes the need for __DEVOLATILE().

Pointed out by:	tegge
2007-06-06 03:40:47 +00:00
Attilio Rao
d301eb10c7 Fix a problem with not-preemptive kernels caming from mis-merging of
existing code with the new thread_lock patch.
This also cleans up a bit unlock operation for mutexes.

Approved by: jhb, jeff(mentor)
2007-06-05 18:57:09 +00:00
Konstantin Belousov
b95b98b0bd Restore non-SMP build.
Reviewed by:	attilio
2007-06-05 14:20:13 +00:00
Jeff Roberson
95e3a0bca3 - Better fix for previous error; use DEVOLATILE on the td_lock pointer
it can actually sometimes be something other than sched_lock even on
   schedulers which rely on a global scheduler lock.

Tested by:	kan
2007-06-05 04:12:46 +00:00
Jeff Roberson
c219b097af - Pass &sched_lock as the third argument to cpu_switch() as this will
always be the correct lock and we don't get volatile warnings this
   way.

Pointed out by:	kan
2007-06-05 03:46:54 +00:00
Jeff Roberson
36b369163b - Define TDQ_ID() for the !SMP case.
- Default pick_pri to off.  It is not faster in most cases.
2007-06-05 02:53:51 +00:00
Jeff Roberson
8e0185f604 - Remove sched_core.c. The maintainer has lost interest in pursuing this
and it has been neglected in the recent ksegrp removal as well as
   the thread_lock() changes.

Discussed with:	davidxu
2007-06-05 00:12:37 +00:00
Jeff Roberson
982d11f836 Commit 14/14 of sched_lock decomposition.
- Use thread_lock() rather than sched_lock for per-thread scheduling
   sychronization.
 - Use the per-process spinlock rather than the sched_lock for per-process
   scheduling synchronization.

Tested by:      kris, current@
Tested on:      i386, amd64, ULE, 4BSD, libthr, libkse, PREEMPTION, etc.
Discussed with: kris, attilio, kmacy, jhb, julian, bde (small parts each)
2007-06-05 00:00:57 +00:00
Jeff Roberson
bd43e47156 Commit 10/14 of sched_lock decomposition.
- Add new spinlocks to support thread_lock() and adjust ordering.

Tested by:      kris, current@
Tested on:      i386, amd64, ULE, 4BSD, libthr, libkse, PREEMPTION, etc.
Discussed with: kris, attilio, kmacy, jhb, julian, bde (small parts each)
2007-06-04 23:55:45 +00:00