illumos/illumos-gate@000cce6b6f000cce6b6fhttps://www.illumos.org/issues/8592
ZFS channel programs should be able to perform a rollback. This logic will
probably look pretty similar to zfs.sync.destroy().
Reviewed by: Chris Williamson <chris.williamson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Brad Lewis <brad.lewis@delphix.com>
MFC after: 5 weeks
X-MFC after: r324163
illumos/illumos-gate@ed992b0aaced992b0aachttps://www.illumos.org/issues/8604
Every time we want to unmount a snapshot (happens during snapshot deletion or
renaming) we unnecessarily iterate through all the mountpoints in the VFS layer
(see zfs_get_vfs).
Ideally we would just put a hold on the snapshot and access its respective VFS
resource directly.
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Andy Stormont <astormont@racktopsystems.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Serapheim Dimitropoulos <serapheim@delphix.com>
FreeBSD note: I added a FreeBSD specific function getzfsvfs_ref() which
is like getzfsvfs() but returns a filesystem referenced, not busied.
We want a busied filesystem in most cases, because we access its private
data and, thus, we need to prevent the filesystem from being unmounted
and its private data destroyed. But in some cases we can either get
away with just a referenced filesystem or we must not busy the
filesystem. Unmounting the filesystem is one of such cases.
MFC after: 5 weeks
X-MFC after: r324163
mark the page as referenced rather than calling vm_page_activate(). This
allows the page's act_count to grow beyond ACT_INIT and better reflect
its usage. (See also r324146, which modified a function used by tmpfs,
uiomove_object_page(), to behave in the same way.)
Reviewed by: kib, markj
MFC after: 2 weeks
attachment code for various SOCs and busses. Remove all the static and
should-have-been-static and named-differently instances of it.
This should eliminate the recently-grown build warnings about multiple
definitions when building arm kernels.
The existing ti_pruss driver for the PRUSS Hardware provided by the AM335x
ARM CPU has basic interrupt capabilities. This updated driver provides some
more options:
- Sysctl based configuration for the interrupts (for some examples, see the
test plan in the phabricator review cited below).
- A device file (/dev/pruss0.irqN) for each enabled interrupt. This file
can be read and the device blocks if no irq has happened or returns an
uint64_t timestamp based on nanouptime().
- Each interrupt device file provides kqueue-based event notification,
blocking read(), or select().
Submitted by: Manuel Stuhn <freebsdnewbie@freenet.de>
Differential Revision: https://reviews.freebsd.org/D11959
- Added more compatibility strings to drivers not yet converted
- Added new RPI platform code compatibility string to match the ones used
upstream
- Adapted RPI and RPI2 DTS to match the new platform code compatibility
string
The goal is to use the upstream DTBs as a replacement for our custom one.
This is now possible with these changes.
Additionally, as the RPI firmware automatically chooses the right DTB for
us, this would allow to have one common armv6 kernel for RPI0 and RPI1
(BCM2835-based), and one common armv7 kernel for RPI2 v1.1 (BCM2836-based),
and RPI2 v1.2 / RPI3 (BCM2837-based).
Submitted by: Sylvain Garrigues <sylgar@gmail.com>
Differential Revision: https://reviews.freebsd.org/D12360
not extraneous in the TCP Fast Open (TFO) passive-open case. In the
TFO passive-open case, syncache_socket() is being called during
processing of a TFO SYN bearing a valid cookie, and a call to
soisconnected() is required in order to allow the application to
immediately consume any data delivered in the SYN and to have a chance
to generate response data to accompany the SYN-ACK. The removal of
this call to soisconnected() effectively converted all TFO passive
opens to having the same RTT cost as a standard 3WHS.
This commit adds a call to soisconnected() to syncache_tfo_expand() so
that it is only in the TFO passive-open path, thereby restoring TFO
passve-open RTT performance and preserving the non-TFO connection-rate
performance gains realized by r307966.
MFC after: 1 week
Sponsored by: Limelight Networks
been destroyed before its tcptw with INVARIANTS undefined.
This is a symmetric change of r307551:
A INP_TIMEWAIT inp should not be destroyed before its tcptw, and INVARIANTS
will catch this case. If INVARIANTS is undefined it will emit a log(LOG_ERR)
and avoid a hard to debug infinite loop in tcp_tw_2msl_scan().
Reported by: Ben Rubson, hselasky
Submitted by: hselasky
Tested by: Ben Rubson, jch
MFC after: 1 week
Sponsored by: Verisign, inc
Differential Revision: https://reviews.freebsd.org/D12267
machine independent parts of the existing code to a new file that can be
shared between amd64 and arm64.
Reviewed by: kib (previous version), imp
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D12434
illumos/illumos-gate@5f39f884e25f39f884e2https://www.illumos.org/issues/8605
zfs.exists() in channel programs doesn't return any result, and should have a
man page entry.
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Chris Williamson <chris.williamson@delphix.com>
MFC after: 5 weeks
X-MFC after: r324163
common case where it's needed -- a write followed by a read to the same slave.
The i2c controller in this chip only performs complete transfers, it does
not provide control over start/repeat-start/stop operations on the bus.
Thus, we have gotten a full stop/start sequence rather than a repeat-start
when doing a typical i2c slave access of "write address, read data". Some
i2c slave devices require a repeat-start to work correctly.
These changes cause the controller to do a repeat-start by pre-staging the
read parameters in the controller registers immediate after the controller
has latched the values for the initial write operation, but before any
bytes are actually written. With the values pre-staged, when the write
portion of the transfer completes, the state machine in the silicon sees
a new start operation already staged and that causes it to perform a
repeat-start. The key to tricking the buggy hardware into doing this is
to avoid prefilling any output data in the transmit FIFO so that it is
possible to catch the silicon in the state where transmit values are
latched but the transmit isn't completed yet.
7431 ZFS Channel Programs
illumos/illumos-gate@dfc115332cdfc115332chttps://www.illumos.org/issues/7431
ZFS channel programs (ZCP) adds support for performing compound ZFS
administrative actions via Lua scripts in a sandboxed environment (with time
and memory limits).
This initial commit includes both base support for running ZCP scripts, and a
small initial library of API calls which support getting properties and
listing, destroying, and promoting datasets.
Testing: in addition to the included unit tests, channel programs have been in
use at Delphix for several months for batch destroying filesystems. The
dsl_destroy_snaps_nvl() call has also been replaced with
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Approved by: Garrett D'Amore <garrett@damore.org>
Author: Chris Williamson <chris.williamson@delphix.com>
8552 ZFS LUA code uses floating point math
illumos/illumos-gate@916c8d8811916c8d8811https://www.illumos.org/issues/8552
In the LUA interpreter used by "zfs program", the lua format() function
accidentally includes support for '%f' and friends, which can cause compilation
problems when building on platforms that don't support floating-point math in
the kernel (e.g. sparc). Support for '%f' friends (%f %e %E %g %G) should be
removed, since there's no way to supply a floating-point value anyway (all
numbers in ZFS LUA are int64_t's).
Reviewed by: Yuri Pankov <yuripv@gmx.com>
Reviewed by: Igor Kozhukhov <igor@dilos.org>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
8590 memory leak in dsl_destroy_snapshots_nvl()
illumos/illumos-gate@e6ab4525d1e6ab4525d1https://www.illumos.org/issues/8590
In dsl_destroy_snapshots_nvl(), "snaps_normalized" is not freed after it is
added to "arg".
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
FreeBSD notes:
- zfs-program.8 manual page is taken almost as is from the vendor repository,
no FreeBSD-ification done
- fixed multiple instances of NULL being used where an integer is expected
- replaced ETIME and ECHRNG with ETIMEDOUT and EDOM respectively
This commit adds a modified version of Lua 5.2.4 under
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/lua, mirroring the
upstream. See README.zfs in that directory for the description of Lua
customizations.
See zfs-program.8 on how to use the new feature.
MFC after: 5 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D12528
Use make_dev_s(9) to create device, since the device ioctl interface
needs to access si_drv1 to get softc pointer.
Remove the common but not functional attempt to prevent parallel
accesses by file descriptors by blocking more than one open. Either
threads in one process, or forked siblings, or file descriptors passed
over unix domain sockets all allow to execute parallel requests once
one fd is opened. Since ioctl handler uses smbus_request_bus() to
take the bus ownership, the correct mechanism establishes exclusive
access already.
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
When enabled by EEPROM, use it to relax translation address/size alignment
requirements for BAR2 window by 128 or 256 times.
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Previously, uiomove_object_page() would maintain LRU by requeuing the
accessed page. This involves acquiring one of the heavily contended page
queue locks. Moreover, it is unnecessarily expensive for pages in the
active queue.
As of r254304 the page daemon continually performs a slow scan of the
active queue, with the effect that unreferenced pages are gradually
moved to the inactive queue, from which they can be reclaimed. Prior to
that revision, the active queue was scanned only during shortages of
free and inactive pages, meaning that unreferenced pages could get
"stuck" in the queue. Thus, tmpfs was required to use the inactive queue
and requeue pages in order to maintain LRU. Now that this is no longer
the case, tmpfs I/O operations can use the active queue and avoid the
page queue locks in most cases, instead setting PGA_REFERENCED on
referenced pages to provide pseudo-LRU.
Reviewed by: alc (previous version)
MFC after: 2 weeks
Such updates consisted of vast majority of modificiations, especially
in tmpfs_reg_resize.
For the case where page count did no change and the size grew we only
need to update tn_size. Use this fact to avoid vm object lock/relock.
MFC after: 1 week
This patch modifies the pNFS client layout and deviceinfo structures
to add fields and unions for the Flex File Layout. Until a future
commit adds Flex File layout support, these new fields are not used.
This patch should not affect the "pnfs" option for File Layout.
The GCC xmmintrin.h header brokenly includes mm_malloc.h unconditionally.
(The Clang version of xmmintrin.h only includes mm_malloc.h if not compiling
in standalone mode.)
Hack around GCC's broken header by defining the include guard macro ahead of
including xmmintrin.h.
Reported by: lwhsu, jhb
Tested by: lwhsu
Sponsored by: Dell EMC Isilon
smb_strdupin() tried to roll a copyin() based strlen to allocate a buffer
and then blindly copyin that size. Of course, a malicious user program
could simultaneously manipulate the buffer, resulting in a non-terminated
string being copied.
Later assumptions in the code rely upon the string being nul-terminated.
Just use copyinstr() and drop the racy sizing.
PR: 222687
Reported by: Meng Xu <meng.xu AT gatech.edu>
Security: possible local DoS
Sponsored by: Dell EMC Isilon
Add flag to the makefile to allow loader compilation as
Little-Endian 32-bit executable.
Usage:
make WITH_LOADER_FORCE_LE=yes -C sys/boot all
Submitted by: Wojciech Macek <wma@freebsd.org>
Reviewed by: imp, nwhitehorn
Obtained from: Semihalf
Sponsored by: QCM Technologies
Differential revision: https://reviews.freebsd.org/D12421
* check mbuf length before doing mtod() and accessing to IP header;
* update oip pointer and all depending pointers after m_pullup();
* remove extra checks and extra parentheses, wrap long lines;
PR: 222670
Reported by: Prabhakar Lakhera
MFC after: 1 week
needed, but it silences an erroneous Coverity warning and makes the code a
little more logically consistent. Also mark the sysctl as MPSAFE.
Sponsored by: Netflix
This patch adds a NFSSTA_FLEXFILE flag that will be used to enable
Flexible File Layout for the NFSv4.1 pNFS client. It is not yet
used, but will be after a future commit adds Flex File Layout support.
This patch changes nfsv4_getipaddr() and nfsrpc_fillsa() to use
a sockaddr_in * and sockaddr_in6 * instead of sockaddr_storage, to
avoid allocating the latter on the stack. It also moves the nfsrpc_fillsa()
call to after the completion of parsing of the DeviceInfo reply from
the server. This patch is in preparation for addition of Flex File
Layout support in a future commit.
It only affects the "pnfs" NFSv4.1 client mount option and should not
have changed its semantics.
Defining a variable with the description and then only use it in the
SYSCTL declaration led to an unused variable warning. In the SYSCTL the
passed value is discarded using __DESCR.
pmap_remove_all(). If the object to which a page belongs has no
references, then that page cannot possibly be mapped.
Reviewed by: kib
MFC after: 1 week
Split the handlers for pop of invalid selectors from the trap frame
into usermode and kernel variants. Usermode handler is kept as is, it
restores the already loaded parts of the trap frame and jumps to set
up a signal delivery to the user process.
New kernel part of the handler emulates IRET treatment of the segments
which would violate access right. It loads NUL selector in the
segment register which load causes the fault, and then continues the
return to interrupted kernel code. Since invalid selectors in the
segment registers in the kernel mode can only exist while kernel still
enters or exits from userspace, we only zero invalid userspace
selectors. If userspace tries to use the segment register, it gets a
signal, as if the processor segment descriptor cache was reloaded.
Reported by: Maxime Villard <max@m00nbsd.net>
Suggested and reviewed by: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Do not return from interrupt using the POP_FRAME;iret instruction
sequence, always jump to doreti.
The user segments selectors saved on the stack might become invalid
because userspace manipulated LDT in a parallel thread. trap() is
aware of such issue, but it is only prepared to handle it at iret and
segment registers load operations in doreti path.
Also remove POP_FRAME macro because it is no longer used.
Reviewed by: bde, jhb (as part of r323722)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
