Commit Graph

87 Commits

Author SHA1 Message Date
Ermal Luçi
dce33a45c9 The patch provides the same socket option as Linux IP_ORIGDSTADDR.
Unfortunately they will have different integer value due to Linux value being already assigned in FreeBSD.

The patch is similar to IP_RECVDSTADDR but also provides the destination port value to the application.

This allows/improves implementation of transparent proxies on UDP sockets due to having the whole information on forwarded packets.

Reviewed by:	adrian, aw
Approved by:	ae (mentor)
Sponsored by:	rsync.net
Differential Revision:	D9235
2017-03-06 04:01:58 +00:00
Warner Losh
fbbd9655e5 Renumber copyright clause 4
Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.

Submitted by:	Jan Schaumann <jschauma@stevens.edu>
Pull Request:	https://github.com/freebsd/freebsd/pull/96
2017-02-28 23:42:47 +00:00
Ermal Luçi
c10c5b1eba Committed without approval from mentor.
Reported by:	gnn
2017-02-12 06:56:33 +00:00
Ermal Luçi
70d81c5e91 Use proper value for socket option on IPv6
Reported-by: ohartmann@walstatt.org
2017-02-10 06:20:27 +00:00
Ermal Luçi
ed55edceef The patch provides the same socket option as Linux IP_ORIGDSTADDR.
Unfortunately they will have different integer value due to Linux value being already assigned in FreeBSD.

The patch is similar to IP_RECVDSTADDR but also provides the destination port value to the application.

This allows/improves implementation of transparent proxies on UDP sockets due to having the whole information on forwarded packets.

Sponsored-by: rsync.net
Differential Revision: D9235
Reviewed-by: adrian
2017-02-10 05:16:14 +00:00
Andrey V. Elsukov
fcf596178b Merge projects/ipsec into head/.
Small summary
 -------------

o Almost all IPsec releated code was moved into sys/netipsec.
o New kernel modules added: ipsec.ko and tcpmd5.ko. New kernel
  option IPSEC_SUPPORT added. It enables support for loading
  and unloading of ipsec.ko and tcpmd5.ko kernel modules.
o IPSEC_NAT_T option was removed. Now NAT-T support is enabled by
  default. The UDP_ENCAP_ESPINUDP_NON_IKE encapsulation type
  support was removed. Added TCP/UDP checksum handling for
  inbound packets that were decapsulated by transport mode SAs.
  setkey(8) modified to show run-time NAT-T configuration of SA.
o New network pseudo interface if_ipsec(4) added. For now it is
  build as part of ipsec.ko module (or with IPSEC kernel).
  It implements IPsec virtual tunnels to create route-based VPNs.
o The network stack now invokes IPsec functions using special
  methods. The only one header file <netipsec/ipsec_support.h>
  should be included to declare all the needed things to work
  with IPsec.
o All IPsec protocols handlers (ESP/AH/IPCOMP protosw) were removed.
  Now these protocols are handled directly via IPsec methods.
o TCP_SIGNATURE support was reworked to be more close to RFC.
o PF_KEY SADB was reworked:
  - now all security associations stored in the single SPI namespace,
    and all SAs MUST have unique SPI.
  - several hash tables added to speed up lookups in SADB.
  - SADB now uses rmlock to protect access, and concurrent threads
    can do SA lookups in the same time.
  - many PF_KEY message handlers were reworked to reflect changes
    in SADB.
  - SADB_UPDATE message was extended to support new PF_KEY headers:
    SADB_X_EXT_NEW_ADDRESS_SRC and SADB_X_EXT_NEW_ADDRESS_DST. They
    can be used by IKE daemon to change SA addresses.
o ipsecrequest and secpolicy structures were cardinally changed to
  avoid locking protection for ipsecrequest. Now we support
  only limited number (4) of bundled SAs, but they are supported
  for both INET and INET6.
o INPCB security policy cache was introduced. Each PCB now caches
  used security policies to avoid SP lookup for each packet.
o For inbound security policies added the mode, when the kernel does
  check for full history of applied IPsec transforms.
o References counting rules for security policies and security
  associations were changed. The proper SA locking added into xform
  code.
o xform code was also changed. Now it is possible to unregister xforms.
  tdb_xxx structures were changed and renamed to reflect changes in
  SADB/SPDB, and changed rules for locking and refcounting.

Reviewed by:	gnn, wblock
Obtained from:	Yandex LLC
Relnotes:	yes
Sponsored by:	Yandex LLC
Differential Revision:	https://reviews.freebsd.org/D9352
2017-02-06 08:49:57 +00:00
Andrey V. Elsukov
7aeccebc0d Add net.inet6.ip6.intr_queue_maxlen sysctl. It can be used to
change netisr queue limit for IPv6 at runtime.

Obtained from:	Yandex LLC
MFC after:	2 weeks
Sponsored by:	Yandex LLC
2016-07-15 17:09:30 +00:00
George V. Neville-Neil
6d76822688 This change re-adds L2 caching for TCP and UDP, as originally added in D4306
but removed due to other changes in the system. Restore the llentry pointer
to the "struct route", and use it to cache the L2 lookup (ARP or ND6) as
appropriate.

Submitted by:	Mike Karels
Differential Revision:	https://reviews.freebsd.org/D6262
2016-06-02 17:51:29 +00:00
Alexander V. Chernikov
0d4df0290e Handle IPV6_PATHMTU option by spliting ip6_getpmtu_ctl() from ip6_getpmtu().
Add ro_mtu field to 'struct route' to be able to pass lookup MTU back to
  the caller.

Currently, ip6_getpmtu() has 2 totally different use cases:
1) control plane (IPV6_PATHMTU req), where we just need to calculate MTU
  and return it, w/o any reusability.
2) Actual ip6_output() data path where we (nearly) always use the provided
  route lookup data. If this data is not 'valid' we need to perform another
  lookup and save the result (which cannot be re-used by ip6_output()).

Given that, handle 1) by calling separate function doing rte lookup itself.
  Resulting MTU is calculated by (newly-added) ip6_calcmtu() used by both
  ip6_getpmtu_ctl() and ip6_getpmtu().
For 2) instead of storing ref'ed rte, store mtu (the only needed data
  from the lookup result) inside newly-added ro_mtu field.
  'struct route' was shrinked by 8(or 4 bytes) in r292978. Grow it again
  by 4 bytes. New ro_mtu field will be used in other places like
  ip/tcp_output (EMSGSIZE handling from output routines).

Reviewed by:	ae
2016-01-03 09:54:03 +00:00
Alexander V. Chernikov
4fb3a8208c Implement interface link header precomputation API.
Add if_requestencap() interface method which is capable of calculating
  various link headers for given interface. Right now there is support
  for INET/INET6/ARP llheader calculation (IFENCAP_LL type request).
  Other types are planned to support more complex calculation
  (L2 multipath lagg nexthops, tunnel encap nexthops, etc..).

Reshape 'struct route' to be able to pass additional data (with is length)
  to prepend to mbuf.

These two changes permits routing code to pass pre-calculated nexthop data
  (like L2 header for route w/gateway) down to the stack eliminating the
  need for other lookups. It also brings us closer to more complex scenarios
  like transparently handling MPLS nexthops and tunnel interfaces.
  Last, but not least, it removes layering violation introduced by flowtable
  code (ro_lle) and simplifies handling of existing if_output consumers.

ARP/ND changes:
Make arp/ndp stack pre-calculate link header upon installing/updating lle
  record. Interface link address change are handled by re-calculating
  headers for all lles based on if_lladdr event. After these changes,
  arpresolve()/nd6_resolve() returns full pre-calculated header for
  supported interfaces thus simplifying if_output().
Move these lookups to separate ether_resolve_addr() function which ether
  returs error or fully-prepared link header. Add <arp|nd6_>resolve_addr()
  compat versions to return link addresses instead of pre-calculated data.

BPF changes:
Raw bpf writes occupied _two_ cases: AF_UNSPEC and pseudo_AF_HDRCMPLT.
Despite the naming, both of there have ther header "complete". The only
  difference is that interface source mac has to be filled by OS for
  AF_UNSPEC (controlled via BIOCGHDRCMPLT). This logic has to stay inside
  BPF and not pollute if_output() routines. Convert BPF to pass prepend data
  via new 'struct route' mechanism. Note that it does not change
  non-optimized if_output(): ro_prepend handling is purely optional.
Side note: hackish pseudo_AF_HDRCMPLT is supported for ethernet and FDDI.
  It is not needed for ethernet anymore. The only remaining FDDI user is
  dev/pdq mostly untouched since 2007. FDDI support was eliminated from
  OpenBSD in 2013 (sys/net/if_fddisubr.c rev 1.65).

Flowtable changes:
  Flowtable violates layering by saving (and not correctly managing)
  rtes/lles. Instead of passing lle pointer, pass pointer to pre-calculated
  header data from that lle.

Differential Revision:	https://reviews.freebsd.org/D4102
2015-12-31 05:03:27 +00:00
Adrian Chadd
aaa46574b0 [netinet6]: Create a new IPv6 netisr which expects the frames to have been verified.
This is required for fragments and encapsulated data (eg tunneling) to be redistributed
to the RSS bucket based on the eventual IPv6 header and protocol (TCP, UDP, etc) header.

* Add an mbuf tag with the state of IPv6 options parsing before the frame is queued
  into the direct dispatch handler;
* Continue processing and complete the frame reception in the correct RSS bucket /
  netisr context.

Testing results are in the phabricator review.

Differential Revision:	https://reviews.freebsd.org/D3563
Submitted by:	Tiwei Bie <btw@mail.ustc.edu.cn>
2015-11-06 23:07:43 +00:00
Adrian Chadd
68bb8d6249 Add support for receiving flowtype, flowid and RSS bucket information as part of recvmsg().
Submitted by:	Tiwei Bie <btw@mail.ustc.edu.cn>
Differential Revision:	https://reviews.freebsd.org/D3562
2015-09-06 20:57:57 +00:00
Gleb Smirnoff
28ebe80cab Provide functions to determine presence of a given address
configured on a given interface.

Discussed with:	np
Sponsored by:	Nginx, Inc.
2015-04-17 11:57:06 +00:00
Gleb Smirnoff
20778ab5b4 Move ip6_sprintf() declaration from in6_var.h to in6.h. This is a simple
function that works with in6_addr and it is not related to the INET6
stack implementation.

Sponsored by:	Nginx, Inc.
2015-03-24 16:45:50 +00:00
Alexander V. Chernikov
670e8b3b8c Kill custom in_matroute() radix mathing function removing one rte mutex lock.
Initially in_matrote() in_clsroute() in their current state was introduced by
r4105 20 years ago. Instead of deleting inactive routes immediately, we kept them
in route table, setting RTPRF_OURS flag and some expire time. After that, either
GC came or RTPRF_OURS got removed on first-packet. It was a good solution
in that days (and probably another decade after that) to keep TCP metrics.
However, after moving metrics to TCP hostcache in r122922, most of in_rmx
functionality became unused. It might had been used for flushing icmp-originated
routes before rte mutexes/refcounting, but I'm not sure about that.

So it looks like this is nearly impossible to make GC do its work nowadays:

in_rtkill() ignores non-RTPRF_OURS routes.
route can only become RTPRF_OURS after dropping last reference via rtfree()
which calls in_clsroute(), which, it turn, ignores UP and non-RTF_DYNAMIC routes.

Dynamic routes can still be installed via received redirect, but they
have default lifetime (no specific rt_expire) and no one has another trie walker
to call RTFREE() on them.

So, the changelist:
* remove custom rnh_match / rnh_close matching function.
* remove all GC functions
* partially revert r256695 (proto3 is no more used inside kernel,
  it is not possible to use rt_expire from user point of view, proto3 support
  is not complete)
* Finish r241884 (similar to this commit) and remove remaining IPv6 parts

MFC after:	1 month
2014-11-11 02:52:40 +00:00
Alexander V. Chernikov
603eaf792b Renove faith(4) and faithd(8) from base. It looks like industry
have chosen different (and more traditional) stateless/statuful
NAT64 as translation mechanism. Last non-trivial commits to both
faith(4) and faithd(8) happened more than 12 years ago, so I assume
it is time to drop RFC3142 in FreeBSD.

No objections from:	net@
2014-11-09 21:33:01 +00:00
Michael Tuexen
76b96fbc9e Fix the checksum computation for UDPLite/IPv6. This requires the
usage of a function computing the checksum only over a part of the function.
Therefore introduce in6_cksum_partial() and implement in6_cksum() based
on that.
While there, ensure that the UDPLite packet contains at least enough bytes
to contain the header.

Reviewed by: kevlo
MFC after: 3 days
2014-10-02 10:32:24 +00:00
Andrey V. Elsukov
573791d01c * constify argument of in6_addrscope();
* use IN6_IS_ADDR_XXX() macro instead of hardcoded values;
* for multicast addresses just return scope value, the only exception
  is addresses with 0x0F scope value (RFC 4291 p2.7.0);

Obtained from:	Yandex LLC
Sponsored by:	Yandex LLC
2014-09-11 10:27:59 +00:00
Adrian Chadd
6e4405cee1 Add the IPv6 versions of the multi-bind, hash/hash type and RSS options. 2014-07-12 05:44:16 +00:00
Gleb Smirnoff
aa69c61235 Since both netinet/ and netinet6/ call into netipsec/ and netpfil/,
the protocol specific mbuf flags are shared between them.

- Move all M_FOO definitions into a single place: netinet/in6.h, to
  avoid future  clashes.
- Resolve clash between M_DECRYPTED and M_SKIP_FIREWALL which resulted
  in a failure of operation of IPSEC and packet filters.

Thanks to Nicolas and Georgios for all the hard work on bisecting,
testing and finally finding the root of the problem.

PR:			kern/186755
PR:			kern/185876
In collaboration with:	Georgios Amanakis <gamanakis gmail.com>
In collaboration with:	Nicolas DEFFAYET <nicolas-ml deffayet.com>
Sponsored by:		Nginx, Inc.
2014-03-12 14:29:08 +00:00
Hiroki Sato
7d26db1792 - Use time_uptime instead of time_second in data structures for
PF_INET6 in kernel.  This fixes various malfunction when the wall time
  clock is changed.  Bump __FreeBSD_version to 1000041.

- Use clock_gettime(CLOCK_MONOTONIC_FAST) in userland utilities.

MFC after:	1 month
2013-08-05 20:13:02 +00:00
Xin LI
6f56329a25 Remove __P.
Submitted by:	kevlo
Reviewed by:	md5(1)
MFC after:	2 months
2012-10-22 21:49:56 +00:00
Bjoern A. Zeeb
ecade87edf MFp4 bz_ipv6_fast:
Introduce a (for now copied stripped down) in6_cksum_pseudo()
  function.  We should be able to use this from in6_cksum() but
  we should also ponder possible MD specific improvements.
  It takes an extra csum argument to allow for easy checks as
  will be done by the upper layer protocol input paths.

  Sponsored by:	The FreeBSD Foundation
  Sponsored by:	iXsystems

Reviewed by:	gnn (as part of the whole)
MFC After:	3 days
2012-05-24 18:25:09 +00:00
Gleb Smirnoff
9c2ae3b1c8 Remove casts from inet6 address testing macros, thus preserving
qualifier from original argument.

Obtained from:	NetBSD, r. 1.67
Submitted by:	maxim
2012-01-26 12:04:19 +00:00
Kip Macy
1eeb6d97d0 Make KBI changes required for future MFCing of inpcb rtentry / llentry caching.
Reviewed by:	rwatson, bz
Approved by:	re (kib)
2011-09-20 20:27:26 +00:00
Hiroki Sato
049087a0f3 Add $ipv6_cpe_wanif to enable functionality required for IPv6 CPE
(r225485).  When setting an interface name to it, the following
configurations will be enabled:

 1. "no_radr" is set to all IPv6 interfaces automatically.

 2. "-no_radr accept_rtadv" will be set only for $ipv6_cpe_wanif.  This is
    done just before evaluating $ifconfig_IF_ipv6 in the rc.d scripts (this
    means you can manually supersede this configuration if necessary).

 3. The node will add RA-sending routers to the default router list
    even if net.inet6.ip6.forwarding=1.

This mode is added to conform to RFC 6204 (a router which connects
the end-user network to a service provider network).  To enable
packet forwarding, you still need to set ipv6_gateway_enable=YES.

Note that accepting router entries into the default router list when
packet forwarding capability and a routing daemon are enabled can
result in messing up the routing table.  To minimize such unexpected
behaviors, "no_radr" is set on all interfaces but $ipv6_cpe_wanif.

Approved by:	re (bz)
2011-09-13 00:06:11 +00:00
Bjoern A. Zeeb
90bc35de38 Add an in6_localip() helper function as in6_localaddr() is not doing what
people think: returning true for an address in any connected subnet, not
necessarily on the local machine.

Sponsored by:	Sandvine Incorporated
MFC after:	2 weeks
Approved by:	re (kib)
2011-08-20 16:43:47 +00:00
Hiroki Sato
e7fa8d0ada - Accept Router Advertisement messages even when net.inet6.ip6.forwarding=1.
- A new per-interface knob IFF_ND6_NO_RADR and sysctl IPV6CTL_NO_RADR.
  This controls if accepting a route in an RA message as the default route.
  The default value for each interface can be set by net.inet6.ip6.no_radr.
  The system wide default value is 0.

- A new sysctl: net.inet6.ip6.norbit_raif.  This controls if setting R-bit in
  NA on RA accepting interfaces.  The default is 0 (R-bit is set based on
  net.inet6.ip6.forwarding).

Background:

 IPv6 host/router model suggests a router sends an RA and a host accepts it for
 router discovery.  Because of that, KAME implementation does not allow
 accepting RAs when net.inet6.ip6.forwarding=1.  Accepting RAs on a router can
 make the routing table confused since it can change the default router
 unintentionally.

 However, in practice there are cases where we cannot distinguish a host from
 a router clearly.  For example, a customer edge router often works as a host
 against the ISP, and as a router against the LAN at the same time.  Another
 example is a complex network configurations like an L2TP tunnel for IPv6
 connection to Internet over an Ethernet link with another native IPv6 subnet.
 In this case, the physical interface for the native IPv6 subnet works as a
 host, and the pseudo-interface for L2TP works as the default IP forwarding
 route.

Problem:

 Disabling processing RA messages when net.inet6.ip6.forwarding=1 and
 accepting them when net.inet6.ip6.forward=0 cause the following practical
 issues:

 - A router cannot perform SLAAC.  It becomes a problem if a box has
   multiple interfaces and you want to use SLAAC on some of them, for
   example.  A customer edge router for IPv6 Internet access service
   using an IPv6-over-IPv6 tunnel sometimes needs SLAAC on the
   physical interface for administration purpose; updating firmware
   and so on (link-local addresses can be used there, but GUAs by
   SLAAC are often used for scalability).

 - When a host has multiple IPv6 interfaces and it receives multiple RAs on
   them, controlling the default route is difficult.  Router preferences
   defined in RFC 4191 works only when the routers on the links are
   under your control.

Details of Implementation Changes:

 Router Advertisement messages will be accepted even when
 net.inet6.ip6.forwarding=1.  More precisely, the conditions are as
 follow:

 (ACCEPT_RTADV && !NO_RADR && !ip6.forwarding)
	=> Normal RA processing on that interface. (as IPv6 host)

 (ACCEPT_RTADV && (NO_RADR || ip6.forwarding))
	=> Accept RA but add the router to the defroute list with
	   rtlifetime=0 unconditionally.  This effectively prevents
	   from setting the received router address as the box's
	   default route.

 (!ACCEPT_RTADV)
	=> No RA processing on that interface.

 ACCEPT_RTADV and NO_RADR are per-interface knob.  In short, all interface
 are classified as "RA-accepting" or not.  An RA-accepting interface always
 processes RA messages regardless of ip6.forwarding.  The difference caused by
 NO_RADR or ip6.forwarding is whether the RA source address is considered as
 the default router or not.

 R-bit in NA on the RA accepting interfaces is set based on
 net.inet6.ip6.forwarding.  While RFC 6204 W-1 rule (for CPE case) suggests
 a router should disable the R-bit completely even when the box has
 net.inet6.ip6.forwarding=1, I believe there is no technical reason with
 doing so.  This behavior can be set by a new sysctl net.inet6.ip6.norbit_raif
 (the default is 0).

Usage:

 # ifconfig fxp0 inet6 accept_rtadv
	=> accept RA on fxp0
 # ifconfig fxp0 inet6 accept_rtadv no_radr
	=> accept RA on fxp0 but ignore default route information in it.
 # sysctl net.inet6.ip6.norbit_no_radr=1
	=> R-bit in NAs on RA accepting interfaces will always be set to 0.
2011-06-06 02:14:23 +00:00
Bernd Walter
cae54c668c correct variable type name in comment 2011-04-25 09:00:52 +00:00
Rebecca Cran
6bccea7c2b Fix typos - remove duplicate "the".
PR:	bin/154928
Submitted by:	Eitan Adler <lists at eitanadler.com>
MFC after: 	3 days
2011-02-21 09:01:34 +00:00
Pawel Jakub Dawidek
f44270e764 - Rename IP_NONLOCALOK IP socket option to IP_BINDANY, to be more consistent
with OpenBSD (and BSD/OS originally). We can't easly do it SOL_SOCKET option
  as there is no more space for more SOL_SOCKET options, but this option also
  fits better as an IP socket option, it seems.
- Implement this functionality also for IPv6 and RAW IP sockets.
- Always compile it in (don't use additional kernel options).
- Remove sysctl to turn this functionality on and off.
- Introduce new privilege - PRIV_NETINET_BINDANY, which allows to use this
  functionality (currently only unjail root can use it).

Discussed with:	julian, adrian, jhb, rwatson, kmacy
2009-06-01 10:30:00 +00:00
Bruce M Simpson
29dc7bc636 Merge final round of MLD changes from p4:
ip6_input.c, in6.h:
 * Add netinet6-specific mbuf flag M_RTALERT_MLD, shadowing M_PROTO6.
  * Always set this flag if HBH Router Alert option is present for MLD,
    even when not forwarding.

 icmp6.c:
 * In icmp6_input(), spell m->m_pkthdr.rcvif as ifp to be consistent.
 * Use scope ID for verifying input. Do not apply SSM filters here, no inpcb.
  * Check for M_RTALERT_MLD when validating MLD traffic, as we can't see
    IPv6 hop options outside of ip6_input().

 in6_mcast.c:
 * Use KAME scope/zone ID in in6_multi.
   * Update net.inet6.ip6.mcast.filters implementation to use scope IDs
     for comparisons.
 * Fix scope ID treatment in multicast socket option processing.
   Scope IDs passed in from userland will be ignored as other less
   ambiguous APIs exist for specifying the link.
 * Tighten userland input checks in IPv6 SSM delta and full-state ops.
   * Source filter embedded scope IDs need to be revisited, for now
     just clear them and ignore them on input.
 * Adapt KAME behaviour of looking up the scope ID in the default zone
   for multicast leaves, when the interface is ambiguous.

 mld6.c:
 * Tighten origin checks on MLD traffic as per RFC3810 Section 6.2:
  * ip6_src MAY be the unspecified address for MLDv1 reports.
  * ip6_src MAY have link-local address scope for MLDv1 reports,
    MLDv1 queries, and MLDv2 queries.
  * Perform address field validation *before* accepting queries.
 * Use KAME scope/zone ID in query/report processing.
   * Break const correctness for mld_v1_input_report(), mld_v1_input_query()
     as we temporarily modify the input mbuf chain.
   * Clear the scope ID before handoff to userland MLD daemon.
 * Fix MLDv1 old querier present timer processing.
   With the protocol defaults, hosts should revert to MLDv2 after 260s.
 * Add net.inet6.mld.v1enable sysctl, default to on.

 ifmcstat.c:
 * Use sysctl by default; -K requests kvm(3) if so compiled.

 mld.4:
 * Connect man page to build.

Tested using PCS.
2009-05-27 18:57:13 +00:00
Bruce M Simpson
ba970783a9 Add IN6ADDR_LINKLOCAL_ALLV2ROUTERS_INIT, in6addr_linklocal_allv2routers
for use by MLDv2.
Add IPv6 SSM socket layer membership vector size constants and
tree bounds.
Remove unreferenced struct ipv6_mreq_source; SSM for IPv6 goes
straight to the RFC 3678 socket options.
2009-04-29 10:22:44 +00:00
Kip Macy
de4ab55e43 add an llentry to struct route{_in6} to allow it to be passed around with
the rtentry
2009-04-15 20:34:19 +00:00
Colin Percival
29a6d781af Default to ignoring potentially evil IPv6 Neighbor Solicitation
messages.

Approved by:    so (cperciva)
Approved by:	re (kensmith)
Security:       FreeBSD-SA-08:10.nd6
Thanks to:      jinmei, bz
2008-10-02 00:32:59 +00:00
David E. O'Brien
b48287a32a Clean up VCS Ids. 2007-12-10 16:03:40 +00:00
Bjoern A. Zeeb
8accf26fea Restore behavior changed with rev. 1.46 and make
IPV6_IPSEC_POLICY always visible again. This unbreaks some
third party user space applications.

PR:		114491
Reported by:	sumikawa
Reviewed by:	sumikawa
Approved by:	re (hrs)
2007-07-19 09:16:40 +00:00
Xin LI
2a463222be Space cleanup
Approved by:	re (rwatson)
2007-07-05 16:29:40 +00:00
Xin LI
1272577e22 ANSIfy[1] plus some style cleanup nearby.
Discussed with:	gnn, rwatson
Submitted by:	Karl Sj?dahl - dunceor <dunceor gmail com> [1]
Approved by:	re (rwatson)
2007-07-05 16:23:49 +00:00
Max Laier
60ee384760 Link pf 4.1 to the build:
- move ftp-proxy from libexec to usr.sbin
 - add tftp-proxy
 - new altq mtag link

Approved by:	re (kensmith)
2007-07-03 12:46:08 +00:00
George V. Neville-Neil
b2630c2934 Commit the change from FAST_IPSEC to IPSEC. The FAST_IPSEC
option is now deprecated, as well as the KAME IPsec code.
What was FAST_IPSEC is now IPSEC.

Approved by: re
Sponsored by: Secure Computing
2007-07-03 12:13:45 +00:00
George V. Neville-Neil
2cb64cb272 Commit IPv6 support for FAST_IPSEC to the tree.
This commit includes only the kernel files, the rest of the files
will follow in a second commit.

Reviewed by:    bz
Approved by:    re
Supported by:   Secure Computing
2007-07-01 11:41:27 +00:00
Bruce M Simpson
71498f308b Import rewrite of IPv4 socket multicast layer to support source-specific
and protocol-independent host mode multicast. The code is written to
accomodate IPv6, IGMPv3 and MLDv2 with only a little additional work.

This change only pertains to FreeBSD's use as a multicast end-station and
does not concern multicast routing; for an IGMPv3/MLDv2 router
implementation, consider the XORP project.

The work is based on Wilbert de Graaf's IGMPv3 code drop for FreeBSD 4.6,
which is available at: http://www.kloosterhof.com/wilbert/igmpv3.html

Summary
 * IPv4 multicast socket processing is now moved out of ip_output.c
   into a new module, in_mcast.c.
 * The in_mcast.c module implements the IPv4 legacy any-source API in
   terms of the protocol-independent source-specific API.
 * Source filters are lazy allocated as the common case does not use them.
   They are part of per inpcb state and are covered by the inpcb lock.
 * struct ip_mreqn is now supported to allow applications to specify
   multicast joins by interface index in the legacy IPv4 any-source API.
 * In UDP, an incoming multicast datagram only requires that the source
   port matches the 4-tuple if the socket was already bound by source port.
   An unbound socket SHOULD be able to receive multicasts sent from an
   ephemeral source port.
 * The UDP socket multicast filter mode defaults to exclusive, that is,
   sources present in the per-socket list will be blocked from delivery.
 * The RFC 3678 userland functions have been added to libc: setsourcefilter,
   getsourcefilter, setipv4sourcefilter, getipv4sourcefilter.
 * Definitions for IGMPv3 are merged but not yet used.
 * struct sockaddr_storage is now referenced from <netinet/in.h>. It
   is therefore defined there if not already declared in the same way
   as for the C99 types.
 * The RFC 1724 hack (specify 0.0.0.0/8 addresses to IP_MULTICAST_IF
   which are then interpreted as interface indexes) is now deprecated.
 * A patch for the Rhyolite.com routed in the FreeBSD base system
   is available in the -net archives. This only affects individuals
   running RIPv1 or RIPv2 via point-to-point and/or unnumbered interfaces.
 * Make IPv6 detach path similar to IPv4's in code flow; functionally same.
 * Bump __FreeBSD_version to 700048; see UPDATING.

This work was financially supported by another FreeBSD committer.

Obtained from:  p4://bms_netdev
Submitted by:   Wilbert de Graaf (original work)
Reviewed by:    rwatson (locking), silence from fenner,
		net@ (but with encouragement)
2007-06-12 16:24:56 +00:00
David Malone
fe12457335 This comment on various IPPORT_ defines was copied from in.h and
probably never fully applied to IPv6. Over time it has become more
stale, so replace it with something more up to date.

Reviewed by:	ume
MFC after:	1 month
2006-03-28 12:51:22 +00:00
SUZUKI Shinsuke
e381ac4daa updates net.inet6.ip6.kame_version as the proof of the latest KAME merge
Reviewed by: KAME
MFC after: 2 days
2006-03-19 02:11:42 +00:00
SUZUKI Shinsuke
743eee666f sync with KAME regarding NDP
- introduced fine-grain-timer to manage ND-caches and IPv6 Multicast-Listeners
- supports Router-Preference <draft-ietf-ipv6-router-selection-07.txt>
- better prefix lifetime management
- more spec-comformant DAD advertisement
- updated RFC/internet-draft revisions

Obtained from: KAME
Reviewed by: ume, gnn
MFC after: 2 month
2005-10-21 16:23:01 +00:00
SUZUKI Shinsuke
c1a049ac20 sync with KAME (removed a unnecesary non-standard macro)
Obtained from: KAME
Reviewd by: ume, gnn
2005-10-19 16:53:24 +00:00
Hajimu UMEMOTO
5af09736a8 added a knob to enable path MTU discovery for multicast packets.
(by default, it is disabled)

Submitted by:	suz
Obtained from:	KAME
2005-08-13 19:55:06 +00:00
SUZUKI Shinsuke
f8a8f9ca5e supports stealth forwarding in IPv6, as well as in IPv4
PR: kern/54625
MFC after: 1 week
2005-08-10 09:13:35 +00:00
Hajimu UMEMOTO
a1f7e5f8ee scope cleanup. with this change
- most of the kernel code will not care about the actual encoding of
  scope zone IDs and won't touch "s6_addr16[1]" directly.
- similarly, most of the kernel code will not care about link-local
  scoped addresses as a special case.
- scope boundary check will be stricter.  For example, the current
  *BSD code allows a packet with src=::1 and dst=(some global IPv6
  address) to be sent outside of the node, if the application do:
    s = socket(AF_INET6);
    bind(s, "::1");
    sendto(s, some_global_IPv6_addr);
  This is clearly wrong, since ::1 is only meaningful within a single
  node, but the current implementation of the *BSD kernel cannot
  reject this attempt.

Submitted by:	JINMEI Tatuya <jinmei__at__isl.rdc.toshiba.co.jp>
Obtained from:	KAME
2005-07-25 12:31:43 +00:00