Commit Graph

190 Commits

Author SHA1 Message Date
Jordan K. Hubbard
a2048b9c26 Sync to reality for the Gravis Ultrasound MAX card. 1995-08-01 07:05:16 +00:00
Justin T. Gibbs
4fbaf9a7c0 Add examples for wiring down scbuses to drivers as well as specifying
controller buses for multi-bus controllers.
1995-07-17 23:32:53 +00:00
Joerg Wunsch
446cee6e6d Include ``options POWERFAIL_NMI'' for owners of older (non-apm)
notebooks where a powerfail condition (external power drop; battery
state low) is signalled by an NMI.  Makes it beep instead of panicing.

Reviewed by:	davidg
1995-07-16 10:31:26 +00:00
Bruce Evans
567e21c2c0 Add tw. 1995-07-16 08:55:04 +00:00
Bruce Evans
7fbcd76bb5 Enable pcvt in LINT and don't generate a compile time error if syscons
and pcvt are both configured when LINT is defined.  There will be a
link time error instead.  This is to test building of pcvt more often.
1995-07-11 17:20:20 +00:00
Doug Rabson
975c53c7b0 Add an option to the psm driver to skip the parts of the probe which break
some laptops with PS/2 mice.

Submitted by:	nsayer@quack.kfu.com
1995-06-22 10:56:56 +00:00
Rodney W. Grimes
265368d4f1 Submitted by: dufault
LINT talks about about 2.1.  I changed that to 2.0.5,
and clarified why certain devices need "at scbus?".

There is still a crazy "PCVT=210" which shouldn't be there,
but corrected comment as it is needed for 2.0.5.
1995-05-28 13:24:16 +00:00
David Greenman
b8e91dab53 Update swap and dump stuff to match reality:
- option DODUMP no longer exists (remove all references to it).
- directive `swap on' is now a no-op (don't bother documenting it; remove
  comment to match code).
- directive `dumps on' still works (restore code to match comment; deprecate
  it in comment).

Reviewed by:	Poul-Henning Kamp, and me
Submitted by:	Bruce Evans
1995-05-27 04:32:12 +00:00
David Greenman
5eb46edfb0 Added "BROKEN_KEYBOARD_RESET" option to disable using the keyboard reset
in cpu_reset(). Some MBs don't deal with this properly.

Submitted by:	Rod Grimes
1995-05-18 09:17:07 +00:00
David Greenman
a401ebbe32 Changed swap partition handling/allocation so that it doesn't
require specific partitions be mentioned in the kernel config
file ("swap on foo" is now obsolete).

From Poul-Henning:

The visible effect is this:

As default, unless
        options "NSWAPDEV=23"
is in your config, you will have four swap-devices.
You can swapon(2) any block device you feel like, it doesn't have
to be in the kernel config.

There is a performance/resource win available by getting the NSWAPDEV right
(but only if you have just one swap-device ??), but using that as default
would be too restrictive.

The invisible effect is that:

Swap-handling disappears from the $arch part of the kernel.
It gets a lot simpler (-145 lines) and cleaner.

Reviewed by:	John Dyson, David Greenman
Submitted by:	Poul-Henning Kamp, with minor changes by me.
1995-05-14 03:00:10 +00:00
Andrey A. Chernov
d0930614cc Add 'rc' line 1995-05-12 15:17:55 +00:00
Jordan K. Hubbard
9cc347481f Remove all vestiges of the ALLOW_CONFLICT_FOO evil and replace it with
something slightly less evil - a per device conflict flag.
1995-05-11 02:15:55 +00:00
Joerg Wunsch
85827d9c13 Restructured the floppy tape probe.
The ``flags 1'' in the fdc line is now only needed for owners of an
Insight tape (perhaps there aren't any?  Mine is disfunctional).  All
other probes are safe wrt. to the motor-control line of floppy disk
drives.  Document the flag in LINT finally.
1995-05-06 19:34:28 +00:00
David Greenman
f73bbaf2fa Fix spelling error. Commented out ISO and ISO related things until I
either fix it or we decide to remove it. It requires implementing PCB
hashing to get it to compile and likely a lot more to get it to work..
1995-05-05 07:47:44 +00:00
Peter Dufault
657e73c4f5 Add National Instruments "LabPC" driver 1995-04-28 00:51:40 +00:00
Poul-Henning Kamp
d52d7365c6 Document MFS_ROOT option. 1995-04-25 03:44:04 +00:00
Poul-Henning Kamp
d3f4d460f8 Added "bio" to matcd. 1995-04-24 05:33:59 +00:00
John Dyson
e3dd31586c Removed the NSECS_MULTI option, and implemented both 32 bit probe
enable and multi-sector I/O enable by using the controller or device
flags capability.  Per a suggestion by phk.
1995-04-24 04:30:19 +00:00
Garrett Wollman
1a7c583c01 Substantially clean up LINT and add `fe'. 1995-04-23 18:30:27 +00:00
John Dyson
5b920a895d Document the wd.c option NSECS_MULTI. 1995-04-22 22:39:33 +00:00
Andrey A. Chernov
b6b8f81ead Add quotes around TUNE_1542 1995-04-18 11:02:22 +00:00
Peter Dufault
8909a72b5d Add "sctarg" and document new SCSI_REPORT_GEOMETRY option for ache 1995-04-14 15:12:24 +00:00
Poul-Henning Kamp
e5f2c8f67e Add "BREAK_TO_DEBUGGER" option. 1995-04-12 22:02:51 +00:00
Poul-Henning Kamp
63373752ea Move default address of lnc0 to 0x300. Luigi Rizzo said that his card
cannot even go below 0x300...
1995-04-08 21:41:52 +00:00
Andrey A. Chernov
017e602c0c pca: change IO_PPI to IO_TIMER1 due to syscons conflict 1995-04-08 16:08:35 +00:00
Joerg Wunsch
fe696eb64c Update pcvt to 3.20 b24 1995-04-08 15:49:25 +00:00
Poul-Henning Kamp
12cfa43650 Added the "eg0" interface driver for the 3Com "3c505" or "etherlink/+"
card.  This is the braindamaged card with the 80186 CPU on it.  It is
slow, probably not very good after all, but hey, if you have one lying
around doing nothing anyway...

Added the "zp0" driver to GENERIC.
1995-04-08 09:36:04 +00:00
Andrey A. Chernov
e64ae15d3a Add port IO_PPI for pca per Bruce suggestion 1995-04-06 14:01:20 +00:00
Jordan K. Hubbard
0264a8a9c6 0x330 is the default address for SB Midi, not 0x300
Submitted by:	Doug Rabson <dfr@render.com>
1995-04-06 03:22:12 +00:00
Rodney W. Grimes
ad0c439a34 Submitted by: Mahesh Neelakanta <mahesh@gcomm.com>
Change I/O address of Intel EtherExpress driver (ix0) from 0x280 to
0x300.
1995-03-30 00:20:08 +00:00
David Greenman
e5e6090541 Added NQNFS option and a comment warning about it's overhead. 1995-03-29 05:14:22 +00:00
Jordan K. Hubbard
9829c3ed2e Change ahc driver comment to note that it's not just the 274x controller
it supports.
1995-03-28 08:14:55 +00:00
Rodney W. Grimes
f8e028be26 Add Intel EtherExpress16 (ix0) driver.
Reviewed by:
Submitted by:
Obtained from:
1995-03-18 08:12:48 +00:00
Peter Dufault
de6a307ec7 Document scsi options 1995-03-15 14:27:01 +00:00
David Greenman
d41f24e742 Added support for generic FDDI and the DEC DEFEA and DEFPA FDDI adapters.
Submitted by:	Matt Thomas
1995-03-14 09:16:07 +00:00
Steven Wallace
a91ccb55cf Change device entry examples to reflect the following:
Remove PAS-only entry for OPL as ache pointed out.
Update OPL comment to show OPL-2 or OPL-3 support as it is auto-detected.
1995-03-13 18:49:37 +00:00
Steven Wallace
12fd08535f Remove old snd file configuration list and add new file list
for the snd controller and the different sound devices.

Update LINT to include all sound device drivers using new format.

Reviewed by:	wollman
1995-03-12 23:43:15 +00:00
Bruce Evans
133d0cef4e Fix config-time syntax errors in sound options. 1995-03-12 12:18:43 +00:00
Ugen J.S. Antsilevich
7332d95a98 Restore IPACCT out there.. 1995-03-06 10:33:34 +00:00
Joerg Wunsch
68cfe626f7 pcvt is still using the XSERVER option; document this. 1995-03-05 22:23:35 +00:00
Jordan K. Hubbard
ca83dc2de1 Upgrade the sound drivers to VoxWare pre-3.0 and fix a number of bugs.
Make the sound configuration a little neater
	(see /sys/i386/isa/sound/Readme.freebsd)
Add support for the Microsoft Sound Source.
Document the sound options again.
Submitted by:	Sujal Patel <smpatel@wam.umd.edu>
Obtained from:	Voxware
1995-03-04 21:11:21 +00:00
Jordan K. Hubbard
05e1d9d455 Changes to incorporate the Matsushita CDROM driver (otherwise known as
the "Sound blaster CDROM").
Submitted by:	Frank Durda IV <bsdmail@nemesis.lonestar.org>
1995-03-02 04:07:03 +00:00
Peter Dufault
ebc1a0e2f8 Added a little documentation on the fixed SCSI config and
fixed a few quirks that snuck in.
1995-03-01 22:27:45 +00:00
Bruce Evans
226d4c89da Make diskslice files standard and remove option DISKSLICE. ufs_disksubr.c
needed a diskslice function yesterday and all disk drivers will need it.
The diskslice initialization routine should be configurable (but isn't).
1995-02-23 17:19:54 +00:00
Jordan K. Hubbard
f1f0a0bf8b Remove the SCSI idsn line - it's permanantly dead. 1995-02-19 14:07:28 +00:00
Jordan K. Hubbard
f1f041888e Remove the ISDN dialer from LINT until it's working. 1995-02-17 09:33:29 +00:00
Poul-Henning Kamp
648c711bb4 This is the latest version of the APM stuff from HOSOKAWA, I have looked
briefly over it, and see some serious architectural issues in this stuff.

On the other hand, I doubt that we will have any solution to these issues
before 2.1, so we might as well leave this in.

Most of the stuff is bracketed by #ifdef's so it shouldn't matter too much
in the normal case.

Reviewed by:	phk
Submitted by:	HOSOKAWA, Tatsumi <hosokawa@mt.cs.keio.ac.jp>
1995-02-17 02:22:57 +00:00
Jordan K. Hubbard
f2eea8100f We can enable pcd0 when we actually have one. 1995-02-15 06:18:15 +00:00
Jordan K. Hubbard
a46a6df7e5 Comment out snic0 until it gets updated to the newer scsi code. 1995-02-15 04:49:18 +00:00
Jordan K. Hubbard
6f96f72b16 Add ISDN entries to LINT. 1995-02-15 00:53:15 +00:00