sys/dev/mpr/mpr_mapping.c
If _mapping_process_dpm_pg0 detects inconsistencies in the drive
mapping table (stored in the HBA's NVRAM), abort reading it and
continue to boot as if the mapping table were blank. I observed
such inconsistencies in several HBAs after upgrading firmware from
14.0.0.0 to 15.0.0.0.
Reviewed by: slm
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D12901
instead of malloc(). The SWAP objects are automagically freed when there are no
more consumers. This greatly simplifies the mmap logic inside CUSE(3) in the
kernel. This change fixes an issue where mmapped memory can accumulate and never
get freed, if many different mmap sizes are needed over time. Further this
change fixes memory leaks when the CUSE(3) kernel module is unloaded.
While at it make sure the CUSE_ALLOC_PAGES_MAX limit is treated as an exclusive
limit. CUSE(3) memory maps must be less than CUSE_ALLOC_PAGES_MAX number of pages.
Reviewed by: kib @
Differential Revision: https://reviews.freebsd.org/D11392
Sponsored by: Mellanox Technologies
MFC after: 1 week
This pointer is checked during the linux_dev_open() callback and does
not need to be NULL checked again. It should always be set for
character devices belonging to the "linuxcdevsw" and technically
there is no need to NULL check this pointer at all.
Suggested by: kib @
MFC after: 1 week
Sponsored by: Mellanox Technologies
key_updateaddresses() is used to update SA addresses and NAT-T
configuration in SADB_UPDATE message. This is done using cloning SA
content from old SA into new one. But addresses and NAT-T configuration
are taking from SADB_UPDATE message. Use newsa pointer to set NAT-T
properties into cloned SA.
PR: 223382
MFC after: 1 week
fine when a lot of different flows to be ciphered/deciphered are involved.
However, when a software crypto driver is used, there are
situations where we could benefit from making crypto(9) multi threaded:
- a single flow is to be ciphered: only one thread is used to cipher it,
- a single ESP flow is to be deciphered: only one thread is used to
decipher it.
The idea here is to call crypto(9) using a new mode (CRYPTO_F_ASYNC) to
dispatch the crypto jobs on multiple threads, if the underlying crypto
driver is working in synchronous mode.
Another flag is added (CRYPTO_F_ASYNC_KEEPORDER) to make crypto(9)
dispatch the crypto jobs in the order they are received (an additional
queue/thread is used), so that the packets are reinjected in the network
using the same order they were posted.
A new sysctl net.inet.ipsec.async_crypto can be used to activate
this new behavior (disabled by default).
Submitted by: Emeric Poupon <emeric.poupon@stormshield.eu>
Reviewed by: ae, jmg, jhb
Differential Revision: https://reviews.freebsd.org/D10680
Sponsored by: Stormshield
gcc complains "cast to pointer from integer of different size". phandle_t is
*always* a uint32_t, so treat it as such, not as a pointer. Fixes 64-bit build.
emulation in fast path of data/prefetch abort common routine. Process
these bits only if related page table entries are consistent with
provided abort info. In case of inconsistency, do nothing and let
processor to signal new abort if still needed.
The mapping related to an abort may be a subject of change concurrently.
The situation is more evident on multicore machines. Mapping may be
removed on one core while being used on another one before TLB flush
happened. Memory swapping process may be an example. Or, two or more
aborts may be signaled for the same page on more cores concurrently.
While an abort on one core may cause a promotion of related mapping,
an abort on another core may be inconsistent then as related mapping
was promoted. A question is how much real the issue may be on single
core machine. However, it's better to play safe even for these machines.
This change may solve some "PT2MAP abort" panics reported rarely.
The revision of pmap_fault() was initiated thanks to stack backtrace
provided by Bob Prohaska (fbsd at www.zefox.net).
While here, INVARIANTS block was changed. The previous check had iffy
value as only one entry from many was checked from L2 page table.
Reviewed by: mmel
MFC after: 3 weeks
The generic (naive) implementation of posix_fallocate cannot provide the
standard mandated guarantee that overwrites would never fail due to the lack
of free space. The fundamental reason is the copy-on-write architecture
of ZFS. Other features like compression and deduplication can also
increase the size difference between the (pre-)allocated dummy content
and the future content.
So, until ZFS can properly implement the feature it's better to report
that it is unsupported rather than providing an ersatz implementation.
Please note that EINVAL is used to report that the underlying file system
does not support the operation (POSIX.1-2008).
illumos and ZoL seem to do the same.
MFC after: 3 weeks
Sponsored by: Panzura
Using the same implementation as done in efi/boot1. We must handle smaller
than sector size IO etc.
Differential Revision: https://reviews.freebsd.org/D12850
Include ridx <-> rate conversion functions from rtwn(4) +
reuse already calculated value for ieee80211_radiotap(9).
Tested with Asus USB-N10, STA mode.
Some events can take sound pitch as a value so can not be represented
as binary on/off events. Tracking for on/off state is left in place
as it is a part of the evdev API.
Reviewed by: gonzo
Approved by: gonzo (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D12676
- Do not report T-axis wheel events as button presses
- Reverse T-axis to match Linux
- Remove wrong comment. T-axis buttons state should be checked by level not
by edge to allow continuous wheel tilt reporting
Reviewed by: gonzo
Approved by: gonzo (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D12676
w/o EVDEV_SUPPORT as it's value has no meaning in this case.
Now presence of this sysctl can be used for discovery if evdev support
for hybrid devices is compiled into kernel or not.
Hide "kern.evdev.sysmouse_t_axis" sysctl for the same reason.
Reviewed by: gonzo
Approved by: gonzo (mentor)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D12676
The strategy() calls are assuming 512B sectors, so we need to adjust the
offset accordingly.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D12849
In reclaim_pv_chunk(), rotate the pv chunks list so that next
invocations of the reclaim do not scan the same pv chunks that could
not be freed. Only do the rotation when there is no parallel scan,
tracked by active_reclaims counter.
To rotate, move all chunks that are before current iteration marker,
after another marker that is inserted at the list tail on start of the
reclaim.
Reviewed by: alc
Tested by: pho (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
The VNET_SYSUNINIT() callback is executed after the MOD_UNLOAD. That means
that netisr_unregister() has already been called when
netisr_unregister_vnet() gets calls, leading to an assertion failure.
Restore the expected order of operations by performing everything that
was done in MOD_UNLOAD to a SYSUNINIT() (that will be called after the
VNET_SYSUNINIT()).
Differential Revision: https://reviews.freebsd.org/D12771
The r195005 unlocked pmc_sx before calling into pmclog_configure_log()
to avoid the LOR, but it allows flush or closelog to run in parallel
with the configuration, causing many failure modes.
Revert r195005. Pre-create the logging process, allowing it to run
after the set up succeeded, otherwise the process terminates itself.
Reported and tested by: pho
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D12882
hwpmc(4) must not voluntarily call fo_close(), doing this causes
double-close of the file. It seems to almost avoid bad consequences
for pipes, but other types of files demonstrate random memory access.
To fix, remove fo_close() calls, which also do not provide the
declared wake-up of waiters consistently. Instead, send a signal to
the logger and configure the logger process to not block it. Since
logger never returns to userspace, the signal only causes termination
of the interruptible sleeps in fo_write().
Reported and tested by: pho
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
X-Differential revision: https://reviews.freebsd.org/D12882
This geom does not immediately detach its consumer relying on the
wither-washer to do that. Since that happens asynchronously we may get
additional spoiling events. So, we need to account for that.
There are multiple options for fixing this issue like detaching
immediately or checking for G_CF_ORPHAN in g_slice_spoiled().
The most reliable and least intrusive fix seems to be setting
geom->softc to NULL on the first call and checking for NULL on
subsequent calls. This is something that the code did before r325227.
Reported by: David Wolfskill <david@catwhisker.org>,
O. Hartmann <o.hartmann@walstatt.org>
Tested by: David Wolfskill <david@catwhisker.org> (earlier version)
Discussed with: mav
MFC after: 1 week
X-MFC with: r325227
Some callers of fpusetregs()/npxsetregs(), most importantly
set_fpcontext(), clear reserved bits. But some did not. Do the
clearing in fpusetregs() and remove now redundand operation from
set_fpcontext().
Reported by: Maxime Villard <max@m00nbsd.net>
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
This is the extra key on 102/105-keys keyboards, located on the right
of the Left Shift key. For instance on a French layout, this is the '<'
key.
This fixes an issue where the key fires no evdev event and thus remains
inactive in an evdev/libinput-enabled X.Org server. The issue only
occurred on an AT keyboard; the same key on a USB keyboard worked fine.
PR: 222609 (only for reference)
Approved by: wulf@
Differential Revision: https://reviews.freebsd.org/D12883
It is used on each new entry addition to decide whether to whack an existing
negative entry in order to prevent a blow out in size, but the parameter was
set years ago and never revisited.
Building with poudriere results in about 400 evictions per second which
unnecessarily grab entries from the hot list.
With the new parameter there are next to no evictions of the sort.
This brings it closer to par with GENERIC64. In the future I hope to have a
GENERIC64-E and GENERIC-E kernels as Book-E analogues to the GENERIC64/GENERIC
AIM kernels.
This is needed for the HDA emulation with FreeBSD guests.
Reviewed by: marcelo
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D12832
Some devices (P5040, P4080) have multiple frame managers in their DPAA
subsystems. This was prevented by use of a softc singleton in the DPAA
driver. Since if_dtsec(4) has moved to be a child of fman, it can access
the fman device data via the parent object.
largest alignment the ITS can require.
This fixes a bug with the ARM Architecture Envelope Model (AEM) where it
only allows 64k pages so will fail to attach the ITS device when this table
is not sufficiently aligned.
Sponsored by: DARPA, AFRL