passed in from u-boot across the call to self_reloc and any other early-init
code, and restore them before calling main().
The self_reloc() routine uses r0 and r1 (and calling it uses lr), and
depending on what values get left in them, main() would intermittantly lock
up trying to interpret them as argc and argv values. This problem affected
the self-relocatable ubldr.bin but not ubldr (the elf version).
FreeBSD's DTS contained only one PL050 node and driver considered it to
be PS/2 keyboard. In reality PL050 is a PS/2 port that pushes bytes to/from
the periphers connected to it. New DTS contains two nodes and QEMU emulates
keyboard connected to port #0 and mouse connected to port #1. Since there
is no way to say what's connected to port by checking DTS we hardcode
this knowledge in the driver: it assumes keyboard on port #0 and ignores
port #1 altogether.
Also QEMU defaults emulated keyboard to scan code set 2 while driver used
to work with scan code set 1 so when initializing driver make sure keyboard
is switched to scan code set 1
Scope of this change is somewhat larger than just converting to INTRNG.
The reason for this is that INTRNG support required switching from custom
to upstream DTS because custom DTS didn't have interrup routing information.
This switch caused rewrite of PCI and CLCD drivers and adding SCM module.
List of changes in this commit:
- Enable INTRNG and switch to versatile-pb.dts
- Add SCM driver that controls various peripheral devices like LCD or
PCI controller. Previously registers required for power-up and
configuring peripherals were part of their respective nodes. Upstream
DTS has dedicated node for SCM
- Convert PL190 driver to INTRNG
- Convert Versatile SIC (secondary interrupt controller) to INTRNG
- Refactor CLCD driver to use SCM API to power up and configuration
- Refactor PCI driver to use SCM API to enable controller
- Refactor PCI driver to use interrupt map provided in DTS for
interrupt routing. As a result it fixes broken IRQ routing and
it's no longer required to run QEMU with "-global versatile_pci.broken-irq-mapping=1"
command-line arguments
This patch adds a general mechanism for providing encryption keys to the
kernel from the boot loader. This is intended to enable GELI support at
boot time, providing a better mechanism for passing keys to the kernel
than environment variables. It is designed to be extensible to other
applications, and can easily handle multiple encrypted volumes with
different keys.
This mechanism is currently used by the pending GELI EFI work.
Additionally, this mechanism can potentially be used to interface with
GRUB, opening up options for coreboot+GRUB configurations with completely
encrypted disks.
Another benefit over the existing system is that it does not require
re-deriving the user key from the password at each boot stage.
Most of this patch was written by Eric McCorkle. It was extended by
Allan Jude with a number of minor enhancements and extending the keybuf
feature into boot2.
GELI user keys are now derived once, in boot2, then passed to the loader,
which reuses the key, then passes it to the kernel, where the GELI module
destroys the keybuf after decrypting the volumes.
Submitted by: Eric McCorkle <eric@metricspace.net> (Original Version)
Reviewed by: oshogbo (earlier version), cem (earlier version)
MFC after: 3 weeks
Relnotes: yes
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D9575
Multiple periodic scripts sleep for a random amount of time in order to
mitigate the thundering herd problem. This is bad, because the sum of
multiple uniformly distributed random variables approaches a normal
distribution, so the problem isn't mitigated as effectively as it would be
with a single sleep.
This change creates a single configurable anticongestion sleep. periodic
will only sleep if at least one script requires it, and it will never sleep
more than once per invocation. It also won't sleep if periodic was run
interactively, fixing an unrelated longstanding bug.
PR: 217055
PR: 210188
Reviewed by: cy
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D10211
compiler-time type checking, and also causes problems for targets where
multiple incompatible calling conventions may be selected based on argument
types. This change switches less(1) to ANSI prototypes.
While there, we also remove use of "register", and attempt to use "const" a
bit better now that the compiler can check argument types.
Reviewed by: cem, emaste
MFC after: 3 weeks
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D10152
Improve existing BGX detection and adjust it to support both
new and older ThunderX firmwares. Match BGX FDT nodes by name
and reg. Match PHY instances by qlm-mode and name.
Tested on Firmware Version: 2016-09-30 09:12:11
Obtained from: Semihalf
Differential Revision: https://reviews.freebsd.org/D9863
As posix_fadvise() does not lock the vnode argument, don't capture
detailed vnode information for the time being.
Obtained from: TrustedBSD Project
MFC after: 3 weeks
Sponsored by: DARPA, AFRL
This requires minor changes to the audit framework to allow capturing
paths that are not filesystem paths (i.e., will not be canonicalised
relative to the process current working directory and/or filesystem
root).
Obtained from: TrustedBSD Project
MFC after: 3 weeks
Sponsored by: DARPA, AFRL
external action is completed, but the rule search is continued.
External action handler can change the content of @args argument,
that is used for dynamic state lookup. Enforce the new lookup to be able
install new state, when the search is continued.
Obtained from: Yandex LLC
MFC after: 1 week
Sponsored by: Yandex LLC
If a jail has an explicitly assigned IPv6 loopback address then allow it
to be used instead of remapping requests for the loopback adddress to the
first IPv6 address assigned to the jail.
This fixes issues where applications attempt to detect their bound port
where they requested a loopback address, which was available, but instead
the kernel remapped it to the jails first address.
This is the same fix applied to IPv4 fix by: r316313
Also:
* Correct the description of prison_check_ip6_locked to match the code.
MFC after: 2 weeks
Relnotes: Yes
Sponsored by: Multiplay
top(1) read the wrong amount of data from sysctl, uint64_t instead of
boolean_t, resulting in the stats not showing in many cases.
X-MFC-With: r315435
Sponsored by: ScaleEngine Inc.
If a jail has an explicitly assigned loopback address then allow it to be
used instead of remapping requests for the loopback adddress to the first
IPv4 address assigned to the jail.
This fixes issues where applications attempt to detect their bound port
where they requested a loopback address, which was available, but instead
the kernel remapped it to the jails first address.
A example of this is binding nginx to 127.0.0.1 and then running "service
nginx upgrade" which before this change would cause nginx to fail.
Also:
* Correct the description of prison_check_ip4_locked to match the code.
MFC after: 2 weeks
Relnotes: Yes
Sponsored by: Multiplay
In GELI, anywhere we are zeroing out possibly sensitive data, like
the metadata struct, the metadata sector (both contain the encrypted
master key), the user key, or the master key, use explicit_bzero.
Didn't touch the bzero() used to initialize structs.
Reviewed by: delphij, oshogbo
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D9809
Make sure sensitive memory is properly cleared when finished with it
Reviewed by: Eric McCorkle <eric@metricspace.net>
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D9798
Fallback to Linux video interface bindings introduced in r313068 worked
with then current DTS but that DTS turned out to be not conformant to
the the bindings spec. DTS import in r314854 fixed the conformancy but
broke the functionality. This commit syncs up functionality to the actual
spec.
Reported by: manu@
AUE_PROCCTL, AUE_SENDFILE, AUE_ACL_*, and AUE_POSIX_FALLOCATE.
Audit AUE_SHMUNLINK path in the path token rather than as a
text string, and AUE_SHMOPEN flags as an integer token rather
than a System V IPC address token.
Obtained from: TrustedBSD Project
MFC after: 3 weeks
Sponsored by: DARPA, AFRL
We have parallel NFSv2 and NFSv3 reader implementations, only configurable at
build time, defaulting to v3. Remove v2.
Reviewed by: allanjude
Approved by: allanjude (mentor)
Differential Revision: https://reviews.freebsd.org/D10206
resulting in a process dumping core in the corefile.
Also extend procstat to view select members of 'struct ptrace_lwpinfo'
from the contents of the note.
Sponsored by: Dell EMC Isilon
Also make sure that the renewal is never more than 1/2 * expiry and
rebind never more than 7/4 * renewal (the default values in the spec).
This should allow adjusting high values from the server as well as
making sure the values from the server make sense.
Renewal and rebind times will be adjusted down if the expiry time is set
very high in a server, not the other way around. This change just makes
sure the values keep making sense.
The current efi_zfs_probe() is overcomplicated and can be made
simpler. Still we need to pick up the device handle for our boot
disk first, because the ESP does not have to be the first partition on the
disk.
Once we do have the handle for boot disk, we probe that disk with
pointer for pool GUID.
Reviewed by: allanjude
Approved by: allanjude (mentor)
Differential Revision: https://reviews.freebsd.org/D10198
While testing 32bit UEFI OVMF (which has bug about how the disk size
is presented), I did witness the errors from blkio->ReadBlocks().
It became apparent we can not entirely trust UEFI interfaces either,
so additional checks are needed.
So we use disk_ioctl(DIOCGMEDIASIZE) for disks, with fallback of
Media->LastBlock for other media.
In addition, we need to check if there is media present.
+ small fixes for error printout, and avoiding multiple blk * 512.
Reviewed by: allanjude
Approved by: allanjude (mentor)
Differential Revision: https://reviews.freebsd.org/D10197
definitions for the DTrace audit provider, so that the dtaudit module
can compile in the absence of kernel DTrace support. This doesn't
really make run-time sense (since the binary dependencies for the
module won't be present), but it allows the dtaudit module to compile
successfully regardless of the kernel configuration.
MFC after: 3 weeks
Sponsored by: DARPA, AFRL
Reported by: kib
Restore the stock (upstream) code under an #else block, so it's easier
for me to visualize and understand the code that needs to be upstreamed.
MFC after: 2 months
X-MFC with: r316178, r316179, r316180
Sponsored by: Dell EMC Isilon
The prerequisite for '#if __EXT1_VISIBLE' functionality is the
inclusion of sys/cdefs.h. errno.h only auto-includes the header for
non-kernel environment, and EXT1 block only useful for non-kernel as
well.
Reported by: lwhsu
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
9899:2011 Appendix K 3.7.4.1.
Other needed supporting types, defines and constraint_handler
infrastructure is added as specified in the C11 spec.
Submitted by: Tom Rix <trix@juniper.net>
Sponsored by: Juniper Networks
Discussed with: ed
MFC after: 3 weeks
Differential revision: https://reviews.freebsd.org/D9903
Differential revision: https://reviews.freebsd.org/D10161
The goal of this work is to remove the explicit dependency for ctl(4)
on iscsi(4), so end-users without iscsi(4) support in the kernel can
use ctl(4) for its other functions.
This allows those without iscsi(4) support built into the kernel to use
ctl(4) as a test mechanism. As a sidenote, this was possible around the
10.0-RELEASE period, but made impossible for end-users without iscsi(4)
between 10.0-RELEASE and 11.0-RELEASE.
Automatically load cfiscsi(4) from ctladm(8) and ctld(8) for backwards
compatibility with previously releases. The automatic loading feature is
compiled into the beforementioned tools if MK_ISCSI == yes when building
world.
Add a manpage for cfiscsi(4) and refer to it in ctl(4).
Differential Revision: D10099
MFC after: 2 months
Relnotes: yes
Reviewed by: mav, trasz
Sponsored by: Dell EMC Isilon
